/linux/Documentation/devicetree/bindings/pinctrl/ |
H A D | semtech,sx1501q.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 4 --- 6 $schema: http://devicetree.org/meta-schemas/core.yaml# 11 - Neil Armstrong <neil.armstrong@linaro.org> 16 - semtech,sx1501q 17 - semtech,sx1502q 18 - semtech,sx1503q 19 - semtech,sx1504q 20 - semtech,sx1505q 21 - semtech,sx1506q [all …]
|
H A D | nuvoton,wpcm450-pinctrl.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 3 --- 4 $id: http://devicetree.org/schemas/pinctrl/nuvoton,wpcm450-pinctrl.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Jonathan Neuschäfer <j.neuschaefer@gmx.net> 14 const: nuvoton,wpcm450-pinctrl 19 '#address-cells': 22 '#size-cells': 31 "^gpio@[0-7]$": 44 gpio-controller: true [all …]
|
/linux/drivers/regulator/ |
H A D | lp8788-buck.c | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * TI LP8788 MFD - buck regulator driver 92 struct gpio_desc *gpio1; member 104 struct lp8788_buck1_dvs *dvs = (struct lp8788_buck1_dvs *)buck->dvs; in lp8788_buck1_set_dvs() 110 pinstate = dvs->vsel == DVS_SEL_V0 ? DVS_LOW : DVS_HIGH; in lp8788_buck1_set_dvs() 111 gpiod_set_value(buck->gpio1, pinstate); in lp8788_buck1_set_dvs() 116 struct lp8788_buck2_dvs *dvs = (struct lp8788_buck2_dvs *)buck->dvs; in lp8788_buck2_set_dvs() 122 switch (dvs->vsel) { in lp8788_buck2_set_dvs() 143 gpiod_set_value(buck->gpio1, pin1); in lp8788_buck2_set_dvs() 144 gpiod_set_value(buck->gpio2, pin2); in lp8788_buck2_set_dvs() [all …]
|
/linux/sound/pci/hda/ |
H A D | cs35l41_hda_property.c | 1 // SPDX-License-Identifier: GPL-2.0 25 int reset_gpio_index; /* -1 if no reset gpio */ 26 int spkid_gpio_index; /* -1 if no spkid gpio */ 27 int cs_gpio_index; /* -1 if no cs gpio, or cs-gpios already exists, max num amps == 2 */ 36 { "10280BEB", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, -1, 0, 0, 0, 0 }, 37 …{ "10280C4D", 4, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, CS35L41_LEFT, CS35L41_RIGHT }, 0, 1, -1,… 41 * Since this laptop has valid ACPI, we do not need to handle cs-gpios, since that already exists 44 { "103C89C6", 2, INTERNAL, { CS35L41_RIGHT, CS35L41_LEFT, 0, 0 }, -1, -1, -1, 1000, 4500, 24 }, 45 { "103C8A28", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 }, 46 { "103C8A29", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 }, [all …]
|
H A D | patch_cirrus.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later 66 /* Vendor-specific processing widget */ 79 * 1 = digital immediate, analog zero-cross 80 * 2 = digtail & analog soft-ramp 81 * 3 = digital soft-ramp, analog zero-cross 85 #define CS_COEF_ADC_LI_SZC_MODE (3 << 0) /* SZC setup for line-in */ 86 /* PGA mode: 0 = differential, 1 = signle-ended */ 88 #define CS_COEF_ADC_LI_PGA_MODE (1 << 6) /* PGA setup for line-in */ 92 * 1 = zero-cross 93 * 2 = soft-ramp [all …]
|
H A D | cs35l41_hda.c | 1 // SPDX-License-Identifier: GPL-2.0 37 #define CS35L41_UUID "50d90cdc-3de4-4f18-b528-c7fe3b71f40d" 89 { CS35L41_SP_HIZ_CTRL, 0x00000002 }, // Hi-Z unused 111 { CS35L41_SP_HIZ_CTRL, 0x00000003 }, // Hi-Z unused/disabled 146 /* Filename is the same as the tuning file with "cfg" suffix */ in cs35l41_request_tuning_param_file() 149 return -ENOMEM; in cs35l41_request_tuning_param_file() 151 ret = firmware_request_nowarn(firmware, *filename, cs35l41->dev); in cs35l41_request_tuning_param_file() 153 dev_dbg(cs35l41->dev, "Failed to request '%s'\n", *filename); in cs35l41_request_tuning_param_file() 166 const char * const dsp_name = cs35l41->cs_dsp.name; in cs35l41_request_firmware_file() 170 if (spkid > -1 && ssid && amp_name) in cs35l41_request_firmware_file() [all …]
