/linux/Documentation/devicetree/bindings/thermal/ |
H A D | qoriq-thermal.yaml | 20 Register (IPBRR0) at offset 0x0BF8. 24 0x01900102 T1040 82 reg = <0xf0000 0x1000>; 83 interrupts = <18 2 0 0>; 84 fsl,tmu-range = <0x000a0000 0x00090026 0x0008004a 0x0001006a>; 85 fsl,tmu-calibration = <0x00000000 0x00000025>, 86 <0x00000001 0x00000028>, 87 <0x00000002 0x0000002d>, 88 <0x00000003 0x00000031>, 89 <0x00000004 0x00000036>, [all …]
|
/linux/arch/sh/boards/mach-ecovec24/ |
H A D | sdram.S | 23 ED 0xFD000010, 0x00000000 /* DBEN */ 24 ED 0xFD000040, 0x00000000 /* DBRFPDN0 */ 25 ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */ 26 ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */ 27 ED 0xFD000040, 0x00000001 /* DBRFPDN0 */ 43 ED 0xFD000040, 0x00000000 /* DBRFPDN0 */ 45 ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */ 46 ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */ 47 ED 0xFD000010, 0x00000001 /* DBEN */ 48 ED 0xFD000040, 0x00010000 /* DBRFPDN0 */ [all …]
|
/linux/arch/sh/boards/mach-se/7724/ |
H A D | sdram.S | 23 ED 0xFD000010, 0x00000000 /* DBEN */ 24 ED 0xFD000040, 0x00000000 /* DBRFPDN0 */ 25 ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */ 26 ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */ 27 ED 0xFD000040, 0x00000001 /* DBRFPDN0 */ 43 ED 0xFD000040, 0x00000000 /* DBRFPDN0 */ 45 ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */ 46 ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */ 47 ED 0xFD000010, 0x00000001 /* DBEN */ 48 ED 0xFD000040, 0x00010000 /* DBRFPDN0 */ [all …]
|
/linux/arch/mips/sgi-ip22/ |
H A D | ip22-eisa.c | 45 #define EIU_MODE_REG 0x0001ffc0 46 #define EIU_STAT_REG 0x0001ffc4 47 #define EIU_PREMPT_REG 0x0001ffc8 48 #define EIU_QUIET_REG 0x0001ffcc 49 #define EIU_INTRPT_ACK 0x00010004 58 for (i = 0; i < 4; i++) { in decode_eisa_sig() 61 if (!i && (sig[0] & 0x80)) in decode_eisa_sig() 65 sig_str[0] = ((sig[0] >> 2) & 0x1f) + ('A' - 1); in decode_eisa_sig() 66 sig_str[1] = (((sig[0] & 3) << 3) | (sig[1] >> 5)) + ('A' - 1); in decode_eisa_sig() 67 sig_str[2] = (sig[1] & 0x1f) + ('A' - 1); in decode_eisa_sig() [all …]
|
/linux/include/soc/bcm2835/ |
H A D | raspberrypi-firmware.h | 15 RPI_FIRMWARE_STATUS_REQUEST = 0, 16 RPI_FIRMWARE_STATUS_SUCCESS = 0x80000000, 17 RPI_FIRMWARE_STATUS_ERROR = 0x80000001, 37 RPI_FIRMWARE_PROPERTY_END = 0, 38 RPI_FIRMWARE_GET_FIRMWARE_REVISION = 0x00000001, 40 RPI_FIRMWARE_SET_CURSOR_INFO = 0x00008010, 41 RPI_FIRMWARE_SET_CURSOR_STATE = 0x00008011, 43 RPI_FIRMWARE_GET_BOARD_MODEL = 0x00010001, 44 RPI_FIRMWARE_GET_BOARD_REVISION = 0x00010002, 45 RPI_FIRMWARE_GET_BOARD_MAC_ADDRESS = 0x00010003, [all …]
|
/linux/include/scsi/ |
H A D | srp.h | 48 SRP_LOGIN_REQ = 0x00, 49 SRP_TSK_MGMT = 0x01, 50 SRP_CMD = 0x02, 51 SRP_I_LOGOUT = 0x03, 52 SRP_LOGIN_RSP = 0xc0, 53 SRP_RSP = 0xc1, 54 SRP_LOGIN_REJ = 0xc2, 55 SRP_T_LOGOUT = 0x80, 56 SRP_CRED_REQ = 0x81, 57 SRP_AER_REQ = 0x82, [all …]
