| /linux/drivers/iio/adc/ |
| H A D | ad7944.c | 252 return dev_err_probe(dev, -EINVAL, in ad7944_chain_mode_init_msg()
260 return dev_err_probe(dev, -EINVAL, in ad7944_chain_mode_init_msg()
313 return dev_err_probe(dev, ret, "failed to prepare offload msg\n"); in ad7944_3wire_cs_mode_init_offload_msg()
612 return dev_err_probe(dev, -EINVAL, in ad7944_chain_mode_alloc()
660 return dev_err_probe(dev, -EINVAL, "no chip info\n"); in ad7944_probe()
675 return dev_err_probe(dev, ret, in ad7944_probe()
685 return dev_err_probe(dev, -EINVAL, in ad7944_probe()
693 return dev_err_probe(dev, ret, in ad7944_probe()
706 return dev_err_probe(dev, ret, "failed to get REF voltage\n"); in ad7944_probe()
712 return dev_err_probe(dev, ret, "failed to get REFIN voltage\n"); in ad7944_probe()
[all …]
|
| H A D | fsl-imx25-gcq.c | 191 return dev_err_probe(dev, PTR_ERR(priv->vref[refp]), in mx25_gcq_ext_regulator_setup()
224 return dev_err_probe(dev, ret, in mx25_gcq_setup_cfgs()
228 return dev_err_probe(dev, -EINVAL, in mx25_gcq_setup_cfgs()
250 return dev_err_probe(dev, -EINVAL, in mx25_gcq_setup_cfgs()
262 return dev_err_probe(dev, -EINVAL, in mx25_gcq_setup_cfgs()
266 return dev_err_probe(dev, -EINVAL, in mx25_gcq_setup_cfgs()
316 return dev_err_probe(dev, PTR_ERR(priv->regs), in mx25_gcq_probe()
344 return dev_err_probe(dev, ret, "Failed to enable clock\n"); in mx25_gcq_probe()
359 return dev_err_probe(dev, ret, "Failed requesting IRQ\n"); in mx25_gcq_probe()
368 return dev_err_probe(dev, ret, "Failed to register iio device\n"); in mx25_gcq_probe()
|
| H A D | nct7201.c | 346 return dev_err_probe(dev, err, "Failed to reset chip\n"); in nct7201_init_chip()
356 return dev_err_probe(dev, err, "Failed to read busy status\n"); in nct7201_init_chip()
358 return dev_err_probe(dev, -EIO, "Failed to power up after reset\n"); in nct7201_init_chip()
368 return dev_err_probe(dev, err, "Failed to enable channels\n"); in nct7201_init_chip()
373 return dev_err_probe(dev, err, in nct7201_init_chip()
380 return dev_err_probe(dev, err, "Failed to start monitoring\n"); in nct7201_init_chip()
427 return dev_err_probe(dev, PTR_ERR(chip->regmap), in nct7201_probe()
432 return dev_err_probe(dev, PTR_ERR(chip->regmap16), in nct7201_probe()
449 return dev_err_probe(dev, ret, in nct7201_probe()
457 return dev_err_probe(dev, ret, in nct7201_probe()
|
| /linux/drivers/phy/mediatek/ |
| H A D | phy-mtk-pcie.c | 144 return dev_err_probe(dev, ret, "Failed to read %s\n", efuse_id); in mtk_pcie_efuse_read_for_lane()
149 return dev_err_probe(dev, ret, "Failed to read %s\n", efuse_id); in mtk_pcie_efuse_read_for_lane()
154 return dev_err_probe(dev, ret, "Failed to read %s\n", efuse_id); in mtk_pcie_efuse_read_for_lane()
157 return dev_err_probe(dev, -EINVAL, in mtk_pcie_efuse_read_for_lane()
180 return dev_err_probe(dev, ret, "Failed to read glb_intr\n"); in mtk_pcie_read_efuse()
211 return dev_err_probe(dev, PTR_ERR(pcie_phy->sif_base), in mtk_pcie_phy_probe()
216 return dev_err_probe(dev, PTR_ERR(pcie_phy->phy), in mtk_pcie_phy_probe()
222 return dev_err_probe(dev, -EINVAL, "Failed to get phy data\n"); in mtk_pcie_phy_probe()
238 return dev_err_probe(dev, PTR_ERR(provider), in mtk_pcie_phy_probe()
|
| /linux/drivers/tty/serial/8250/ |
| H A D | 8250_dfl.c | 61 return dev_err_probe(dev, ret, "missing CLK_FRQ param\n"); in dfl_uart_get_params()
