xref: /linux/drivers/net/wireless/broadcom/brcm80211/brcmsmac/aiutils.c (revision a1ff5a7d78a036d6c2178ee5acd6ba4946243800)
1 /*
2  * Copyright (c) 2010 Broadcom Corporation
3  *
4  * Permission to use, copy, modify, and/or distribute this software for any
5  * purpose with or without fee is hereby granted, provided that the above
6  * copyright notice and this permission notice appear in all copies.
7  *
8  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
11  * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
13  * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
14  * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
15  *
16  * File contents: support functions for PCI/PCIe
17  */
18 
19 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
20 
21 #include <linux/delay.h>
22 
23 #include <defs.h>
24 #include <chipcommon.h>
25 #include <brcmu_utils.h>
26 #include <brcm_hw_ids.h>
27 #include <soc.h>
28 #include "types.h"
29 #include "pub.h"
30 #include "pmu.h"
31 #include "aiutils.h"
32 
33 /* slow_clk_ctl */
34  /* slow clock source mask */
35 #define SCC_SS_MASK		0x00000007
36  /* source of slow clock is LPO */
37 #define	SCC_SS_LPO		0x00000000
38  /* source of slow clock is crystal */
39 #define	SCC_SS_XTAL		0x00000001
40  /* source of slow clock is PCI */
41 #define	SCC_SS_PCI		0x00000002
42  /* LPOFreqSel, 1: 160Khz, 0: 32KHz */
43 #define SCC_LF			0x00000200
44  /* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */
45 #define SCC_LP			0x00000400
46  /* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */
47 #define SCC_FS			0x00000800
48  /* IgnorePllOffReq, 1/0:
49   *  power logic ignores/honors PLL clock disable requests from core
50   */
51 #define SCC_IP			0x00001000
52  /* XtalControlEn, 1/0:
53   *  power logic does/doesn't disable crystal when appropriate
54   */
55 #define SCC_XC			0x00002000
56  /* XtalPU (RO), 1/0: crystal running/disabled */
57 #define SCC_XP			0x00004000
58  /* ClockDivider (SlowClk = 1/(4+divisor)) */
59 #define SCC_CD_MASK		0xffff0000
60 #define SCC_CD_SHIFT		16
61 
62 /* system_clk_ctl */
63  /* ILPen: Enable Idle Low Power */
64 #define	SYCC_IE			0x00000001
65  /* ALPen: Enable Active Low Power */
66 #define	SYCC_AE			0x00000002
67  /* ForcePLLOn */
68 #define	SYCC_FP			0x00000004
69  /* Force ALP (or HT if ALPen is not set */
70 #define	SYCC_AR			0x00000008
71  /* Force HT */
72 #define	SYCC_HR			0x00000010
73  /* ClkDiv  (ILP = 1/(4 * (divisor + 1)) */
74 #define SYCC_CD_MASK		0xffff0000
75 #define SYCC_CD_SHIFT		16
76 
77 #define CST4329_SPROM_OTP_SEL_MASK	0x00000003
78  /* OTP is powered up, use def. CIS, no SPROM */
79 #define CST4329_DEFCIS_SEL		0
80  /* OTP is powered up, SPROM is present */
81 #define CST4329_SPROM_SEL		1
82  /* OTP is powered up, no SPROM */
83 #define CST4329_OTP_SEL			2
