1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * cx18 ADEC audio functions
4 *
5 * Derived from cx25840-core.c
6 *
7 * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
8 * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net>
9 */
10
11 #include "cx18-driver.h"
12 #include "cx18-io.h"
13 #include "cx18-cards.h"
14
cx18_av_write(struct cx18 * cx,u16 addr,u8 value)15 int cx18_av_write(struct cx18 *cx, u16 addr, u8 value)
16 {
17 u32 reg = 0xc40000 + (addr & ~3);
18 u32 mask = 0xff;
19 int shift = (addr & 3) * 8;
20 u32 x = cx18_read_reg(cx, reg);
21
22 x = (x & ~(mask << shift)) | ((u32)value << shift);
23 cx18_write_reg(cx, x, reg);
24 return 0;
25 }
26
cx18_av_write_expect(struct cx18 * cx,u16 addr,u8 value,u8 eval,u8 mask)27 int cx18_av_write_expect(struct cx18 *cx, u16 addr, u8 value, u8 eval, u8 mask)
28 {
29 u32 reg = 0xc40000 + (addr & ~3);
30 int shift = (addr & 3) * 8;
31 u32 x = cx18_read_reg(cx, reg);
32
33 x = (x & ~((u32)0xff << shift)) | ((u32)value << shift);
34 cx18_write_reg_expect(cx, x, reg,
35 ((u32)eval << shift), ((u32)mask << shift));
36 return 0;
37 }
38
cx18_av_write4(struct cx18 * cx,u16 addr,u32 value)39 int cx18_av_write4(struct cx18 *cx, u16 addr, u32 value)
40 {
41 cx18_write_reg(cx, value, 0xc40000 + addr);
42 return 0;
43 }
44
45 int
cx18_av_write4_expect(struct cx18 * cx,u16 addr,u32 value,u32 eval,u32 mask)46 cx18_av_write4_expect(struct cx18 *cx, u16 addr, u32 value, u32 eval, u32 mask)
47 {
48 cx18_write_reg_expect(cx, value, 0xc40000 + addr, eval, mask);
49 return 0;
50 }
51
cx18_av_write4_noretry(struct cx18 * cx,u16 addr,u32 value)52 int cx18_av_write4_noretry(struct cx18 *cx, u16 addr, u32 value)
53 {
54 cx18_write_reg_noretry(cx, value, 0xc40000 + addr);
55 return 0;
56 }
57
cx18_av_read(struct cx18 * cx,u16 addr)58 u8 cx18_av_read(struct cx18 *cx, u16 addr)
59 {
60 u32 x = cx18_read_reg(cx, 0xc40000 + (addr & ~3));
61 int shift = (addr & 3) * 8;
62
63 return (x >> shift) & 0xff;
64 }
65
cx18_av_read4(struct cx18 * cx,u16 addr)66 u32 cx18_av_read4(struct cx18 *cx, u16 addr)
67 {
68 return cx18_read_reg(cx, 0xc40000 + addr);
69 }
70
cx18_av_and_or(struct cx18 * cx,u16 addr,unsigned and_mask,u8 or_value)71 int cx18_av_and_or(struct cx18 *cx, u16 addr, unsigned and_mask,
72 u8 or_value)
73 {
74 return cx18_av_write(cx, addr,
75 (cx18_av_read(cx, addr) & and_mask) |
76 or_value);
77 }
78
cx18_av_and_or4(struct cx18 * cx,u16 addr,u32 and_mask,u32 or_value)79 int cx18_av_and_or4(struct cx18 *cx, u16 addr, u32 and_mask,
80 u32 or_value)
81 {
82 return cx18_av_write4(cx, addr,
83 (cx18_av_read4(cx, addr) & and_mask) |
84 or_value);
85 }
86
cx18_av_init(struct cx18 * cx)87 static void cx18_av_init(struct cx18 *cx)
88 {
89 /*
90 * The crystal freq used in calculations in this driver will be
91 * 28.636360 MHz.
92 * Aim to run the PLLs' VCOs near 400 MHz to minimize errors.
93 */
94
95 /*
96 * VDCLK Integer = 0x0f, Post Divider = 0x04
97 * AIMCLK Integer = 0x0e, Post Divider = 0x16
98 */
99 cx18_av_write4(cx, CXADEC_PLL_CTRL1, 0x160e040f);
100
101 /* VDCLK Fraction = 0x2be2fe */
102 /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz before post divide */
103 cx18_av_write4(cx, CXADEC_VID_PLL_FRAC, 0x002be2fe);
104
105 /* AIMCLK Fraction = 0x05227ad */
106 /* xtal * 0xe.2913d68/0x16 = 48000 * 384: 406 MHz pre post-div*/
107 cx18_av_write4(cx, CXADEC_AUX_PLL_FRAC, 0x005227ad);
108
109 /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x16 */
110 cx18_av_write(cx, CXADEC_I2S_MCLK, 0x56);
111 }
112
cx18_av_initialize(struct v4l2_subdev * sd)113 static void cx18_av_initialize(struct v4l2_subdev *sd)
114 {
115 struct cx18_av_state *state = to_cx18_av_state(sd);
116 struct cx18 *cx = v4l2_get_subdevdata(sd);
117 int default_volume;
118 u32 v;
119
120 cx18_av_loadfw(cx);
121 /* Stop 8051 code execution */
122 cx18_av_write4_expect(cx, CXADEC_DL_CTL, 0x03000000,
123 0x03000000, 0x13000000);
124
125 /* initialize the PLL by toggling sleep bit */
126 v = cx18_av_read4(cx, CXADEC_HOST_REG1);
127 /* enable sleep mode - register appears to be read only... */
128 cx18_av_write4_expect(cx, CXADEC_HOST_REG1, v | 1, v, 0xfffe);
129 /* disable sleep mode */
130 cx18_av_write4_expect(cx, CXADEC_HOST_REG1, v & 0xfffe,
131 v & 0xfffe, 0xffff);
132
133 /* initialize DLLs */
134 v = cx18_av_read4(cx, CXADEC_DLL1_DIAG_CTRL) & 0xE1FFFEFF;
135 /* disable FLD */
136 cx18_av_write4(cx, CXADEC_DLL1_DIAG_CTRL, v);
137 /* enable FLD */
138 cx18_av_write4(cx, CXADEC_DLL1_DIAG_CTRL, v | 0x10000100);
139
140 v = cx18_av_read4(cx, CXADEC_DLL2_DIAG_CTRL) & 0xE1FFFEFF;
141 /* disable FLD */
142 cx18_av_write4(cx, CXADEC_DLL2_DIAG_CTRL, v);
143 /* enable FLD */
144 cx18_av_write4(cx, CXADEC_DLL2_DIAG_CTRL, v | 0x06000100);
145
146 /* set analog bias currents. Set Vreg to 1.20V. */
147 cx18_av_write4(cx, CXADEC_AFE_DIAG_CTRL1, 0x000A1802);
148
149 v = cx18_av_read4(cx, CXADEC_AFE_DIAG_CTRL3) | 1;
150 /* enable TUNE_FIL_RST */
151 cx18_av_write4_expect(cx, CXADEC_AFE_DIAG_CTRL3, v, v, 0x03009F0F);
152 /* disable TUNE_FIL_RST */
153 cx18_av_write4_expect(cx, CXADEC_AFE_DIAG_CTRL3,
154 v & 0xFFFFFFFE, v & 0xFFFFFFFE, 0x03009F0F);
155
156 /* enable 656 output */
157 cx18_av_and_or4(cx, CXADEC_PIN_CTRL1, ~0, 0x040C00);
158
159 /* video output drive strength */
160 cx18_av_and_or4(cx, CXADEC_PIN_CTRL2, ~0, 0x2);
161
162 /* reset video */
163 cx18_av_write4(cx, CXADEC_SOFT_RST_CTRL, 0x8000);
164 cx18_av_write4(cx, CXADEC_SOFT_RST_CTRL, 0);
165
166 /*
167 * Disable Video Auto-config of the Analog Front End and Video PLL.