|
H A D | patch_conexant.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later 7 * Tobin Davis <tdavis@dsl-only.net> 63 spec->gen.beep_nid = nid; in set_beep_amp() 65 knew = snd_hda_gen_add_kctl(&spec->gen, NULL, in set_beep_amp() 68 return -ENOMEM; in set_beep_amp() 69 knew->private_value = beep_amp; in set_beep_amp() 76 struct conexant_spec *spec = codec->spec; in cx_auto_parse_beep() 95 struct conexant_spec *spec = codec->spec; in cx_auto_parse_eapd() 103 spec->eapds[spec->num_eapds++] = nid; in cx_auto_parse_eapd() 104 if (spec->num_eapds >= ARRAY_SIZE(spec->eapds)) in cx_auto_parse_eapd() [all …]
|
H A D | patch_analog.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later 6 * Copyright (c) 2005-2007 Takashi Iwai <tiwai@suse.de> 44 ((spec)->beep_amp = HDA_COMPOSE_AMP_VAL(nid, 1, idx, dir)) /* mono */ 52 struct ad198x_spec *spec = codec->spec; in create_beep_ctls() 55 if (!spec->beep_amp) in create_beep_ctls() 58 for (knew = ad_beep_mixer ; knew->name; knew++) { in create_beep_ctls() 63 return -ENOMEM; in create_beep_ctls() 64 kctl->private_value = spec->beep_amp; in create_beep_ctls() 80 !codec->inv_eapd ? 0x00 : 0x02); in ad198x_power_eapd_write() 83 !codec->inv_eapd ? 0x00 : 0x02); in ad198x_power_eapd_write() [all …]
|
/linux/Documentation/devicetree/bindings/net/can/ |
H A D | tcan4x5x.txt | 7 - compatible: 11 - reg: 0 12 - #address-cells: 1 13 - #size-cells: 0 14 - spi-max-frequency: Maximum frequency of the SPI bus the chip can 16 - interrupt-parent: the phandle to the interrupt controller which provides 18 - interrupts: interrupt specification for data-ready. 24 - reset-gpios: Hardwired output GPIO. If not defined then software 26 - device-state-gpios: Input GPIO that indicates if the device is in 29 - device-wake-gpios: Wake up GPIO to wake up the TCAN device. Not [all …]
|
/linux/arch/arm/boot/dts/nxp/imx/ |
H A D | imx6ull-dhcom-drc02.dts | 1 // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause 6 * DHCM-iMX6ULL-C080-R051-F0409-SPI-E2-CAN2-SD-RTC-ADC-I-01D2 7 * DHCOR PCB number: 578-200 or newer 8 * DHCOM PCB number: 579-200 or newer 9 * DRC02 PCB number: 568-100 or newer (2nd ethernet by SoM) 11 /dts-v1/; 13 #include "imx6ull-dhcom-som.dtsi" 14 #include "imx6ull-dhcom-som-cfg-sdcard.dtsi" 18 compatible = "dh,imx6ull-dhcom-drc02", "dh,imx6ull-dhcom-som", 19 "dh,imx6ull-dhcor-som", "fsl,imx6ull"; [all …]
|
H A D | imx6-logicpd-baseboard.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 7 compatible = "gpio-keys"; 9 button-0 { 13 debounce-interval = <10>; 14 wakeup-source; 17 button-1 { 21 debounce-interval = <10>; 22 wakeup-source; 25 button-2 { 29 debounce-interval = <10>; [all …]
|
H A D | imx6qdl-sabresd.dtsi | 1 // SPDX-License-Identifier: GPL-2.0+ 6 #include <dt-bindings/clock/imx6qdl-clock.h> 7 #include <dt-bindings/gpio/gpio.h> 8 #include <dt-bindings/input/input.h> 12 stdout-path = &uart1; 20 reg_usb_otg_vbus: regulator-usb-otg-vbus { 21 compatible = "regulator-fixed"; 22 regulator-name = "usb_otg_vbus"; 23 regulator-min-microvolt = <5000000>; 24 regulator-max-microvolt = <5000000>; [all …]
|
/linux/arch/arm64/boot/dts/freescale/ |