67 return dev_err_probe(dev, ret, "missing FIFO_LEN param\n"); in dfl_uart_get_params()
83 return dev_err_probe(dev, -EINVAL, "unsupported FIFO_LEN %llu\n", fifo_len); in dfl_uart_get_params()
88 return dev_err_probe(dev, ret, "missing REG_LAYOUT param\n"); in dfl_uart_get_params()
102 return dev_err_probe(dev, -EINVAL, "unsupported reg-width %u\n", reg_width); in dfl_uart_get_params()
122 return dev_err_probe(dev, ret, "failed uart feature walk\n"); in dfl_uart_probe()
133 return dev_err_probe(dev, dfluart->line, "unable to register 8250 port.\n"); in dfl_uart_probe()
|
| /linux/drivers/iio/dac/ |
| H A D | ad3552r-common.c | 165 return dev_err_probe(dev, voltage, in ad3552r_get_ref_voltage()
199 dev_err_probe(dev, -EINVAL, in ad3552r_get_drive_strength()
220 return dev_err_probe(dev, -EINVAL, in ad3552r_get_custom_gain()
225 return dev_err_probe(dev, err, in ad3552r_get_custom_gain()
231 return dev_err_probe(dev, err, in ad3552r_get_custom_gain()
237 return dev_err_probe(dev, err, in ad3552r_get_custom_gain()
243 return dev_err_probe(dev, err, in ad3552r_get_custom_gain()
279 return dev_err_probe(dev, ret, in ad3552r_get_output_range()
284 return dev_err_probe(dev, ret, in ad3552r_get_output_range()
|
| /linux/drivers/bus/ |
| H A D | qcom-ssc-block-bus.c | 271 return dev_err_probe(&pdev->dev, PTR_ERR(data->reg_mpm_sscaon_config0), in qcom_ssc_block_bus_probe()
277 return dev_err_probe(&pdev->dev, PTR_ERR(data->reg_mpm_sscaon_config1), in qcom_ssc_block_bus_probe()
283 return dev_err_probe(&pdev->dev, PTR_ERR(data->ssc_bcr), in qcom_ssc_block_bus_probe()
288 return dev_err_probe(&pdev->dev, PTR_ERR(data->ssc_reset), in qcom_ssc_block_bus_probe()
294 return dev_err_probe(&pdev->dev, PTR_ERR(data->xo_clk), in qcom_ssc_block_bus_probe()
299 return dev_err_probe(&pdev->dev, PTR_ERR(data->aggre2_clk), in qcom_ssc_block_bus_probe()
304 return dev_err_probe(&pdev->dev, PTR_ERR(data->gcc_im_sleep_clk), in qcom_ssc_block_bus_probe()
309 return dev_err_probe(&pdev->dev, PTR_ERR(data->aggre2_north_clk), in qcom_ssc_block_bus_probe()
314 return dev_err_probe(&pdev->dev, PTR_ERR(data->ssc_xo_clk), in qcom_ssc_block_bus_probe()
319 return dev_err_probe(&pdev->dev, PTR_ERR(data->ssc_ahbs_clk), in qcom_ssc_block_bus_probe()
[all …]
|
| /linux/drivers/net/mdio/ |
| H A D | mdio-mux-mmioreg.c | 113 return dev_err_probe(&pdev->dev, ret, in mdio_mux_mmioreg_probe()
121 return dev_err_probe(&pdev->dev, -EINVAL, in mdio_mux_mmioreg_probe()
126 return dev_err_probe(&pdev->dev, -ENODEV, in mdio_mux_mmioreg_probe()
129 return dev_err_probe(&pdev->dev, -EINVAL, in mdio_mux_mmioreg_probe()
141 return dev_err_probe(&pdev->dev, -ENODEV, in mdio_mux_mmioreg_probe()
145 return dev_err_probe(&pdev->dev, -ENODEV, in mdio_mux_mmioreg_probe()
154 return dev_err_probe(&pdev->dev, ret, in mdio_mux_mmioreg_probe()
|
| /linux/drivers/pwm/ |
| H A D | pwm-xilinx.c | 221 return dev_err_probe(dev, ret, "could not read #pwm-cells\n"); in xilinx_pwm_probe()
235 return dev_err_probe(dev, PTR_ERR(priv->map), in xilinx_pwm_probe()
240 return dev_err_probe(dev, ret, in xilinx_pwm_probe()
244 return dev_err_probe(dev, -EINVAL, in xilinx_pwm_probe()
251 return dev_err_probe(dev, ret, in xilinx_pwm_probe()
255 return dev_err_probe(dev, -EINVAL, in xilinx_pwm_probe()
267 return dev_err_probe(dev, PTR_ERR(priv->clk), in xilinx_pwm_probe()