168 *
169 * Since we only use BT.656 pixel mode, which works for both 525 and 625
170 * line systems, it's just easier for us to set registers
171 * 0x102 (CXADEC_CHIP_CTRL), 0x104-0x106 (CXADEC_AFE_CTRL),
172 * 0x108-0x109 (CXADEC_PLL_CTRL1), and 0x10c-0x10f (CXADEC_VID_PLL_FRAC)
173 * ourselves, than to run around cleaning up after the auto-config.
174 *
175 * (Note: my CX23418 chip doesn't seem to let the ACFG_DIS bit
176 * get set to 1, but OTOH, it doesn't seem to do AFE and VID PLL
177 * autoconfig either.)
178 *
179 * As a default, also turn off Dual mode for ADC2 and set ADC2 to CH3.
180 */
181 cx18_av_and_or4(cx, CXADEC_CHIP_CTRL, 0xFFFBFFFF, 0x00120000);
182
183 /* Setup the Video and Aux/Audio PLLs */
184 cx18_av_init(cx);
185
186 /* set video to auto-detect */
187 /* Clear bits 11-12 to enable slow locking mode. Set autodetect mode */
188 /* set the comb notch = 1 */
189 cx18_av_and_or4(cx, CXADEC_MODE_CTRL, 0xFFF7E7F0, 0x02040800);
190
191 /* Enable wtw_en in CRUSH_CTRL (Set bit 22) */
192 /* Enable maj_sel in CRUSH_CTRL (Set bit 20) */
193 cx18_av_and_or4(cx, CXADEC_CRUSH_CTRL, ~0, 0x00500000);
194
195 /* Set VGA_TRACK_RANGE to 0x20 */
196 cx18_av_and_or4(cx, CXADEC_DFE_CTRL2, 0xFFFF00FF, 0x00002000);
197
198 /*
199 * Initial VBI setup
200 * VIP-1.1, 10 bit mode, enable Raw, disable sliced,
201 * don't clamp raw samples when codes are in use, 1 byte user D-words,
202 * IDID0 has line #, RP code V bit transition on VBLANK, data during
203 * blanking intervals
204 */
205 cx18_av_write4(cx, CXADEC_OUT_CTRL1, 0x4013252e);
206
207 /* Set the video input.
208 The setting in MODE_CTRL gets lost when we do the above setup */
209 /* EncSetSignalStd(dwDevNum, pEnc->dwSigStd); */
210 /* EncSetVideoInput(dwDevNum, pEnc->VidIndSelection); */
211
212 /*
213 * Analog Front End (AFE)
214 * Default to luma on ch1/ADC1, chroma on ch2/ADC2, SIF on ch3/ADC2
215 * bypass_ch[1-3] use filter
216 * droop_comp_ch[1-3] disable
217 * clamp_en_ch[1-3] disable
218 * aud_in_sel ADC2
219 * luma_in_sel ADC1
220 * chroma_in_sel ADC2
221 * clamp_sel_ch[2-3] midcode
222 * clamp_sel_ch1 video decoder
223 * vga_sel_ch3 audio decoder
224 * vga_sel_ch[1-2] video decoder
225 * half_bw_ch[1-3] disable
226 * +12db_ch[1-3] disable
227 */
228 cx18_av_and_or4(cx, CXADEC_AFE_CTRL, 0xFF000000, 0x00005D00);
229
230 /* if(dwEnable && dw3DCombAvailable) { */
231 /* CxDevWrReg(CXADEC_SRC_COMB_CFG, 0x7728021F); */
232 /* } else { */
233 /* CxDevWrReg(CXADEC_SRC_COMB_CFG, 0x6628021F); */
234 /* } */
235 cx18_av_write4(cx, CXADEC_SRC_COMB_CFG, 0x6628021F);
236 default_volume = cx18_av_read(cx, 0x8d4);
237 /*
238 * Enforce the legacy volume scale mapping limits to avoid
239 * -ERANGE errors when initializing the volume control
240 */
241 if (default_volume > 228) {
242 /* Bottom out at -96 dB, v4l2 vol range 0x2e00-0x2fff */
243 default_volume = 228;
244 cx18_av_write(cx, 0x8d4, 228);
245 } else if (default_volume < 20) {
246 /* Top out at + 8 dB, v4l2 vol range 0xfe00-0xffff */
247 default_volume = 20;
248 cx18_av_write(cx, 0x8d4, 20);
249 }
250 default_volume = (((228 - default_volume) >> 1) + 23) << 9;
251 state->volume->cur.val = state->volume->default_value = default_volume;
252 v4l2_ctrl_handler_setup(&state->hdl);
253 }
254
cx18_av_reset(struct v4l2_subdev * sd,u32 val)255 static int cx18_av_reset(struct v4l2_subdev *sd, u32 val)
256 {
257 cx18_av_initialize(sd);
258 return 0;
259 }
260
cx18_av_load_fw(struct v4l2_subdev * sd)261 static int cx18_av_load_fw(struct v4l2_subdev *sd)
262 {
263 struct cx18_av_state *state = to_cx18_av_state(sd);
264
265 if (!state->is_initialized) {
266 /* initialize on first use */
267 state->is_initialized = 1;
268 cx18_av_initialize(sd);
269 }
270 return 0;
271 }
272
cx18_av_std_setup(struct cx18 * cx)273 void cx18_av_std_setup(struct cx18 *cx)
274 {
275 struct cx18_av_state *state = &cx->av_state;
276 struct v4l2_subdev *sd = &state->sd;
277 v4l2_std_id std = state->std;
278
279 /*
280 * Video ADC crystal clock to pixel clock SRC decimation ratio
281 * 28.636360 MHz/13.5 Mpps * 256 = 0x21f.07b
282 */
283 const int src_decimation = 0x21f;
284
285 int hblank, hactive, burst, vblank, vactive, sc;
286 int vblank656;
287 int luma_lpf, uv_lpf, comb;
288 u32 pll_int, pll_frac, pll_post;
289
290 /* datasheet startup, step 8d */
291 if (std & ~V4L2_STD_NTSC)
292 cx18_av_write(cx, 0x49f, 0x11);
293 else
294 cx18_av_write(cx, 0x49f, 0x14);
295
296 /*
297 * Note: At the end of a field, there are 3 sets of half line duration
298 * (double horizontal rate) pulses:
299 *
300 * 5 (625) or 6 (525) half-lines to blank for the vertical retrace
301 * 5 (625) or 6 (525) vertical sync pulses of half line duration
302 * 5 (625) or 6 (525) half-lines of equalization pulses
303 */
304 if (std & V4L2_STD_625_50) {
305 /*
306 * The following relationships of half line counts should hold:
307 * 625 = vblank656 + vactive
308 * 10 = vblank656 - vblank = vsync pulses + equalization pulses
309 *
310 * vblank656: half lines after line 625/mid-313 of blanked video
311 * vblank: half lines, after line 5/317, of blanked video
312 * vactive: half lines of active video +
313 * 5 half lines after the end of active video
314 *
315 * As far as I can tell:
316 * vblank656 starts counting from the falling edge of the first
317 * vsync pulse (start of line 1 or mid-313)
318 * vblank starts counting from the after the 5 vsync pulses and
319 * 5 or 4 equalization pulses (start of line 6 or 318)
320 *
321 * For 625 line systems the driver will extract VBI information
322 * from lines 6-23 and lines 318-335 (but the slicer can only
323 * handle 17 lines, not the 18 in the vblank region).
324 * In addition, we need vblank656 and vblank to be one whole
325 * line longer, to cover line 24 and 336, so the SAV/EAV RP
326 * codes get generated such that the encoder can actually
327 * extract line 23 & 335 (WSS). We'll lose 1 line in each field
328 * at the top of the screen.
329 *
330 * It appears the 5 half lines that happen after active
331 * video must be included in vactive (579 instead of 574),
332 * otherwise the colors get badly displayed in various regions
333 * of the screen. I guess the chroma comb filter gets confused
334 * without them (at least when a PVR-350 is the PAL source).
