1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) 2 /* 3 * f_mass_storage.c -- Mass Storage USB Composite Function 4 * 5 * Copyright (C) 2003-2008 Alan Stern 6 * Copyright (C) 2009 Samsung Electronics 7 * Author: Michal Nazarewicz <mina86@mina86.com> 8 * All rights reserved. 9 */ 10 11 /* 12 * The Mass Storage Function acts as a USB Mass Storage device, 13 * appearing to the host as a disk drive or as a CD-ROM drive. In 14 * addition to providing an example of a genuinely useful composite 15 * function for a USB device, it also illustrates a technique of 16 * double-buffering for increased throughput. 17 * 18 * For more information about MSF and in particular its module 19 * parameters and sysfs interface read the 20 * <Documentation/usb/mass-storage.rst> file. 21 */ 22 23 /* 24 * MSF is configured by specifying a fsg_config structure. It has the 25 * following fields: 26 * 27 * nluns Number of LUNs function have (anywhere from 1 28 * to FSG_MAX_LUNS). 29 * luns An array of LUN configuration values. This 30 * should be filled for each LUN that 31 * function will include (ie. for "nluns" 32 * LUNs). Each element of the array has 33 * the following fields: 34 * ->filename The path to the backing file for the LUN. 35 * Required if LUN is not marked as 36 * removable. 37 * ->ro Flag specifying access to the LUN shall be 38 * read-only. This is implied if CD-ROM 39 * emulation is enabled as well as when 40 * it was impossible to open "filename" 41 * in R/W mode. 42 * ->removable Flag specifying that LUN shall be indicated as 43 * being removable. 44 * ->cdrom Flag specifying that LUN shall be reported as 45 * being a CD-ROM. 46 * ->nofua Flag specifying that FUA flag in SCSI WRITE(10,12) 47 * commands for this LUN shall be ignored. 48 * 49 * vendor_name 50 * product_name 51 * release Information used as a reply to INQUIRY 52 * request. To use default set to NULL, 53 * NULL, 0xffff respectively. The first 54 * field should be 8 and the second 16 55 * characters or less. 56 * 57 * can_stall Set to permit function to halt bulk endpoints. 58 * Disabled on some USB devices known not 59 * to work correctly. You should set it 60 * to true. 61 * 62 * If "removable" is not set for a LUN then a backing file must be 63 * specified. If it is set, then NULL filename means the LUN's medium 64 * is not loaded (an empty string as "filename" in the fsg_config 65 * structure causes error). The CD-ROM emulation includes a single 66 * data track and no audio tracks; hence there need be only one 67 * backing file per LUN. 68 * 69 * This function is heavily based on "File-backed Storage Gadget" by 70 * Alan Stern which in turn is heavily based on "Gadget Zero" by David 71 * Brownell. The driver's SCSI command interface was based on the 72 * "Information technology - Small Computer System Interface - 2" 73 * document from X3T9.2 Project 375D, Revision 10L, 7-SEP-93, 74 * available at <http://www.t10.org/ftp/t10/drafts/s2/s2-r10l.pdf>. 75 * The single exception is opcode 0x23 (READ FORMAT CAPACITIES), which 76 * was based on the "Universal Serial Bus Mass Storage Class UFI 77 * Command Specification" document, Revision 1.0, December 14, 1998, 78 * available at 79 * <http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf>. 80 */ 81 82 /* 83 * Driver Design 84 * 85 * The MSF is fairly straightforward. There is a main kernel 86 * thread that handles most of the work. Interrupt routines field 87 * callbacks from the controller driver: bulk- and interrupt-request 88 * completion notifications, endpoint-0 events, and disconnect events. 89 * Completion events are passed to the main thread by wakeup calls. Many 90 * ep0 requests are handled at interrupt time, but SetInterface, 91 * SetConfiguration, and device reset requests are forwarded to the 92 * thread in the form of "exceptions" using SIGUSR1 signals (since they 93 * should interrupt any ongoing file I/O operations). 94 * 95 * The thread's main routine implements the standard command/data/status 96 * parts of a SCSI interaction. It and its subroutines are full of tests 97 * for pending signals/exceptions -- all this polling is necessary since 98 * the kernel has no setjmp/longjmp equivalents. (Maybe this is an 99 * indication that the driver really wants to be running in userspace.) 100 * An important point is that so long as the thread is alive it keeps an 101 * open reference to the backing file. This will prevent unmounting 102 * the backing file's underlying filesystem and could cause problems 103 * during system shutdown, for example. To prevent such problems, the 104 * thread catches INT, TERM, and KILL signals and converts them into 105 * an EXIT exception. 106 * 107 * In normal operation the main thread is started during the gadget's 108 * fsg_bind() callback and stopped during fsg_unbind(). But it can 109 * also exit when it receives a signal, and there's no point leaving 110 * the gadget running when the thread is dead. As of this moment, MSF 111 * provides no way to deregister the gadget when thread dies -- maybe 112 * a callback functions is needed. 113 * 114 * To provide maximum throughput, the driver uses a circular pipeline of 115 * buffer heads (struct fsg_buffhd). In principle the pipeline can be 116 * arbitrarily long; in practice the benefits don't justify having more 117 * than 2 stages (i.e., double buffering). But it helps to think of the 118 * pipeline as being a long one. Each buffer head contains a bulk-in and 119 * a bulk-out request pointer (since the buffer can be used for both 120 * output and input -- directions always are given from the host's 121 * point of view) as well as a pointer to the buffer and various state 122 * variables. 123 * 124 * Use of the pipeline follows a simple protocol. There is a variable 125 * (fsg->next_buffhd_to_fill) that points to the next buffer head to use. 126 * At any time that buffer head may still be in use from an earlier 127 * request, so each buffer head has a state variable indicating whether 128 * it is EMPTY, FULL, or BUSY. Typical use involves waiting for the 129 * buffer head to be EMPTY, filling the buffer either by file I/O or by 130 * USB I/O (during which the buffer head is BUSY), and marking the buffer 131 * head FULL when the I/O is complete. Then the buffer will be emptied 132 * (again possibly by USB I/O, during which it is marked BUSY) and 133 * finally marked EMPTY again (possibly by a completion routine). 134 * 135 * A module parameter tells the driver to avoid stalling the bulk 136 * endpoints wherever the transport specification allows. This is 137 * necessary for some UDCs like the SuperH, which cannot reliably clear a 138 * halt on a bulk endpoint. However, under certain circumstances the 139 * Bulk-only specification requires a stall. In such cases the driver 140 * will halt the endpoint and set a flag indicating that it should clear 141 * the halt in software during the next device reset. Hopefully this 142 * will permit everything to work correctly. Furthermore, although the 143 * specification allows the bulk-out endpoint to halt when the host sends 144 * too much data, implementing this would cause an unavoidable race. 145 * The driver will always use the "no-stall" approach for OUT transfers. 146 * 147 * One subtle point concerns sending status-stage responses for ep0 148 * requests. Some of these requests, such as device reset, can involve 149 * interrupting an ongoing file I/O operation, which might take an 150 * arbitrarily long time. During that delay the host might give up on 151 * the original ep0 request and issue a new one. When that happens the 152 * driver should not notify the host about completion of the original 153 * request, as the host will no longer be waiting for it. So the driver 154 * assigns to each ep0 request a unique tag, and it keeps track of the 155 * tag value of the request associated with a long-running exception 156 * (device-reset, interface-change, or configuration-change). When the 157 * exception handler is finished, the status-stage response is submitted 158 * only if the current ep0 request tag is equal to the exception request 159 * tag. Thus only the most recently received ep0 request will get a 160 * status-stage response. 161 * 162 * Warning: This driver source file is too long. It ought to be split up 163 * into a header file plus about 3 separate .c files, to handle the details 164 * of the Gadget, USB Mass Storage, and SCSI protocols. 165 */ 166 167 168 /* #define VERBOSE_DEBUG */ 169 /* #define DUMP_MSGS */ 170 171 #include <linux/blkdev.h> 172 #include <linux/completion.h> 173 #include <linux/dcache.h> 174 #include <linux/delay.h> 175 #include <linux/device.h> 176 #include <linux/fcntl.h> 177 #include <linux/file.h> 178 #include <linux/fs.h> 179 #include <linux/kstrtox.h> 180 #include <linux/kthread.h> 181 #include <linux/sched/signal.h> 182 #include <linux/limits.h> 183 #include <linux/overflow.h> 184 #include <linux/pagemap.h> 185 #include <linux/rwsem.h> 186 #include <linux/slab.h> 187 #include <linux/spinlock.h> 188 #include <linux/string.h> 189 #include <linux/freezer.h> 190 #include <linux/module.h> 191 #include <linux/uaccess.h> 192 #include <linux/unaligned.h> 193 194 #include <linux/usb/ch9.h> 195 #include <linux/usb/gadget.h> 196 #include <linux/usb/composite.h> 197 198 #include <linux/nospec.h> 199 200 #include "configfs.h" 201 202 203 /*------------------------------------------------------------------------*/ 204 205 #define FSG_DRIVER_DESC "Mass Storage Function" 206 207 static const char fsg_string_interface[] = "Mass Storage"; 208 209 #include "storage_common.h" 210 #include "f_mass_storage.h" 211 212 /* Static strings, in UTF-8 (for simplicity we use only ASCII characters) */ 213 static struct usb_string fsg_strings[] = { 214 {FSG_STRING_INTERFACE, fsg_string_interface}, 215 {} 216 }; 217 218 static struct usb_gadget_strings fsg_stringtab = { 219 .language = 0x0409, /* en-us */ 220 .strings = fsg_strings, 221 }; 222 223 static struct usb_gadget_strings *fsg_strings_array[] = { 224 &fsg_stringtab, 225 NULL, 226 }; 227 228 /*-------------------------------------------------------------------------*/ 229 230 struct fsg_dev; 231 struct fsg_common; 232 233 /* Data shared by all the FSG instances. */ 234 struct fsg_common { 235 struct usb_gadget *gadget; 236 struct usb_composite_dev *cdev; 237 struct fsg_dev *fsg; 238 wait_queue_head_t io_wait; 239 wait_queue_head_t fsg_wait; 240 241 /* filesem protects: backing files in use */ 242 struct rw_semaphore filesem; 243 244 /* lock protects: state and thread_task */ 245 spinlock_t lock; 246 247 struct usb_ep *ep0; /* Copy of gadget->ep0 */ 248 struct usb_request *ep0req; /* Copy of cdev->req */ 249 unsigned int ep0_req_tag; 250 251 struct fsg_buffhd *next_buffhd_to_fill; 252 struct fsg_buffhd *next_buffhd_to_drain; 253 struct fsg_buffhd *buffhds; 254 unsigned int fsg_num_buffers; 255 256 int cmnd_size; 257 u8 cmnd[MAX_COMMAND_SIZE]; 258 259 unsigned int lun; 260 struct fsg_lun *luns[FSG_MAX_LUNS]; 261 struct fsg_lun *curlun; 262 263 unsigned int bulk_out_maxpacket; 264 enum fsg_state state; /* For exception handling */ 265 unsigned int exception_req_tag; 266 void *exception_arg; 267 268 enum data_direction data_dir; 269 u32 data_size; 270 u32 data_size_from_cmnd; 271 u32 tag; 272 u32 residue; 273 u32 usb_amount_left; 274 275 unsigned int can_stall:1; 276 unsigned int free_storage_on_release:1; 277 unsigned int phase_error:1; 278 unsigned int short_packet_received:1; 279 unsigned int bad_lun_okay:1; 280 unsigned int running:1; 281 unsigned int sysfs:1; 282 283 struct completion thread_notifier; 284 struct task_struct *thread_task; 285 286 /* Gadget's private data. */ 287 void *private_data; 288 289 char inquiry_string[INQUIRY_STRING_LEN]; 290 }; 291 292 struct fsg_dev { 293 struct usb_function function; 294 struct usb_gadget *gadget; /* Copy of cdev->gadget */ 295 struct fsg_common *common; 296 297 u16 interface_number; 298 299 unsigned int bulk_in_enabled:1; 300 unsigned int bulk_out_enabled:1; 301 302 unsigned long atomic_bitflags; 303 #define IGNORE_BULK_OUT 0 304 305 struct usb_ep *bulk_in; 306 struct usb_ep *bulk_out; 307 }; 308 309 static inline int __fsg_is_set(struct fsg_common *common, 310 const char *func, unsigned line) 311 { 312 if (common->fsg) 313 return 1; 314 ERROR(common, "common->fsg is NULL in %s at %u\n", func, line); 315 WARN_ON(1); 316 return 0; 317 } 318 319 #define fsg_is_set(common) likely(__fsg_is_set(common, __func__, __LINE__)) 320 321 static inline struct fsg_dev *fsg_from_func(struct usb_function *f) 322 { 323 return container_of(f, struct fsg_dev, function); 324 } 325 326 static int exception_in_progress(struct fsg_common *common) 327 { 328 return common->state > FSG_STATE_NORMAL; 329 } 330 331 /* Make bulk-out requests be divisible by the maxpacket size */ 332 static void set_bulk_out_req_length(struct fsg_common *common, 333 struct fsg_buffhd *bh, unsigned int length) 334 { 335 unsigned int rem; 336 337 bh->bulk_out_intended_length = length; 338 rem = length % common->bulk_out_maxpacket; 339 if (rem > 0) 340 length += common->bulk_out_maxpacket - rem; 341 bh->outreq->length = length; 342 } 343 344 345 /*-------------------------------------------------------------------------*/ 346 347 static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep) 348 { 349 const char *name; 350 351 if (ep == fsg->bulk_in) 352 name = "bulk-in"; 353 else if (ep == fsg->bulk_out) 354 name = "bulk-out"; 355 else 356 name = ep->name; 357 DBG(fsg, "%s set halt\n", name); 358 return usb_ep_set_halt(ep); 359 } 360 361 362 /*-------------------------------------------------------------------------*/ 363 364 /* These routines may be called in process context or in_irq */ 365 366 static void __raise_exception(struct fsg_common *common, enum fsg_state new_state, 367 void *arg) 368 { 369 unsigned long flags; 370 371 /* 372 * Do nothing if a higher-priority exception is already in progress. 