H A D | imx8mq-librem5.dtsi | 1 // SPDX-License-Identifier: GPL-2.0+ 3 * Copyright 2018-2020 Purism SPC 6 /dts-v1/; 8 #include "dt-bindings/input/input.h" 9 #include <dt-bindings/interrupt-controller/irq.h> 10 #include <dt-bindings/leds/common.h> 11 #include "dt-bindings/pwm/pwm.h" 12 #include "dt-bindings/usb/pd.h" 18 chassis-type = "handset"; 20 backlight_dsi: backlight-dsi { [all …]
|
/linux/include/dt-bindings/sound/ |
H A D | cs35l45.h | 1 /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ 3 * cs35l45.h -- CS35L45 ALSA SoC audio driver DT bindings header 12 * cirrus,asp-sdout-hiz-ctrl 14 * TX_HIZ_UNUSED: TX pin high-impedance during unused slots. 15 * TX_HIZ_DISABLED: TX pin high-impedance when all channels disabled. 21 * Optional GPIOX Sub-nodes: 22 * The cs35l45 node can have up to three "cirrus,gpio-ctrlX" ('X' = [1,2,3]) 23 * sub-nodes for configuring the GPIO pins. 25 * - gpio-dir : GPIO pin direction. Valid only when 'gpio-ctrl' 30 * - gpio-lvl : GPIO level. Valid only when 'gpio-ctrl' is 1 and 'gpio-dir' is 0. [all …]
|
/linux/Documentation/devicetree/bindings/sound/ |
H A D | cirrus,cs35l45.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Ricardo Rivera-Matos <rriveram@opensource.cirrus.com> 11 - Richard Fitzgerald <rf@opensource.cirrus.com> 18 - $ref: dai-common.yaml# 23 - cirrus,cs35l45 31 '#sound-dai-cells': 34 reset-gpios: 37 vdd-a-supply: [all …]
|
/linux/drivers/pinctrl/ |
H A D | pinctrl-rockchip.c | 1 // SPDX-License-Identifier: GPL-2.0-only 8 * With some ideas taken from pinctrl-samsung: 14 * and pinctrl-at91: 15 * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 30 #include <linux/pinctrl/pinconf-generic.h> 37 #include <dt-bindings/pinctrl/rockchip.h> 41 #include "pinctrl-rockchip.h" 67 { .offset = -1 }, \ 68 { .offset = -1 }, \ 69 { .offset = -1 }, \ [all …]
|
H A D | pinctrl-keembay.c | 1 // SPDX-License-Identifier: GPL-2.0 12 #include <linux/pinctrl/pinconf-generic.h> 61 * struct keembay_mux_desc - Mux properties of each GPIO pin 83 * struct keembay_gpio_irq - Config of each GPIO Interrupt sources 84 * @source: Interrupt source number (0 - 7) 99 * struct keembay_pinctrl - Intel Keembay pinctrl structure 131 * struct keembay_pin_soc - Pin control config data based on SoC 148 KEEMBAY_PIN_DESC(1, "GPIO1", 890 unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); in keembay_gpio_invert() 899 keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_MODE, pin); in keembay_gpio_invert() [all …]
|
/linux/sound/soc/codecs/ |
H A D | tlv320adc3xxx.c | 1 // SPDX-License-Identifier: GPL-2.0-only 8 // Copyright (C) 2014-2018, Ambarella, Inc. 15 #include <dt-bindings/sound/tlv320adc3xxx.h> 33 #include <sound/soc-dapm.h> 59 * Setting the clock source using simple-card (clocks or 60 * system-clock-frequency property) sets clk_id = 0 = ADC3XXX_PLL_AUTO. 78 /* 2-3 Reserved */ 86 /* 9-17 Reserved */ 93 /* 23-24 Reserved */ 109 /* 39-41 Reserved */ [all …]
|
/linux/sound/soc/intel/boards/ |
H A D | bytcr_rt5640.c | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * byt_cr_dpcm_rt5640.c - ASoc Machine driver for Intel Byt CR platform 29 #include <sound/soc-acpi.h> 30 #include <dt-bindings/sound/rt5640.h> 32 #include "../atom/sst-atom-controls.h" 33 #include "../common/soc-intel-quirks.h" 74 #define BYT_RT5640_DIFF_MIC BIT(18) /* default is single-ended */ 95 /* in-diff or dmic-pin + jdsrc + ovcd-th + -sf + jd-inv + terminating entry */ 109 static int quirk_override = -1; 111 MODULE_PARM_DESC(quirk, "Board-specific quirk override"); [all …]