335 */
336 vblank656 = 48; /* lines 1 - 24 & 313 - 336 */
337 vblank = 38; /* lines 6 - 24 & 318 - 336 */
338 vactive = 579; /* lines 24 - 313 & 337 - 626 */
339
340 /*
341 * For a 13.5 Mpps clock and 15,625 Hz line rate, a line is
342 * 864 pixels = 720 active + 144 blanking. ITU-R BT.601
343 * specifies 12 luma clock periods or ~ 0.9 * 13.5 Mpps after
344 * the end of active video to start a horizontal line, so that
345 * leaves 132 pixels of hblank to ignore.
346 */
347 hblank = 132;
348 hactive = 720;
349
350 /*
351 * Burst gate delay (for 625 line systems)
352 * Hsync leading edge to color burst rise = 5.6 us
353 * Color burst width = 2.25 us
354 * Gate width = 4 pixel clocks
355 * (5.6 us + 2.25/2 us) * 13.5 Mpps + 4/2 clocks = 92.79 clocks
356 */
357 burst = 93;
358 luma_lpf = 2;
359 if (std & V4L2_STD_PAL) {
360 uv_lpf = 1;
361 comb = 0x20;
362 /* sc = 4433618.75 * src_decimation/28636360 * 2^13 */
363 sc = 688700;
364 } else if (std == V4L2_STD_PAL_Nc) {
365 uv_lpf = 1;
366 comb = 0x20;
367 /* sc = 3582056.25 * src_decimation/28636360 * 2^13 */
368 sc = 556422;
369 } else { /* SECAM */
370 uv_lpf = 0;
371 comb = 0;
372 /* (fr + fb)/2 = (4406260 + 4250000)/2 = 4328130 */
373 /* sc = 4328130 * src_decimation/28636360 * 2^13 */
374 sc = 672314;
375 }
376 } else {
377 /*
378 * The following relationships of half line counts should hold:
379 * 525 = prevsync + vblank656 + vactive
380 * 12 = vblank656 - vblank = vsync pulses + equalization pulses
381 *
382 * prevsync: 6 half-lines before the vsync pulses
383 * vblank656: half lines, after line 3/mid-266, of blanked video
384 * vblank: half lines, after line 9/272, of blanked video
385 * vactive: half lines of active video
386 *
387 * As far as I can tell:
388 * vblank656 starts counting from the falling edge of the first
389 * vsync pulse (start of line 4 or mid-266)
390 * vblank starts counting from the after the 6 vsync pulses and
391 * 6 or 5 equalization pulses (start of line 10 or 272)
392 *
393 * For 525 line systems the driver will extract VBI information
394 * from lines 10-21 and lines 273-284.
395 */
396 vblank656 = 38; /* lines 4 - 22 & 266 - 284 */
397 vblank = 26; /* lines 10 - 22 & 272 - 284 */
398 vactive = 481; /* lines 23 - 263 & 285 - 525 */
399
400 /*
401 * For a 13.5 Mpps clock and 15,734.26 Hz line rate, a line is
402 * 858 pixels = 720 active + 138 blanking. The Hsync leading
403 * edge should happen 1.2 us * 13.5 Mpps ~= 16 pixels after the
404 * end of active video, leaving 122 pixels of hblank to ignore
405 * before active video starts.
406 */
407 hactive = 720;
408 hblank = 122;
409 luma_lpf = 1;
410 uv_lpf = 1;
411
412 /*
413 * Burst gate delay (for 525 line systems)
414 * Hsync leading edge to color burst rise = 5.3 us
415 * Color burst width = 2.5 us
416 * Gate width = 4 pixel clocks
417 * (5.3 us + 2.5/2 us) * 13.5 Mpps + 4/2 clocks = 90.425 clocks
418 */
419 if (std == V4L2_STD_PAL_60) {
420 burst = 90;
421 luma_lpf = 2;
422 comb = 0x20;
423 /* sc = 4433618.75 * src_decimation/28636360 * 2^13 */
424 sc = 688700;
425 } else if (std == V4L2_STD_PAL_M) {
426 /* The 97 needs to be verified against PAL-M timings */
427 burst = 97;
428 comb = 0x20;
429 /* sc = 3575611.49 * src_decimation/28636360 * 2^13 */
430 sc = 555421;
431 } else {
432 burst = 90;
433 comb = 0x66;
434 /* sc = 3579545.45.. * src_decimation/28636360 * 2^13 */
435 sc = 556032;
436 }
437 }
438
439 /* DEBUG: Displays configured PLL frequency */
440 pll_int = cx18_av_read(cx, 0x108);
441 pll_frac = cx18_av_read4(cx, 0x10c) & 0x1ffffff;
442 pll_post = cx18_av_read(cx, 0x109);
443 CX18_DEBUG_INFO_DEV(sd, "PLL regs = int: %u, frac: %u, post: %u\n",
444 pll_int, pll_frac, pll_post);
445
446 if (pll_post) {
447 int fsc, pll;
448 u64 tmp;
449
450 pll = (28636360L * ((((u64)pll_int) << 25) + pll_frac)) >> 25;
451 pll /= pll_post;
452 CX18_DEBUG_INFO_DEV(sd, "Video PLL = %d.%06d MHz\n",
453 pll / 1000000, pll % 1000000);
454 CX18_DEBUG_INFO_DEV(sd, "Pixel rate = %d.%06d Mpixel/sec\n",
455 pll / 8000000, (pll / 8) % 1000000);
456
457 CX18_DEBUG_INFO_DEV(sd, "ADC XTAL/pixel clock decimation ratio = %d.%03d\n",
458 src_decimation / 256,
459 ((src_decimation % 256) * 1000) / 256);
460
461 tmp = 28636360 * (u64) sc;
462 do_div(tmp, src_decimation);
463 fsc = tmp >> 13;
464 CX18_DEBUG_INFO_DEV(sd,
465 "Chroma sub-carrier initial freq = %d.%06d MHz\n",
466 fsc / 1000000, fsc % 1000000);
467
468 CX18_DEBUG_INFO_DEV(sd,
469 "hblank %i, hactive %i, vblank %i, vactive %i, vblank656 %i, src_dec %i, burst 0x%02x, luma_lpf %i, uv_lpf %i, comb 0x%02x, sc 0x%06x\n",
470 hblank, hactive, vblank, vactive, vblank656,
471 src_decimation, burst, luma_lpf, uv_lpf,
472 comb, sc);
473 }
474
475 /* Sets horizontal blanking delay and active lines */
476 cx18_av_write(cx, 0x470, hblank);
477 cx18_av_write(cx, 0x471,
478 (((hblank >> 8) & 0x3) | (hactive << 4)) & 0xff);
479 cx18_av_write(cx, 0x472, hactive >> 4);
480
481 /* Sets burst gate delay */
482 cx18_av_write(cx, 0x473, burst);
483
484 /* Sets vertical blanking delay and active duration */
485 cx18_av_write(cx, 0x474, vblank);
486 cx18_av_write(cx, 0x475,
487 (((vblank >> 8) & 0x3) | (vactive << 4)) & 0xff);
488 cx18_av_write(cx, 0x476, vactive >> 4);
489 cx18_av_write(cx, 0x477, vblank656);
490
491 /* Sets src decimation rate */
492 cx18_av_write(cx, 0x478, src_decimation & 0xff);
493 cx18_av_write(cx, 0x479, (src_decimation >> 8) & 0xff);
494
495 /* Sets Luma and UV Low pass filters */
496 cx18_av_write(cx, 0x47a, luma_lpf << 6 | ((uv_lpf << 4) & 0x30));
497
498 /* Enables comb filters */
499 cx18_av_write(cx, 0x47b, comb);
500
501 /* Sets SC Step*/
502 cx18_av_write(cx, 0x47c, sc);
503 cx18_av_write(cx, 0x47d, (sc >> 8) & 0xff);
