1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3
4
5 */
6
7 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
8
9 #define DRV_NAME "uli526x"
10
11 #include <linux/module.h>
12
13 #include <linux/kernel.h>
14 #include <linux/string.h>
15 #include <linux/timer.h>
16 #include <linux/errno.h>
17 #include <linux/ioport.h>
18 #include <linux/interrupt.h>
19 #include <linux/pci.h>
20 #include <linux/init.h>
21 #include <linux/netdevice.h>
22 #include <linux/etherdevice.h>
23 #include <linux/ethtool.h>
24 #include <linux/skbuff.h>
25 #include <linux/delay.h>
26 #include <linux/spinlock.h>
27 #include <linux/dma-mapping.h>
28 #include <linux/bitops.h>
29
30 #include <asm/processor.h>
31 #include <asm/io.h>
32 #include <asm/dma.h>
33 #include <linux/uaccess.h>
34
35 #define uw32(reg, val) iowrite32(val, ioaddr + (reg))
36 #define ur32(reg) ioread32(ioaddr + (reg))
37
38 /* Board/System/Debug information/definition ---------------- */
39 #define PCI_ULI5261_ID 0x526110B9 /* ULi M5261 ID*/
40 #define PCI_ULI5263_ID 0x526310B9 /* ULi M5263 ID*/
41
42 #define ULI526X_IO_SIZE 0x100
43 #define TX_DESC_CNT 0x20 /* Allocated Tx descriptors */
44 #define RX_DESC_CNT 0x30 /* Allocated Rx descriptors */
45 #define TX_FREE_DESC_CNT (TX_DESC_CNT - 2) /* Max TX packet count */
46 #define TX_WAKE_DESC_CNT (TX_DESC_CNT - 3) /* TX wakeup count */
47 #define DESC_ALL_CNT (TX_DESC_CNT + RX_DESC_CNT)
48 #define TX_BUF_ALLOC 0x600
49 #define RX_ALLOC_SIZE 0x620
50 #define ULI526X_RESET 1
51 #define CR0_DEFAULT 0
52 #define CR6_DEFAULT 0x22200000
53 #define CR7_DEFAULT 0x180c1
54 #define CR15_DEFAULT 0x06 /* TxJabber RxWatchdog */
55 #define TDES0_ERR_MASK 0x4302 /* TXJT, LC, EC, FUE */
56 #define MAX_PACKET_SIZE 1514
57 #define ULI5261_MAX_MULTICAST 14
58 #define RX_COPY_SIZE 100
59 #define MAX_CHECK_PACKET 0x8000
60
61 #define ULI526X_10MHF 0
62 #define ULI526X_100MHF 1
63 #define ULI526X_10MFD 4
64 #define ULI526X_100MFD 5
65 #define ULI526X_AUTO 8
66
67 #define ULI526X_TXTH_72 0x400000 /* TX TH 72 byte */
68 #define ULI526X_TXTH_96 0x404000 /* TX TH 96 byte */
69 #define ULI526X_TXTH_128 0x0000 /* TX TH 128 byte */
70 #define ULI526X_TXTH_256 0x4000 /* TX TH 256 byte */
71 #define ULI526X_TXTH_512 0x8000 /* TX TH 512 byte */
72 #define ULI526X_TXTH_1K 0xC000 /* TX TH 1K byte */
73
74 #define ULI526X_TIMER_WUT (jiffies + HZ * 1)/* timer wakeup time : 1 second */
75 #define ULI526X_TX_TIMEOUT ((16*HZ)/2) /* tx packet time-out time 8 s" */
76 #define ULI526X_TX_KICK (4*HZ/2) /* tx packet Kick-out time 2 s" */
77
78 #define ULI526X_DBUG(dbug_now, msg, value) \
79 do { \
80 if (uli526x_debug || (dbug_now)) \
81 pr_err("%s %lx\n", (msg), (long) (value)); \
82 } while (0)
83
84 #define SHOW_MEDIA_TYPE(mode) \
85 pr_err("Change Speed to %sMhz %s duplex\n", \
86 mode & 1 ? "100" : "10", \
87 mode & 4 ? "full" : "half");
88
89
90 /* CR9 definition: SROM/MII */
91 #define CR9_SROM_READ 0x4800
92 #define CR9_SRCS 0x1
93 #define CR9_SRCLK 0x2
94 #define CR9_CRDOUT 0x8
95 #define SROM_DATA_0 0x0
96 #define SROM_DATA_1 0x4