373 * If a lower-or-equal priority exception is in progress, preempt it 374 * and notify the main thread by sending it a signal. 375 */ 376 spin_lock_irqsave(&common->lock, flags); 377 if (common->state <= new_state) { 378 common->exception_req_tag = common->ep0_req_tag; 379 common->state = new_state; 380 common->exception_arg = arg; 381 if (common->thread_task) 382 send_sig_info(SIGUSR1, SEND_SIG_PRIV, 383 common->thread_task); 384 } 385 spin_unlock_irqrestore(&common->lock, flags); 386 } 387 388 static void raise_exception(struct fsg_common *common, enum fsg_state new_state) 389 { 390 __raise_exception(common, new_state, NULL); 391 } 392 393 /*-------------------------------------------------------------------------*/ 394 395 static int ep0_queue(struct fsg_common *common) 396 { 397 int rc; 398 399 rc = usb_ep_queue(common->ep0, common->ep0req, GFP_ATOMIC); 400 common->ep0->driver_data = common; 401 if (rc != 0 && rc != -ESHUTDOWN) { 402 /* We can't do much more than wait for a reset */ 403 WARNING(common, "error in submission: %s --> %d\n", 404 common->ep0->name, rc); 405 } 406 return rc; 407 } 408 409 410 /*-------------------------------------------------------------------------*/ 411 412 /* Completion handlers. These always run in_irq. */ 413 414 static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req) 415 { 416 struct fsg_common *common = ep->driver_data; 417 struct fsg_buffhd *bh = req->context; 418 419 if (req->status || req->actual != req->length) 420 DBG(common, "%s --> %d, %u/%u\n", __func__, 421 req->status, req->actual, req->length); 422 if (req->status == -ECONNRESET) /* Request was cancelled */ 423 usb_ep_fifo_flush(ep); 424 425 /* Synchronize with the smp_load_acquire() in sleep_thread() */ 426 smp_store_release(&bh->state, BUF_STATE_EMPTY); 427 wake_up(&common->io_wait); 428 } 429 430 static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req) 431 { 432 struct fsg_common *common = ep->driver_data; 433 struct fsg_buffhd *bh = req->context; 434 435 dump_msg(common, "bulk-out", req->buf, req->actual); 436 if (req->status || req->actual != bh->bulk_out_intended_length) 437 DBG(common, "%s --> %d, %u/%u\n", __func__, 438 req->status, req->actual, bh->bulk_out_intended_length); 439 if (req->status == -ECONNRESET) /* Request was cancelled */ 440 usb_ep_fifo_flush(ep); 441 442 /* Synchronize with the smp_load_acquire() in sleep_thread() */ 443 smp_store_release(&bh->state, BUF_STATE_FULL); 444 wake_up(&common->io_wait); 445 } 446 447 static int _fsg_common_get_max_lun(struct fsg_common *common) 448 { 449 int i = ARRAY_SIZE(common->luns) - 1; 450 451 while (i >= 0 && !common->luns[i]) 452 --i; 453 454 return i; 455 } 456 457 static int fsg_setup(struct usb_function *f, 458 const struct usb_ctrlrequest *ctrl) 459 { 460 struct fsg_dev *fsg = fsg_from_func(f); 461 struct usb_request *req = fsg->common->ep0req; 462 u16 w_index = le16_to_cpu(ctrl->wIndex); 463 u16 w_value = le16_to_cpu(ctrl->wValue); 464 u16 w_length = le16_to_cpu(ctrl->wLength); 465 466 /* 467 * fsg_is_set() warns when common->fsg is NULL, but that can happen 468 * normally while a configuration change installs or removes the active 469 * function. 470 */ 471 if (!fsg->common->fsg) 472 return -EOPNOTSUPP; 473 474 ++fsg->common->ep0_req_tag; /* Record arrival of a new request */ 475 req->context = NULL; 476 req->length = 0; 477 dump_msg(fsg, "ep0-setup", (u8 *) ctrl, sizeof(*ctrl)); 478 479 switch (ctrl->bRequest) { 480 481 case US_BULK_RESET_REQUEST: 482 if (ctrl->bRequestType != 483 (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE)) 484 break; 485 if (w_index != fsg->interface_number || w_value != 0 || 486 w_length != 0) 487 return -EDOM; 488 489 /* 490 * Raise an exception to stop the current operation 491 * and reinitialize our state. 492 */ 493 DBG(fsg, "bulk reset request\n"); 494 raise_exception(fsg->common, FSG_STATE_PROTOCOL_RESET); 495 return USB_GADGET_DELAYED_STATUS; 496 497 case US_BULK_GET_MAX_LUN: 498 if (ctrl->bRequestType != 499 (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE)) 500 break; 501 if (w_index != fsg->interface_number || w_value != 0 || 502 w_length != 1) 503 return -EDOM; 504 VDBG(fsg, "get max LUN\n"); 505 *(u8 *)req->buf = _fsg_common_get_max_lun(fsg->common); 506 507 /* Respond with data/status */ 508 req->length = min_t(u16, 1, w_length); 509 return ep0_queue(fsg->common); 510 } 511 512 VDBG(fsg, 513 "unknown class-specific control req %02x.%02x v%04x i%04x l%u\n", 514 ctrl->bRequestType, ctrl->bRequest, 515 le16_to_cpu(ctrl->wValue), w_index, w_length); 516 return -EOPNOTSUPP; 517 } 518 519 520 /*-------------------------------------------------------------------------*/ 521 522 /* All the following routines run in process context */ 523 524 /* Use this for bulk or interrupt transfers, not ep0 */ 525 static int start_transfer(struct fsg_dev *fsg, struct usb_ep *ep, 526 struct usb_request *req) 527 { 528 int rc; 529 530 if (ep == fsg->bulk_in) 531 dump_msg(fsg, "bulk-in", req->buf, req->length); 532 533 rc = usb_ep_queue(ep, req, GFP_KERNEL); 534 if (rc) { 535 536 /* We can't do much more than wait for a reset */ 537 req->status = rc; 538 539 /* 540 * Note: currently the net2280 driver fails zero-length 541 * submissions if DMA is enabled. 542 */ 543 if (rc != -ESHUTDOWN && 544 !(rc == -EOPNOTSUPP && req->length == 0)) 545 WARNING(fsg, "error in submission: %s --> %d\n", 546 ep->name, rc); 547 } 548 return rc; 549 } 550 551 static bool start_in_transfer(struct fsg_common *common, struct fsg_buffhd *bh) 552 { 553 int rc; 554 555 if (!fsg_is_set(common)) 556 return false; 557 bh->state = BUF_STATE_SENDING; 558 rc = start_transfer(common->fsg, common->fsg->bulk_in, bh->inreq); 559 if (rc) { 560 bh->state = BUF_STATE_EMPTY; 561 if (rc == -ESHUTDOWN) { 562 common->running = 0; 563 return false; 564 } 565 } 566 return true; 567 } 568 569 static bool start_out_transfer(struct fsg_common *common, struct fsg_buffhd *bh) 570 { 571 int rc; 572 573 if (!fsg_is_set(common)) 574 return false; 575 bh->state = BUF_STATE_RECEIVING; 576 rc = start_transfer(common->fsg, common->fsg->bulk_out, bh->outreq); 577 if (rc) { 578 bh->state = BUF_STATE_FULL; 579 if (rc == -ESHUTDOWN) { 580 common->running = 0; 581 return false; 582 } 583 } 584 return true; 585 } 586 587 static int sleep_thread(struct fsg_common *common, bool can_freeze, 588 struct fsg_buffhd *bh) 589 { 590 int rc; 591 592 /* Wait until a signal arrives or bh is no longer busy */ 593 if (can_freeze) 594 /* 595 * synchronize with the smp_store_release(&bh->state) in 596 * bulk_in_complete() or bulk_out_complete() 597 */ 598 rc = wait_event_freezable(common->io_wait, 599 bh && smp_load_acquire(&bh->state) >= 600 BUF_STATE_EMPTY); 601 else 602 rc = wait_event_interruptible(common->io_wait, 603 bh && smp_load_acquire(&bh->state) >= 604 BUF_STATE_EMPTY); 605 return rc ? -EINTR : 0; 606 } 607 608 609 /*-------------------------------------------------------------------------*/ 610 611 static int do_read(struct fsg_common *common) 612 { 613 struct fsg_lun *curlun = common->curlun; 614 u64 lba; 615 struct fsg_buffhd *bh; 616 int rc; 617 u32 amount_left; 618 loff_t file_offset, file_offset_tmp; 619 unsigned int amount; 620 ssize_t nread; 621 622 /* 623 * Get the starting Logical Block Address and check that it's 624 * not too big. 625 */ 626 if (common->cmnd[0] == READ_6) 627 lba = get_unaligned_be24(&common->cmnd[1]); 628 else { 629 if (common->cmnd[0] == READ_16) 630 lba = get_unaligned_be64(&common->cmnd[2]); 631 else /* READ_10 or READ_12 */ 632 lba = get_unaligned_be32(&common->cmnd[2]); 633 634 /* 635 * We allow DPO (Disable Page Out = don't save data in the 636 * cache) and FUA (Force Unit Access = don't read from the 637 * cache), but we don't implement them. 638 */ 639 if ((common->cmnd[1] & ~0x18) != 0) { 640 curlun->sense_data = SS_INVALID_FIELD_IN_CDB; 641 return -EINVAL; 642 } 643 } 644 if (lba >= curlun->num_sectors) { 645 curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; 646 return -EINVAL; 647 } 648 file_offset = ((loff_t) lba) << curlun->blkbits; 649 650 /* Carry out the file reads */ 651 amount_left = common->data_size_from_cmnd; 652 if (unlikely(amount_left == 0)) 653 return -EIO; /* No default reply */ 654 655 for (;;) { 656 /* 657 * Figure out how much we need to read: 658 * Try to read the remaining amount. 659 * But don't read more than the buffer size. 660 * And don't try to read past the end of the file. 661 */ 662 amount = min(amount_left, FSG_BUFLEN); 663 amount = min_t(loff_t, amount, 664 curlun->file_length - file_offset); 665 666 /* Wait for the next buffer to become available */ 667 bh = common->next_buffhd_to_fill; 668 rc = sleep_thread(common, false, bh); 669 if (rc) 670 return rc; 671 672 /* 673 * If we were asked to read past the end of file, 674 * end with an empty buffer. 675 */ 676 if (amount == 0) { 677 curlun->sense_data = 678 SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; 679 curlun->sense_data_info = 680 file_offset >> curlun->blkbits; 681 curlun->info_valid = 1; 682 bh->inreq->length = 0; 683 bh->state = BUF_STATE_FULL; 684 break; 685 } 686 687 /* Perform the read */ 688 file_offset_tmp = file_offset; 689 nread = kernel_read(curlun->filp, bh->buf, amount, 690 &file_offset_tmp); 691 VLDBG(curlun, "file read %u @ %llu -> %d\n", amount, 692 (unsigned long long)file_offset, (int)nread); 693 if (signal_pending(current)) 694 return -EINTR; 695 696 if (nread < 0) { 697 LDBG(curlun, "error in file read: %d\n", (int)nread); 698 nread = 0; 699 } else if (nread < amount) { 700 LDBG(curlun, "partial file read: %d/%u\n", 701 (int)nread, amount); 702 nread = round_down(nread, curlun->blksize); 703 } 704 file_offset += nread; 705 amount_left -= nread; 706 common->residue -= nread; 707 708 /* 709 * Except at the end of the transfer, nread will be 710 * equal to the buffer size, which is divisible by the 711 * bulk-in maxpacket size. 712 */ 713 bh->inreq->length = nread; 714 bh->state = BUF_STATE_FULL; 715 716 /* If an error occurred, report it and its position */ 717 if (nread < amount) { 718 curlun->sense_data = SS_UNRECOVERED_READ_ERROR; 719 curlun->sense_data_info = 720 file_offset >> curlun->blkbits; 721 curlun->info_valid = 1; 722 break; 723 } 724 725 if (amount_left == 0) 726 break; /* No more left to read */ 727 728 /* Send this buffer and go read some more */ 729 bh->inreq->zero = 0; 730 if (!start_in_transfer(common, bh)) 731 /* Don't know what to do if common->fsg is NULL */ 732 return -EIO; 733 common->next_buffhd_to_fill = bh->next; 734 } 735 736 return -EIO; /* No default reply */ 737 } 738 739 740 /*-------------------------------------------------------------------------*/ 741 742 static int do_write(struct fsg_common *common) 743 { 744 struct fsg_lun *curlun = common->curlun; 745 u64 lba; 746 struct fsg_buffhd *bh; 747 int get_some_more; 748 u32 amount_left_to_req, amount_left_to_write; 749 loff_t usb_offset, file_offset, file_offset_tmp; 750 unsigned int amount; 751 ssize_t nwritten; 752 int rc; 753 754 if (curlun->ro) { 755 curlun->sense_data = SS_WRITE_PROTECTED; 756 return -EINVAL; 757 } 758 spin_lock(&curlun->filp->f_lock); 759 curlun->filp->f_flags &= ~O_SYNC; /* Default is not to wait */ 760 spin_unlock(&curlun->filp->f_lock); 761 762 /* 763 * Get the starting Logical Block Address and check that it's 764 * not too big 765 */ 766 if (common->cmnd[0] == WRITE_6) 767 lba = get_unaligned_be24(&common->cmnd[1]); 768 else { 769 if (common->cmnd[0] == WRITE_16) 770 lba = get_unaligned_be64(&common->cmnd[2]); 771 else /* WRITE_10 or WRITE_12 */ 772 lba = get_unaligned_be32(&common->cmnd[2]); 773 774 /* 775 * We allow DPO (Disable Page Out = don't save data in the 776 * cache) and FUA (Force Unit Access = write directly to the 777 * medium). We don't implement DPO; we implement FUA by 778 * performing synchronous output. 