504 cx18_av_write(cx, 0x47e, (sc >> 16) & 0xff);
505
506 if (std & V4L2_STD_625_50) {
507 state->slicer_line_delay = 1;
508 state->slicer_line_offset = (6 + state->slicer_line_delay - 2);
509 } else {
510 state->slicer_line_delay = 0;
511 state->slicer_line_offset = (10 + state->slicer_line_delay - 2);
512 }
513 cx18_av_write(cx, 0x47f, state->slicer_line_delay);
514 }
515
input_change(struct cx18 * cx)516 static void input_change(struct cx18 *cx)
517 {
518 struct cx18_av_state *state = &cx->av_state;
519 v4l2_std_id std = state->std;
520 u8 v;
521
522 /* Follow step 8c and 8d of section 3.16 in the cx18_av datasheet */
523 cx18_av_write(cx, 0x49f, (std & V4L2_STD_NTSC) ? 0x14 : 0x11);
524 cx18_av_and_or(cx, 0x401, ~0x60, 0);
525 cx18_av_and_or(cx, 0x401, ~0x60, 0x60);
526
527 if (std & V4L2_STD_525_60) {
528 if (std == V4L2_STD_NTSC_M_JP) {
529 /* Japan uses EIAJ audio standard */
530 cx18_av_write_expect(cx, 0x808, 0xf7, 0xf7, 0xff);
531 cx18_av_write_expect(cx, 0x80b, 0x02, 0x02, 0x3f);
532 } else if (std == V4L2_STD_NTSC_M_KR) {
533 /* South Korea uses A2 audio standard */
534 cx18_av_write_expect(cx, 0x808, 0xf8, 0xf8, 0xff);
535 cx18_av_write_expect(cx, 0x80b, 0x03, 0x03, 0x3f);
536 } else {
537 /* Others use the BTSC audio standard */
538 cx18_av_write_expect(cx, 0x808, 0xf6, 0xf6, 0xff);
539 cx18_av_write_expect(cx, 0x80b, 0x01, 0x01, 0x3f);
540 }
541 } else if (std & V4L2_STD_PAL) {
542 /* Follow tuner change procedure for PAL */
543 cx18_av_write_expect(cx, 0x808, 0xff, 0xff, 0xff);
544 cx18_av_write_expect(cx, 0x80b, 0x03, 0x03, 0x3f);
545 } else if (std & V4L2_STD_SECAM) {
546 /* Select autodetect for SECAM */
547 cx18_av_write_expect(cx, 0x808, 0xff, 0xff, 0xff);
548 cx18_av_write_expect(cx, 0x80b, 0x03, 0x03, 0x3f);
549 }
550
551 v = cx18_av_read(cx, 0x803);
552 if (v & 0x10) {
553 /* restart audio decoder microcontroller */
554 v &= ~0x10;
555 cx18_av_write_expect(cx, 0x803, v, v, 0x1f);
556 v |= 0x10;
557 cx18_av_write_expect(cx, 0x803, v, v, 0x1f);
558 }
559 }
560
cx18_av_s_frequency(struct v4l2_subdev * sd,const struct v4l2_frequency * freq)561 static int cx18_av_s_frequency(struct v4l2_subdev *sd,
562 const struct v4l2_frequency *freq)
563 {
564 struct cx18 *cx = v4l2_get_subdevdata(sd);
565 input_change(cx);
566 return 0;
567 }
568
set_input(struct cx18 * cx,enum cx18_av_video_input vid_input,enum cx18_av_audio_input aud_input)569 static int set_input(struct cx18 *cx, enum cx18_av_video_input vid_input,
570 enum cx18_av_audio_input aud_input)
571 {
572 struct cx18_av_state *state = &cx->av_state;
573 struct v4l2_subdev *sd = &state->sd;
574
575 enum analog_signal_type {
576 NONE, CVBS, Y, C, SIF, Pb, Pr
577 } ch[3] = {NONE, NONE, NONE};
578
579 u8 afe_mux_cfg;
580 u8 adc2_cfg;
581 u8 input_mode;
582 u32 afe_cfg;
583 int i;
584
585 CX18_DEBUG_INFO_DEV(sd, "decoder set video input %d, audio input %d\n",
586 vid_input, aud_input);
587
588 if (vid_input >= CX18_AV_COMPOSITE1 &&
589 vid_input <= CX18_AV_COMPOSITE8) {
590 afe_mux_cfg = 0xf0 + (vid_input - CX18_AV_COMPOSITE1);
591 ch[0] = CVBS;
592 input_mode = 0x0;
593 } else if (vid_input >= CX18_AV_COMPONENT_LUMA1) {
594 int luma = vid_input & 0xf000;
595 int r_chroma = vid_input & 0xf0000;
596 int b_chroma = vid_input & 0xf00000;
597
598 if ((vid_input & ~0xfff000) ||
599 luma < CX18_AV_COMPONENT_LUMA1 ||
600 luma > CX18_AV_COMPONENT_LUMA8 ||
601 r_chroma < CX18_AV_COMPONENT_R_CHROMA4 ||
602 r_chroma > CX18_AV_COMPONENT_R_CHROMA6 ||
603 b_chroma < CX18_AV_COMPONENT_B_CHROMA7 ||
604 b_chroma > CX18_AV_COMPONENT_B_CHROMA8) {
605 CX18_ERR_DEV(sd, "0x%06x is not a valid video input!\n",
606 vid_input);
607 return -EINVAL;
608 }
609 afe_mux_cfg = (luma - CX18_AV_COMPONENT_LUMA1) >> 12;
610 ch[0] = Y;
611 afe_mux_cfg |= (r_chroma - CX18_AV_COMPONENT_R_CHROMA4) >> 12;
612 ch[1] = Pr;
613 afe_mux_cfg |= (b_chroma - CX18_AV_COMPONENT_B_CHROMA7) >> 14;
614 ch[2] = Pb;
615 input_mode = 0x6;
616 } else {
617 int luma = vid_input & 0xf0;
618 int chroma = vid_input & 0xf00;
619
620 if ((vid_input & ~0xff0) ||
621 luma < CX18_AV_SVIDEO_LUMA1 ||
622 luma > CX18_AV_SVIDEO_LUMA8 ||
623 chroma < CX18_AV_SVIDEO_CHROMA4 ||
624 chroma > CX18_AV_SVIDEO_CHROMA8) {
625 CX18_ERR_DEV(sd, "0x%06x is not a valid video input!\n",
626 vid_input);
627 return -EINVAL;
628 }
629 afe_mux_cfg = 0xf0 + ((luma - CX18_AV_SVIDEO_LUMA1) >> 4);
630 ch[0] = Y;
631 if (chroma >= CX18_AV_SVIDEO_CHROMA7) {
632 afe_mux_cfg &= 0x3f;
633 afe_mux_cfg |= (chroma - CX18_AV_SVIDEO_CHROMA7) >> 2;
634 ch[2] = C;
635 } else {
636 afe_mux_cfg &= 0xcf;
637 afe_mux_cfg |= (chroma - CX18_AV_SVIDEO_CHROMA4) >> 4;
638 ch[1] = C;
639 }
640 input_mode = 0x2;
641 }
642
643 switch (aud_input) {
644 case CX18_AV_AUDIO_SERIAL1:
645 case CX18_AV_AUDIO_SERIAL2:
646 /* do nothing, use serial audio input */
647 break;
648 case CX18_AV_AUDIO4:
649 afe_mux_cfg &= ~0x30;
650 ch[1] = SIF;
651 break;
652 case CX18_AV_AUDIO5:
653 afe_mux_cfg = (afe_mux_cfg & ~0x30) | 0x10;
654 ch[1] = SIF;
655 break;
656 case CX18_AV_AUDIO6:
657 afe_mux_cfg = (afe_mux_cfg & ~0x30) | 0x20;
658 ch[1] = SIF;
659 break;
660 case CX18_AV_AUDIO7:
661 afe_mux_cfg &= ~0xc0;
662 ch[2] = SIF;
663 break;
664 case CX18_AV_AUDIO8:
665 afe_mux_cfg = (afe_mux_cfg & ~0xc0) | 0x40;
666 ch[2] = SIF;
667 break;
668
669 default:
670 CX18_ERR_DEV(sd, "0x%04x is not a valid audio input!\n",
671 aud_input);
672 return -EINVAL;
673 }
674
675 /* Set up analog front end multiplexers */
676 cx18_av_write_expect(cx, 0x103, afe_mux_cfg, afe_mux_cfg, 0xf7);
677 /* Set INPUT_MODE to Composite, S-Video, or Component */
678 cx18_av_and_or(cx, 0x401, ~0x6, input_mode);
679
680 /* Set CH_SEL_ADC2 to 1 if input comes from CH3 */