84  /* OTP is powered down, SPROM is present */
85 #define CST4329_OTP_PWRDN		3
86 
87 #define CST4329_SPI_SDIO_MODE_MASK	0x00000004
88 #define CST4329_SPI_SDIO_MODE_SHIFT	2
89 
90 /* 43224 chip-specific ChipControl register bits */
91 #define CCTRL43224_GPIO_TOGGLE          0x8000
92  /* 12 mA drive strength */
93 #define CCTRL_43224A0_12MA_LED_DRIVE    0x00F000F0
94  /* 12 mA drive strength for later 43224s */
95 #define CCTRL_43224B0_12MA_LED_DRIVE    0xF0
96 
97 /* 43236 Chip specific ChipStatus register bits */
98 #define CST43236_SFLASH_MASK		0x00000040
99 #define CST43236_OTP_MASK		0x00000080
100 #define CST43236_HSIC_MASK		0x00000100	/* USB/HSIC */
101 #define CST43236_BP_CLK			0x00000200	/* 120/96Mbps */
102 #define CST43236_BOOT_MASK		0x00001800
103 #define CST43236_BOOT_SHIFT		11
104 #define CST43236_BOOT_FROM_SRAM		0 /* boot from SRAM, ARM in reset */
105 #define CST43236_BOOT_FROM_ROM		1 /* boot from ROM */
106 #define CST43236_BOOT_FROM_FLASH	2 /* boot from FLASH */
107 #define CST43236_BOOT_FROM_INVALID	3
108 
109 /* 4331 chip-specific ChipControl register bits */
110  /* 0 disable */
111 #define CCTRL4331_BT_COEXIST		(1<<0)
112  /* 0 SECI is disabled (JTAG functional) */
113 #define CCTRL4331_SECI			(1<<1)
114  /* 0 disable */
115 #define CCTRL4331_EXT_LNA		(1<<2)
116  /* sprom/gpio13-15 mux */
117 #define CCTRL4331_SPROM_GPIO13_15       (1<<3)
118  /* 0 ext pa disable, 1 ext pa enabled */
119 #define CCTRL4331_EXTPA_EN		(1<<4)
120  /* set drive out GPIO_CLK on sprom_cs pin */
121 #define CCTRL4331_GPIOCLK_ON_SPROMCS	(1<<5)
122  /* use sprom_cs pin as PCIE mdio interface */
123 #define CCTRL4331_PCIE_MDIO_ON_SPROMCS	(1<<6)
124  /* aband extpa will be at gpio2/5 and sprom_dout */
125 #define CCTRL4331_EXTPA_ON_GPIO2_5	(1<<7)
126  /* override core control on pipe_AuxClkEnable */
127 #define CCTRL4331_OVR_PIPEAUXCLKEN	(1<<8)
128  /* override core control on pipe_AuxPowerDown */
129 #define CCTRL4331_OVR_PIPEAUXPWRDOWN	(1<<9)
130  /* pcie_auxclkenable */
131 #define CCTRL4331_PCIE_AUXCLKEN		(1<<10)
132  /* pcie_pipe_pllpowerdown */
133 #define CCTRL4331_PCIE_PIPE_PLLDOWN	(1<<11)
134  /* enable bt_shd0 at gpio4 */
135 #define CCTRL4331_BT_SHD0_ON_GPIO4	(1<<16)
136  /* enable bt_shd1 at gpio5 */
137 #define CCTRL4331_BT_SHD1_ON_GPIO5	(1<<17)
138 
139 /* 4331 Chip specific ChipStatus register bits */
140  /* crystal frequency 20/40Mhz */
141 #define	CST4331_XTAL_FREQ		0x00000001
142 #define	CST4331_SPROM_PRESENT		0x00000002
143 #define	CST4331_OTP_PRESENT		0x00000004
144 #define	CST4331_LDO_RF			0x00000008
145 #define	CST4331_LDO_PAR			0x00000010
146 
147 /* 4319 chip-specific ChipStatus register bits */
148 #define	CST4319_SPI_CPULESSUSB		0x00000001
149 #define	CST4319_SPI_CLK_POL		0x00000002
150 #define	CST4319_SPI_CLK_PH		0x00000008