779 */ 780 if (common->cmnd[1] & ~0x18) { 781 curlun->sense_data = SS_INVALID_FIELD_IN_CDB; 782 return -EINVAL; 783 } 784 if (!curlun->nofua && (common->cmnd[1] & 0x08)) { /* FUA */ 785 spin_lock(&curlun->filp->f_lock); 786 curlun->filp->f_flags |= O_SYNC; 787 spin_unlock(&curlun->filp->f_lock); 788 } 789 } 790 if (lba >= curlun->num_sectors) { 791 curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; 792 return -EINVAL; 793 } 794 795 /* Carry out the file writes */ 796 get_some_more = 1; 797 file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits; 798 amount_left_to_req = common->data_size_from_cmnd; 799 amount_left_to_write = common->data_size_from_cmnd; 800 801 while (amount_left_to_write > 0) { 802 803 /* Queue a request for more data from the host */ 804 bh = common->next_buffhd_to_fill; 805 if (bh->state == BUF_STATE_EMPTY && get_some_more) { 806 807 /* 808 * Figure out how much we want to get: 809 * Try to get the remaining amount, 810 * but not more than the buffer size. 811 */ 812 amount = min(amount_left_to_req, FSG_BUFLEN); 813 814 /* Beyond the end of the backing file? */ 815 if (usb_offset >= curlun->file_length) { 816 get_some_more = 0; 817 curlun->sense_data = 818 SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; 819 curlun->sense_data_info = 820 usb_offset >> curlun->blkbits; 821 curlun->info_valid = 1; 822 continue; 823 } 824 825 /* Get the next buffer */ 826 usb_offset += amount; 827 common->usb_amount_left -= amount; 828 amount_left_to_req -= amount; 829 if (amount_left_to_req == 0) 830 get_some_more = 0; 831 832 /* 833 * Except at the end of the transfer, amount will be 834 * equal to the buffer size, which is divisible by 835 * the bulk-out maxpacket size. 836 */ 837 set_bulk_out_req_length(common, bh, amount); 838 if (!start_out_transfer(common, bh)) 839 /* Dunno what to do if common->fsg is NULL */ 840 return -EIO; 841 common->next_buffhd_to_fill = bh->next; 842 continue; 843 } 844 845 /* Write the received data to the backing file */ 846 bh = common->next_buffhd_to_drain; 847 if (bh->state == BUF_STATE_EMPTY && !get_some_more) 848 break; /* We stopped early */ 849 850 /* Wait for the data to be received */ 851 rc = sleep_thread(common, false, bh); 852 if (rc) 853 return rc; 854 855 common->next_buffhd_to_drain = bh->next; 856 bh->state = BUF_STATE_EMPTY; 857 858 /* Did something go wrong with the transfer? */ 859 if (bh->outreq->status != 0) { 860 curlun->sense_data = SS_COMMUNICATION_FAILURE; 861 curlun->sense_data_info = 862 file_offset >> curlun->blkbits; 863 curlun->info_valid = 1; 864 break; 865 } 866 867 amount = bh->outreq->actual; 868 if (curlun->file_length - file_offset < amount) { 869 LERROR(curlun, "write %u @ %llu beyond end %llu\n", 870 amount, (unsigned long long)file_offset, 871 (unsigned long long)curlun->file_length); 872 amount = curlun->file_length - file_offset; 873 } 874 875 /* 876 * Don't accept excess data. The spec doesn't say 877 * what to do in this case. We'll ignore the error. 878 */ 879 amount = min(amount, bh->bulk_out_intended_length); 880 881 /* Don't write a partial block */ 882 amount = round_down(amount, curlun->blksize); 883 if (amount == 0) 884 goto empty_write; 885 886 /* Perform the write */ 887 file_offset_tmp = file_offset; 888 nwritten = kernel_write(curlun->filp, bh->buf, amount, 889 &file_offset_tmp); 890 VLDBG(curlun, "file write %u @ %llu -> %d\n", amount, 891 (unsigned long long)file_offset, (int)nwritten); 892 if (signal_pending(current)) 893 return -EINTR; /* Interrupted! */ 894 895 if (nwritten < 0) { 896 LDBG(curlun, "error in file write: %d\n", 897 (int) nwritten); 898 nwritten = 0; 899 } else if (nwritten < amount) { 900 LDBG(curlun, "partial file write: %d/%u\n", 901 (int) nwritten, amount); 902 nwritten = round_down(nwritten, curlun->blksize); 903 } 904 file_offset += nwritten; 905 amount_left_to_write -= nwritten; 906 common->residue -= nwritten; 907 908 /* If an error occurred, report it and its position */ 909 if (nwritten < amount) { 910 curlun->sense_data = SS_WRITE_ERROR; 911 curlun->sense_data_info = 912 file_offset >> curlun->blkbits; 913 curlun->info_valid = 1; 914 break; 915 } 916 917 empty_write: 918 /* Did the host decide to stop early? */ 919 if (bh->outreq->actual < bh->bulk_out_intended_length) { 920 common->short_packet_received = 1; 921 break; 922 } 923 } 924 925 return -EIO; /* No default reply */ 926 } 927 928 929 /*-------------------------------------------------------------------------*/ 930 931 static int do_synchronize_cache(struct fsg_common *common) 932 { 933 struct fsg_lun *curlun = common->curlun; 934 int rc; 935 936 /* We ignore the requested LBA and write out all file's 937 * dirty data buffers. */ 938 rc = fsg_lun_fsync_sub(curlun); 939 if (rc) 940 curlun->sense_data = SS_WRITE_ERROR; 941 return 0; 942 } 943 944 945 /*-------------------------------------------------------------------------*/ 946 947 static void invalidate_sub(struct fsg_lun *curlun) 948 { 949 struct file *filp = curlun->filp; 950 struct inode *inode = file_inode(filp); 951 unsigned long __maybe_unused rc; 952 953 rc = invalidate_mapping_pages(inode->i_mapping, 0, -1); 954 VLDBG(curlun, "invalidate_mapping_pages -> %ld\n", rc); 955 } 956 957 static int do_verify(struct fsg_common *common) 958 { 959 struct fsg_lun *curlun = common->curlun; 960 u32 lba; 961 u32 verification_length; 962 struct fsg_buffhd *bh = common->next_buffhd_to_fill; 963 loff_t file_offset, file_offset_tmp; 964 u32 amount_left; 965 unsigned int amount; 966 ssize_t nread; 967 968 /* 969 * Get the starting Logical Block Address and check that it's 970 * not too big. 971 */ 972 lba = get_unaligned_be32(&common->cmnd[2]); 973 if (lba >= curlun->num_sectors) { 974 curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; 975 return -EINVAL; 976 } 977 978 /* 979 * We allow DPO (Disable Page Out = don't save data in the 980 * cache) but we don't implement it. 981 */ 982 if (common->cmnd[1] & ~0x10) { 983 curlun->sense_data = SS_INVALID_FIELD_IN_CDB; 984 return -EINVAL; 985 } 986 987 verification_length = get_unaligned_be16(&common->cmnd[7]); 988 if (unlikely(verification_length == 0)) 989 return -EIO; /* No default reply */ 990 991 /* Prepare to carry out the file verify */ 992 amount_left = verification_length << curlun->blkbits; 993 file_offset = ((loff_t) lba) << curlun->blkbits; 994 995 /* Write out all the dirty buffers before invalidating them */ 996 fsg_lun_fsync_sub(curlun); 997 if (signal_pending(current)) 998 return -EINTR; 999 1000 invalidate_sub(curlun); 1001 if (signal_pending(current)) 1002 return -EINTR; 1003 1004 /* Just try to read the requested blocks */ 1005 while (amount_left > 0) { 1006 /* 1007 * Figure out how much we need to read: 1008 * Try to read the remaining amount, but not more than 1009 * the buffer size. 1010 * And don't try to read past the end of the file. 1011 */ 1012 amount = min(amount_left, FSG_BUFLEN); 1013 amount = min_t(loff_t, amount, 1014 curlun->file_length - file_offset); 1015 if (amount == 0) { 1016 curlun->sense_data = 1017 SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; 1018 curlun->sense_data_info = 1019 file_offset >> curlun->blkbits; 1020 curlun->info_valid = 1; 1021 break; 1022 } 1023 1024 /* Perform the read */ 1025 file_offset_tmp = file_offset; 1026 nread = kernel_read(curlun->filp, bh->buf, amount, 1027 &file_offset_tmp); 1028 VLDBG(curlun, "file read %u @ %llu -> %d\n", amount, 1029 (unsigned long long) file_offset, 1030 (int) nread); 1031 if (signal_pending(current)) 1032 return -EINTR; 1033 1034 if (nread < 0) { 1035 LDBG(curlun, "error in file verify: %d\n", (int)nread); 1036 nread = 0; 1037 } else if (nread < amount) { 1038 LDBG(curlun, "partial file verify: %d/%u\n", 1039 (int)nread, amount); 1040 nread = round_down(nread, curlun->blksize); 1041 } 1042 if (nread == 0) { 1043 curlun->sense_data = SS_UNRECOVERED_READ_ERROR; 1044 curlun->sense_data_info = 1045 file_offset >> curlun->blkbits; 1046 curlun->info_valid = 1; 1047 break; 1048 } 1049 file_offset += nread; 1050 amount_left -= nread; 1051 } 1052 return 0; 1053 } 1054 1055 1056 /*-------------------------------------------------------------------------*/ 1057 1058 static int do_inquiry(struct fsg_common *common, struct fsg_buffhd *bh) 1059 { 1060 struct fsg_lun *curlun = common->curlun; 1061 u8 *buf = (u8 *) bh->buf; 1062 1063 if (!curlun) { /* Unsupported LUNs are okay */ 1064 common->bad_lun_okay = 1; 1065 memset(buf, 0, 36); 1066 buf[0] = TYPE_NO_LUN; /* Unsupported, no device-type */ 1067 buf[4] = 31; /* Additional length */ 1068 return 36; 1069 } 1070 1071 buf[0] = curlun->cdrom ? TYPE_ROM : TYPE_DISK; 1072 buf[1] = curlun->removable ? 0x80 : 0; 1073 buf[2] = 2; /* ANSI SCSI level 2 */ 1074 buf[3] = 2; /* SCSI-2 INQUIRY data format */ 1075 buf[4] = 31; /* Additional length */ 1076 buf[5] = 0; /* No special options */ 1077 buf[6] = 0; 1078 buf[7] = 0; 1079 if (curlun->inquiry_string[0]) 1080 memcpy(buf + 8, curlun->inquiry_string, 1081 sizeof(curlun->inquiry_string)); 1082 else 1083 memcpy(buf + 8, common->inquiry_string, 1084 sizeof(common->inquiry_string)); 1085 return 36; 1086 } 1087 1088 static int do_request_sense(struct fsg_common *common, struct fsg_buffhd *bh) 1089 { 1090 struct fsg_lun *curlun = common->curlun; 1091 u8 *buf = (u8 *) bh->buf; 1092 u32 sd, sdinfo; 1093 int valid; 1094 1095 /* 1096 * From the SCSI-2 spec., section 7.9 (Unit attention condition): 1097 * 1098 * If a REQUEST SENSE command is received from an initiator 1099 * with a pending unit attention condition (before the target 1100 * generates the contingent allegiance condition), then the 1101 * target shall either: 1102 * a) report any pending sense data and preserve the unit 1103 * attention condition on the logical unit, or, 1104 * b) report the unit attention condition, may discard any 1105 * pending sense data, and clear the unit attention 1106 * condition on the logical unit for that initiator. 1107 * 1108 * FSG normally uses option a); enable this code to use option b). 1109 */ 1110 #if 0 1111 if (curlun && curlun->unit_attention_data != NO_SENSE) { 1112 curlun->sense_data = curlun->unit_attention_data; 1113 curlun->unit_attention_data = NO_SENSE; 1114 } 1115 #endif 1116 1117 if (!curlun) { /* Unsupported LUNs are okay */ 1118 common->bad_lun_okay = 1; 1119 sd = SS_LOGICAL_UNIT_NOT_SUPPORTED; 1120 sdinfo = 0; 1121 valid = 0; 1122 } else { 1123 sd = curlun->sense_data; 1124 sdinfo = curlun->sense_data_info; 1125 valid = curlun->info_valid << 7; 1126 curlun->sense_data = NO_SENSE; 1127 curlun->sense_data_info = 0; 1128 curlun->info_valid = 0; 1129 } 1130 1131 memset(buf, 0, 18); 1132 buf[0] = valid | 0x70; /* Valid, current error */ 1133 buf[2] = usb_sense_key(sd); 1134 put_unaligned_be32(sdinfo, &buf[3]); /* Sense information */ 1135 buf[7] = 18 - 8; /* Additional sense length */ 1136 buf[12] = usb_sense_asc(sd); 1137 buf[13] = usb_sense_ascq(sd); 1138 return 18; 1139 } 1140 1141 static int do_read_capacity(struct fsg_common *common, struct fsg_buffhd *bh) 1142 { 1143 struct fsg_lun *curlun = common->curlun; 1144 u32 lba = get_unaligned_be32(&common->cmnd[2]); 1145 int pmi = common->cmnd[8]; 1146 u8 *buf = (u8 *)bh->buf; 1147 u32 max_lba; 1148 1149 /* Check the PMI and LBA fields */ 1150 if (pmi > 1 || (pmi == 0 && lba != 0)) { 1151 curlun->sense_data = SS_INVALID_FIELD_IN_CDB; 1152 return -EINVAL; 1153 } 1154 1155 if (curlun->num_sectors < 0x100000000ULL) 1156 max_lba = curlun->num_sectors - 1; 1157 else 1158 max_lba = 0xffffffff; 1159 put_unaligned_be32(max_lba, &buf[0]); /* Max logical block */ 1160 put_unaligned_be32(curlun->blksize, &buf[4]); /* Block length */ 1161 return 8; 1162 } 1163 1164 static int do_read_capacity_16(struct fsg_common *common, struct fsg_buffhd *bh) 1165 { 1166 struct fsg_lun *curlun = common->curlun; 1167 u64 lba = get_unaligned_be64(&common->cmnd[2]); 1168 int pmi = common->cmnd[14]; 1169 u8 *buf = (u8 *)bh->buf; 1170 1171 /* Check the PMI and LBA fields */ 1172 if (pmi > 1 || (pmi == 0 && lba != 0)) { 1173 curlun->sense_data = SS_INVALID_FIELD_IN_CDB; 1174 return -EINVAL; 1175 } 1176 1177 put_unaligned_be64(curlun->num_sectors - 1, &buf[0]); 1178 /* Max logical block */ 1179 put_unaligned_be32(curlun->blksize, &buf[8]); /* Block length */ 1180 1181 /* It is safe to keep other fields zeroed */ 1182 memset(&buf[12], 0, 32 - 12); 1183 return 32; 1184 } 1185 1186 static int do_read_header(struct fsg_common *common, struct fsg_buffhd *bh) 1187 { 1188 struct fsg_lun *curlun = common->curlun; 1189 int msf = common->cmnd[1] & 0x02; 1190 u32 lba = get_unaligned_be32(&common->cmnd[2]); 1191 u8 *buf = (u8 *)bh->buf; 1192 1193 if (common->cmnd[1] & ~0x02) { /* Mask away MSF */ 1194 curlun->sense_data = SS_INVALID_FIELD_IN_CDB; 1195 return -EINVAL; 1196 } 1197 if (lba >= curlun->num_sectors) { 1198 curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; 1199 return -EINVAL; 1200 } 1201 1202 memset(buf, 0, 8); 1203 buf[0] = 0x01; /* 2048 bytes of user data, rest is EC */ 1204 store_cdrom_address(&buf[4], msf, lba); 1205 return 8; 1206 } 1207 1208 static int do_read_toc(struct fsg_common *common, struct fsg_buffhd *bh) 1209 { 1210 struct fsg_lun *curlun = common->curlun; 1211 int msf = common->cmnd[1] & 0x02; 1212 int start_track = common->cmnd[6]; 1213 u8 *buf = (u8 *)bh->buf; 1214 u8 format; 1215 int i, len; 1216 1217 format = common->cmnd[2] & 0xf; 1218 1219 if ((common->cmnd[1] & ~0x02) != 0 || /* Mask away MSF */ 1220 (start_track > 1 && format != 0x1)) { 1221 curlun->sense_data = SS_INVALID_FIELD_IN_CDB; 1222 return -EINVAL; 1223 } 1224 1225 /* 1226 * Check if CDB is old style SFF-8020i 1227 * i.e. format is in 2 MSBs of byte 9 1228 * Mac OS-X host sends us this. 1229 */ 1230 if (format == 0) 1231 format = (common->cmnd[9] >> 6) & 0x3; 1232 1233 switch (format) { 1234 case 0: /* Formatted TOC */ 1235 case 1: /* Multi-session info */ 1236 len = 4 + 2*8; /* 4 byte header + 2 descriptors */ 1237 memset(buf, 0, len); 1238 buf[1] = len - 2; /* TOC Length excludes length field */ 1239 buf[2] = 1; /* First track number */ 1240 buf[3] = 1; /* Last track number */ 1241 buf[5] = 0x16; /* Data track, copying allowed */ 1242 buf[6] = 0x01; /* Only track is number 1 */ 1243 store_cdrom_address(&buf[8], msf, 0); 1244 1245 buf[13] = 0x16; /* Lead-out track is data */ 1246 buf[14] = 0xAA; /* Lead-out track number */ 1247 store_cdrom_address(&buf[16], msf, curlun->num_sectors); 1248 return len; 1249 1250 case 2: 1251 /* Raw TOC */ 1252 len = 4 + 3*11; /* 4 byte header + 3 descriptors */ 1253 memset(buf, 0, len); /* Header + A0, A1 & A2 descriptors */ 1254 buf[1] = len - 2; /* TOC Length excludes length field */ 1255 buf[2] = 1; /* First complete session */ 1256 buf[3] = 1; /* Last complete session */ 1257 1258 buf += 4; 1259 /* fill in A0, A1 and A2 points */ 1260 for (i = 0; i < 3; i++) { 1261 buf[0] = 1; /* Session number */ 1262 buf[1] = 0x16; /* Data track, copying allowed */ 1263 /* 2 - Track number 0 -> TOC */ 1264 buf[3] = 0xA0 + i; /* A0, A1, A2 point */ 1265 /* 4, 5, 6 - Min, sec, frame is zero */ 1266 buf[8] = 1; /* Pmin: last track number */ 1267 buf += 11; /* go to next track descriptor */ 1268 } 1269 buf -= 11; /* go back to A2 descriptor */ 1270 1271 /* For A2, 7, 8, 9, 10 - zero, Pmin, Psec, Pframe of Lead out */ 1272 store_cdrom_address(&buf[7], msf, curlun->num_sectors); 1273 return len; 1274 1275 default: 1276 /* PMA, ATIP, CD-TEXT not supported/required */ 1277 curlun->sense_data = SS_INVALID_FIELD_IN_CDB; 1278 return -EINVAL; 1279 } 1280 } 1281 1282 static int do_mode_sense(struct fsg_common *common, struct fsg_buffhd *bh) 1283 { 1284 struct fsg_lun *curlun = common->curlun; 1285 int mscmnd = common->cmnd[0]; 1286 u8 *buf = (u8 *) bh->buf; 1287 u8 *buf0 = buf; 1288 int pc, page_code; 1289 int changeable_values, all_pages; 1290 int valid_page = 0; 1291 int len, limit; 1292 1293 if ((common->cmnd[1] & ~0x08) != 0) { /* Mask away DBD */ 1294 curlun->sense_data = SS_INVALID_FIELD_IN_CDB; 1295 return -EINVAL; 1296 } 1297 pc = common->cmnd[2] >> 6; 1298 page_code = common->cmnd[2] & 0x3f; 1299 if (pc == 3) { 1300 curlun->sense_data = SS_SAVING_PARAMETERS_NOT_SUPPORTED; 1301 return -EINVAL; 1302 } 1303 changeable_values = (pc == 1); 1304 all_pages = (page_code == 0x3f); 1305 1306 /* 1307 * Write the mode parameter header. Fixed values are: default 1308 * medium type, no cache control (DPOFUA), and no block descriptors. 