272 return dev_err_probe(dev, ret, in xilinx_pwm_probe()
278 return dev_err_probe(dev, ret, "Could not register PWM chip\n"); in xilinx_pwm_probe()
|
| H A D | pwm-axi-pwmgen.c | 216 return dev_err_probe(dev, -ENODEV, in axi_pwmgen_setup()
225 return dev_err_probe(dev, -ENODEV, "Unsupported peripheral version %u.%u.%u\n", in axi_pwmgen_setup()
270 return dev_err_probe(dev, PTR_ERR(regmap), in axi_pwmgen_probe()
290 return dev_err_probe(dev, PTR_ERR(axi_clk), "failed to get axi clock\n"); in axi_pwmgen_probe()
294 return dev_err_probe(dev, PTR_ERR(clk), "failed to get ext clock\n"); in axi_pwmgen_probe()
306 return dev_err_probe(dev, ret, "failed to get exclusive rate\n"); in axi_pwmgen_probe()
310 return dev_err_probe(dev, -EINVAL, in axi_pwmgen_probe()
318 return dev_err_probe(dev, ret, "could not add PWM chip\n"); in axi_pwmgen_probe()
|
| /linux/drivers/platform/x86/ |
| H A D | meegopad_anx7428.c | 103 return dev_err_probe(dev, PTR_ERR(gpio), "getting enable GPIO\n"); in anx7428_probe()
109 return dev_err_probe(dev, PTR_ERR(gpio), "getting reset GPIO\n"); in anx7428_probe()
116 return dev_err_probe(dev, ret, in anx7428_probe()
122 return dev_err_probe(dev, ret, "reading vendor-id register\n"); in anx7428_probe()
127 return dev_err_probe(dev, ret, "reading device-id register\n"); in anx7428_probe()
|
| /linux/drivers/usb/typec/mux/ |
| H A D | it5205.c | 187 return dev_err_probe(dev, ret, "Failed to get regulator\n"); in it5205_probe()
193 return dev_err_probe(dev, PTR_ERR(it->regmap), in it5205_probe()
202 return dev_err_probe(dev, ret, "Failed to set power on\n"); in it5205_probe()
214 return dev_err_probe(dev, -EINVAL, in it5205_probe()
220 return dev_err_probe(dev, ret, "Cannot set mode to USB\n"); in it5205_probe()
228 return dev_err_probe(dev, PTR_ERR(it->sw), in it5205_probe()
238 return dev_err_probe(dev, PTR_ERR(it->mux), in it5205_probe()
253 return dev_err_probe(dev, ret, "Failed to request irq\n"); in it5205_probe()
|
| H A D | ps883x.c | 300 return dev_err_probe(dev, PTR_ERR(retimer->vdd_supply), in ps883x_get_vregs()
305 return dev_err_probe(dev, PTR_ERR(retimer->vdd33_supply), in ps883x_get_vregs()
310 return dev_err_probe(dev, PTR_ERR(retimer->vdd33_cap_supply), in ps883x_get_vregs()
315 return dev_err_probe(dev, PTR_ERR(retimer->vddat_supply), in ps883x_get_vregs()
320 return dev_err_probe(dev, PTR_ERR(retimer->vddar_supply), in ps883x_get_vregs()
325 return dev_err_probe(dev, PTR_ERR(retimer->vddio_supply), in ps883x_get_vregs()
356 return dev_err_probe(dev, PTR_ERR(retimer->regmap), in ps883x_retimer_probe()
365 return dev_err_probe(dev, PTR_ERR(retimer->xo_clk), in ps883x_retimer_probe()
370 return dev_err_probe(dev, PTR_ERR(retimer->reset_gpio), in ps883x_retimer_probe()
375 return dev_err_probe(dev, PTR_ERR(retimer->typec_switch), in ps883x_retimer_probe()
[all …]
|
| /linux/drivers/hwmon/pmbus/ |
| H A D | ltc4286.c | 78 return dev_err_probe(&client->dev, ret, in ltc4286_probe()
88 return dev_err_probe(&client->dev, -ENODEV, in ltc4286_probe()
94 return dev_err_probe(&client->dev, ret, in ltc4286_probe()
103 return dev_err_probe(&client->dev, -ENODEV, in ltc4286_probe()
125 return dev_err_probe(&client->dev, vrange_oval, in ltc4286_probe()
147 return dev_err_probe(&client->dev, ret, in ltc4286_probe()
|
| /linux/drivers/ufs/host/ |