681 adc2_cfg = cx18_av_read(cx, 0x102);
682 if (ch[2] == NONE)
683 adc2_cfg &= ~0x2; /* No sig on CH3, set ADC2 to CH2 for input */
684 else
685 adc2_cfg |= 0x2; /* Signal on CH3, set ADC2 to CH3 for input */
686
687 /* Set DUAL_MODE_ADC2 to 1 if input comes from both CH2 and CH3 */
688 if (ch[1] != NONE && ch[2] != NONE)
689 adc2_cfg |= 0x4; /* Set dual mode */
690 else
691 adc2_cfg &= ~0x4; /* Clear dual mode */
692 cx18_av_write_expect(cx, 0x102, adc2_cfg, adc2_cfg, 0x17);
693
694 /* Configure the analog front end */
695 afe_cfg = cx18_av_read4(cx, CXADEC_AFE_CTRL);
696 afe_cfg &= 0xff000000;
697 afe_cfg |= 0x00005000; /* CHROMA_IN, AUD_IN: ADC2; LUMA_IN: ADC1 */
698 if (ch[1] != NONE && ch[2] != NONE)
699 afe_cfg |= 0x00000030; /* half_bw_ch[2-3] since in dual mode */
700
701 for (i = 0; i < 3; i++) {
702 switch (ch[i]) {
703 default:
704 case NONE:
705 /* CLAMP_SEL = Fixed to midcode clamp level */
706 afe_cfg |= (0x00000200 << i);
707 break;
708 case CVBS:
709 case Y:
710 if (i > 0)
711 afe_cfg |= 0x00002000; /* LUMA_IN_SEL: ADC2 */
712 break;
713 case C:
714 case Pb:
715 case Pr:
716 /* CLAMP_SEL = Fixed to midcode clamp level */
717 afe_cfg |= (0x00000200 << i);
718 if (i == 0 && ch[i] == C)
719 afe_cfg &= ~0x00001000; /* CHROMA_IN_SEL ADC1 */
720 break;
721 case SIF:
722 /*
723 * VGA_GAIN_SEL = Audio Decoder
724 * CLAMP_SEL = Fixed to midcode clamp level
725 */
726 afe_cfg |= (0x00000240 << i);
727 if (i == 0)
728 afe_cfg &= ~0x00004000; /* AUD_IN_SEL ADC1 */
729 break;
730 }
731 }
732
733 cx18_av_write4(cx, CXADEC_AFE_CTRL, afe_cfg);
734
735 state->vid_input = vid_input;
736 state->aud_input = aud_input;
737 cx18_av_audio_set_path(cx);
738 input_change(cx);
739 return 0;
740 }
741
cx18_av_s_video_routing(struct v4l2_subdev * sd,u32 input,u32 output,u32 config)742 static int cx18_av_s_video_routing(struct v4l2_subdev *sd,
743 u32 input, u32 output, u32 config)
744 {
745 struct cx18_av_state *state = to_cx18_av_state(sd);
746 struct cx18 *cx = v4l2_get_subdevdata(sd);
747 return set_input(cx, input, state->aud_input);
748 }
749
cx18_av_s_audio_routing(struct v4l2_subdev * sd,u32 input,u32 output,u32 config)750 static int cx18_av_s_audio_routing(struct v4l2_subdev *sd,
751 u32 input, u32 output, u32 config)
752 {
753 struct cx18_av_state *state = to_cx18_av_state(sd);
754 struct cx18 *cx = v4l2_get_subdevdata(sd);
755 return set_input(cx, state->vid_input, input);
756 }
757
cx18_av_g_tuner(struct v4l2_subdev * sd,struct v4l2_tuner * vt)758 static int cx18_av_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
759 {
760 struct cx18_av_state *state = to_cx18_av_state(sd);
761 struct cx18 *cx = v4l2_get_subdevdata(sd);
762 u8 vpres;
763 u8 mode;
764 int val = 0;
765
766 if (state->radio)
767 return 0;
768
769 vpres = cx18_av_read(cx, 0x40e) & 0x20;
770 vt->signal = vpres ? 0xffff : 0x0;
771
772 vt->capability |=
773 V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LANG1 |
774 V4L2_TUNER_CAP_LANG2 | V4L2_TUNER_CAP_SAP;
775
776 mode = cx18_av_read(cx, 0x804);
777
778 /* get rxsubchans and audmode */
779 if ((mode & 0xf) == 1)
780 val |= V4L2_TUNER_SUB_STEREO;
781 else
782 val |= V4L2_TUNER_SUB_MONO;
783
784 if (mode == 2 || mode == 4)
785 val = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
786
787 if (mode & 0x10)
788 val |= V4L2_TUNER_SUB_SAP;
789
790 vt->rxsubchans = val;
791 vt->audmode = state->audmode;
792 return 0;
793 }
794
cx18_av_s_tuner(struct v4l2_subdev * sd,const struct v4l2_tuner * vt)795 static int cx18_av_s_tuner(struct v4l2_subdev *sd, const struct v4l2_tuner *vt)
796 {
797 struct cx18_av_state *state = to_cx18_av_state(sd);
798 struct cx18 *cx = v4l2_get_subdevdata(sd);
799 u8 v;
800
801 if (state->radio)
802 return 0;
803
804 v = cx18_av_read(cx, 0x809);
805 v &= ~0xf;
806
807 switch (vt->audmode) {
808 case V4L2_TUNER_MODE_MONO:
809 /* mono -> mono
810 stereo -> mono
811 bilingual -> lang1 */
812 break;
813 case V4L2_TUNER_MODE_STEREO:
814 case V4L2_TUNER_MODE_LANG1:
815 /* mono -> mono
816 stereo -> stereo
817 bilingual -> lang1 */
818 v |= 0x4;
819 break;
820 case V4L2_TUNER_MODE_LANG1_LANG2:
821 /* mono -> mono
822 stereo -> stereo
823 bilingual -> lang1/lang2 */
824 v |= 0x7;
825 break;
826 case V4L2_TUNER_MODE_LANG2:
827 /* mono -> mono
828 stereo -> stereo
829 bilingual -> lang2 */
830 v |= 0x1;
831 break;
832 default:
833 return -EINVAL;
834 }
835 cx18_av_write_expect(cx, 0x809, v, v, 0xff);
836 state->audmode = vt->audmode;
837 return 0;
838 }
839
cx18_av_s_std(struct v4l2_subdev * sd,v4l2_std_id norm)840 static int cx18_av_s_std(struct v4l2_subdev *sd, v4l2_std_id norm)
841 {
842 struct cx18_av_state *state = to_cx18_av_state(sd);
843 struct cx18 *cx = v4l2_get_subdevdata(sd);
844
845 u8 fmt = 0; /* zero is autodetect */
846 u8 pal_m = 0;
847
848 if (state->radio == 0 && state->std == norm)
849 return 0;
850
851 state->radio = 0;
852 state->std = norm;
853
854 /* First tests should be against specific std */
855 if (state->std == V4L2_STD_NTSC_M_JP) {
856 fmt = 0x2;
857 } else if (state->std == V4L2_STD_NTSC_443) {
858 fmt = 0x3;
859 } else if (state->std == V4L2_STD_PAL_M) {
860 pal_m = 1;
861 fmt = 0x5;
862 } else if (state->std == V4L2_STD_PAL_N) {
863 fmt = 0x6;
864 } else if (state->std == V4L2_STD_PAL_Nc) {
865 fmt = 0x7;
866 } else if (state->std == V4L2_STD_PAL_60) {
867 fmt = 0x8;
868 } else {
869 /* Then, test against generic ones */
870 if (state->std & V4L2_STD_NTSC)
871 fmt = 0x1;
872 else if (state->std & V4L2_STD_PAL)
873 fmt = 0x4;
874 else if (state->std & V4L2_STD_SECAM)
875 fmt = 0xc;
876 }
877
878 CX18_DEBUG_INFO_DEV(sd, "changing video std to fmt %i\n", fmt);
879
880 /* Follow step 9 of section 3.16 in the cx18_av datasheet.