1309 * The only variable value is the WriteProtect bit. We will fill in 1310 * the mode data length later. 1311 */ 1312 memset(buf, 0, 8); 1313 if (mscmnd == MODE_SENSE) { 1314 buf[2] = (curlun->ro ? 0x80 : 0x00); /* WP, DPOFUA */ 1315 buf += 4; 1316 limit = 255; 1317 } else { /* MODE_SENSE_10 */ 1318 buf[3] = (curlun->ro ? 0x80 : 0x00); /* WP, DPOFUA */ 1319 buf += 8; 1320 limit = 65535; /* Should really be FSG_BUFLEN */ 1321 } 1322 1323 /* No block descriptors */ 1324 1325 /* 1326 * The mode pages, in numerical order. The only page we support 1327 * is the Caching page. 1328 */ 1329 if (page_code == 0x08 || all_pages) { 1330 valid_page = 1; 1331 buf[0] = 0x08; /* Page code */ 1332 buf[1] = 10; /* Page length */ 1333 memset(buf+2, 0, 10); /* None of the fields are changeable */ 1334 1335 if (!changeable_values) { 1336 buf[2] = 0x04; /* Write cache enable, */ 1337 /* Read cache not disabled */ 1338 /* No cache retention priorities */ 1339 put_unaligned_be16(0xffff, &buf[4]); 1340 /* Don't disable prefetch */ 1341 /* Minimum prefetch = 0 */ 1342 put_unaligned_be16(0xffff, &buf[8]); 1343 /* Maximum prefetch */ 1344 put_unaligned_be16(0xffff, &buf[10]); 1345 /* Maximum prefetch ceiling */ 1346 } 1347 buf += 12; 1348 } 1349 1350 /* 1351 * Check that a valid page was requested and the mode data length 1352 * isn't too long. 1353 */ 1354 len = buf - buf0; 1355 if (!valid_page || len > limit) { 1356 curlun->sense_data = SS_INVALID_FIELD_IN_CDB; 1357 return -EINVAL; 1358 } 1359 1360 /* Store the mode data length */ 1361 if (mscmnd == MODE_SENSE) 1362 buf0[0] = len - 1; 1363 else 1364 put_unaligned_be16(len - 2, buf0); 1365 return len; 1366 } 1367 1368 static int do_start_stop(struct fsg_common *common) 1369 { 1370 struct fsg_lun *curlun = common->curlun; 1371 int loej, start; 1372 1373 if (!curlun) { 1374 return -EINVAL; 1375 } else if (!curlun->removable) { 1376 curlun->sense_data = SS_INVALID_COMMAND; 1377 return -EINVAL; 1378 } else if ((common->cmnd[1] & ~0x01) != 0 || /* Mask away Immed */ 1379 (common->cmnd[4] & ~0x03) != 0) { /* Mask LoEj, Start */ 1380 curlun->sense_data = SS_INVALID_FIELD_IN_CDB; 1381 return -EINVAL; 1382 } 1383 1384 loej = common->cmnd[4] & 0x02; 1385 start = common->cmnd[4] & 0x01; 1386 1387 /* 1388 * Our emulation doesn't support mounting; the medium is 1389 * available for use as soon as it is loaded. 1390 */ 1391 if (start) { 1392 if (!fsg_lun_is_open(curlun)) { 1393 curlun->sense_data = SS_MEDIUM_NOT_PRESENT; 1394 return -EINVAL; 1395 } 1396 return 0; 1397 } 1398 1399 /* Are we allowed to unload the media? */ 1400 if (curlun->prevent_medium_removal) { 1401 LDBG(curlun, "unload attempt prevented\n"); 1402 curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED; 1403 return -EINVAL; 1404 } 1405 1406 if (!loej) 1407 return 0; 1408 1409 up_read(&common->filesem); 1410 down_write(&common->filesem); 1411 fsg_lun_close(curlun); 1412 up_write(&common->filesem); 1413 down_read(&common->filesem); 1414 1415 return 0; 1416 } 1417 1418 static int do_prevent_allow(struct fsg_common *common) 1419 { 1420 struct fsg_lun *curlun = common->curlun; 1421 int prevent; 1422 1423 if (!common->curlun) { 1424 return -EINVAL; 1425 } else if (!common->curlun->removable) { 1426 common->curlun->sense_data = SS_INVALID_COMMAND; 1427 return -EINVAL; 1428 } 1429 1430 prevent = common->cmnd[4] & 0x01; 1431 if ((common->cmnd[4] & ~0x01) != 0) { /* Mask away Prevent */ 1432 curlun->sense_data = SS_INVALID_FIELD_IN_CDB; 1433 return -EINVAL; 1434 } 1435 1436 if (curlun->prevent_medium_removal && !prevent) 1437 fsg_lun_fsync_sub(curlun); 1438 curlun->prevent_medium_removal = prevent; 1439 return 0; 1440 } 1441 1442 static int do_read_format_capacities(struct fsg_common *common, 1443 struct fsg_buffhd *bh) 1444 { 1445 struct fsg_lun *curlun = common->curlun; 1446 u8 *buf = (u8 *) bh->buf; 1447 1448 buf[0] = buf[1] = buf[2] = 0; 1449 buf[3] = 8; /* Only the Current/Maximum Capacity Descriptor */ 1450 buf += 4; 1451 1452 put_unaligned_be32(curlun->num_sectors, &buf[0]); 1453 /* Number of blocks */ 1454 put_unaligned_be32(curlun->blksize, &buf[4]);/* Block length */ 1455 buf[4] = 0x02; /* Current capacity */ 1456 return 12; 1457 } 1458 1459 static int do_mode_select(struct fsg_common *common, struct fsg_buffhd *bh) 1460 { 1461 struct fsg_lun *curlun = common->curlun; 1462 1463 /* We don't support MODE SELECT */ 1464 if (curlun) 1465 curlun->sense_data = SS_INVALID_COMMAND; 1466 return -EINVAL; 1467 } 1468 1469 1470 /*-------------------------------------------------------------------------*/ 1471 1472 static int halt_bulk_in_endpoint(struct fsg_dev *fsg) 1473 { 1474 int rc; 1475 1476 rc = fsg_set_halt(fsg, fsg->bulk_in); 1477 if (rc == -EAGAIN) 1478 VDBG(fsg, "delayed bulk-in endpoint halt\n"); 1479 while (rc != 0) { 1480 if (rc != -EAGAIN) { 1481 WARNING(fsg, "usb_ep_set_halt -> %d\n", rc); 1482 rc = 0; 1483 break; 1484 } 1485 1486 /* Wait for a short time and then try again */ 1487 if (msleep_interruptible(100) != 0) 1488 return -EINTR; 1489 rc = usb_ep_set_halt(fsg->bulk_in); 1490 } 1491 return rc; 1492 } 1493 1494 static int wedge_bulk_in_endpoint(struct fsg_dev *fsg) 1495 { 1496 int rc; 1497 1498 DBG(fsg, "bulk-in set wedge\n"); 1499 rc = usb_ep_set_wedge(fsg->bulk_in); 1500 if (rc == -EAGAIN) 1501 VDBG(fsg, "delayed bulk-in endpoint wedge\n"); 1502 while (rc != 0) { 1503 if (rc != -EAGAIN) { 1504 WARNING(fsg, "usb_ep_set_wedge -> %d\n", rc); 1505 rc = 0; 1506 break; 1507 } 1508 1509 /* Wait for a short time and then try again */ 1510 if (msleep_interruptible(100) != 0) 1511 return -EINTR; 1512 rc = usb_ep_set_wedge(fsg->bulk_in); 1513 } 1514 return rc; 1515 } 1516 1517 static int throw_away_data(struct fsg_common *common) 1518 { 1519 struct fsg_buffhd *bh, *bh2; 1520 u32 amount; 1521 int rc; 1522 1523 for (bh = common->next_buffhd_to_drain; 1524 bh->state != BUF_STATE_EMPTY || common->usb_amount_left > 0; 1525 bh = common->next_buffhd_to_drain) { 1526 1527 /* Try to submit another request if we need one */ 1528 bh2 = common->next_buffhd_to_fill; 1529 if (bh2->state == BUF_STATE_EMPTY && 1530 common->usb_amount_left > 0) { 1531 amount = min(common->usb_amount_left, FSG_BUFLEN); 1532 1533 /* 1534 * Except at the end of the transfer, amount will be 1535 * equal to the buffer size, which is divisible by 1536 * the bulk-out maxpacket size. 1537 */ 1538 set_bulk_out_req_length(common, bh2, amount); 1539 if (!start_out_transfer(common, bh2)) 1540 /* Dunno what to do if common->fsg is NULL */ 1541 return -EIO; 1542 common->next_buffhd_to_fill = bh2->next; 1543 common->usb_amount_left -= amount; 1544 continue; 1545 } 1546 1547 /* Wait for the data to be received */ 1548 rc = sleep_thread(common, false, bh); 1549 if (rc) 1550 return rc; 1551 1552 /* Throw away the data in a filled buffer */ 1553 bh->state = BUF_STATE_EMPTY; 1554 common->next_buffhd_to_drain = bh->next; 1555 1556 /* A short packet or an error ends everything */ 1557 if (bh->outreq->actual < bh->bulk_out_intended_length || 1558 bh->outreq->status != 0) { 1559 raise_exception(common, FSG_STATE_ABORT_BULK_OUT); 1560 return -EINTR; 1561 } 1562 } 1563 return 0; 1564 } 1565 1566 static int finish_reply(struct fsg_common *common) 1567 { 1568 struct fsg_buffhd *bh = common->next_buffhd_to_fill; 1569 int rc = 0; 1570 1571 switch (common->data_dir) { 1572 case DATA_DIR_NONE: 1573 break; /* Nothing to send */ 1574 1575 /* 1576 * If we don't know whether the host wants to read or write, 1577 * this must be CB or CBI with an unknown command. We mustn't 1578 * try to send or receive any data. So stall both bulk pipes 1579 * if we can and wait for a reset. 1580 */ 1581 case DATA_DIR_UNKNOWN: 1582 if (!common->can_stall) { 1583 /* Nothing */ 1584 } else if (fsg_is_set(common)) { 1585 fsg_set_halt(common->fsg, common->fsg->bulk_out); 1586 rc = halt_bulk_in_endpoint(common->fsg); 1587 } else { 1588 /* Don't know what to do if common->fsg is NULL */ 1589 rc = -EIO; 1590 } 1591 break; 1592 1593 /* All but the last buffer of data must have already been sent */ 1594 case DATA_DIR_TO_HOST: 1595 if (common->data_size == 0) { 1596 /* Nothing to send */ 1597 1598 /* Don't know what to do if common->fsg is NULL */ 1599 } else if (!fsg_is_set(common)) { 1600 rc = -EIO; 1601 1602 /* If there's no residue, simply send the last buffer */ 1603 } else if (common->residue == 0) { 1604 bh->inreq->zero = 0; 1605 if (!start_in_transfer(common, bh)) 1606 return -EIO; 1607 common->next_buffhd_to_fill = bh->next; 1608 1609 /* 1610 * For Bulk-only, mark the end of the data with a short 1611 * packet. If we are allowed to stall, halt the bulk-in 1612 * endpoint. (Note: This violates the Bulk-Only Transport 1613 * specification, which requires us to pad the data if we 1614 * don't halt the endpoint. Presumably nobody will mind.) 1615 */ 1616 } else { 1617 bh->inreq->zero = 1; 1618 if (!start_in_transfer(common, bh)) 1619 rc = -EIO; 1620 common->next_buffhd_to_fill = bh->next; 1621 if (common->can_stall) 1622 rc = halt_bulk_in_endpoint(common->fsg); 1623 } 1624 break; 1625 1626 /* 1627 * We have processed all we want from the data the host has sent. 1628 * There may still be outstanding bulk-out requests. 1629 */ 1630 case DATA_DIR_FROM_HOST: 1631 if (common->residue == 0) { 1632 /* Nothing to receive */ 1633 1634 /* Did the host stop sending unexpectedly early? */ 1635 } else if (common->short_packet_received) { 1636 raise_exception(common, FSG_STATE_ABORT_BULK_OUT); 1637 rc = -EINTR; 1638 1639 /* 1640 * We haven't processed all the incoming data. Even though 1641 * we may be allowed to stall, doing so would cause a race. 1642 * The controller may already have ACK'ed all the remaining 1643 * bulk-out packets, in which case the host wouldn't see a 1644 * STALL. Not realizing the endpoint was halted, it wouldn't 1645 * clear the halt -- leading to problems later on. 1646 */ 1647 #if 0 1648 } else if (common->can_stall) { 1649 if (fsg_is_set(common)) 1650 fsg_set_halt(common->fsg, 1651 common->fsg->bulk_out); 1652 raise_exception(common, FSG_STATE_ABORT_BULK_OUT); 1653 rc = -EINTR; 1654 #endif 1655 1656 /* 1657 * We can't stall. Read in the excess data and throw it 1658 * all away. 1659 */ 1660 } else { 1661 rc = throw_away_data(common); 1662 } 1663 break; 1664 } 1665 return rc; 1666 } 1667 1668 static void send_status(struct fsg_common *common) 1669 { 1670 struct fsg_lun *curlun = common->curlun; 1671 struct fsg_buffhd *bh; 1672 struct bulk_cs_wrap *csw; 1673 int rc; 1674 u8 status = US_BULK_STAT_OK; 1675 u32 sd, sdinfo = 0; 1676 1677 /* Wait for the next buffer to become available */ 1678 bh = common->next_buffhd_to_fill; 1679 rc = sleep_thread(common, false, bh); 1680 if (rc) 1681 return; 1682 1683 if (curlun) { 1684 sd = curlun->sense_data; 1685 sdinfo = curlun->sense_data_info; 1686 } else if (common->bad_lun_okay) { 1687 sd = NO_SENSE; 1688 } else { 1689 sd = SS_LOGICAL_UNIT_NOT_SUPPORTED; 1690 } 1691 1692 if (common->phase_error) { 1693 DBG(common, "sending phase-error status\n"); 1694 status = US_BULK_STAT_PHASE; 1695 sd = SS_INVALID_COMMAND; 1696 } else if (sd != NO_SENSE) { 1697 DBG(common, "sending command-failure status\n"); 1698 status = US_BULK_STAT_FAIL; 1699 VDBG(common, " sense data: SK x%02x, ASC x%02x, ASCQ x%02x;" 1700 " info x%x\n", 1701 usb_sense_key(sd), usb_sense_asc(sd), 1702 usb_sense_ascq(sd), sdinfo); 1703 } 1704 1705 /* Store and send the Bulk-only CSW */ 1706 csw = (void *)bh->buf; 1707 1708 csw->Signature = cpu_to_le32(US_BULK_CS_SIGN); 1709 csw->Tag = common->tag; 1710 csw->Residue = cpu_to_le32(common->residue); 1711 csw->Status = status; 1712 1713 bh->inreq->length = US_BULK_CS_WRAP_LEN; 1714 bh->inreq->zero = 0; 1715 if (!start_in_transfer(common, bh)) 1716 /* Don't know what to do if common->fsg is NULL */ 1717 return; 1718 1719 common->next_buffhd_to_fill = bh->next; 1720 return; 1721 } 1722 1723 1724 /*-------------------------------------------------------------------------*/ 1725 1726 /* 1727 * Check whether the command is properly formed and whether its data size 1728 * and direction agree with the values we already have. 1729 */ 1730 static int check_command(struct fsg_common *common, int cmnd_size, 1731 enum data_direction data_dir, unsigned int mask, 1732 int needs_medium, const char *name) 1733 { 1734 int i; 1735 unsigned int lun = common->cmnd[1] >> 5; 1736 static const char dirletter[4] = {'u', 'o', 'i', 'n'}; 1737 char hdlen[20]; 1738 struct fsg_lun *curlun; 1739 1740 hdlen[0] = 0; 1741 if (common->data_dir != DATA_DIR_UNKNOWN) 1742 sprintf(hdlen, ", H%c=%u", dirletter[(int) common->data_dir], 1743 common->data_size); 1744 VDBG(common, "SCSI command: %s; Dc=%d, D%c=%u; Hc=%d%s\n", 1745 name, cmnd_size, dirletter[(int) data_dir], 1746 common->data_size_from_cmnd, common->cmnd_size, hdlen); 1747 1748 /* 1749 * We can't reply at all until we know the correct data direction 1750 * and size. 1751 */ 1752 if (common->data_size_from_cmnd == 0) 1753 data_dir = DATA_DIR_NONE; 1754 if (common->data_size < common->data_size_from_cmnd) { 1755 /* 1756 * Host data size < Device data size is a phase error. 