| H A D | ufs-rockchip.c | 153 return dev_err_probe(dev, PTR_ERR(host->ufs_sys_ctrl), in ufs_rockchip_common_init()
158 return dev_err_probe(dev, PTR_ERR(host->ufs_phy_ctrl), in ufs_rockchip_common_init()
163 return dev_err_probe(dev, PTR_ERR(host->mphy_base), in ufs_rockchip_common_init()
168 return dev_err_probe(dev, PTR_ERR(host->rst), in ufs_rockchip_common_init()
175 return dev_err_probe(dev, PTR_ERR(host->ref_out_clk), in ufs_rockchip_common_init()
180 return dev_err_probe(dev, PTR_ERR(host->rst_gpio), in ufs_rockchip_common_init()
185 return dev_err_probe(dev, err, "failed to enable clocks\n"); in ufs_rockchip_common_init()
215 return dev_err_probe(dev, ret, "ufs common init fail\n"); in ufs_rockchip_rk3576_init()
255 return dev_err_probe(dev, -ENODATA, "ufs_hba_variant_ops not defined.\n"); in ufs_rockchip_probe()
259 return dev_err_probe(dev, err, "ufshcd_pltfrm_init failed\n"); in ufs_rockchip_probe()
|
| /linux/drivers/i2c/muxes/ |
| H A D | i2c-mux-mule.c | 69 return dev_err_probe(mux_dev, -ENODEV, in mule_i2c_mux_probe()
81 return dev_err_probe(mux_dev, ret, in mule_i2c_mux_probe()
86 return dev_err_probe(mux_dev, ret, in mule_i2c_mux_probe()
93 return dev_err_probe(mux_dev, ret, in mule_i2c_mux_probe()
102 return dev_err_probe(mux_dev, ret, in mule_i2c_mux_probe()
|
| /linux/drivers/input/keyboard/ |
| H A D | adp5585-keys.c | 65 return dev_err_probe(kpad->dev, -EINVAL, in adp5585_keys_validate_events()
115 return dev_err_probe(dev, -EINVAL, in adp5585_keys_parse_fw()
140 return dev_err_probe(dev, -EINVAL, in adp5585_keys_parse_fw()
145 return dev_err_probe(dev, -EBUSY, in adp5585_keys_parse_fw()
162 return dev_err_probe(dev, -EINVAL, in adp5585_keys_parse_fw()
167 return dev_err_probe(dev, -EINVAL, in adp5585_keys_parse_fw()
282 return dev_err_probe(dev, -EINVAL, in adp5585_keys_probe()
297 return dev_err_probe(dev, error, "Failed to read device ID\n"); in adp5585_keys_probe()
333 return dev_err_probe(dev, error, in adp5585_keys_probe()
|
| /linux/drivers/mfd/ |
| H A D | max77714.c | 88 return dev_err_probe(dev, err, "Failed to configure the external oscillator\n"); in max77714_setup_xosc()
92 return dev_err_probe(dev, err, "Failed to read external oscillator status\n"); in max77714_setup_xosc()
113 return dev_err_probe(dev, PTR_ERR(regmap), in max77714_probe()
124 return dev_err_probe(dev, err, "Failed to add PMIC IRQ chip\n"); in max77714_probe()
130 return dev_err_probe(dev, err, "Failed to register child devices\n"); in max77714_probe()
|
| /linux/drivers/clk/qcom/ |
| H A D | apcs-sdx55.c | 84 return dev_err_probe(dev, PTR_ERR(a7cc->pclk), in qcom_apcs_sdx55_clk_probe()
90 return dev_err_probe(dev, ret, in qcom_apcs_sdx55_clk_probe()
95 dev_err_probe(dev, ret, "Failed to register regmap clock\n"); in qcom_apcs_sdx55_clk_probe()
102 dev_err_probe(dev, ret, "Failed to add clock provider\n"); in qcom_apcs_sdx55_clk_probe()
116 dev_err_probe(dev, ret, "can't get PM domain: %d\n", ret); in qcom_apcs_sdx55_clk_probe()
|
| /linux/sound/soc/sof/imx/ |
| H A D | imx-common.c | 291 return dev_err_probe(sdev->dev, blk_type, in imx_parse_ioremap_memory()
299 return dev_err_probe(sdev->dev, -ENODEV, in imx_parse_ioremap_memory()
308 return dev_err_probe(sdev->dev, ret, in imx_parse_ioremap_memory()
316 return dev_err_probe(sdev->dev, in imx_parse_ioremap_memory()
361 return dev_err_probe(sdev->dev, PTR_ERR(common->ipc_dev), in imx_probe()