151  /* gpio [7:6], SDIO CIS selection */
152 #define	CST4319_SPROM_OTP_SEL_MASK	0x000000c0
153 #define	CST4319_SPROM_OTP_SEL_SHIFT	6
154  /* use default CIS, OTP is powered up */
155 #define	CST4319_DEFCIS_SEL		0x00000000
156  /* use SPROM, OTP is powered up */
157 #define	CST4319_SPROM_SEL		0x00000040
158  /* use OTP, OTP is powered up */
159 #define	CST4319_OTP_SEL			0x00000080
160  /* use SPROM, OTP is powered down */
161 #define	CST4319_OTP_PWRDN		0x000000c0
162  /* gpio [8], sdio/usb mode */
163 #define	CST4319_SDIO_USB_MODE		0x00000100
164 #define	CST4319_REMAP_SEL_MASK		0x00000600
165 #define	CST4319_ILPDIV_EN		0x00000800
166 #define	CST4319_XTAL_PD_POL		0x00001000
167 #define	CST4319_LPO_SEL			0x00002000
168 #define	CST4319_RES_INIT_MODE		0x0000c000
169  /* PALDO is configured with external PNP */
170 #define	CST4319_PALDO_EXTPNP		0x00010000
171 #define	CST4319_CBUCK_MODE_MASK		0x00060000
172 #define CST4319_CBUCK_MODE_BURST	0x00020000
173 #define CST4319_CBUCK_MODE_LPBURST	0x00060000
174 #define	CST4319_RCAL_VALID		0x01000000
175 #define	CST4319_RCAL_VALUE_MASK		0x3e000000
176 #define	CST4319_RCAL_VALUE_SHIFT	25
177 
178 /* 4336 chip-specific ChipStatus register bits */
179 #define	CST4336_SPI_MODE_MASK		0x00000001
180 #define	CST4336_SPROM_PRESENT		0x00000002
181 #define	CST4336_OTP_PRESENT		0x00000004
182 #define	CST4336_ARMREMAP_0		0x00000008
183 #define	CST4336_ILPDIV_EN_MASK		0x00000010
184 #define	CST4336_ILPDIV_EN_SHIFT		4
185 #define	CST4336_XTAL_PD_POL_MASK	0x00000020
186 #define	CST4336_XTAL_PD_POL_SHIFT	5
187 #define	CST4336_LPO_SEL_MASK		0x00000040
188 #define	CST4336_LPO_SEL_SHIFT		6
189 #define	CST4336_RES_INIT_MODE_MASK	0x00000180
190 #define	CST4336_RES_INIT_MODE_SHIFT	7
191 #define	CST4336_CBUCK_MODE_MASK		0x00000600
192 #define	CST4336_CBUCK_MODE_SHIFT	9
193 
194 /* 4313 chip-specific ChipStatus register bits */
195 #define	CST4313_SPROM_PRESENT			1
196 #define	CST4313_OTP_PRESENT			2
197 #define	CST4313_SPROM_OTP_SEL_MASK		0x00000002
198 #define	CST4313_SPROM_OTP_SEL_SHIFT		0
199 
200 /* 4313 Chip specific ChipControl register bits */
201  /* 12 mA drive strengh for later 4313 */
202 #define CCTRL_4313_12MA_LED_DRIVE    0x00000007
203 
204 /* Manufacturer Ids */
205 #define	MFGID_ARM		0x43b
206 #define	MFGID_BRCM		0x4bf
207 #define	MFGID_MIPS		0x4a7
208 
209 /* Enumeration ROM registers */
210 #define	ER_EROMENTRY		0x000
211 #define	ER_REMAPCONTROL		0xe00
212 #define	ER_REMAPSELECT		0xe04
213 #define	ER_MASTERSELECT		0xe10
214 #define	ER_ITCR			0xf00
215 #define	ER_ITIP			0xf04
216 
217 /* Erom entries */
218 #define	ER_TAG			0xe
219 #define	ER_TAG1			0x6
220 #define	ER_VALID		1
221 #define	ER_CI			0
222 #define	ER_MP			2
223 #define	ER_ADD			4
224 #define	ER_END			0xe
225 #define	ER_BAD			0xffffffff
226 
227 /* EROM CompIdentA */