97 #define PHY_DATA_1 0x20000
98 #define PHY_DATA_0 0x00000
99 #define MDCLKH 0x10000
100
101 #define PHY_POWER_DOWN 0x800
102
103 #define SROM_V41_CODE 0x14
104
105 /* Structure/enum declaration ------------------------------- */
106 struct tx_desc {
107 __le32 tdes0, tdes1, tdes2, tdes3; /* Data for the card */
108 char *tx_buf_ptr; /* Data for us */
109 struct tx_desc *next_tx_desc;
110 } __attribute__(( aligned(32) ));
111
112 struct rx_desc {
113 __le32 rdes0, rdes1, rdes2, rdes3; /* Data for the card */
114 struct sk_buff *rx_skb_ptr; /* Data for us */
115 struct rx_desc *next_rx_desc;
116 } __attribute__(( aligned(32) ));
117
118 struct uli526x_board_info {
119 struct uli_phy_ops {
120 void (*write)(struct uli526x_board_info *, u8, u8, u16);
121 u16 (*read)(struct uli526x_board_info *, u8, u8);
122 } phy;
123 struct net_device *next_dev; /* next device */
124 struct pci_dev *pdev; /* PCI device */
125 spinlock_t lock;
126
127 void __iomem *ioaddr; /* I/O base address */
128 u32 cr0_data;
129 u32 cr5_data;
130 u32 cr6_data;
131 u32 cr7_data;
132 u32 cr15_data;
133
134 /* pointer for memory physical address */
135 dma_addr_t buf_pool_dma_ptr; /* Tx buffer pool memory */
136 dma_addr_t buf_pool_dma_start; /* Tx buffer pool align dword */
137 dma_addr_t desc_pool_dma_ptr; /* descriptor pool memory */
138 dma_addr_t first_tx_desc_dma;
139 dma_addr_t first_rx_desc_dma;
140
141 /* descriptor pointer */
142 unsigned char *buf_pool_ptr; /* Tx buffer pool memory */
143 unsigned char *buf_pool_start; /* Tx buffer pool align dword */
144 unsigned char *desc_pool_ptr; /* descriptor pool memory */
145 struct tx_desc *first_tx_desc;
146 struct tx_desc *tx_insert_ptr;
147 struct tx_desc *tx_remove_ptr;
148 struct rx_desc *first_rx_desc;
149 struct rx_desc *rx_insert_ptr;
150 struct rx_desc *rx_ready_ptr; /* packet come pointer */
151 unsigned long tx_packet_cnt; /* transmitted packet count */
152 unsigned long rx_avail_cnt; /* available rx descriptor count */
153 unsigned long interval_rx_cnt; /* rx packet count a callback time */
154
155 u16 dbug_cnt;
156 u16 NIC_capability; /* NIC media capability */
157 u16 PHY_reg4; /* Saved Phyxcer register 4 value */
158
159 u8 media_mode; /* user specify media mode */
160 u8 op_mode; /* real work media mode */
161 u8 phy_addr;
162 u8 link_failed; /* Ever link failed */
163 u8 wait_reset; /* Hardware failed, need to reset */
164 struct timer_list timer;
165
166 /* Driver defined statistic counter */
167 unsigned long tx_fifo_underrun;
168 unsigned long tx_loss_carrier;
169 unsigned long tx_no_carrier;
170 unsigned long tx_late_collision;
171 unsigned long tx_excessive_collision;
172 unsigned long tx_jabber_timeout;
173 unsigned long reset_count;
174 unsigned long reset_cr8;
175 unsigned long reset_fatal;
176 unsigned long reset_TXtimeout;
177
178 /* NIC SROM data */
179 unsigned char srom[128];
180 u8 init;
181 };
182
183 enum uli526x_offsets {
184 DCR0 = 0x00, DCR1 = 0x08, DCR2 = 0x10, DCR3 = 0x18, DCR4 = 0x20,
185 DCR5 = 0x28, DCR6 = 0x30, DCR7 = 0x38, DCR8 = 0x40, DCR9 = 0x48,