1757 * Carry out the command, but only transfer as much as 1758 * we are allowed. 1759 */ 1760 common->data_size_from_cmnd = common->data_size; 1761 common->phase_error = 1; 1762 } 1763 common->residue = common->data_size; 1764 common->usb_amount_left = common->data_size; 1765 1766 /* Conflicting data directions is a phase error */ 1767 if (common->data_dir != data_dir && common->data_size_from_cmnd > 0) { 1768 common->phase_error = 1; 1769 return -EINVAL; 1770 } 1771 1772 /* Verify the length of the command itself */ 1773 if (cmnd_size != common->cmnd_size) { 1774 1775 /* 1776 * Special case workaround: There are plenty of buggy SCSI 1777 * implementations. Many have issues with cbw->Length 1778 * field passing a wrong command size. For those cases we 1779 * always try to work around the problem by using the length 1780 * sent by the host side provided it is at least as large 1781 * as the correct command length. 1782 * Examples of such cases would be MS-Windows, which issues 1783 * REQUEST SENSE with cbw->Length == 12 where it should 1784 * be 6, and xbox360 issuing INQUIRY, TEST UNIT READY and 1785 * REQUEST SENSE with cbw->Length == 10 where it should 1786 * be 6 as well. 1787 */ 1788 if (cmnd_size <= common->cmnd_size) { 1789 DBG(common, "%s is buggy! Expected length %d " 1790 "but we got %d\n", name, 1791 cmnd_size, common->cmnd_size); 1792 cmnd_size = common->cmnd_size; 1793 } else { 1794 common->phase_error = 1; 1795 return -EINVAL; 1796 } 1797 } 1798 1799 /* Check that the LUN values are consistent */ 1800 if (common->lun != lun) 1801 DBG(common, "using LUN %u from CBW, not LUN %u from CDB\n", 1802 common->lun, lun); 1803 1804 /* Check the LUN */ 1805 curlun = common->curlun; 1806 if (curlun) { 1807 if (common->cmnd[0] != REQUEST_SENSE) { 1808 curlun->sense_data = NO_SENSE; 1809 curlun->sense_data_info = 0; 1810 curlun->info_valid = 0; 1811 } 1812 } else { 1813 common->bad_lun_okay = 0; 1814 1815 /* 1816 * INQUIRY and REQUEST SENSE commands are explicitly allowed 1817 * to use unsupported LUNs; all others may not. 1818 */ 1819 if (common->cmnd[0] != INQUIRY && 1820 common->cmnd[0] != REQUEST_SENSE) { 1821 DBG(common, "unsupported LUN %u\n", common->lun); 1822 return -EINVAL; 1823 } 1824 } 1825 1826 /* 1827 * If a unit attention condition exists, only INQUIRY and 1828 * REQUEST SENSE commands are allowed; anything else must fail. 1829 */ 1830 if (curlun && curlun->unit_attention_data != NO_SENSE && 1831 common->cmnd[0] != INQUIRY && 1832 common->cmnd[0] != REQUEST_SENSE) { 1833 curlun->sense_data = curlun->unit_attention_data; 1834 curlun->unit_attention_data = NO_SENSE; 1835 return -EINVAL; 1836 } 1837 1838 /* Check that only command bytes listed in the mask are non-zero */ 1839 common->cmnd[1] &= 0x1f; /* Mask away the LUN */ 1840 for (i = 1; i < cmnd_size; ++i) { 1841 if (common->cmnd[i] && !(mask & (1 << i))) { 1842 if (curlun) 1843 curlun->sense_data = SS_INVALID_FIELD_IN_CDB; 1844 return -EINVAL; 1845 } 1846 } 1847 1848 /* If the medium isn't mounted and the command needs to access 1849 * it, return an error. */ 1850 if (curlun && !fsg_lun_is_open(curlun) && needs_medium) { 1851 curlun->sense_data = SS_MEDIUM_NOT_PRESENT; 1852 return -EINVAL; 1853 } 1854 1855 return 0; 1856 } 1857 1858 /* wrapper of check_command for data size in blocks handling */ 1859 static int check_command_size_in_blocks(struct fsg_common *common, 1860 int cmnd_size, enum data_direction data_dir, 1861 unsigned int mask, int needs_medium, const char *name) 1862 { 1863 if (common->curlun) { 1864 if (check_shl_overflow(common->data_size_from_cmnd, 1865 common->curlun->blkbits, 1866 &common->data_size_from_cmnd)) { 1867 common->phase_error = 1; 1868 return -EINVAL; 1869 } 1870 } 1871 1872 return check_command(common, cmnd_size, data_dir, 1873 mask, needs_medium, name); 1874 } 1875 1876 static int do_scsi_command(struct fsg_common *common) 1877 { 1878 struct fsg_buffhd *bh; 1879 int rc; 1880 int reply = -EINVAL; 1881 int i; 1882 static char unknown[16]; 1883 1884 dump_cdb(common); 1885 1886 /* Wait for the next buffer to become available for data or status */ 1887 bh = common->next_buffhd_to_fill; 1888 common->next_buffhd_to_drain = bh; 1889 rc = sleep_thread(common, false, bh); 1890 if (rc) 1891 return rc; 1892 1893 common->phase_error = 0; 1894 common->short_packet_received = 0; 1895 1896 down_read(&common->filesem); /* We're using the backing file */ 1897 switch (common->cmnd[0]) { 1898 1899 case INQUIRY: 1900 common->data_size_from_cmnd = common->cmnd[4]; 1901 reply = check_command(common, 6, DATA_DIR_TO_HOST, 1902 (1<<4), 0, 1903 "INQUIRY"); 1904 if (reply == 0) 1905 reply = do_inquiry(common, bh); 1906 break; 1907 1908 case MODE_SELECT: 1909 common->data_size_from_cmnd = common->cmnd[4]; 1910 reply = check_command(common, 6, DATA_DIR_FROM_HOST, 1911 (1<<1) | (1<<4), 0, 1912 "MODE SELECT(6)"); 1913 if (reply == 0) 1914 reply = do_mode_select(common, bh); 1915 break; 1916 1917 case MODE_SELECT_10: 1918 common->data_size_from_cmnd = 1919 get_unaligned_be16(&common->cmnd[7]); 1920 reply = check_command(common, 10, DATA_DIR_FROM_HOST, 1921 (1<<1) | (3<<7), 0, 1922 "MODE SELECT(10)"); 1923 if (reply == 0) 1924 reply = do_mode_select(common, bh); 1925 break; 1926 1927 case MODE_SENSE: 1928 common->data_size_from_cmnd = common->cmnd[4]; 1929 reply = check_command(common, 6, DATA_DIR_TO_HOST, 1930 (1<<1) | (1<<2) | (1<<4), 0, 1931 "MODE SENSE(6)"); 1932 if (reply == 0) 1933 reply = do_mode_sense(common, bh); 1934 break; 1935 1936 case MODE_SENSE_10: 1937 common->data_size_from_cmnd = 1938 get_unaligned_be16(&common->cmnd[7]); 1939 reply = check_command(common, 10, DATA_DIR_TO_HOST, 1940 (1<<1) | (1<<2) | (3<<7), 0, 1941 "MODE SENSE(10)"); 1942 if (reply == 0) 1943 reply = do_mode_sense(common, bh); 1944 break; 1945 1946 case ALLOW_MEDIUM_REMOVAL: 1947 common->data_size_from_cmnd = 0; 1948 reply = check_command(common, 6, DATA_DIR_NONE, 1949 (1<<4), 0, 1950 "PREVENT-ALLOW MEDIUM REMOVAL"); 1951 if (reply == 0) 1952 reply = do_prevent_allow(common); 1953 break; 1954 1955 case READ_6: 1956 i = common->cmnd[4]; 1957 common->data_size_from_cmnd = (i == 0) ? 256 : i; 1958 reply = check_command_size_in_blocks(common, 6, 1959 DATA_DIR_TO_HOST, 1960 (7<<1) | (1<<4), 1, 1961 "READ(6)"); 1962 if (reply == 0) 1963 reply = do_read(common); 1964 break; 1965 1966 case READ_10: 1967 common->data_size_from_cmnd = 1968 get_unaligned_be16(&common->cmnd[7]); 1969 reply = check_command_size_in_blocks(common, 10, 1970 DATA_DIR_TO_HOST, 1971 (1<<1) | (0xf<<2) | (3<<7), 1, 1972 "READ(10)"); 1973 if (reply == 0) 1974 reply = do_read(common); 1975 break; 1976 1977 case READ_12: 1978 common->data_size_from_cmnd = 1979 get_unaligned_be32(&common->cmnd[6]); 1980 reply = check_command_size_in_blocks(common, 12, 1981 DATA_DIR_TO_HOST, 1982 (1<<1) | (0xf<<2) | (0xf<<6), 1, 1983 "READ(12)"); 1984 if (reply == 0) 1985 reply = do_read(common); 1986 break; 1987 1988 case READ_16: 1989 common->data_size_from_cmnd = 1990 get_unaligned_be32(&common->cmnd[10]); 1991 reply = check_command_size_in_blocks(common, 16, 1992 DATA_DIR_TO_HOST, 1993 (1<<1) | (0xff<<2) | (0xf<<10), 1, 1994 "READ(16)"); 1995 if (reply == 0) 1996 reply = do_read(common); 1997 break; 1998 1999 case READ_CAPACITY: 2000 common->data_size_from_cmnd = 8; 2001 reply = check_command(common, 10, DATA_DIR_TO_HOST, 2002 (0xf<<2) | (1<<8), 1, 2003 "READ CAPACITY"); 2004 if (reply == 0) 2005 reply = do_read_capacity(common, bh); 2006 break; 2007 2008 case READ_HEADER: 2009 if (!common->curlun || !common->curlun->cdrom) 2010 goto unknown_cmnd; 2011 common->data_size_from_cmnd = 2012 get_unaligned_be16(&common->cmnd[7]); 2013 reply = check_command(common, 10, DATA_DIR_TO_HOST, 2014 (3<<7) | (0x1f<<1), 1, 2015 "READ HEADER"); 2016 if (reply == 0) 2017 reply = do_read_header(common, bh); 2018 break; 2019 2020 case READ_TOC: 2021 if (!common->curlun || !common->curlun->cdrom) 2022 goto unknown_cmnd; 2023 common->data_size_from_cmnd = 2024 get_unaligned_be16(&common->cmnd[7]); 2025 reply = check_command(common, 10, DATA_DIR_TO_HOST, 2026 (0xf<<6) | (3<<1), 1, 2027 "READ TOC"); 2028 if (reply == 0) 2029 reply = do_read_toc(common, bh); 2030 break; 2031 2032 case READ_FORMAT_CAPACITIES: 2033 common->data_size_from_cmnd = 2034 get_unaligned_be16(&common->cmnd[7]); 2035 reply = check_command(common, 10, DATA_DIR_TO_HOST, 2036 (3<<7), 1, 2037 "READ FORMAT CAPACITIES"); 2038 if (reply == 0) 2039 reply = do_read_format_capacities(common, bh); 2040 break; 2041 2042 case REQUEST_SENSE: 2043 common->data_size_from_cmnd = common->cmnd[4]; 2044 reply = check_command(common, 6, DATA_DIR_TO_HOST, 2045 (1<<4), 0, 2046 "REQUEST SENSE"); 2047 if (reply == 0) 2048 reply = do_request_sense(common, bh); 2049 break; 2050 2051 case SERVICE_ACTION_IN_16: 2052 switch (common->cmnd[1] & 0x1f) { 2053 2054 case SAI_READ_CAPACITY_16: 2055 common->data_size_from_cmnd = 2056 get_unaligned_be32(&common->cmnd[10]); 2057 reply = check_command(common, 16, DATA_DIR_TO_HOST, 2058 (1<<1) | (0xff<<2) | (0xf<<10) | 2059 (1<<14), 1, 2060 "READ CAPACITY(16)"); 2061 if (reply == 0) 2062 reply = do_read_capacity_16(common, bh); 2063 break; 2064 2065 default: 2066 goto unknown_cmnd; 2067 } 2068 break; 2069 2070 case START_STOP: 2071 common->data_size_from_cmnd = 0; 2072 reply = check_command(common, 6, DATA_DIR_NONE, 2073 (1<<1) | (1<<4), 0, 2074 "START-STOP UNIT"); 2075 if (reply == 0) 2076 reply = do_start_stop(common); 2077 break; 2078 2079 case SYNCHRONIZE_CACHE: 2080 common->data_size_from_cmnd = 0; 2081 reply = check_command(common, 10, DATA_DIR_NONE, 2082 (0xf<<2) | (3<<7), 1, 2083 "SYNCHRONIZE CACHE"); 2084 if (reply == 0) 2085 reply = do_synchronize_cache(common); 2086 break; 2087 2088 case TEST_UNIT_READY: 2089 common->data_size_from_cmnd = 0; 2090 reply = check_command(common, 6, DATA_DIR_NONE, 2091 0, 1, 2092 "TEST UNIT READY"); 2093 break; 2094 2095 /* 2096 * Although optional, this command is used by MS-Windows. We 2097 * support a minimal version: BytChk must be 0. 2098 */ 2099 case VERIFY: 2100 common->data_size_from_cmnd = 0; 2101 reply = check_command(common, 10, DATA_DIR_NONE, 2102 (1<<1) | (0xf<<2) | (3<<7), 1, 2103 "VERIFY"); 2104 if (reply == 0) 2105 reply = do_verify(common); 2106 break; 2107 2108 case WRITE_6: 2109 i = common->cmnd[4]; 2110 common->data_size_from_cmnd = (i == 0) ? 256 : i; 2111 reply = check_command_size_in_blocks(common, 6, 2112 DATA_DIR_FROM_HOST, 2113 (7<<1) | (1<<4), 1, 2114 "WRITE(6)"); 2115 if (reply == 0) 2116 reply = do_write(common); 2117 break; 2118 2119 case WRITE_10: 2120 common->data_size_from_cmnd = 2121 get_unaligned_be16(&common->cmnd[7]); 2122 reply = check_command_size_in_blocks(common, 10, 2123 DATA_DIR_FROM_HOST, 2124 (1<<1) | (0xf<<2) | (3<<7), 1, 2125 "WRITE(10)"); 2126 if (reply == 0) 2127 reply = do_write(common); 2128 break; 2129 2130 case WRITE_12: 2131 common->data_size_from_cmnd = 2132 get_unaligned_be32(&common->cmnd[6]); 2133 reply = check_command_size_in_blocks(common, 12, 2134 DATA_DIR_FROM_HOST, 2135 (1<<1) | (0xf<<2) | (0xf<<6), 1, 2136 "WRITE(12)"); 2137 if (reply == 0) 2138 reply = do_write(common); 2139 break; 2140 2141 case WRITE_16: 2142 common->data_size_from_cmnd = 2143 get_unaligned_be32(&common->cmnd[10]); 2144 reply = check_command_size_in_blocks(common, 16, 2145 DATA_DIR_FROM_HOST, 2146 (1<<1) | (0xff<<2) | (0xf<<10), 1, 2147 "WRITE(16)"); 2148 if (reply == 0) 2149 reply = do_write(common); 2150 break; 2151 2152 /* 2153 * Some mandatory commands that we recognize but don't implement. 2154 * They don't mean much in this setting. It's left as an exercise 2155 * for anyone interested to implement RESERVE and RELEASE in terms 2156 * of Posix locks. 2157 */ 2158 case FORMAT_UNIT: 2159 case RELEASE_6: 2160 case RESERVE_6: 2161 case SEND_DIAGNOSTIC: 2162 2163 default: 2164 unknown_cmnd: 2165 common->data_size_from_cmnd = 0; 2166 sprintf(unknown, "Unknown x%02x", common->cmnd[0]); 2167 reply = check_command(common, common->cmnd_size, 2168 DATA_DIR_UNKNOWN, ~0, 0, unknown); 2169 if (reply == 0) { 2170 common->curlun->sense_data = SS_INVALID_COMMAND; 2171 reply = -EINVAL; 2172 } 2173 break; 2174 } 2175 up_read(&common->filesem); 2176 2177 if (reply == -EINTR || signal_pending(current)) 2178 return -EINTR; 2179 2180 /* Set up the single reply buffer for finish_reply() */ 2181 if (reply == -EINVAL) 2182 reply = 0; /* Error reply length */ 2183 if (reply >= 0 && common->data_dir == DATA_DIR_TO_HOST) { 2184 reply = min_t(u32, reply, common->data_size_from_cmnd); 2185 bh->inreq->length = reply; 2186 bh->state = BUF_STATE_FULL; 2187 common->residue -= reply; 2188 } /* Otherwise it's already set */ 2189 2190 return 0; 2191 } 2192 2193 2194 /*-------------------------------------------------------------------------*/ 2195 2196 static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh) 2197 { 2198 struct usb_request *req = bh->outreq; 2199 struct bulk_cb_wrap *cbw = req->buf; 2200 struct fsg_common *common = fsg->common; 2201 2202 /* Was this a real packet? Should it be ignored? */ 2203 if (req->status || test_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags)) 2204 return -EINVAL; 2205 2206 /* Is the CBW valid? */ 2207 if (req->actual != US_BULK_CB_WRAP_LEN || 2208 cbw->Signature != cpu_to_le32( 2209 US_BULK_CB_SIGN)) { 2210 DBG(fsg, "invalid CBW: len %u sig 0x%x\n", 2211 req->actual, 2212 le32_to_cpu(cbw->Signature)); 2213 2214 /* 2215 * The Bulk-only spec says we MUST stall the IN endpoint 2216 * (6.6.1), so it's unavoidable. It also says we must 2217 * retain this state until the next reset, but there's 2218 * no way to tell the controller driver it should ignore 2219 * Clear-Feature(HALT) requests. 