228 #define	CIA_MFG_MASK		0xfff00000
229 #define	CIA_MFG_SHIFT		20
230 #define	CIA_CID_MASK		0x000fff00
231 #define	CIA_CID_SHIFT		8
232 #define	CIA_CCL_MASK		0x000000f0
233 #define	CIA_CCL_SHIFT		4
234 
235 /* EROM CompIdentB */
236 #define	CIB_REV_MASK		0xff000000
237 #define	CIB_REV_SHIFT		24
238 #define	CIB_NSW_MASK		0x00f80000
239 #define	CIB_NSW_SHIFT		19
240 #define	CIB_NMW_MASK		0x0007c000
241 #define	CIB_NMW_SHIFT		14
242 #define	CIB_NSP_MASK		0x00003e00
243 #define	CIB_NSP_SHIFT		9
244 #define	CIB_NMP_MASK		0x000001f0
245 #define	CIB_NMP_SHIFT		4
246 
247 /* EROM AddrDesc */
248 #define	AD_ADDR_MASK		0xfffff000
249 #define	AD_SP_MASK		0x00000f00
250 #define	AD_SP_SHIFT		8
251 #define	AD_ST_MASK		0x000000c0
252 #define	AD_ST_SHIFT		6
253 #define	AD_ST_SLAVE		0x00000000
254 #define	AD_ST_BRIDGE		0x00000040
255 #define	AD_ST_SWRAP		0x00000080
256 #define	AD_ST_MWRAP		0x000000c0
257 #define	AD_SZ_MASK		0x00000030
258 #define	AD_SZ_SHIFT		4
259 #define	AD_SZ_4K		0x00000000
260 #define	AD_SZ_8K		0x00000010
261 #define	AD_SZ_16K		0x00000020
262 #define	AD_SZ_SZD		0x00000030
263 #define	AD_AG32			0x00000008
264 #define	AD_ADDR_ALIGN		0x00000fff
265 #define	AD_SZ_BASE		0x00001000	/* 4KB */
266 
267 /* EROM SizeDesc */
268 #define	SD_SZ_MASK		0xfffff000
269 #define	SD_SG32			0x00000008
270 #define	SD_SZ_ALIGN		0x00000fff
271 
272 /* PCI config space bit 4 for 4306c0 slow clock source */
273 #define	PCI_CFG_GPIO_SCS	0x10
274 /* PCI config space GPIO 14 for Xtal power-up */
275 #define PCI_CFG_GPIO_XTAL	0x40
276 /* PCI config space GPIO 15 for PLL power-down */
277 #define PCI_CFG_GPIO_PLL	0x80
278 
279 /* power control defines */
280 #define PLL_DELAY		150	/* us pll on delay */
281 #define FREF_DELAY		200	/* us fref change delay */
282 #define	XTAL_ON_DELAY		1000	/* us crystal power-on delay */
283 
284 /* resetctrl */
285 #define	AIRC_RESET		1
286 
287 #define	NOREV		-1	/* Invalid rev */
288 
289 /* GPIO Based LED powersave defines */
290 #define DEFAULT_GPIO_ONTIME	10	/* Default: 10% on */
291 #define DEFAULT_GPIO_OFFTIME	90	/* Default: 10% on */
292 
293 /* When Srom support present, fields in sromcontrol */
294 #define	SRC_START		0x80000000
295 #define	SRC_BUSY		0x80000000
296 #define	SRC_OPCODE		0x60000000
297 #define	SRC_OP_READ		0x00000000
298 #define	SRC_OP_WRITE		0x20000000
299 #define	SRC_OP_WRDIS		0x40000000
300 #define	SRC_OP_WREN		0x60000000
301 #define	SRC_OTPSEL		0x00000010
302 #define	SRC_LOCK		0x00000008
303 #define	SRC_SIZE_MASK		0x00000006
304 #define	SRC_SIZE_1K		0x00000000
305 #define	SRC_SIZE_4K		0x00000002
306 #define	SRC_SIZE_16K		0x00000004
307 #define	SRC_SIZE_SHIFT		1
308 #define	SRC_PRESENT		0x00000001
309 
310 /* External PA enable mask */
311 #define GPIO_CTRL_EPA_EN_MASK 0x40
312 
313 #define DEFAULT_GPIOTIMERVAL \