186 DCR10 = 0x50, DCR11 = 0x58, DCR12 = 0x60, DCR13 = 0x68, DCR14 = 0x70,
187 DCR15 = 0x78
188 };
189
190 enum uli526x_CR6_bits {
191 CR6_RXSC = 0x2, CR6_PBF = 0x8, CR6_PM = 0x40, CR6_PAM = 0x80,
192 CR6_FDM = 0x200, CR6_TXSC = 0x2000, CR6_STI = 0x100000,
193 CR6_SFT = 0x200000, CR6_RXA = 0x40000000, CR6_NO_PURGE = 0x20000000
194 };
195
196 /* Global variable declaration ----------------------------- */
197 static int uli526x_debug;
198 static unsigned char uli526x_media_mode = ULI526X_AUTO;
199 static u32 uli526x_cr6_user_set;
200
201 /* For module input parameter */
202 static int debug;
203 static u32 cr6set;
204 static int mode = 8;
205
206 /* function declaration ------------------------------------- */
207 static int uli526x_open(struct net_device *);
208 static netdev_tx_t uli526x_start_xmit(struct sk_buff *,
209 struct net_device *);
210 static int uli526x_stop(struct net_device *);
211 static void uli526x_set_filter_mode(struct net_device *);
212 static const struct ethtool_ops netdev_ethtool_ops;
213 static u16 read_srom_word(struct uli526x_board_info *, int);
214 static irqreturn_t uli526x_interrupt(int, void *);
215 #ifdef CONFIG_NET_POLL_CONTROLLER
216 static void uli526x_poll(struct net_device *dev);
217 #endif
218 static void uli526x_descriptor_init(struct net_device *, void __iomem *);
219 static void allocate_rx_buffer(struct net_device *);
220 static void update_cr6(u32, void __iomem *);
221 static void send_filter_frame(struct net_device *, int);
222 static u16 phy_readby_cr9(struct uli526x_board_info *, u8, u8);
223 static u16 phy_readby_cr10(struct uli526x_board_info *, u8, u8);
224 static void phy_writeby_cr9(struct uli526x_board_info *, u8, u8, u16);
225 static void phy_writeby_cr10(struct uli526x_board_info *, u8, u8, u16);
226 static void phy_write_1bit(struct uli526x_board_info *db, u32);
227 static u16 phy_read_1bit(struct uli526x_board_info *db);
228 static u8 uli526x_sense_speed(struct uli526x_board_info *);
229 static void uli526x_process_mode(struct uli526x_board_info *);
230 static void uli526x_timer(struct timer_list *t);
231 static void uli526x_rx_packet(struct net_device *, struct uli526x_board_info *);
232 static void uli526x_free_tx_pkt(struct net_device *, struct uli526x_board_info *);
233 static void uli526x_reuse_skb(struct uli526x_board_info *, struct sk_buff *);
234 static void uli526x_dynamic_reset(struct net_device *);
235 static void uli526x_free_rxbuffer(struct uli526x_board_info *);
236 static void uli526x_init(struct net_device *);
237 static void uli526x_set_phyxcer(struct uli526x_board_info *);
238
srom_clk_write(struct uli526x_board_info * db,u32 data)239 static void srom_clk_write(struct uli526x_board_info *db, u32 data)
240 {
241 void __iomem *ioaddr = db->ioaddr;
242
243 uw32(DCR9, data | CR9_SROM_READ | CR9_SRCS);
244 udelay(5);
245 uw32(DCR9, data | CR9_SROM_READ | CR9_SRCS | CR9_SRCLK);
246 udelay(5);
247 uw32(DCR9, data | CR9_SROM_READ | CR9_SRCS);
248 udelay(5);
249 }
250