881 Without this PAL may display a vertical ghosting effect.
882 This happens for example with the Yuan MPC622. */
883 if (fmt >= 4 && fmt < 8) {
884 /* Set format to NTSC-M */
885 cx18_av_and_or(cx, 0x400, ~0xf, 1);
886 /* Turn off LCOMB */
887 cx18_av_and_or(cx, 0x47b, ~6, 0);
888 }
889 cx18_av_and_or(cx, 0x400, ~0x2f, fmt | 0x20);
890 cx18_av_and_or(cx, 0x403, ~0x3, pal_m);
891 cx18_av_std_setup(cx);
892 input_change(cx);
893 return 0;
894 }
895
cx18_av_s_radio(struct v4l2_subdev * sd)896 static int cx18_av_s_radio(struct v4l2_subdev *sd)
897 {
898 struct cx18_av_state *state = to_cx18_av_state(sd);
899 state->radio = 1;
900 return 0;
901 }
902
cx18_av_s_ctrl(struct v4l2_ctrl * ctrl)903 static int cx18_av_s_ctrl(struct v4l2_ctrl *ctrl)
904 {
905 struct v4l2_subdev *sd = to_sd(ctrl);
906 struct cx18 *cx = v4l2_get_subdevdata(sd);
907
908 switch (ctrl->id) {
909 case V4L2_CID_BRIGHTNESS:
910 cx18_av_write(cx, 0x414, ctrl->val - 128);
911 break;
912
913 case V4L2_CID_CONTRAST:
914 cx18_av_write(cx, 0x415, ctrl->val << 1);
915 break;
916
917 case V4L2_CID_SATURATION:
918 cx18_av_write(cx, 0x420, ctrl->val << 1);
919 cx18_av_write(cx, 0x421, ctrl->val << 1);
920 break;
921
922 case V4L2_CID_HUE:
923 cx18_av_write(cx, 0x422, ctrl->val);
924 break;
925
926 default:
927 return -EINVAL;
928 }
929 return 0;
930 }
931
cx18_av_set_fmt(struct v4l2_subdev * sd,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_format * format)932 static int cx18_av_set_fmt(struct v4l2_subdev *sd,
933 struct v4l2_subdev_state *sd_state,
934 struct v4l2_subdev_format *format)
935 {
936 struct v4l2_mbus_framefmt *fmt = &format->format;
937 struct cx18_av_state *state = to_cx18_av_state(sd);
938 struct cx18 *cx = v4l2_get_subdevdata(sd);
939 int HSC, VSC, Vsrc, Hsrc, filter, Vlines;
940 int is_50Hz = !(state->std & V4L2_STD_525_60);
941
942 if (format->pad || fmt->code != MEDIA_BUS_FMT_FIXED)
943 return -EINVAL;
944
945 fmt->field = V4L2_FIELD_INTERLACED;
946 fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
947
948 Vsrc = (cx18_av_read(cx, 0x476) & 0x3f) << 4;
949 Vsrc |= (cx18_av_read(cx, 0x475) & 0xf0) >> 4;
950
951 Hsrc = (cx18_av_read(cx, 0x472) & 0x3f) << 4;
952 Hsrc |= (cx18_av_read(cx, 0x471) & 0xf0) >> 4;
953
954 /*
955 * This adjustment reflects the excess of vactive, set in
956 * cx18_av_std_setup(), above standard values:
957 *
958 * 480 + 1 for 60 Hz systems
959 * 576 + 3 for 50 Hz systems
960 */
961 Vlines = fmt->height + (is_50Hz ? 3 : 1);
962
963 /*
964 * Invalid height and width scaling requests are:
965 * 1. width less than 1/16 of the source width
966 * 2. width greater than the source width
967 * 3. height less than 1/8 of the source height
968 * 4. height greater than the source height
969 */
970 if ((fmt->width * 16 < Hsrc) || (Hsrc < fmt->width) ||
971 (Vlines * 8 < Vsrc) || (Vsrc < Vlines)) {
972 CX18_ERR_DEV(sd, "%dx%d is not a valid size!\n",
973 fmt->width, fmt->height);
974 return -ERANGE;
975 }
976
977 if (format->which == V4L2_SUBDEV_FORMAT_TRY)
978 return 0;
979
980 HSC = (Hsrc * (1 << 20)) / fmt->width - (1 << 20);
981 VSC = (1 << 16) - (Vsrc * (1 << 9) / Vlines - (1 << 9));
982 VSC &= 0x1fff;
983
984 if (fmt->width >= 385)
985 filter = 0;
986 else if (fmt->width > 192)
987 filter = 1;
988 else if (fmt->width > 96)
989 filter = 2;
990 else
991 filter = 3;
992
993 CX18_DEBUG_INFO_DEV(sd,
994 "decoder set size %dx%d -> scale %ux%u\n",
995 fmt->width, fmt->height, HSC, VSC);
996
997 /* HSCALE=HSC */
998 cx18_av_write(cx, 0x418, HSC & 0xff);
999 cx18_av_write(cx, 0x419, (HSC >> 8) & 0xff);
1000 cx18_av_write(cx, 0x41a, HSC >> 16);
1001 /* VSCALE=VSC */
1002 cx18_av_write(cx, 0x41c, VSC & 0xff);
1003 cx18_av_write(cx, 0x41d, VSC >> 8);
1004 /* VS_INTRLACE=1 VFILT=filter */
1005 cx18_av_write(cx, 0x41e, 0x8 | filter);
1006 return 0;
1007 }
1008
cx18_av_s_stream(struct v4l2_subdev * sd,int enable)1009 static int cx18_av_s_stream(struct v4l2_subdev *sd, int enable)
1010 {
1011 struct cx18 *cx = v4l2_get_subdevdata(sd);
1012
1013 CX18_DEBUG_INFO_DEV(sd, "%s output\n", enable ? "enable" : "disable");
1014 if (enable) {
1015 cx18_av_write(cx, 0x115, 0x8c);
1016 cx18_av_write(cx, 0x116, 0x07);
1017 } else {
1018 cx18_av_write(cx, 0x115, 0x00);
1019 cx18_av_write(cx, 0x116, 0x00);
1020 }
1021 return 0;
1022 }
1023
log_video_status(struct cx18 * cx)1024 static void log_video_status(struct cx18 *cx)
1025 {
1026 static const char *const fmt_strs[] = {
1027 "0x0",
1028 "NTSC-M", "NTSC-J", "NTSC-4.43",
1029 "PAL-BDGHI", "PAL-M", "PAL-N", "PAL-Nc", "PAL-60",
1030 "0x9", "0xA", "0xB",
1031 "SECAM",
1032 "0xD", "0xE", "0xF"
1033 };
1034
1035 struct cx18_av_state *state = &cx->av_state;
1036 struct v4l2_subdev *sd = &state->sd;
1037 u8 vidfmt_sel = cx18_av_read(cx, 0x400) & 0xf;
1038 u8 gen_stat1 = cx18_av_read(cx, 0x40d);
1039 u8 gen_stat2 = cx18_av_read(cx, 0x40e);
1040 int vid_input = state->vid_input;
1041
1042 CX18_INFO_DEV(sd, "Video signal: %spresent\n",
1043 (gen_stat2 & 0x20) ? "" : "not ");
1044 CX18_INFO_DEV(sd, "Detected format: %s\n",
1045 fmt_strs[gen_stat1 & 0xf]);
1046
1047 CX18_INFO_DEV(sd, "Specified standard: %s\n",
1048 vidfmt_sel ? fmt_strs[vidfmt_sel]
1049 : "automatic detection");
1050
1051 if (vid_input >= CX18_AV_COMPOSITE1 &&
1052 vid_input <= CX18_AV_COMPOSITE8) {
1053 CX18_INFO_DEV(sd, "Specified video input: Composite %d\n",