371 return dev_err_probe(sdev->dev, ret, in imx_probe()
385 return dev_err_probe(sdev->dev, -EPROBE_DEFER, in imx_probe()
390 return dev_err_probe(sdev->dev, ret, in imx_probe()
397 return dev_err_probe(sdev->dev, ret, "failed to attach PDs\n"); in imx_probe()
402 return dev_err_probe(sde in imx_probe()
[all...] |
| /linux/drivers/misc/ |
| H A D | tps6594-esm.c | 50 return dev_err_probe(dev, ret, in tps6594_esm_probe()
53 return dev_err_probe(dev, -ENODEV, in tps6594_esm_probe()
65 return dev_err_probe(dev, ret, "Failed to request irq\n"); in tps6594_esm_probe()
71 return dev_err_probe(dev, ret, "Failed to configure ESM\n"); in tps6594_esm_probe()
76 return dev_err_probe(dev, ret, "Failed to start ESM\n"); in tps6594_esm_probe()
|
| /linux/drivers/usb/dwc3/ |
| H A D | dwc3-generic-plat.c | 95 return dev_err_probe(dev, PTR_ERR(dwc3g->resets), "failed to get resets\n"); in dwc3_generic_probe()
99 return dev_err_probe(dev, ret, "failed to assert resets\n"); in dwc3_generic_probe()
106 return dev_err_probe(dev, ret, "failed to deassert resets\n"); in dwc3_generic_probe()
114 return dev_err_probe(dev, ret, "failed to get clocks\n"); in dwc3_generic_probe()
132 return dev_err_probe(dev, ret, in dwc3_generic_probe()
139 return dev_err_probe(dev, ret, "failed to register DWC3 Core\n"); in dwc3_generic_probe()
|
| /linux/sound/soc/loongson/ |
| H A D | loongson_i2s_pci.c | 106 return dev_err_probe(dev, PTR_ERR(i2s->regmap), "regmap_init_mmio failed\n"); in loongson_i2s_pci_probe()
119 return dev_err_probe(dev, tx_data->irq, "dma tx irq invalid\n"); in loongson_i2s_pci_probe()
123 return dev_err_probe(dev, rx_data->irq, "dma rx irq invalid\n"); in loongson_i2s_pci_probe()
127 return dev_err_probe(dev, ret, "clock-frequency property invalid\n"); in loongson_i2s_pci_probe()
139 return dev_err_probe(dev, ret, "register DAI failed\n"); in loongson_i2s_pci_probe()
|
| /linux/drivers/clk/imx/ |
| H A D | clk-imx8ulp-sim-lpav.c | 93 return dev_err_probe(&pdev->dev, PTR_ERR(base), in clk_imx8ulp_sim_lpav_probe()
102 return dev_err_probe(&pdev->dev, PTR_ERR(regmap), in clk_imx8ulp_sim_lpav_probe()
116 return dev_err_probe(&pdev->dev, PTR_ERR(hw), in clk_imx8ulp_sim_lpav_probe()
125 return dev_err_probe(&pdev->dev, -ENODEV, in clk_imx8ulp_sim_lpav_probe()
132 return dev_err_probe(&pdev->dev, ret, in clk_imx8ulp_sim_lpav_probe()
|
| /linux/drivers/clk/ |
| H A D | clk-npcm8xx.c | 315 return dev_err_probe(dev, PTR_ERR(hw), "Can't register pll\n"); in npcm8xx_clk_probe()
322 return dev_err_probe(dev, PTR_ERR(hw), "Can't register fixed div\n"); in npcm8xx_clk_probe()
327 return dev_err_probe(dev, PTR_ERR(hw), "Can't register pll2 div2\n"); in npcm8xx_clk_probe()
332 return dev_err_probe(dev, PTR_ERR(hw), "Can't register gfx div2\n"); in npcm8xx_clk_probe()
351 return dev_err_probe(dev, PTR_ERR(hw), "Can't register mux\n"); in npcm8xx_clk_probe()
357 return dev_err_probe(dev, PTR_ERR(hw), "Can't register pre clk div2\n"); in npcm8xx_clk_probe()
362 return dev_err_probe(dev, PTR_ERR(hw), "Can't register axi div2\n"); in npcm8xx_clk_probe()
367 return dev_err_probe(dev, PTR_ERR(hw), "Can't register atb div2\n"); in npcm8xx_clk_probe()
383 return dev_err_probe(dev, PTR_ERR(hw), "Can't register pre div\n"); in npcm8xx_clk_probe()
403 return dev_err_probe(dev, PTR_ERR(hw), "Can't register div\n"); in npcm8xx_clk_probe()
|