314 	((DEFAULT_GPIO_ONTIME << GPIO_ONTIME_SHIFT) | DEFAULT_GPIO_OFFTIME)
315 
316 #define	BADIDX		(SI_MAXCORES + 1)
317 
318 #define	IS_SIM(chippkg)	\
319 	((chippkg == HDLSIM_PKG_ID) || (chippkg == HWSIM_PKG_ID))
320 
321 #define	GOODCOREADDR(x, b) \
322 	(((x) >= (b)) && ((x) < ((b) + SI_MAXCORES * SI_CORE_SIZE)) && \
323 		IS_ALIGNED((x), SI_CORE_SIZE))
324 
325 struct aidmp {
326 	u32 oobselina30;	/* 0x000 */
327 	u32 oobselina74;	/* 0x004 */
328 	u32 PAD[6];
329 	u32 oobselinb30;	/* 0x020 */
330 	u32 oobselinb74;	/* 0x024 */
331 	u32 PAD[6];
332 	u32 oobselinc30;	/* 0x040 */
333 	u32 oobselinc74;	/* 0x044 */
334 	u32 PAD[6];
335 	u32 oobselind30;	/* 0x060 */
336 	u32 oobselind74;	/* 0x064 */
337 	u32 PAD[38];
338 	u32 oobselouta30;	/* 0x100 */
339 	u32 oobselouta74;	/* 0x104 */
340 	u32 PAD[6];
341 	u32 oobseloutb30;	/* 0x120 */
342 	u32 oobseloutb74;	/* 0x124 */
343 	u32 PAD[6];
344 	u32 oobseloutc30;	/* 0x140 */
345 	u32 oobseloutc74;	/* 0x144 */
346 	u32 PAD[6];
347 	u32 oobseloutd30;	/* 0x160 */
348 	u32 oobseloutd74;	/* 0x164 */
349 	u32 PAD[38];
350 	u32 oobsynca;	/* 0x200 */
351 	u32 oobseloutaen;	/* 0x204 */
352 	u32 PAD[6];
353 	u32 oobsyncb;	/* 0x220 */
354 	u32 oobseloutben;	/* 0x224 */
355 	u32 PAD[6];
356 	u32 oobsyncc;	/* 0x240 */
357 	u32 oobseloutcen;	/* 0x244 */
358 	u32 PAD[6];
359 	u32 oobsyncd;	/* 0x260 */
360 	u32 oobseloutden;	/* 0x264 */
361 	u32 PAD[38];
362 	u32 oobaextwidth;	/* 0x300 */
363 	u32 oobainwidth;	/* 0x304 */
364 	u32 oobaoutwidth;	/* 0x308 */
365 	u32 PAD[5];
366 	u32 oobbextwidth;	/* 0x320 */
367 	u32 oobbinwidth;	/* 0x324 */
368 	u32 oobboutwidth;	/* 0x328 */
369 	u32 PAD[5];
370 	u32 oobcextwidth;	/* 0x340 */
371 	u32 oobcinwidth;	/* 0x344 */
372 	u32 oobcoutwidth;	/* 0x348 */
373 	u32 PAD[5];
374 	u32 oobdextwidth;	/* 0x360 */
375 	u32 oobdinwidth;	/* 0x364 */
376 	u32 oobdoutwidth;	/* 0x368 */
377 	u32 PAD[37];
378 	u32 ioctrlset;	/* 0x400 */
379 	u32 ioctrlclear;	/* 0x404 */
380 	u32 ioctrl;		/* 0x408 */
381 	u32 PAD[61];
382 	u32 iostatus;	/* 0x500 */
383 	u32 PAD[127];
384 	u32 ioctrlwidth;	/* 0x700 */
385 	u32 iostatuswidth;	/* 0x704 */
386 	u32 PAD[62];
387 	u32 resetctrl;	/* 0x800 */
388 	u32 resetstatus;	/* 0x804 */
389 	u32 resetreadid;	/* 0x808 */
390 	u32 resetwriteid;	/* 0x80c */
391 	u32 PAD[60];
392 	u32 errlogctrl;	/* 0x900 */
393 	u32 errlogdone;	/* 0x904 */
394 	u32 errlogstatus;	/* 0x908 */
395 	u32 errlogaddrlo;	/* 0x90c */
396 	u32 errlogaddrhi;	/* 0x910 */
397 	u32 errlogid;	/* 0x914 */
398 	u32 errloguser;	/* 0x918 */
399 	u32 errlogflags;	/* 0x91c */
400 	u32 PAD[56];
401 	u32 intstatus;	/* 0xa00 */
402 	u32 PAD[127];
403 	u32 config;		/* 0xe00 */
404 	u32 PAD[63];
405 	u32 itcr;		/* 0xf00 */
406 	u32 PAD[3];
407 	u32 itipooba;	/* 0xf10 */
408 	u32 itipoobb;	/* 0xf14 */
409 	u32 itipoobc;	/* 0xf18 */
410 	u32 itipoobd;	/* 0xf1c */