|
/linux/drivers/pinctrl/nuvoton/ |
H A D | pinctrl-npcm7xx.c | 1 // SPDX-License-Identifier: GPL-2.0 2 // Copyright (c) 2016-2018 Nuvoton Technology corporation. 21 #include <linux/pinctrl/pinconf-generic.h> 51 #define NPCM7XX_GP_N_PU 0x1c /* Pull-up */ 52 #define NPCM7XX_GP_N_PD 0x20 /* Pull-down */ 110 raw_spin_lock_irqsave(&gc->bgpio_lock, flags); in npcm_gpio_set() 115 raw_spin_unlock_irqrestore(&gc->bgpio_lock, flags); in npcm_gpio_set() 124 raw_spin_lock_irqsave(&gc->bgpio_lock, flags); in npcm_gpio_clr() 129 raw_spin_unlock_irqrestore(&gc->bgpio_lock, flags); in npcm_gpio_clr() 136 seq_printf(s, "-- module %d [gpio%d - %d]\n", in npcmgpio_dbg_show() [all …]
|
/linux/arch/arm64/boot/dts/qcom/ |
H A D | sm8450.dtsi | 1 // SPDX-License-Identifier: BSD-3-Clause 6 #include <dt-bindings/interrupt-controller/arm-gic.h> 7 #include <dt-bindings/clock/qcom,gcc-sm8450.h> 8 #include <dt-bindings/clock/qcom,rpmh.h> 9 #include <dt-bindings/clock/qcom,sm8450-camcc.h> 10 #include <dt-bindings/clock/qcom,sm8450-dispcc.h> 11 #include <dt-bindings/clock/qcom,sm8450-gpucc.h> 12 #include <dt-bindings/clock/qcom,sm8450-videocc.h> 13 #include <dt-bindings/dma/qcom-gpi.h> 14 #include <dt-bindings/firmware/qcom,scm.h> [all …]
|
/linux/arch/arm64/boot/dts/nvidia/ |
H A D | tegra210-p3450-0000.dts | 1 // SPDX-License-Identifier: GPL-2.0 2 /dts-v1/; 4 #include <dt-bindings/input/gpio-keys.h> 5 #include <dt-bindings/input/linux-event-codes.h> 6 #include <dt-bindings/mfd/max77620.h> 12 compatible = "nvidia,p3450-0000", "nvidia,tegra210"; 22 stdout-path = "serial0:115200n8"; 33 hvddio-pex-supply = <&vdd_1v8>; 34 dvddio-pex-supply = <&vdd_pex_1v05>; 35 vddio-pex-ctl-supply = <&vdd_1v8>; [all …]
|
/linux/arch/arm64/boot/dts/renesas/ |
H A D | beacon-renesom-baseboard.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 6 #include <dt-bindings/gpio/gpio.h> 7 #include <dt-bindings/input/input.h> 8 #include <dt-bindings/clock/versaclock.h> 11 backlight_lvds: backlight-lvds { 12 compatible = "pwm-backlight"; 13 power-supply = <®_lcd>; 14 enable-gpios = <&gpio_exp1 3 GPIO_ACTIVE_HIGH>; 16 brightness-levels = <0 4 8 16 32 64 128 255>; 17 default-brightness-level = <6>; [all …]
|
/linux/arch/arm/boot/dts/ti/keystone/ |
H A D | keystone-k2g.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 5 * Copyright (C) 2016-2017 Texas Instruments Incorporated - https://www.ti.com/ 8 #include <dt-bindings/interrupt-controller/arm-gic.h> 9 #include <dt-bindings/pinctrl/keystone.h> 10 #include <dt-bindings/gpio/gpio.h> 15 #address-cells = <2>; 16 #size-cells = <2>; 17 interrupt-parent = <&gic>; 32 #address-cells = <1>; 33 #size-cells = <0>; [all …]
|
/linux/drivers/media/pci/cx23885/ |
H A D | cx23885-video.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later 9 #include "cx23885-video.h" 23 #include <media/v4l2-common.h> 24 #include <media/v4l2-ioctl.h> 25 #include <media/v4l2-event.h> 26 #include "cx23885-ioctl.h" 29 #include <media/drv-intf/cx25840.h> 35 /* ------------------------------------------------------------------ */ 37 static unsigned int video_nr[] = {[0 ... (CX23885_MAXBOARDS - 1)] = UNSET }; 38 static unsigned int vbi_nr[] = {[0 ... (CX23885_MAXBOARDS - 1)] = UNSET }; [all …]
|