|
/linux/lib/crypto/ |
H A D | des.c | 31 0x00, 0x00, 0x40, 0x04, 0x10, 0x10, 0x50, 0x14, 32 0x04, 0x40, 0x44, 0x44, 0x14, 0x50, 0x54, 0x54, 33 0x02, 0x02, 0x42, 0x06, 0x12, 0x12, 0x52, 0x16, 34 0x06, 0x42, 0x46, 0x46, 0x16, 0x52, 0x56, 0x56, 35 0x80, 0x08, 0xc0, 0x0c, 0x90, 0x18, 0xd0, 0x1c, 36 0x84, 0x48, 0xc4, 0x4c, 0x94, 0x58, 0xd4, 0x5c, 37 0x82, 0x0a, 0xc2, 0x0e, 0x92, 0x1a, 0xd2, 0x1e, 38 0x86, 0x4a, 0xc6, 0x4e, 0x96, 0x5a, 0xd6, 0x5e, 39 0x20, 0x20, 0x60, 0x24, 0x30, 0x30, 0x70, 0x34, 40 0x24, 0x60, 0x64, 0x64, 0x34, 0x70, 0x74, 0x74, [all …]
|
/linux/drivers/net/ipa/reg/ |
H A D | gsi_reg-v4.11.c | 14 0x0000c020 + 0x1000 * GSI_EE_AP); 17 0x0000c024 + 0x1000 * GSI_EE_AP); 20 [CHTYPE_PROTOCOL] = GENMASK(2, 0), 32 0x0000f000 + 0x4000 * GSI_EE_AP, 0x80); 35 [CH_R_LENGTH] = GENMASK(19, 0), 40 0x0000f004 + 0x4000 * GSI_EE_AP, 0x80); 42 REG_STRIDE(CH_C_CNTXT_2, ch_c_cntxt_2, 0x0000f008 + 0x4000 * GSI_EE_AP, 0x80); 44 REG_STRIDE(CH_C_CNTXT_3, ch_c_cntxt_3, 0x0000f00c + 0x4000 * GSI_EE_AP, 0x80); 47 [WRR_WEIGHT] = GENMASK(3, 0), 58 REG_STRIDE_FIELDS(CH_C_QOS, ch_c_qos, 0x0000f05c + 0x4000 * GSI_EE_AP, 0x80); [all …]
|
H A D | gsi_reg-v4.9.c | 14 0x0000c020 + 0x1000 * GSI_EE_AP); 17 0x0000c024 + 0x1000 * GSI_EE_AP); 20 [CHTYPE_PROTOCOL] = GENMASK(2, 0), 32 0x0000f000 + 0x4000 * GSI_EE_AP, 0x80); 35 [CH_R_LENGTH] = GENMASK(19, 0), 40 0x0000f004 + 0x4000 * GSI_EE_AP, 0x80); 42 REG_STRIDE(CH_C_CNTXT_2, ch_c_cntxt_2, 0x0000f008 + 0x4000 * GSI_EE_AP, 0x80); 44 REG_STRIDE(CH_C_CNTXT_3, ch_c_cntxt_3, 0x0000f00c + 0x4000 * GSI_EE_AP, 0x80); 47 [WRR_WEIGHT] = GENMASK(3, 0), 58 REG_STRIDE_FIELDS(CH_C_QOS, ch_c_qos, 0x0000f05c + 0x4000 * GSI_EE_AP, 0x80); [all …]
|
H A D | gsi_reg-v4.5.c | 14 0x0000c020 + 0x1000 * GSI_EE_AP); 17 0x0000c024 + 0x1000 * GSI_EE_AP); 20 [CHTYPE_PROTOCOL] = GENMASK(2, 0), 32 0x0000f000 + 0x4000 * GSI_EE_AP, 0x80); 35 [CH_R_LENGTH] = GENMASK(15, 0), 40 0x0000f004 + 0x4000 * GSI_EE_AP, 0x80); 42 REG_STRIDE(CH_C_CNTXT_2, ch_c_cntxt_2, 0x0000f008 + 0x4000 * GSI_EE_AP, 0x80); 44 REG_STRIDE(CH_C_CNTXT_3, ch_c_cntxt_3, 0x0000f00c + 0x4000 * GSI_EE_AP, 0x80); 47 [WRR_WEIGHT] = GENMASK(3, 0), 57 REG_STRIDE_FIELDS(CH_C_QOS, ch_c_qos, 0x0000f05c + 0x4000 * GSI_EE_AP, 0x80); [all …]
|
/linux/drivers/virt/vboxguest/ |
H A D | vmmdev.h | 17 #define VMMDEV_PORT_OFF_REQUEST 0 50 #define VMMDEV_EVENT_MOUSE_CAPABILITIES_CHANGED BIT(0) 72 #define VMMDEV_EVENT_VALID_EVENT_MASK 0x000007ffU 79 #define VMMDEV_VERSION 0x00010004 81 #define VMMDEV_VERSION_MINOR (VMMDEV_VERSION & 0xffff) 87 #define VMMDEV_REQUEST_HEADER_VERSION 0x10001 124 #define VMMDEV_MOUSE_GUEST_CAN_ABSOLUTE BIT(0) 155 #define VMMDEV_MOUSE_RANGE_MIN 0 157 #define VMMDEV_MOUSE_RANGE_MAX 0xFFFF 181 #define VMMDEV_HVF_HGCM_PHYS_PAGE_LIST BIT(0) [all …]
|