411 	u32 PAD[4];
412 	u32 itipoobaout;	/* 0xf30 */
413 	u32 itipoobbout;	/* 0xf34 */
414 	u32 itipoobcout;	/* 0xf38 */
415 	u32 itipoobdout;	/* 0xf3c */
416 	u32 PAD[4];
417 	u32 itopooba;	/* 0xf50 */
418 	u32 itopoobb;	/* 0xf54 */
419 	u32 itopoobc;	/* 0xf58 */
420 	u32 itopoobd;	/* 0xf5c */
421 	u32 PAD[4];
422 	u32 itopoobain;	/* 0xf70 */
423 	u32 itopoobbin;	/* 0xf74 */
424 	u32 itopoobcin;	/* 0xf78 */
425 	u32 itopoobdin;	/* 0xf7c */
426 	u32 PAD[4];
427 	u32 itopreset;	/* 0xf90 */
428 	u32 PAD[15];
429 	u32 peripherialid4;	/* 0xfd0 */
430 	u32 peripherialid5;	/* 0xfd4 */
431 	u32 peripherialid6;	/* 0xfd8 */
432 	u32 peripherialid7;	/* 0xfdc */
433 	u32 peripherialid0;	/* 0xfe0 */
434 	u32 peripherialid1;	/* 0xfe4 */
435 	u32 peripherialid2;	/* 0xfe8 */
436 	u32 peripherialid3;	/* 0xfec */
437 	u32 componentid0;	/* 0xff0 */
438 	u32 componentid1;	/* 0xff4 */
439 	u32 componentid2;	/* 0xff8 */
440 	u32 componentid3;	/* 0xffc */
441 };
442 
443 static bool
ai_buscore_setup(struct si_info * sii,struct bcma_device * cc)444 ai_buscore_setup(struct si_info *sii, struct bcma_device *cc)
445 {
446 	/* no cores found, bail out */
447 	if (cc->bus->nr_cores == 0)
448 		return false;
449 
450 	/* get chipcommon rev */
451 	sii->pub.ccrev = cc->id.rev;
452 
453 	/* get chipcommon chipstatus */
454 	sii->chipst = bcma_read32(cc, CHIPCREGOFFS(chipstatus));
455 
456 	/* get chipcommon capabilites */
457 	sii->pub.cccaps = bcma_read32(cc, CHIPCREGOFFS(capabilities));
458 
459 	/* get pmu rev and caps */
460 	if (ai_get_cccaps(&sii->pub) & CC_CAP_PMU) {
461 		sii->pub.pmucaps = bcma_read32(cc,
462 					       CHIPCREGOFFS(pmucapabilities));
463 		sii->pub.pmurev = sii->pub.pmucaps & PCAP_REV_MASK;
464 	}
465 
466 	return true;
467 }
468 
ai_doattach(struct si_info * sii,struct bcma_bus * pbus)469 static struct si_info *ai_doattach(struct si_info *sii,
470 				   struct bcma_bus *pbus)
471 {
472 	struct si_pub *sih = &sii->pub;
473 	struct bcma_device *cc;
474 
475 	sii->icbus = pbus;
476 	sii->pcibus = pbus->host_pci;
477 
478 	/* switch to Chipcommon core */
479 	cc = pbus->drv_cc.core;
480 
481 	sih->chip = pbus->chipinfo.id;
482 	sih->chiprev = pbus->chipinfo.rev;
483 	sih->chippkg = pbus->chipinfo.pkg;
484 	sih->boardvendor = pbus->boardinfo.vendor;
485 	sih->boardtype = pbus->boardinfo.type;
486 
487 	if (!ai_buscore_setup(sii, cc))
488 		goto exit;
489 
490 	/* === NVRAM, clock is ready === */
491 	bcma_write32(cc, CHIPCREGOFFS(gpiopullup), 0);
492 	bcma_write32(cc, CHIPCREGOFFS(gpiopulldown), 0);
493 
494 	/* PMU specific initializations */
495 	if (ai_get_cccaps(sih) & CC_CAP_PMU) {
496 		(void)si_pmu_measure_alpclk(sih);
497 	}
498 
499 	return sii;
500 
501  exit:
502 
503 	return NULL;
504 }
505 
506 /*
507  * Allocate a si handle and do the attach.