2220 * 2221 * We aren't required to halt the OUT endpoint; instead 2222 * we can simply accept and discard any data received 2223 * until the next reset. 2224 */ 2225 wedge_bulk_in_endpoint(fsg); 2226 set_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); 2227 return -EINVAL; 2228 } 2229 2230 /* Is the CBW meaningful? */ 2231 if (cbw->Lun >= ARRAY_SIZE(common->luns) || 2232 cbw->Flags & ~US_BULK_FLAG_IN || cbw->Length <= 0 || 2233 cbw->Length > MAX_COMMAND_SIZE) { 2234 DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, " 2235 "cmdlen %u\n", 2236 cbw->Lun, cbw->Flags, cbw->Length); 2237 2238 /* 2239 * We can do anything we want here, so let's stall the 2240 * bulk pipes if we are allowed to. 2241 */ 2242 if (common->can_stall) { 2243 fsg_set_halt(fsg, fsg->bulk_out); 2244 halt_bulk_in_endpoint(fsg); 2245 } 2246 return -EINVAL; 2247 } 2248 2249 /* Save the command for later */ 2250 common->cmnd_size = cbw->Length; 2251 memcpy(common->cmnd, cbw->CDB, common->cmnd_size); 2252 if (cbw->Flags & US_BULK_FLAG_IN) 2253 common->data_dir = DATA_DIR_TO_HOST; 2254 else 2255 common->data_dir = DATA_DIR_FROM_HOST; 2256 common->data_size = le32_to_cpu(cbw->DataTransferLength); 2257 if (common->data_size == 0) 2258 common->data_dir = DATA_DIR_NONE; 2259 common->lun = cbw->Lun; 2260 if (common->lun < ARRAY_SIZE(common->luns)) 2261 common->curlun = common->luns[common->lun]; 2262 else 2263 common->curlun = NULL; 2264 common->tag = cbw->Tag; 2265 return 0; 2266 } 2267 2268 static int get_next_command(struct fsg_common *common) 2269 { 2270 struct fsg_buffhd *bh; 2271 int rc = 0; 2272 2273 /* Wait for the next buffer to become available */ 2274 bh = common->next_buffhd_to_fill; 2275 rc = sleep_thread(common, true, bh); 2276 if (rc) 2277 return rc; 2278 2279 /* Queue a request to read a Bulk-only CBW */ 2280 set_bulk_out_req_length(common, bh, US_BULK_CB_WRAP_LEN); 2281 if (!start_out_transfer(common, bh)) 2282 /* Don't know what to do if common->fsg is NULL */ 2283 return -EIO; 2284 2285 /* 2286 * We will drain the buffer in software, which means we 2287 * can reuse it for the next filling. No need to advance 2288 * next_buffhd_to_fill. 2289 */ 2290 2291 /* Wait for the CBW to arrive */ 2292 rc = sleep_thread(common, true, bh); 2293 if (rc) 2294 return rc; 2295 2296 rc = fsg_is_set(common) ? received_cbw(common->fsg, bh) : -EIO; 2297 bh->state = BUF_STATE_EMPTY; 2298 2299 return rc; 2300 } 2301 2302 2303 /*-------------------------------------------------------------------------*/ 2304 2305 static int alloc_request(struct fsg_common *common, struct usb_ep *ep, 2306 struct usb_request **preq) 2307 { 2308 *preq = usb_ep_alloc_request(ep, GFP_ATOMIC); 2309 if (*preq) 2310 return 0; 2311 ERROR(common, "can't allocate request for %s\n", ep->name); 2312 return -ENOMEM; 2313 } 2314 2315 /* Reset interface setting and re-init endpoint state (toggle etc). */ 2316 static int do_set_interface(struct fsg_common *common, struct fsg_dev *new_fsg) 2317 { 2318 struct fsg_dev *fsg; 2319 int i, rc = 0; 2320 2321 if (common->running) 2322 DBG(common, "reset interface\n"); 2323 2324 reset: 2325 /* Deallocate the requests */ 2326 if (common->fsg) { 2327 fsg = common->fsg; 2328 2329 for (i = 0; i < common->fsg_num_buffers; ++i) { 2330 struct fsg_buffhd *bh = &common->buffhds[i]; 2331 2332 if (bh->inreq) { 2333 usb_ep_free_request(fsg->bulk_in, bh->inreq); 2334 bh->inreq = NULL; 2335 } 2336 if (bh->outreq) { 2337 usb_ep_free_request(fsg->bulk_out, bh->outreq); 2338 bh->outreq = NULL; 2339 } 2340 } 2341 2342 /* Disable the endpoints */ 2343 if (fsg->bulk_in_enabled) { 2344 usb_ep_disable(fsg->bulk_in); 2345 fsg->bulk_in_enabled = 0; 2346 } 2347 if (fsg->bulk_out_enabled) { 2348 usb_ep_disable(fsg->bulk_out); 2349 fsg->bulk_out_enabled = 0; 2350 } 2351 2352 common->fsg = NULL; 2353 wake_up(&common->fsg_wait); 2354 } 2355 2356 common->running = 0; 2357 if (!new_fsg || rc) 2358 return rc; 2359 2360 common->fsg = new_fsg; 2361 fsg = common->fsg; 2362 2363 /* Enable the endpoints */ 2364 rc = config_ep_by_speed(common->gadget, &(fsg->function), fsg->bulk_in); 2365 if (rc) 2366 goto reset; 2367 rc = usb_ep_enable(fsg->bulk_in); 2368 if (rc) 2369 goto reset; 2370 fsg->bulk_in->driver_data = common; 2371 fsg->bulk_in_enabled = 1; 2372 2373 rc = config_ep_by_speed(common->gadget, &(fsg->function), 2374 fsg->bulk_out); 2375 if (rc) 2376 goto reset; 2377 rc = usb_ep_enable(fsg->bulk_out); 2378 if (rc) 2379 goto reset; 2380 fsg->bulk_out->driver_data = common; 2381 fsg->bulk_out_enabled = 1; 2382 common->bulk_out_maxpacket = usb_endpoint_maxp(fsg->bulk_out->desc); 2383 clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); 2384 2385 /* Allocate the requests */ 2386 for (i = 0; i < common->fsg_num_buffers; ++i) { 2387 struct fsg_buffhd *bh = &common->buffhds[i]; 2388 2389 rc = alloc_request(common, fsg->bulk_in, &bh->inreq); 2390 if (rc) 2391 goto reset; 2392 rc = alloc_request(common, fsg->bulk_out, &bh->outreq); 2393 if (rc) 2394 goto reset; 2395 bh->inreq->buf = bh->outreq->buf = bh->buf; 2396 bh->inreq->context = bh->outreq->context = bh; 2397 bh->inreq->complete = bulk_in_complete; 2398 bh->outreq->complete = bulk_out_complete; 2399 } 2400 2401 common->running = 1; 2402 for (i = 0; i < ARRAY_SIZE(common->luns); ++i) 2403 if (common->luns[i]) 2404 common->luns[i]->unit_attention_data = 2405 SS_RESET_OCCURRED; 2406 return rc; 2407 } 2408 2409 2410 /****************************** ALT CONFIGS ******************************/ 2411 2412 static int fsg_set_alt(struct usb_function *f, unsigned intf, unsigned alt) 2413 { 2414 struct fsg_dev *fsg = fsg_from_func(f); 2415 2416 __raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE, fsg); 2417 return USB_GADGET_DELAYED_STATUS; 2418 } 2419 2420 static void fsg_disable(struct usb_function *f) 2421 { 2422 struct fsg_dev *fsg = fsg_from_func(f); 2423 2424 /* Disable the endpoints */ 2425 if (fsg->bulk_in_enabled) { 2426 usb_ep_disable(fsg->bulk_in); 2427 fsg->bulk_in_enabled = 0; 2428 } 2429 if (fsg->bulk_out_enabled) { 2430 usb_ep_disable(fsg->bulk_out); 2431 fsg->bulk_out_enabled = 0; 2432 } 2433 2434 __raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE, NULL); 2435 } 2436 2437 2438 /*-------------------------------------------------------------------------*/ 2439 2440 static void handle_exception(struct fsg_common *common) 2441 { 2442 int i; 2443 struct fsg_buffhd *bh; 2444 enum fsg_state old_state; 2445 struct fsg_lun *curlun; 2446 unsigned int exception_req_tag; 2447 struct fsg_dev *new_fsg; 2448 2449 /* 2450 * Clear the existing signals. Anything but SIGUSR1 is converted 2451 * into a high-priority EXIT exception. 2452 */ 2453 for (;;) { 2454 int sig = kernel_dequeue_signal(); 2455 if (!sig) 2456 break; 2457 if (sig != SIGUSR1) { 2458 spin_lock_irq(&common->lock); 2459 if (common->state < FSG_STATE_EXIT) 2460 DBG(common, "Main thread exiting on signal\n"); 2461 common->state = FSG_STATE_EXIT; 2462 spin_unlock_irq(&common->lock); 2463 } 2464 } 2465 2466 /* Cancel all the pending transfers */ 2467 if (likely(common->fsg)) { 2468 for (i = 0; i < common->fsg_num_buffers; ++i) { 2469 bh = &common->buffhds[i]; 2470 if (bh->state == BUF_STATE_SENDING) 2471 usb_ep_dequeue(common->fsg->bulk_in, bh->inreq); 2472 if (bh->state == BUF_STATE_RECEIVING) 2473 usb_ep_dequeue(common->fsg->bulk_out, 2474 bh->outreq); 2475 2476 /* Wait for a transfer to become idle */ 2477 if (sleep_thread(common, false, bh)) 2478 return; 2479 } 2480 2481 /* Clear out the controller's fifos */ 2482 if (common->fsg->bulk_in_enabled) 2483 usb_ep_fifo_flush(common->fsg->bulk_in); 2484 if (common->fsg->bulk_out_enabled) 2485 usb_ep_fifo_flush(common->fsg->bulk_out); 2486 } 2487 2488 /* 2489 * Reset the I/O buffer states and pointers, the SCSI 2490 * state, and the exception. Then invoke the handler. 2491 */ 2492 spin_lock_irq(&common->lock); 2493 2494 for (i = 0; i < common->fsg_num_buffers; ++i) { 2495 bh = &common->buffhds[i]; 2496 bh->state = BUF_STATE_EMPTY; 2497 } 2498 common->next_buffhd_to_fill = &common->buffhds[0]; 2499 common->next_buffhd_to_drain = &common->buffhds[0]; 2500 exception_req_tag = common->exception_req_tag; 2501 new_fsg = common->exception_arg; 2502 old_state = common->state; 2503 common->state = FSG_STATE_NORMAL; 2504 2505 if (old_state != FSG_STATE_ABORT_BULK_OUT) { 2506 for (i = 0; i < ARRAY_SIZE(common->luns); ++i) { 2507 curlun = common->luns[i]; 2508 if (!curlun) 2509 continue; 2510 curlun->prevent_medium_removal = 0; 2511 curlun->sense_data = NO_SENSE; 2512 curlun->unit_attention_data = NO_SENSE; 2513 curlun->sense_data_info = 0; 2514 curlun->info_valid = 0; 2515 } 2516 } 2517 spin_unlock_irq(&common->lock); 2518 2519 /* Carry out any extra actions required for the exception */ 2520 switch (old_state) { 2521 case FSG_STATE_NORMAL: 2522 break; 2523 2524 case FSG_STATE_ABORT_BULK_OUT: 2525 send_status(common); 2526 break; 2527 2528 case FSG_STATE_PROTOCOL_RESET: 2529 /* 2530 * In case we were forced against our will to halt a 2531 * bulk endpoint, clear the halt now. (The SuperH UDC 2532 * requires this.) 2533 */ 2534 if (!fsg_is_set(common)) 2535 break; 2536 if (test_and_clear_bit(IGNORE_BULK_OUT, 2537 &common->fsg->atomic_bitflags)) 2538 usb_ep_clear_halt(common->fsg->bulk_in); 2539 2540 if (common->ep0_req_tag == exception_req_tag) 2541 ep0_queue(common); /* Complete the status stage */ 2542 2543 /* 2544 * Technically this should go here, but it would only be 2545 * a waste of time. Ditto for the INTERFACE_CHANGE and 2546 * CONFIG_CHANGE cases. 2547 */ 2548 /* for (i = 0; i < common->ARRAY_SIZE(common->luns); ++i) */ 2549 /* if (common->luns[i]) */ 2550 /* common->luns[i]->unit_attention_data = */ 2551 /* SS_RESET_OCCURRED; */ 2552 break; 2553 2554 case FSG_STATE_CONFIG_CHANGE: 2555 do_set_interface(common, new_fsg); 2556 if (new_fsg) 2557 usb_composite_setup_continue(common->cdev); 2558 break; 2559 2560 case FSG_STATE_EXIT: 2561 do_set_interface(common, NULL); /* Free resources */ 2562 spin_lock_irq(&common->lock); 2563 common->state = FSG_STATE_TERMINATED; /* Stop the thread */ 2564 spin_unlock_irq(&common->lock); 2565 break; 2566 2567 case FSG_STATE_TERMINATED: 2568 break; 2569 } 2570 } 2571 2572 2573 /*-------------------------------------------------------------------------*/ 2574 2575 static int fsg_main_thread(void *common_) 2576 { 2577 struct fsg_common *common = common_; 2578 int i; 2579 2580 /* 2581 * Allow the thread to be killed by a signal, but set the signal mask 2582 * to block everything but INT, TERM, KILL, and USR1. 2583 */ 2584 allow_signal(SIGINT); 2585 allow_signal(SIGTERM); 2586 allow_signal(SIGKILL); 2587 allow_signal(SIGUSR1); 2588 2589 /* Allow the thread to be frozen */ 2590 set_freezable(); 2591 2592 /* The main loop */ 2593 while (common->state != FSG_STATE_TERMINATED) { 2594 if (exception_in_progress(common) || signal_pending(current)) { 2595 handle_exception(common); 2596 continue; 2597 } 2598 2599 if (!common->running) { 2600 sleep_thread(common, true, NULL); 2601 continue; 2602 } 2603 2604 if (get_next_command(common) || exception_in_progress(common)) 2605 continue; 2606 if (do_scsi_command(common) || exception_in_progress(common)) 2607 continue; 2608 if (finish_reply(common) || exception_in_progress(common)) 2609 continue; 2610 send_status(common); 2611 } 2612 2613 spin_lock_irq(&common->lock); 2614 common->thread_task = NULL; 2615 spin_unlock_irq(&common->lock); 2616 2617 /* Eject media from all LUNs */ 2618 2619 down_write(&common->filesem); 2620 for (i = 0; i < ARRAY_SIZE(common->luns); i++) { 2621 struct fsg_lun *curlun = common->luns[i]; 2622 2623 if (curlun && fsg_lun_is_open(curlun)) 2624 fsg_lun_close(curlun); 2625 } 2626 up_write(&common->filesem); 2627 2628 /* Let fsg_unbind() know the thread has exited */ 2629 kthread_complete_and_exit(&common->thread_notifier, 0); 2630 } 2631 2632 2633 /*************************** DEVICE ATTRIBUTES ***************************/ 2634 2635 static ssize_t ro_show(struct device *dev, struct device_attribute *attr, char *buf) 2636 { 2637 struct fsg_lun *curlun = fsg_lun_from_dev(dev); 2638 2639 return fsg_show_ro(curlun, buf); 2640 } 2641 2642 static ssize_t nofua_show(struct device *dev, struct device_attribute *attr, 2643 char *buf) 2644 { 2645 struct fsg_lun *curlun = fsg_lun_from_dev(dev); 2646 2647 return fsg_show_nofua(curlun, buf); 2648 } 2649 2650 static ssize_t file_show(struct device *dev, struct device_attribute *attr, 2651 char *buf) 2652 { 2653 struct fsg_lun *curlun = fsg_lun_from_dev(dev); 2654 struct rw_semaphore *filesem = dev_get_drvdata(dev); 2655 2656 return fsg_show_file(curlun, filesem, buf); 2657 } 2658 2659 static ssize_t ro_store(struct device *dev, struct device_attribute *attr, 2660 const char *buf, size_t count) 2661 { 2662 struct fsg_lun *curlun = fsg_lun_from_dev(dev); 2663 struct rw_semaphore *filesem = dev_get_drvdata(dev); 2664 2665 return fsg_store_ro(curlun, filesem, buf, count); 2666 } 2667 2668 static ssize_t nofua_store(struct device *dev, struct device_attribute *attr, 2669 const char *buf, size_t count) 2670 { 2671 struct fsg_lun *curlun = fsg_lun_from_dev(dev); 2672 2673 return fsg_store_nofua(curlun, buf, count); 2674 } 2675 2676 static ssize_t file_store(struct device *dev, struct device_attribute *attr, 2677 const char *buf, size_t count) 2678 { 2679 struct fsg_lun *curlun = fsg_lun_from_dev(dev); 2680 struct rw_semaphore *filesem = dev_get_drvdata(dev); 2681 2682 return fsg_store_file(curlun, filesem, buf, count); 2683 } 2684 2685 static ssize_t forced_eject_store(struct device *dev, 2686 struct device_attribute *attr, 2687 const char *buf, size_t count) 2688 { 2689 struct fsg_lun *curlun = fsg_lun_from_dev(dev); 2690 struct rw_semaphore *filesem = dev_get_drvdata(dev); 2691 2692 return fsg_store_forced_eject(curlun, filesem, buf, count); 2693 } 2694 2695 static DEVICE_ATTR_RW(nofua); 2696 static DEVICE_ATTR_WO(forced_eject); 2697 2698 /* 2699 * Mode of the ro and file attribute files will be overridden in 2700 * fsg_lun_dev_is_visible() depending on if this is a cdrom, or if it is a 2701 * removable device. 