/linux/drivers/gpu/drm/amd/include/asic_reg/gc/ |
H A D | gc_9_0_default.h | 26 #define mmGRBM_CNTL_DEFAULT 0x00000018 27 #define mmGRBM_SKEW_CNTL_DEFAULT 0x00000020 28 #define mmGRBM_STATUS2_DEFAULT 0x00000000 29 #define mmGRBM_PWR_CNTL_DEFAULT 0x00000000 30 #define mmGRBM_STATUS_DEFAULT 0x00000000 31 #define mmGRBM_STATUS_SE0_DEFAULT 0x00000000 32 #define mmGRBM_STATUS_SE1_DEFAULT 0x00000000 33 #define mmGRBM_SOFT_RESET_DEFAULT 0x00000000 34 #define mmGRBM_CGTT_CLK_CNTL_DEFAULT 0x00000100 35 #define mmGRBM_GFX_CLKEN_CNTL_DEFAULT 0x00001008 [all …]
|
H A D | gc_10_1_0_default.h | 26 #define mmSDMA0_DEC_START_DEFAULT 0x00000000 27 #define mmSDMA0_PG_CNTL_DEFAULT 0x00000000 28 #define mmSDMA0_PG_CTX_LO_DEFAULT 0x00000000 29 #define mmSDMA0_PG_CTX_HI_DEFAULT 0x00000000 30 #define mmSDMA0_PG_CTX_CNTL_DEFAULT 0x00000000 31 #define mmSDMA0_POWER_CNTL_DEFAULT 0x40000050 32 #define mmSDMA0_CLK_CTRL_DEFAULT 0x00000100 33 #define mmSDMA0_CNTL_DEFAULT 0x000000c2 34 #define mmSDMA0_CHICKEN_BITS_DEFAULT 0x01af0107 35 #define mmSDMA0_GB_ADDR_CONFIG_DEFAULT 0x00000044 [all …]
|
/linux/arch/powerpc/boot/dts/fsl/ |
H A D | t1023si-post.dtsi | 39 alloc-ranges = <0 0 0x10000 0>; 44 alloc-ranges = <0 0 0x10000 0>; 49 alloc-ranges = <0 0 0x10000 0>; 56 interrupts = <25 2 0 0>; 64 bus-range = <0x0 0xff>; 65 interrupts = <20 2 0 0>; 67 pcie@0 { 68 reg = <0 0 0 0 0>; 73 interrupts = <20 2 0 0>; 74 interrupt-map-mask = <0xf800 0 0 7>; [all …]
|
H A D | t1040si-post.dtsi | 39 alloc-ranges = <0 0 0x10000 0>; 44 alloc-ranges = <0 0 0x10000 0>; 49 alloc-ranges = <0 0 0x10000 0>; 56 interrupts = <25 2 0 0>; 64 bus-range = <0x0 0xff>; 65 interrupts = <20 2 0 0>; 67 pcie@0 { 68 reg = <0 0 0 0 0>; 73 interrupts = <20 2 0 0>; 74 interrupt-map-mask = <0xf800 0 0 7>; [all …]
|
/linux/arch/arm64/boot/dts/freescale/ |
H A D | fsl-ls1012a.dtsi | 32 #size-cells = <0>; 34 cpu0: cpu@0 { 37 reg = <0x0>; 38 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 54 arm,psci-suspend-param = <0x0>; 63 #clock-cells = <0>; 70 #clock-cells = <0>; 92 reg = <0x0 0x1401000 0 0x1000>, /* GICD */ 93 <0x0 0x1402000 0 0x2000>, /* GICC */ 94 <0x0 0x1404000 0 0x2000>, /* GICH */ [all …]
|
H A D | fsl-ls1088a.dtsi | 27 #size-cells = <0>; 30 cpu0: cpu@0 { 33 reg = <0x0>; 34 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 42 reg = <0x1>; 43 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 51 reg = <0x2>; 52 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 60 reg = <0x3>; 61 clocks = <&clockgen QORIQ_CLK_CMUX 0>; [all …]
|
H A D | fsl-ls1043a.dtsi | 37 #size-cells = <0>; 45 cpu0: cpu@0 { 48 reg = <0x0>; 49 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 58 reg = <0x1>; 59 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 68 reg = <0x2>; 69 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 78 reg = <0x3>; 79 clocks = <&clockgen QORIQ_CLK_CMUX 0>; [all …]