508  */
509 struct si_pub *
ai_attach(struct bcma_bus * pbus)510 ai_attach(struct bcma_bus *pbus)
511 {
512 	struct si_info *sii;
513 
514 	/* alloc struct si_info */
515 	sii = kzalloc(sizeof(*sii), GFP_ATOMIC);
516 	if (sii == NULL)
517 		return NULL;
518 
519 	if (ai_doattach(sii, pbus) == NULL) {
520 		kfree(sii);
521 		return NULL;
522 	}
523 
524 	return (struct si_pub *) sii;
525 }
526 
527 /* may be called with core in reset */
ai_detach(struct si_pub * sih)528 void ai_detach(struct si_pub *sih)
529 {
530 	struct si_info *sii;
531 
532 	sii = container_of(sih, struct si_info, pub);
533 
534 	kfree(sii);
535 }
536 
537 /*
538  * read/modify chipcommon core register.
539  */
ai_cc_reg(struct si_pub * sih,uint regoff,u32 mask,u32 val)540 uint ai_cc_reg(struct si_pub *sih, uint regoff, u32 mask, u32 val)
541 {
542 	struct bcma_device *cc;
543 	u32 w;
544 	struct si_info *sii;
545 
546 	sii = container_of(sih, struct si_info, pub);
547 	cc = sii->icbus->drv_cc.core;
548 
549 	/* mask and set */
550 	if (mask || val)
551 		bcma_maskset32(cc, regoff, ~mask, val);
552 
553 	/* readback */
554 	w = bcma_read32(cc, regoff);
555 
556 	return w;
557 }
558 
559 /* return the slow clock source - LPO, XTAL, or PCI */
ai_slowclk_src(struct si_pub * sih,struct bcma_device * cc)560 static uint ai_slowclk_src(struct si_pub *sih, struct bcma_device *cc)
561 {
562 	return SCC_SS_XTAL;
563 }
564 
565 /*
566 * return the ILP (slowclock) min or max frequency
567 * precondition: we've established the chip has dynamic clk control
568 */
ai_slowclk_freq(struct si_pub * sih,bool max_freq,struct bcma_device * cc)569 static uint ai_slowclk_freq(struct si_pub *sih, bool max_freq,
570 			    struct bcma_device *cc)
571 {
572 	uint div;
573 
574 	/* Chipc rev 10 is InstaClock */
575 	div = bcma_read32(cc, CHIPCREGOFFS(system_clk_ctl));
576 	div = 4 * ((div >> SYCC_CD_SHIFT) + 1);
577 	return max_freq ? XTALMAXFREQ : (XTALMINFREQ / div);
578 }
579 
580 static void
ai_clkctl_setdelay(struct si_pub * sih,struct bcma_device * cc)581 ai_clkctl_setdelay(struct si_pub *sih, struct bcma_device *cc)
582 {
583 	uint slowmaxfreq, pll_delay, slowclk;
584 	uint pll_on_delay, fref_sel_delay;
585 
586 	pll_delay = PLL_DELAY;
587 
588 	/*
589 	 * If the slow clock is not sourced by the xtal then
590 	 * add the xtal_on_delay since the xtal will also be
591 	 * powered down by dynamic clk control logic.