1054 vid_input - CX18_AV_COMPOSITE1 + 1);
1055 } else {
1056 CX18_INFO_DEV(sd, "Specified video input: S-Video (Luma In%d, Chroma In%d)\n",
1057 (vid_input & 0xf0) >> 4,
1058 (vid_input & 0xf00) >> 8);
1059 }
1060
1061 CX18_INFO_DEV(sd, "Specified audioclock freq: %d Hz\n",
1062 state->audclk_freq);
1063 }
1064
log_audio_status(struct cx18 * cx)1065 static void log_audio_status(struct cx18 *cx)
1066 {
1067 struct cx18_av_state *state = &cx->av_state;
1068 struct v4l2_subdev *sd = &state->sd;
1069 u8 download_ctl = cx18_av_read(cx, 0x803);
1070 u8 mod_det_stat0 = cx18_av_read(cx, 0x804);
1071 u8 mod_det_stat1 = cx18_av_read(cx, 0x805);
1072 u8 audio_config = cx18_av_read(cx, 0x808);
1073 u8 pref_mode = cx18_av_read(cx, 0x809);
1074 u8 afc0 = cx18_av_read(cx, 0x80b);
1075 u8 mute_ctl = cx18_av_read(cx, 0x8d3);
1076 int aud_input = state->aud_input;
1077 char *p;
1078
1079 switch (mod_det_stat0) {
1080 case 0x00: p = "mono"; break;
1081 case 0x01: p = "stereo"; break;
1082 case 0x02: p = "dual"; break;
1083 case 0x04: p = "tri"; break;
1084 case 0x10: p = "mono with SAP"; break;
1085 case 0x11: p = "stereo with SAP"; break;
1086 case 0x12: p = "dual with SAP"; break;
1087 case 0x14: p = "tri with SAP"; break;
1088 case 0xfe: p = "forced mode"; break;
1089 default: p = "not defined"; break;
1090 }
1091 CX18_INFO_DEV(sd, "Detected audio mode: %s\n", p);
1092
1093 switch (mod_det_stat1) {
1094 case 0x00: p = "not defined"; break;
1095 case 0x01: p = "EIAJ"; break;
1096 case 0x02: p = "A2-M"; break;
1097 case 0x03: p = "A2-BG"; break;
1098 case 0x04: p = "A2-DK1"; break;
1099 case 0x05: p = "A2-DK2"; break;
1100 case 0x06: p = "A2-DK3"; break;
1101 case 0x07: p = "A1 (6.0 MHz FM Mono)"; break;
1102 case 0x08: p = "AM-L"; break;
1103 case 0x09: p = "NICAM-BG"; break;
1104 case 0x0a: p = "NICAM-DK"; break;
1105 case 0x0b: p = "NICAM-I"; break;
1106 case 0x0c: p = "NICAM-L"; break;
1107 case 0x0d: p = "BTSC/EIAJ/A2-M Mono (4.5 MHz FMMono)"; break;
1108 case 0x0e: p = "IF FM Radio"; break;
1109 case 0x0f: p = "BTSC"; break;
1110 case 0x10: p = "detected chrominance"; break;
1111 case 0xfd: p = "unknown audio standard"; break;
1112 case 0xfe: p = "forced audio standard"; break;
1113 case 0xff: p = "no detected audio standard"; break;
1114 default: p = "not defined"; break;
1115 }
1116 CX18_INFO_DEV(sd, "Detected audio standard: %s\n", p);
1117 CX18_INFO_DEV(sd, "Audio muted: %s\n",
1118 (mute_ctl & 0x2) ? "yes" : "no");
1119 CX18_INFO_DEV(sd, "Audio microcontroller: %s\n",
1120 (download_ctl & 0x10) ? "running" : "stopped");
1121
1122 switch (audio_config >> 4) {
1123 case 0x00: p = "undefined"; break;
1124 case 0x01: p = "BTSC"; break;
1125 case 0x02: p = "EIAJ"; break;
1126 case 0x03: p = "A2-M"; break;
1127 case 0x04: p = "A2-BG"; break;
1128 case 0x05: p = "A2-DK1"; break;
1129 case 0x06: p = "A2-DK2"; break;
1130 case 0x07: p = "A2-DK3"; break;
1131 case 0x08: p = "A1 (6.0 MHz FM Mono)"; break;
1132 case 0x09: p = "AM-L"; break;
1133 case 0x0a: p = "NICAM-BG"; break;
1134 case 0x0b: p = "NICAM-DK"; break;
1135 case 0x0c: p = "NICAM-I"; break;
1136 case 0x0d: p = "NICAM-L"; break;
1137 case 0x0e: p = "FM radio"; break;
1138 case 0x0f: p = "automatic detection"; break;
1139 default: p = "undefined"; break;
1140 }
1141 CX18_INFO_DEV(sd, "Configured audio standard: %s\n", p);
1142
1143 if ((audio_config >> 4) < 0xF) {
1144 switch (audio_config & 0xF) {
1145 case 0x00: p = "MONO1 (LANGUAGE A/Mono L+R channel for BTSC, EIAJ, A2)"; break;
1146 case 0x01: p = "MONO2 (LANGUAGE B)"; break;
1147 case 0x02: p = "MONO3 (STEREO forced MONO)"; break;
1148 case 0x03: p = "MONO4 (NICAM ANALOG-Language C/Analog Fallback)"; break;
1149 case 0x04: p = "STEREO"; break;
1150 case 0x05: p = "DUAL1 (AC)"; break;
1151 case 0x06: p = "DUAL2 (BC)"; break;
1152 case 0x07: p = "DUAL3 (AB)"; break;
1153 default: p = "undefined";
1154 }
1155 CX18_INFO_DEV(sd, "Configured audio mode: %s\n", p);
1156 } else {
1157 switch (audio_config & 0xF) {
1158 case 0x00: p = "BG"; break;
1159 case 0x01: p = "DK1"; break;
1160 case 0x02: p = "DK2"; break;
1161 case 0x03: p = "DK3"; break;
1162 case 0x04: p = "I"; break;
1163 case 0x05: p = "L"; break;
1164 case 0x06: p = "BTSC"; break;
1165 case 0x07: p = "EIAJ"; break;
1166 case 0x08: p = "A2-M"; break;
1167 case 0x09: p = "FM Radio (4.5 MHz)"; break;
1168 case 0x0a: p = "FM Radio (5.5 MHz)"; break;
1169 case 0x0b: p = "S-Video"; break;
1170 case 0x0f: p = "automatic standard and mode detection"; break;
1171 default: p = "undefined"; break;
1172 }
1173 CX18_INFO_DEV(sd, "Configured audio system: %s\n", p);
1174 }
1175
1176 if (aud_input)
1177 CX18_INFO_DEV(sd, "Specified audio input: Tuner (In%d)\n",
1178 aud_input);
1179 else
1180 CX18_INFO_DEV(sd, "Specified audio input: External\n");
1181
1182 switch (pref_mode & 0xf) {
1183 case 0: p = "mono/language A"; break;
1184 case 1: p = "language B"; break;
1185 case 2: p = "language C"; break;
1186 case 3: p = "analog fallback"; break;
1187 case 4: p = "stereo"; break;
1188 case 5: p = "language AC"; break;
1189 case 6: p = "language BC"; break;
1190 case 7: p = "language AB"; break;
1191 default: p = "undefined"; break;
1192 }
1193 CX18_INFO_DEV(sd, "Preferred audio mode: %s\n", p);
1194
1195 if ((audio_config & 0xf) == 0xf) {