|
H A D | fsl-ls1046a.dtsi | 38 #size-cells = <0>; 40 cpu0: cpu@0 { 43 reg = <0x0>; 44 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 53 reg = <0x1>; 54 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 63 reg = <0x2>; 64 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 73 reg = <0x3>; 74 clocks = <&clockgen QORIQ_CLK_CMUX 0>; [all …]
|
/linux/include/sound/ |
H A D | cs35l41.h | 16 #define CS35L41_FIRSTREG 0x00000000 17 #define CS35L41_LASTREG 0x03804FE8 18 #define CS35L41_DEVID 0x00000000 19 #define CS35L41_REVID 0x00000004 20 #define CS35L41_FABID 0x00000008 21 #define CS35L41_RELID 0x0000000C 22 #define CS35L41_OTPID 0x00000010 23 #define CS35L41_SFT_RESET 0x00000020 24 #define CS35L41_TEST_KEY_CTL 0x00000040 25 #define CS35L41_USER_KEY_CTL 0x00000044 [all …]
|
/linux/drivers/message/fusion/lsi/ |
H A D | mpi_log_sas.h | 16 #define SAS_LOGINFO_NEXUS_LOSS 0x31170000 17 #define SAS_LOGINFO_MASK 0xFFFF0000 20 /* IOC LOGINFO defines, 0x00000000 - 0x0FFFFFFF */ 23 /* Bits 27-24: IOC_LOGINFO_ORIGINATOR: 0=IOP, 1=PL, 2=IR */ 25 /* Bits 15-0: LOGINFO_CODE Specific */ 31 #define IOC_LOGINFO_ORIGINATOR_IOP (0x00000000) 32 #define IOC_LOGINFO_ORIGINATOR_PL (0x01000000) 33 #define IOC_LOGINFO_ORIGINATOR_IR (0x02000000) 35 #define IOC_LOGINFO_ORIGINATOR_MASK (0x0F000000) 40 #define IOC_LOGINFO_CODE_MASK (0x00FF0000) [all …]
|
/linux/drivers/video/fbdev/nvidia/ |
H A D | nv_setup.c | 62 VGA_WR08(par->PCIO, par->IOBase + 0x04, index); in NVWriteCrtc() 63 VGA_WR08(par->PCIO, par->IOBase + 0x05, value); in NVWriteCrtc() 67 VGA_WR08(par->PCIO, par->IOBase + 0x04, index); in NVReadCrtc() 68 return (VGA_RD08(par->PCIO, par->IOBase + 0x05)); in NVReadCrtc() 93 VGA_RD08(par->PCIO, par->IOBase + 0x0a); in NVWriteAttr() 95 index &= ~0x20; in NVWriteAttr() 97 index |= 0x20; in NVWriteAttr() 103 VGA_RD08(par->PCIO, par->IOBase + 0x0a); in NVReadAttr() 105 index &= ~0x20; in NVReadAttr() 107 index |= 0x20; in NVReadAttr() [all …]
|
/linux/tools/perf/pmu-events/arch/x86/ivybridge/ |
H A D | cache.json | 4 "Counter": "0,1,2,3", 5 "EventCode": "0x51", 9 "UMask": "0x1" 13 "Counter": "0,1,2,3", 15 "EventCode": "0x48", 19 "UMask": "0x2" 24 "EventCode": "0x48", 28 "UMask": "0x1" 34 "EventCode": "0x48", 37 "UMask": "0x1" [all …]
|
/linux/arch/arm/boot/dts/nxp/ls/ |
H A D | ls1021a.dtsi | 31 #size-cells = <0>; 36 reg = <0xf00>; 37 clocks = <&clockgen 1 0>; 44 reg = <0xf01>; 45 clocks = <&clockgen 1 0>; 50 memory@0 { 52 reg = <0x0 0x0 0x0 0x0>; 57 #clock-cells = <0>; 80 offset = <0xb0>; 81 mask = <0x02>; [all …]
|
/linux/tools/perf/pmu-events/arch/x86/jaketown/ |
H A D | cache.json | 4 "Counter": "0,1,2,3", 5 "EventCode": "0x51", 8 "UMask": "0x2" 12 "Counter": "0,1,2,3", 13 "EventCode": "0x51", 16 "UMask": "0x8" 20 "Counter": "0,1,2,3", 21 "EventCode": "0x51", 24 "UMask": "0x4" 28 "Counter": "0,1,2,3", [all …]
|