592 	 */
593 
594 	slowclk = ai_slowclk_src(sih, cc);
595 	if (slowclk != SCC_SS_XTAL)
596 		pll_delay += XTAL_ON_DELAY;
597 
598 	/* Starting with 4318 it is ILP that is used for the delays */
599 	slowmaxfreq =
600 	    ai_slowclk_freq(sih, false, cc);
601 
602 	pll_on_delay = ((slowmaxfreq * pll_delay) + 999999) / 1000000;
603 	fref_sel_delay = ((slowmaxfreq * FREF_DELAY) + 999999) / 1000000;
604 
605 	bcma_write32(cc, CHIPCREGOFFS(pll_on_delay), pll_on_delay);
606 	bcma_write32(cc, CHIPCREGOFFS(fref_sel_delay), fref_sel_delay);
607 }
608 
609 /* initialize power control delay registers */
ai_clkctl_init(struct si_pub * sih)610 void ai_clkctl_init(struct si_pub *sih)
611 {
612 	struct si_info *sii = container_of(sih, struct si_info, pub);
613 	struct bcma_device *cc;
614 
615 	if (!(ai_get_cccaps(sih) & CC_CAP_PWR_CTL))
616 		return;
617 
618 	cc = sii->icbus->drv_cc.core;
619 	if (cc == NULL)
620 		return;
621 
622 	/* set all Instaclk chip ILP to 1 MHz */
623 	bcma_maskset32(cc, CHIPCREGOFFS(system_clk_ctl), SYCC_CD_MASK,
624 		       (ILP_DIV_1MHZ << SYCC_CD_SHIFT));
625 
626 	ai_clkctl_setdelay(sih, cc);
627 }
628 
629 /*
630  * return the value suitable for writing to the
631  * dot11 core FAST_PWRUP_DELAY register
632  */
ai_clkctl_fast_pwrup_delay(struct si_pub * sih)633 u16 ai_clkctl_fast_pwrup_delay(struct si_pub *sih)
634 {
635 	struct si_info *sii;
636 	struct bcma_device *cc;
637 	uint slowminfreq;
638 	u16 fpdelay;
639 
640 	sii = container_of(sih, struct si_info, pub);
641 	if (ai_get_cccaps(sih) & CC_CAP_PMU) {
642 		fpdelay = si_pmu_fast_pwrup_delay(sih);
643 		return fpdelay;
644 	}
645 
646 	if (!(ai_get_cccaps(sih) & CC_CAP_PWR_CTL))
647 		return 0;
648 
649 	fpdelay = 0;
650 	cc = sii->icbus->drv_cc.core;
651 	if (cc) {
652 		slowminfreq = ai_slowclk_freq(sih, false, cc);
653 		fpdelay = (((bcma_read32(cc, CHIPCREGOFFS(pll_on_delay)) + 2)
654 			    * 1000000) + (slowminfreq - 1)) / slowminfreq;
655 	}
656 	return fpdelay;
657 }
658 
659 /*
660  *  clock control policy function throught chipcommon
661  *
662  *    set dynamic clk control mode (forceslow, forcefast, dynamic)
663  *    returns true if we are forcing fast clock
664  *    this is a wrapper over the next internal function
665  *      to allow flexible policy settings for outside caller
666  */
ai_clkctl_cc(struct si_pub * sih,enum bcma_clkmode mode)667 bool ai_clkctl_cc(struct si_pub *sih, enum bcma_clkmode mode)
668 {
669 	struct si_info *sii;
670 	struct bcma_device *cc;
671 
672 	sii = container_of(sih, struct si_info, pub);
673 
674 	cc = sii->icbus->drv_cc.core;
675 	bcma_core_set_clockmode(cc, mode);
676 	return mode == BCMA_CLKMODE_FAST;
677 }
678 
679 /* Enable BT-COEX & Ex-PA for 4313 */
ai_epa_4313war(struct si_pub * sih)680 void ai_epa_4313war(struct si_pub *sih)
681 {
682 	struct si_info *sii = container_of(sih, struct si_info, pub);
683 	struct bcma_device *cc;
684 
685 	cc = sii->icbus->drv_cc.core;
686 
687 	/* EPA Fix */
688 	bcma_set32(cc, CHIPCREGOFFS(gpiocontrol), GPIO_CTRL_EPA_EN_MASK);
689 }
690 
691 /* check if the device is removed */
ai_deviceremoved(struct si_pub * sih)692 bool ai_deviceremoved(struct si_pub *sih)
693 {
694 	u32 w = 0;
695 	struct si_info *sii;
696 
697 	sii = container_of(sih, struct si_info, pub);
698 
699 	if (sii->icbus->hosttype != BCMA_HOSTTYPE_PCI)
700 		return false;
701 
702 	pci_read_config_dword(sii->pcibus, PCI_VENDOR_ID, &w);
703 	if ((w & 0xFFFF) != PCI_VENDOR_ID_BROADCOM)
704 		return true;
705 
706 	return false;
707 }
708