2702 */ 2703 static DEVICE_ATTR_RW(ro); 2704 static DEVICE_ATTR_RW(file); 2705 2706 /****************************** FSG COMMON ******************************/ 2707 2708 static void fsg_lun_release(struct device *dev) 2709 { 2710 /* Nothing needs to be done */ 2711 } 2712 2713 static struct fsg_common *fsg_common_setup(struct fsg_common *common) 2714 { 2715 if (!common) { 2716 common = kzalloc_obj(*common); 2717 if (!common) 2718 return ERR_PTR(-ENOMEM); 2719 common->free_storage_on_release = 1; 2720 } else { 2721 common->free_storage_on_release = 0; 2722 } 2723 init_rwsem(&common->filesem); 2724 spin_lock_init(&common->lock); 2725 init_completion(&common->thread_notifier); 2726 init_waitqueue_head(&common->io_wait); 2727 init_waitqueue_head(&common->fsg_wait); 2728 common->state = FSG_STATE_TERMINATED; 2729 memset(common->luns, 0, sizeof(common->luns)); 2730 2731 return common; 2732 } 2733 2734 void fsg_common_set_sysfs(struct fsg_common *common, bool sysfs) 2735 { 2736 common->sysfs = sysfs; 2737 } 2738 EXPORT_SYMBOL_GPL(fsg_common_set_sysfs); 2739 2740 static void _fsg_common_free_buffers(struct fsg_buffhd *buffhds, unsigned n) 2741 { 2742 if (buffhds) { 2743 struct fsg_buffhd *bh = buffhds; 2744 while (n--) { 2745 kfree(bh->buf); 2746 ++bh; 2747 } 2748 kfree(buffhds); 2749 } 2750 } 2751 2752 int fsg_common_set_num_buffers(struct fsg_common *common, unsigned int n) 2753 { 2754 struct fsg_buffhd *bh, *buffhds; 2755 int i; 2756 2757 if (n < 2) 2758 return -EINVAL; 2759 2760 buffhds = kzalloc_objs(*buffhds, n); 2761 if (!buffhds) 2762 return -ENOMEM; 2763 2764 /* Data buffers cyclic list */ 2765 bh = buffhds; 2766 i = n; 2767 goto buffhds_first_it; 2768 do { 2769 bh->next = bh + 1; 2770 ++bh; 2771 buffhds_first_it: 2772 bh->buf = kmalloc(FSG_BUFLEN, GFP_KERNEL); 2773 if (unlikely(!bh->buf)) 2774 goto error_release; 2775 } while (--i); 2776 bh->next = buffhds; 2777 2778 _fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers); 2779 common->fsg_num_buffers = n; 2780 common->buffhds = buffhds; 2781 2782 return 0; 2783 2784 error_release: 2785 /* 2786 * "buf"s pointed to by heads after n - i are NULL 2787 * so releasing them won't hurt 2788 */ 2789 _fsg_common_free_buffers(buffhds, n); 2790 2791 return -ENOMEM; 2792 } 2793 EXPORT_SYMBOL_GPL(fsg_common_set_num_buffers); 2794 2795 void fsg_common_remove_lun(struct fsg_lun *lun) 2796 { 2797 if (device_is_registered(&lun->dev)) 2798 device_unregister(&lun->dev); 2799 fsg_lun_close(lun); 2800 kfree(lun); 2801 } 2802 EXPORT_SYMBOL_GPL(fsg_common_remove_lun); 2803 2804 static void _fsg_common_remove_luns(struct fsg_common *common, int n) 2805 { 2806 int i; 2807 2808 for (i = 0; i < n; ++i) 2809 if (common->luns[i]) { 2810 fsg_common_remove_lun(common->luns[i]); 2811 common->luns[i] = NULL; 2812 } 2813 } 2814 2815 void fsg_common_remove_luns(struct fsg_common *common) 2816 { 2817 _fsg_common_remove_luns(common, ARRAY_SIZE(common->luns)); 2818 } 2819 EXPORT_SYMBOL_GPL(fsg_common_remove_luns); 2820 2821 void fsg_common_free_buffers(struct fsg_common *common) 2822 { 2823 _fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers); 2824 common->buffhds = NULL; 2825 } 2826 EXPORT_SYMBOL_GPL(fsg_common_free_buffers); 2827 2828 int fsg_common_set_cdev(struct fsg_common *common, 2829 struct usb_composite_dev *cdev, bool can_stall) 2830 { 2831 struct usb_string *us; 2832 2833 common->gadget = cdev->gadget; 2834 common->ep0 = cdev->gadget->ep0; 2835 common->ep0req = cdev->req; 2836 common->cdev = cdev; 2837 2838 us = usb_gstrings_attach(cdev, fsg_strings_array, 2839 ARRAY_SIZE(fsg_strings)); 2840 if (IS_ERR(us)) 2841 return PTR_ERR(us); 2842 2843 fsg_intf_desc.iInterface = us[FSG_STRING_INTERFACE].id; 2844 2845 /* 2846 * Some peripheral controllers are known not to be able to 2847 * halt bulk endpoints correctly. If one of them is present, 2848 * disable stalls. 2849 */ 2850 common->can_stall = can_stall && 2851 gadget_is_stall_supported(common->gadget); 2852 2853 return 0; 2854 } 2855 EXPORT_SYMBOL_GPL(fsg_common_set_cdev); 2856 2857 static struct attribute *fsg_lun_dev_attrs[] = { 2858 &dev_attr_ro.attr, 2859 &dev_attr_file.attr, 2860 &dev_attr_nofua.attr, 2861 &dev_attr_forced_eject.attr, 2862 NULL 2863 }; 2864 2865 static umode_t fsg_lun_dev_is_visible(struct kobject *kobj, 2866 struct attribute *attr, int idx) 2867 { 2868 struct device *dev = kobj_to_dev(kobj); 2869 struct fsg_lun *lun = fsg_lun_from_dev(dev); 2870 2871 if (attr == &dev_attr_ro.attr) 2872 return lun->cdrom ? S_IRUGO : (S_IWUSR | S_IRUGO); 2873 if (attr == &dev_attr_file.attr) 2874 return lun->removable ? (S_IWUSR | S_IRUGO) : S_IRUGO; 2875 return attr->mode; 2876 } 2877 2878 static const struct attribute_group fsg_lun_dev_group = { 2879 .attrs = fsg_lun_dev_attrs, 2880 .is_visible = fsg_lun_dev_is_visible, 2881 }; 2882 2883 static const struct attribute_group *fsg_lun_dev_groups[] = { 2884 &fsg_lun_dev_group, 2885 NULL 2886 }; 2887 2888 int fsg_common_create_lun(struct fsg_common *common, struct fsg_lun_config *cfg, 2889 unsigned int id, const char *name, 2890 const char **name_pfx) 2891 { 2892 struct fsg_lun *lun; 2893 char *pathbuf = NULL, *p = "(no medium)"; 2894 int rc = -ENOMEM; 2895 2896 if (id >= ARRAY_SIZE(common->luns)) 2897 return -ENODEV; 2898 2899 if (common->luns[id]) 2900 return -EBUSY; 2901 2902 if (!cfg->filename && !cfg->removable) { 2903 pr_err("no file given for LUN%d\n", id); 2904 return -EINVAL; 2905 } 2906 2907 lun = kzalloc_obj(*lun); 2908 if (!lun) 2909 return -ENOMEM; 2910 2911 lun->name_pfx = name_pfx; 2912 2913 lun->cdrom = !!cfg->cdrom; 2914 lun->ro = cfg->cdrom || cfg->ro; 2915 lun->initially_ro = lun->ro; 2916 lun->removable = !!cfg->removable; 2917 2918 if (!common->sysfs) { 2919 /* we DON'T own the name!*/ 2920 lun->name = name; 2921 } else { 2922 lun->dev.release = fsg_lun_release; 2923 lun->dev.parent = &common->gadget->dev; 2924 lun->dev.groups = fsg_lun_dev_groups; 2925 dev_set_drvdata(&lun->dev, &common->filesem); 2926 dev_set_name(&lun->dev, "%s", name); 2927 lun->name = dev_name(&lun->dev); 2928 2929 rc = device_register(&lun->dev); 2930 if (rc) { 2931 pr_info("failed to register LUN%d: %d\n", id, rc); 2932 put_device(&lun->dev); 2933 goto error_sysfs; 2934 } 2935 } 2936 2937 common->luns[id] = lun; 2938 2939 if (cfg->filename) { 2940 rc = fsg_lun_open(lun, cfg->filename); 2941 if (rc) 2942 goto error_lun; 2943 2944 p = "(error)"; 2945 pathbuf = kmalloc(PATH_MAX, GFP_KERNEL); 2946 if (pathbuf) { 2947 p = file_path(lun->filp, pathbuf, PATH_MAX); 2948 if (IS_ERR(p)) 2949 p = "(error)"; 2950 } 2951 } 2952 pr_info("LUN: %s%s%sfile: %s\n", 2953 lun->removable ? "removable " : "", 2954 lun->ro ? "read only " : "", 2955 lun->cdrom ? "CD-ROM " : "", 2956 p); 2957 kfree(pathbuf); 2958 2959 return 0; 2960 2961 error_lun: 2962 if (device_is_registered(&lun->dev)) 2963 device_unregister(&lun->dev); 2964 common->luns[id] = NULL; 2965 error_sysfs: 2966 kfree(lun); 2967 return rc; 2968 } 2969 EXPORT_SYMBOL_GPL(fsg_common_create_lun); 2970 2971 int fsg_common_create_luns(struct fsg_common *common, struct fsg_config *cfg) 2972 { 2973 char buf[14]; 2974 int i, rc; 2975 2976 fsg_common_remove_luns(common); 2977 2978 for (i = 0; i < cfg->nluns; ++i) { 2979 snprintf(buf, sizeof(buf), "lun%d", i); 2980 rc = fsg_common_create_lun(common, &cfg->luns[i], i, buf, NULL); 2981 if (rc) 2982 goto fail; 2983 } 2984 2985 pr_info("Number of LUNs=%d\n", cfg->nluns); 2986 2987 return 0; 2988 2989 fail: 2990 _fsg_common_remove_luns(common, i); 2991 return rc; 2992 } 2993 EXPORT_SYMBOL_GPL(fsg_common_create_luns); 2994 2995 void fsg_common_set_inquiry_string(struct fsg_common *common, const char *vn, 2996 const char *pn) 2997 { 2998 int i; 2999 3000 /* Prepare inquiryString */ 3001 i = get_default_bcdDevice(); 3002 snprintf(common->inquiry_string, sizeof(common->inquiry_string), 3003 "%-8s%-16s%04x", vn ?: "Linux", 3004 /* Assume product name dependent on the first LUN */ 3005 pn ?: ((*common->luns)->cdrom 3006 ? "File-CD Gadget" 3007 : "File-Stor Gadget"), 3008 i); 3009 } 3010 EXPORT_SYMBOL_GPL(fsg_common_set_inquiry_string); 3011 3012 static void fsg_common_release(struct fsg_common *common) 3013 { 3014 int i; 3015 3016 /* If the thread isn't already dead, tell it to exit now */ 3017 if (common->state != FSG_STATE_TERMINATED) { 3018 raise_exception(common, FSG_STATE_EXIT); 3019 wait_for_completion(&common->thread_notifier); 3020 } 3021 3022 for (i = 0; i < ARRAY_SIZE(common->luns); ++i) { 3023 struct fsg_lun *lun = common->luns[i]; 3024 if (!lun) 3025 continue; 3026 fsg_lun_close(lun); 3027 if (device_is_registered(&lun->dev)) 3028 device_unregister(&lun->dev); 3029 kfree(lun); 3030 } 3031 3032 _fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers); 3033 if (common->free_storage_on_release) 3034 kfree(common); 3035 } 3036 3037 3038 /*-------------------------------------------------------------------------*/ 3039 3040 static int fsg_bind(struct usb_configuration *c, struct usb_function *f) 3041 { 3042 struct fsg_dev *fsg = fsg_from_func(f); 3043 struct fsg_common *common = fsg->common; 3044 struct usb_gadget *gadget = c->cdev->gadget; 3045 int i; 3046 struct usb_ep *ep; 3047 unsigned max_burst; 3048 int ret; 3049 struct fsg_opts *opts; 3050 3051 /* Don't allow to bind if we don't have at least one LUN */ 3052 ret = _fsg_common_get_max_lun(common); 3053 if (ret < 0) { 3054 pr_err("There should be at least one LUN.\n"); 3055 return -EINVAL; 3056 } 3057 3058 opts = fsg_opts_from_func_inst(f->fi); 3059 if (!opts->no_configfs) { 3060 ret = fsg_common_set_cdev(fsg->common, c->cdev, 3061 fsg->common->can_stall); 3062 if (ret) 3063 return ret; 3064 fsg_common_set_inquiry_string(fsg->common, NULL, NULL); 3065 } 3066 3067 if (!common->thread_task) { 3068 common->state = FSG_STATE_NORMAL; 3069 common->thread_task = 3070 kthread_run(fsg_main_thread, common, "file-storage"); 3071 if (IS_ERR(common->thread_task)) { 3072 ret = PTR_ERR(common->thread_task); 3073 common->thread_task = NULL; 3074 common->state = FSG_STATE_TERMINATED; 3075 return ret; 3076 } 3077 DBG(common, "I/O thread pid: %d\n", 3078 task_pid_nr(common->thread_task)); 3079 } 3080 3081 fsg->gadget = gadget; 3082 3083 /* New interface */ 3084 i = usb_interface_id(c, f); 3085 if (i < 0) 3086 goto fail; 3087 fsg_intf_desc.bInterfaceNumber = i; 3088 fsg->interface_number = i; 3089 3090 /* Find all the endpoints we will use */ 3091 ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_in_desc); 3092 if (!ep) 3093 goto autoconf_fail; 3094 fsg->bulk_in = ep; 3095 3096 ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_out_desc); 3097 if (!ep) 3098 goto autoconf_fail; 3099 fsg->bulk_out = ep; 3100 3101 /* Assume endpoint addresses are the same for both speeds */ 3102 fsg_hs_bulk_in_desc.bEndpointAddress = 3103 fsg_fs_bulk_in_desc.bEndpointAddress; 3104 fsg_hs_bulk_out_desc.bEndpointAddress = 3105 fsg_fs_bulk_out_desc.bEndpointAddress; 3106 3107 /* Calculate bMaxBurst, we know packet size is 1024 */ 3108 max_burst = min_t(unsigned, FSG_BUFLEN / 1024, 15); 3109 3110 fsg_ss_bulk_in_desc.bEndpointAddress = 3111 fsg_fs_bulk_in_desc.bEndpointAddress; 3112 fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst; 3113 3114 fsg_ss_bulk_out_desc.bEndpointAddress = 3115 fsg_fs_bulk_out_desc.bEndpointAddress; 3116 fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst; 3117 3118 ret = usb_assign_descriptors(f, fsg_fs_function, fsg_hs_function, 3119 fsg_ss_function, fsg_ss_function); 3120 if (ret) 3121 goto autoconf_fail; 3122 3123 return 0; 3124 3125 autoconf_fail: 3126 ERROR(fsg, "unable to autoconfigure all endpoints\n"); 3127 i = -ENOTSUPP; 3128 fail: 3129 /* terminate the thread */ 3130 if (fsg->common->state != FSG_STATE_TERMINATED) { 3131 raise_exception(fsg->common, FSG_STATE_EXIT); 3132 wait_for_completion(&fsg->common->thread_notifier); 3133 } 3134 return i; 3135 } 3136 3137 /****************************** ALLOCATE FUNCTION *************************/ 3138 3139 static void fsg_unbind(struct usb_configuration *c, struct usb_function *f) 3140 { 3141 struct fsg_dev *fsg = fsg_from_func(f); 3142 struct fsg_common *common = fsg->common; 3143 3144 DBG(fsg, "unbind\n"); 3145 if (fsg->common->fsg == fsg) { 3146 __raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE, NULL); 3147 /* FIXME: make interruptible or killable somehow? */ 3148 wait_event(common->fsg_wait, common->fsg != fsg); 3149 } 3150 3151 usb_free_all_descriptors(&fsg->function); 3152 } 3153 3154 static inline struct fsg_lun_opts *to_fsg_lun_opts(struct config_item *item) 3155 { 3156 return container_of(to_config_group(item), struct fsg_lun_opts, group); 3157 } 3158 3159 static inline struct fsg_opts *to_fsg_opts(struct config_item *item) 3160 { 3161 return container_of(to_config_group(item), struct fsg_opts, 3162 func_inst.group); 3163 } 3164 3165 static void fsg_lun_attr_release(struct config_item *item) 3166 { 3167 struct fsg_lun_opts *lun_opts; 3168 3169 lun_opts = to_fsg_lun_opts(item); 3170 kfree(lun_opts); 3171 } 3172 3173 static const struct configfs_item_operations fsg_lun_item_ops = { 3174 .release = fsg_lun_attr_release, 3175 }; 3176 3177 static ssize_t fsg_lun_opts_file_show(struct config_item *item, char *page) 3178 { 3179 struct fsg_lun_opts *opts = to_fsg_lun_opts(item); 3180 struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent); 3181 3182 return fsg_show_file(opts->lun, &fsg_opts->common->filesem, page); 3183 } 3184 3185 static ssize_t fsg_lun_opts_file_store(struct config_item *item, 3186 const char *page, size_t len) 3187 { 3188 struct fsg_lun_opts *opts = to_fsg_lun_opts(item); 3189 struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent); 3190 3191 return fsg_store_file(opts->lun, &fsg_opts->common->filesem, page, len); 3192 } 3193 3194 CONFIGFS_ATTR(fsg_lun_opts_, file); 3195 3196 static ssize_t fsg_lun_opts_ro_show(struct config_item *item, char *page) 3197 { 3198 return fsg_show_ro(to_fsg_lun_opts(item)->lun, page); 3199 } 3200 3201 static ssize_t fsg_lun_opts_ro_store(struct config_item *item, 3202 const char *page, size_t len) 3203 { 3204 struct fsg_lun_opts *opts = to_fsg_lun_opts(item); 3205 struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent); 3206 3207 return fsg_store_ro(opts->lun, &fsg_opts->common->filesem, page, len); 3208 } 3209 3210 CONFIGFS_ATTR(fsg_lun_opts_, ro); 3211 3212 static ssize_t fsg_lun_opts_removable_show(struct config_item *item, 3213 char *page) 3214 { 3215 return fsg_show_removable(to_fsg_lun_opts(item)->lun, page); 3216 } 3217 3218 static ssize_t fsg_lun_opts_removable_store(struct config_item *item, 3219 const char *page, size_t len) 3220 { 3221 return fsg_store_removable(to_fsg_lun_opts(item)->lun, page, len); 3222 } 3223 3224 CONFIGFS_ATTR(fsg_lun_opts_, removable); 3225 3226 static ssize_t fsg_lun_opts_cdrom_show(struct config_item *item, char *page) 3227 { 3228 return fsg_show_cdrom(to_fsg_lun_opts(item)->lun, page); 3229 } 3230 3231 static ssize_t fsg_lun_opts_cdrom_store(struct config_item *item, 3232 const char *page, size_t len) 3233 { 3234 struct fsg_lun_opts *opts = to_fsg_lun_opts(item); 3235 struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent); 3236 3237 return fsg_store_cdrom(opts->lun, &fsg_opts->common->filesem, page, 3238 len); 3239 } 3240 3241 CONFIGFS_ATTR(fsg_lun_opts_, cdrom); 3242 3243 static ssize_t fsg_lun_opts_nofua_show(struct config_item *item, char *page) 3244 { 3245 return fsg_show_nofua(to_fsg_lun_opts(item)->lun, page); 3246 } 3247 3248 static ssize_t fsg_lun_opts_nofua_store(struct config_item *item, 3249 const char *page, size_t len) 3250 { 3251 return fsg_store_nofua(to_fsg_lun_opts(item)->lun, page, len); 3252 } 3253 3254 CONFIGFS_ATTR(fsg_lun_opts_, nofua); 3255 3256 static ssize_t fsg_lun_opts_inquiry_string_show(struct config_item *item, 3257 char *page) 3258 { 3259 return fsg_show_inquiry_string(to_fsg_lun_opts(item)->lun, page); 3260 } 3261 3262 static ssize_t fsg_lun_opts_inquiry_string_store(struct config_item *item, 3263 const char *page, size_t len) 3264 { 3265 return fsg_store_inquiry_string(to_fsg_lun_opts(item)->lun, page, len); 3266 } 3267 3268 CONFIGFS_ATTR(fsg_lun_opts_, inquiry_string); 3269 3270 static ssize_t fsg_lun_opts_forced_eject_store(struct config_item *item, 3271 const char *page, size_t len) 3272 { 3273 struct fsg_lun_opts *opts = to_fsg_lun_opts(item); 3274 struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent); 3275 3276 return fsg_store_forced_eject(opts->lun, &fsg_opts->common->filesem, 3277 page, len); 3278 } 3279 3280 CONFIGFS_ATTR_WO(fsg_lun_opts_, forced_eject); 3281 3282 static struct configfs_attribute *fsg_lun_attrs[] = { 3283 &fsg_lun_opts_attr_file, 3284 &fsg_lun_opts_attr_ro, 3285 &fsg_lun_opts_attr_removable, 3286 &fsg_lun_opts_attr_cdrom, 3287 &fsg_lun_opts_attr_nofua, 3288 &fsg_lun_opts_attr_inquiry_string, 3289 &fsg_lun_opts_attr_forced_eject, 3290 NULL, 3291 }; 3292 3293 static const struct config_item_type fsg_lun_type = { 3294 .ct_item_ops = &fsg_lun_item_ops, 3295 .ct_attrs = fsg_lun_attrs, 3296 .ct_owner = THIS_MODULE, 3297 }; 3298 3299 static struct config_group *fsg_lun_make(struct config_group *group, 3300 const char *name) 3301 { 3302 struct fsg_lun_opts *opts; 3303 struct fsg_opts *fsg_opts; 3304 struct fsg_lun_config config; 3305 char *num_str; 3306 u8 num; 3307 int ret; 3308 3309 num_str = strchr(name, '.'); 3310 if (!num_str) { 3311 pr_err("Unable to locate . in LUN.NUMBER\n"); 3312 return ERR_PTR(-EINVAL); 3313 } 3314 num_str++; 3315 3316 ret = kstrtou8(num_str, 0, &num); 3317 if (ret) 3318 return ERR_PTR(ret); 3319 3320 fsg_opts = to_fsg_opts(&group->cg_item); 3321 if (num >= FSG_MAX_LUNS) 3322 return ERR_PTR(-ERANGE); 3323 num = array_index_nospec(num, FSG_MAX_LUNS); 3324 3325 mutex_lock(&fsg_opts->lock); 3326 if (fsg_opts->refcnt || fsg_opts->common->luns[num]) { 3327 ret = -EBUSY; 3328 goto out; 3329 } 3330 3331 opts = kzalloc_obj(*opts); 3332 if (!opts) { 3333 ret = -ENOMEM; 3334 goto out; 3335 } 3336 3337 memset(&config, 0, sizeof(config)); 3338 config.removable = true; 3339 3340 ret = fsg_common_create_lun(fsg_opts->common, &config, num, name, 3341 (const char **)&group->cg_item.ci_name); 3342 if (ret) { 3343 kfree(opts); 3344 goto out; 3345 } 3346 opts->lun = fsg_opts->common->luns[num]; 3347 opts->lun_id = num; 3348 mutex_unlock(&fsg_opts->lock); 3349 3350 config_group_init_type_name(&opts->group, name, &fsg_lun_type); 3351 3352 return &opts->group; 3353 out: 3354 mutex_unlock(&fsg_opts->lock); 3355 return ERR_PTR(ret); 3356 } 3357 3358 static void fsg_lun_drop(struct config_group *group, struct config_item *item) 3359 { 3360 struct fsg_lun_opts *lun_opts; 3361 struct fsg_opts *fsg_opts; 3362 3363 lun_opts = to_fsg_lun_opts(item); 3364 fsg_opts = to_fsg_opts(&group->cg_item); 3365 3366 mutex_lock(&fsg_opts->lock); 3367 if (fsg_opts->refcnt) { 3368 struct config_item *gadget; 3369 3370 gadget = group->cg_item.ci_parent->ci_parent; 3371 unregister_gadget_item(gadget); 3372 } 3373 3374 fsg_common_remove_lun(lun_opts->lun); 3375 fsg_opts->common->luns[lun_opts->lun_id] = NULL; 3376 lun_opts->lun_id = 0; 3377 mutex_unlock(&fsg_opts->lock); 3378 3379 config_item_put(item); 3380 } 3381 3382 static void fsg_attr_release(struct config_item *item) 3383 { 3384 struct fsg_opts *opts = to_fsg_opts(item); 3385 3386 usb_put_function_instance(&opts->func_inst); 3387 } 3388 3389 static const struct configfs_item_operations fsg_item_ops = { 3390 .release = fsg_attr_release, 3391 }; 3392 3393 static ssize_t fsg_opts_stall_show(struct config_item *item, char *page) 3394 { 3395 struct fsg_opts *opts = to_fsg_opts(item); 3396 int result; 3397 3398 mutex_lock(&opts->lock); 3399 result = sprintf(page, "%d", opts->common->can_stall); 3400 mutex_unlock(&opts->lock); 3401 3402 return result; 3403 } 3404 3405 static ssize_t fsg_opts_stall_store(struct config_item *item, const char *page, 3406 size_t len) 3407 { 3408 struct fsg_opts *opts = to_fsg_opts(item); 3409 int ret; 3410 bool stall; 3411 3412 mutex_lock(&opts->lock); 3413 3414 if (opts->refcnt) { 3415 mutex_unlock(&opts->lock); 3416 return -EBUSY; 3417 } 3418 3419 ret = kstrtobool(page, &stall); 3420 if (!ret) { 3421 opts->common->can_stall = stall; 3422 ret = len; 3423 } 3424 3425 mutex_unlock(&opts->lock); 3426 3427 return ret; 3428 } 3429 3430 CONFIGFS_ATTR(fsg_opts_, stall); 3431 3432 #ifdef CONFIG_USB_GADGET_DEBUG_FILES 3433 static ssize_t fsg_opts_num_buffers_show(struct config_item *item, char *page) 3434 { 3435 struct fsg_opts *opts = to_fsg_opts(item); 3436 int result; 3437 3438 mutex_lock(&opts->lock); 3439 result = sprintf(page, "%d", opts->common->fsg_num_buffers); 3440 mutex_unlock(&opts->lock); 3441 3442 return result; 3443 } 3444 3445 static ssize_t fsg_opts_num_buffers_store(struct config_item *item, 3446 const char *page, size_t len) 3447 { 3448 struct fsg_opts *opts = to_fsg_opts(item); 3449 int ret; 3450 u8 num; 3451 3452 mutex_lock(&opts->lock); 3453 if (opts->refcnt) { 3454 ret = -EBUSY; 3455 goto end; 3456 } 3457 ret = kstrtou8(page, 0, &num); 3458 if (ret) 3459 goto end; 3460 3461 ret = fsg_common_set_num_buffers(opts->common, num); 3462 if (ret) 3463 goto end; 3464 ret = len; 3465 3466 end: 3467 mutex_unlock(&opts->lock); 3468 return ret; 3469 } 3470 3471 CONFIGFS_ATTR(fsg_opts_, num_buffers); 3472 #endif 3473 3474 static struct configfs_attribute *fsg_attrs[] = { 3475 &fsg_opts_attr_stall, 3476 #ifdef CONFIG_USB_GADGET_DEBUG_FILES 3477 &fsg_opts_attr_num_buffers, 3478 #endif 3479 NULL, 3480 }; 3481 3482 static const struct configfs_group_operations fsg_group_ops = { 3483 .make_group = fsg_lun_make, 3484 .drop_item = fsg_lun_drop, 3485 }; 3486 3487 static const struct config_item_type fsg_func_type = { 3488 .ct_item_ops = &fsg_item_ops, 3489 .ct_group_ops = &fsg_group_ops, 3490 .ct_attrs = fsg_attrs, 3491 .ct_owner = THIS_MODULE, 3492 }; 3493 3494 static void fsg_free_inst(struct usb_function_instance *fi) 3495 { 3496 struct fsg_opts *opts; 3497 3498 opts = fsg_opts_from_func_inst(fi); 3499 fsg_common_release(opts->common); 3500 kfree(opts); 3501 } 3502 3503 static struct usb_function_instance *fsg_alloc_inst(void) 3504 { 3505 struct fsg_opts *opts; 3506 struct fsg_lun_config config; 3507 int rc; 3508 3509 opts = kzalloc_obj(*opts); 3510 if (!opts) 3511 return ERR_PTR(-ENOMEM); 3512 mutex_init(&opts->lock); 3513 opts->func_inst.free_func_inst = fsg_free_inst; 3514 opts->common = fsg_common_setup(opts->common); 3515 if (IS_ERR(opts->common)) { 3516 rc = PTR_ERR(opts->common); 3517 goto release_opts; 3518 } 3519 3520 rc = fsg_common_set_num_buffers(opts->common, 3521 CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS); 3522 if (rc) 3523 goto release_common; 3524 3525 memset(&config, 0, sizeof(config)); 3526 config.removable = true; 3527 rc = fsg_common_create_lun(opts->common, &config, 0, "lun.0", 3528 (const char **)&opts->func_inst.group.cg_item.ci_name); 3529 if (rc) 3530 goto release_buffers; 3531 3532 opts->lun0.lun = opts->common->luns[0]; 3533 opts->lun0.lun_id = 0; 3534 3535 config_group_init_type_name(&opts->func_inst.group, "", &fsg_func_type); 3536 3537 config_group_init_type_name(&opts->lun0.group, "lun.0", &fsg_lun_type); 3538 configfs_add_default_group(&opts->lun0.group, &opts->func_inst.group); 3539 3540 return &opts->func_inst; 3541 3542 release_buffers: 3543 fsg_common_free_buffers(opts->common); 3544 release_common: 3545 kfree(opts->common); 3546 release_opts: 3547 kfree(opts); 3548 return ERR_PTR(rc); 3549 } 3550 3551 static void fsg_free(struct usb_function *f) 3552 { 3553 struct fsg_dev *fsg; 3554 struct fsg_opts *opts; 3555 3556 fsg = container_of(f, struct fsg_dev, function); 3557 opts = container_of(f->fi, struct fsg_opts, func_inst); 3558 3559 mutex_lock(&opts->lock); 3560 opts->refcnt--; 3561 mutex_unlock(&opts->lock); 3562 3563 kfree(fsg); 3564 } 3565 3566 static struct usb_function *fsg_alloc(struct usb_function_instance *fi) 3567 { 3568 struct fsg_opts *opts = fsg_opts_from_func_inst(fi); 3569 struct fsg_common *common = opts->common; 3570 struct fsg_dev *fsg; 3571 3572 fsg = kzalloc_obj(*fsg); 3573 if (unlikely(!fsg)) 3574 return ERR_PTR(-ENOMEM); 3575 3576 mutex_lock(&opts->lock); 3577 opts->refcnt++; 3578 mutex_unlock(&opts->lock); 3579 3580 fsg->function.name = FSG_DRIVER_DESC; 3581 fsg->function.bind = fsg_bind; 3582 fsg->function.unbind = fsg_unbind; 3583 fsg->function.setup = fsg_setup; 3584 fsg->function.set_alt = fsg_set_alt; 3585 fsg->function.disable = fsg_disable; 3586 fsg->function.free_func = fsg_free; 3587 3588 fsg->common = common; 3589 3590 return &fsg->function; 3591 } 3592 3593 DECLARE_USB_FUNCTION_INIT(mass_storage, fsg_alloc_inst, fsg_alloc); 3594 MODULE_DESCRIPTION("Mass Storage USB Composite Function"); 3595 MODULE_LICENSE("GPL"); 3596 MODULE_AUTHOR("Michal Nazarewicz"); 3597 3598 /************************* Module parameters *************************/ 3599 3600 3601 void fsg_config_from_params(struct fsg_config *cfg, 3602 const struct fsg_module_parameters *params, 3603 unsigned int fsg_num_buffers) 3604 { 3605 struct fsg_lun_config *lun; 3606 unsigned i; 3607 3608 /* Configure LUNs */ 3609 cfg->nluns = 3610 min(params->luns ?: (params->file_count ?: 1u), 3611 (unsigned)FSG_MAX_LUNS); 3612 for (i = 0, lun = cfg->luns; i < cfg->nluns; ++i, ++lun) { 3613 lun->ro = !!params->ro[i]; 3614 lun->cdrom = !!params->cdrom[i]; 3615 lun->removable = !!params->removable[i]; 3616 lun->filename = 3617 params->file_count > i && params->file[i][0] 3618 ? params->file[i] 3619 : NULL; 3620 } 3621 3622 /* Let MSF use defaults */ 3623 cfg->vendor_name = NULL; 3624 cfg->product_name = NULL; 3625 3626 cfg->ops = NULL; 3627 cfg->private_data = NULL; 3628 3629 /* Finalise */ 3630 cfg->can_stall = params->stall; 3631 cfg->fsg_num_buffers = fsg_num_buffers; 3632 } 3633 EXPORT_SYMBOL_GPL(fsg_config_from_params); 3634