1196 switch ((afc0 >> 3) & 0x1) {
1197 case 0: p = "system DK"; break;
1198 case 1: p = "system L"; break;
1199 }
1200 CX18_INFO_DEV(sd, "Selected 65 MHz format: %s\n", p);
1201
1202 switch (afc0 & 0x7) {
1203 case 0: p = "Chroma"; break;
1204 case 1: p = "BTSC"; break;
1205 case 2: p = "EIAJ"; break;
1206 case 3: p = "A2-M"; break;
1207 case 4: p = "autodetect"; break;
1208 default: p = "undefined"; break;
1209 }
1210 CX18_INFO_DEV(sd, "Selected 45 MHz format: %s\n", p);
1211 }
1212 }
1213
cx18_av_log_status(struct v4l2_subdev * sd)1214 static int cx18_av_log_status(struct v4l2_subdev *sd)
1215 {
1216 struct cx18 *cx = v4l2_get_subdevdata(sd);
1217 log_video_status(cx);
1218 log_audio_status(cx);
1219 return 0;
1220 }
1221
1222 #ifdef CONFIG_VIDEO_ADV_DEBUG
cx18_av_g_register(struct v4l2_subdev * sd,struct v4l2_dbg_register * reg)1223 static int cx18_av_g_register(struct v4l2_subdev *sd,
1224 struct v4l2_dbg_register *reg)
1225 {
1226 struct cx18 *cx = v4l2_get_subdevdata(sd);
1227
1228 if ((reg->reg & 0x3) != 0)
1229 return -EINVAL;
1230 reg->size = 4;
1231 reg->val = cx18_av_read4(cx, reg->reg & 0x00000ffc);
1232 return 0;
1233 }
1234
cx18_av_s_register(struct v4l2_subdev * sd,const struct v4l2_dbg_register * reg)1235 static int cx18_av_s_register(struct v4l2_subdev *sd,
1236 const struct v4l2_dbg_register *reg)
1237 {
1238 struct cx18 *cx = v4l2_get_subdevdata(sd);
1239
1240 if ((reg->reg & 0x3) != 0)
1241 return -EINVAL;
1242 cx18_av_write4(cx, reg->reg & 0x00000ffc, reg->val);
1243 return 0;
1244 }
1245 #endif
1246
1247 static const struct v4l2_ctrl_ops cx18_av_ctrl_ops = {
1248 .s_ctrl = cx18_av_s_ctrl,
1249 };
1250
1251 static const struct v4l2_subdev_core_ops cx18_av_general_ops = {
1252 .log_status = cx18_av_log_status,
1253 .load_fw = cx18_av_load_fw,
1254 .reset = cx18_av_reset,
1255 #ifdef CONFIG_VIDEO_ADV_DEBUG
1256 .g_register = cx18_av_g_register,
1257 .s_register = cx18_av_s_register,
1258 #endif
1259 };
1260
1261 static const struct v4l2_subdev_tuner_ops cx18_av_tuner_ops = {
1262 .s_radio = cx18_av_s_radio,
1263 .s_frequency = cx18_av_s_frequency,
1264 .g_tuner = cx18_av_g_tuner,
1265 .s_tuner = cx18_av_s_tuner,
1266 };
1267
1268 static const struct v4l2_subdev_audio_ops cx18_av_audio_ops = {
1269 .s_clock_freq = cx18_av_s_clock_freq,
1270 .s_routing = cx18_av_s_audio_routing,
1271 };
1272
1273 static const struct v4l2_subdev_video_ops cx18_av_video_ops = {
1274 .s_std = cx18_av_s_std,
1275 .s_routing = cx18_av_s_video_routing,
1276 .s_stream = cx18_av_s_stream,
1277 };
1278
1279 static const struct v4l2_subdev_vbi_ops cx18_av_vbi_ops = {
1280 .decode_vbi_line = cx18_av_decode_vbi_line,
1281 .g_sliced_fmt = cx18_av_g_sliced_fmt,
1282 .s_sliced_fmt = cx18_av_s_sliced_fmt,
1283 .s_raw_fmt = cx18_av_s_raw_fmt,
1284 };
1285
1286 static const struct v4l2_subdev_pad_ops cx18_av_pad_ops = {
1287 .set_fmt = cx18_av_set_fmt,
1288 };
1289
1290 static const struct v4l2_subdev_ops cx18_av_ops = {
1291 .core = &cx18_av_general_ops,
1292 .tuner = &cx18_av_tuner_ops,
1293 .audio = &cx18_av_audio_ops,
1294 .video = &cx18_av_video_ops,
1295 .vbi = &cx18_av_vbi_ops,
1296 .pad = &cx18_av_pad_ops,
1297 };
1298
cx18_av_probe(struct cx18 * cx)1299 int cx18_av_probe(struct cx18 *cx)
1300 {
1301 struct cx18_av_state *state = &cx->av_state;
1302 struct v4l2_subdev *sd;
1303 int err;
1304
1305 state->rev = cx18_av_read4(cx, CXADEC_CHIP_CTRL) & 0xffff;
1306
1307 state->vid_input = CX18_AV_COMPOSITE7;
1308 state->aud_input = CX18_AV_AUDIO8;
1309 state->audclk_freq = 48000;
1310 state->audmode = V4L2_TUNER_MODE_LANG1;
1311 state->slicer_line_delay = 0;
1312 state->slicer_line_offset = (10 + state->slicer_line_delay - 2);
1313
1314 sd = &state->sd;
1315 v4l2_subdev_init(sd, &cx18_av_ops);
1316 v4l2_set_subdevdata(sd, cx);
1317 snprintf(sd->name, sizeof(sd->name),
1318 "%s %03x", cx->v4l2_dev.name, (state->rev >> 4));
1319 sd->grp_id = CX18_HW_418_AV;
1320 v4l2_ctrl_handler_init(&state->hdl, 9);
1321 v4l2_ctrl_new_std(&state->hdl, &cx18_av_ctrl_ops,
1322 V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
1323 v4l2_ctrl_new_std(&state->hdl, &cx18_av_ctrl_ops,
1324 V4L2_CID_CONTRAST, 0, 127, 1, 64);
1325 v4l2_ctrl_new_std(&state->hdl, &cx18_av_ctrl_ops,
1326 V4L2_CID_SATURATION, 0, 127, 1, 64);
1327 v4l2_ctrl_new_std(&state->hdl, &cx18_av_ctrl_ops,
1328 V4L2_CID_HUE, -128, 127, 1, 0);
1329
1330 state->volume = v4l2_ctrl_new_std(&state->hdl,
1331 &cx18_av_audio_ctrl_ops, V4L2_CID_AUDIO_VOLUME,
1332 0, 65535, 65535 / 100, 0);
1333 v4l2_ctrl_new_std(&state->hdl,
1334 &cx18_av_audio_ctrl_ops, V4L2_CID_AUDIO_MUTE,
1335 0, 1, 1, 0);
1336 v4l2_ctrl_new_std(&state->hdl, &cx18_av_audio_ctrl_ops,
1337 V4L2_CID_AUDIO_BALANCE,
1338 0, 65535, 65535 / 100, 32768);
1339 v4l2_ctrl_new_std(&state->hdl, &cx18_av_audio_ctrl_ops,
1340 V4L2_CID_AUDIO_BASS,
1341 0, 65535, 65535 / 100, 32768);
1342 v4l2_ctrl_new_std(&state->hdl, &cx18_av_audio_ctrl_ops,
1343 V4L2_CID_AUDIO_TREBLE,
1344 0, 65535, 65535 / 100, 32768);
1345 sd->ctrl_handler = &state->hdl;
1346 if (state->hdl.error) {
1347 int err = state->hdl.error;
1348
1349 v4l2_ctrl_handler_free(&state->hdl);
1350 return err;
1351 }
1352 err = v4l2_device_register_subdev(&cx->v4l2_dev, sd);
1353 if (err)
1354 v4l2_ctrl_handler_free(&state->hdl);
1355 else
1356 cx18_av_init(cx);
1357 return err;
1358 }
1359