251 /* ULI526X network board routine ---------------------------- */
252
253 static const struct net_device_ops netdev_ops = {
254 .ndo_open = uli526x_open,
255 .ndo_stop = uli526x_stop,
256 .ndo_start_xmit = uli526x_start_xmit,
257 .ndo_set_rx_mode = uli526x_set_filter_mode,
258 .ndo_set_mac_address = eth_mac_addr,
259 .ndo_validate_addr = eth_validate_addr,
260 #ifdef CONFIG_NET_POLL_CONTROLLER
261 .ndo_poll_controller = uli526x_poll,
262 #endif
263 };
264
265 /*
266 * Search ULI526X board, allocate space and register it
267 */
268
uli526x_init_one(struct pci_dev * pdev,const struct pci_device_id * ent)269 static int uli526x_init_one(struct pci_dev *pdev,
270 const struct pci_device_id *ent)
271 {
272 struct uli526x_board_info *db; /* board information structure */
273 struct net_device *dev;
274 void __iomem *ioaddr;
275 u8 addr[ETH_ALEN];
276 int i, err;
277
278 ULI526X_DBUG(0, "uli526x_init_one()", 0);
279
280 /* Init network device */
281 dev = alloc_etherdev(sizeof(*db));
282 if (dev == NULL)
283 return -ENOMEM;
284 SET_NETDEV_DEV(dev, &pdev->dev);
285
286 if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) {
287 pr_warn("32-bit PCI DMA not available\n");
288 err = -ENODEV;
289 goto err_out_free;
290 }
291
292 /* Enable Master/IO access, Disable memory access */
293 err = pci_enable_device(pdev);
294 if (err)
295 goto err_out_free;
296
297 if (!pci_resource_start(pdev, 0)) {
298 pr_err("I/O base is zero\n");
299 err = -ENODEV;
300 goto err_out_disable;
301 }
302
303 if (pci_resource_len(pdev, 0) < (ULI526X_IO_SIZE) ) {
304 pr_err("Allocated I/O size too small\n");
305 err = -ENODEV;
306 goto err_out_disable;
307 }
308
309 err = pci_request_regions(pdev, DRV_NAME);
310 if (err < 0) {
311 pr_err("Failed to request PCI regions\n");
312 goto err_out_disable;
313 }
314
315 /* Init system & device */
316 db = netdev_priv(dev);
317
318 /* Allocate Tx/Rx descriptor memory */
319 err = -ENOMEM;
320
321 db->desc_pool_ptr = dma_alloc_coherent(&pdev->dev,
322 sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20,
323 &db->desc_pool_dma_ptr, GFP_KERNEL);
324 if (!db->desc_pool_ptr)
325 goto err_out_release;
326
327 db->buf_pool_ptr = dma_alloc_coherent(&pdev->dev,
328 TX_BUF_ALLOC * TX_DESC_CNT + 4,
329 &db->buf_pool_dma_ptr, GFP_KERNEL);
330 if (!db->buf_pool_ptr)
331 goto err_out_free_tx_desc;
332
333 db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr;
334 db->first_tx_desc_dma = db->desc_pool_dma_ptr;
335 db->buf_pool_start = db->buf_pool_ptr;
336 db->buf_pool_dma_start = db->buf_pool_dma_ptr;
337
338 switch (ent->driver_data) {
339 case PCI_ULI5263_ID:
340 db->phy.write = phy_writeby_cr10;
341 db->phy.read = phy_readby_cr10;
342 break;
343 default:
344 db->phy.write = phy_writeby_cr9;
345 db->phy.read = phy_readby_cr9;
346 break;
347 }
348
349 /* IO region. */
350 ioaddr = pci_iomap(pdev, 0, 0);
351 if (!ioaddr)
352 goto err_out_free_tx_buf;
353
354 db->ioaddr = ioaddr;
355 db->pdev = pdev;
356 db->init = 1;
357
358 pci_set_drvdata(pdev, dev);
359
360 /* Register some necessary functions */
361 dev->netdev_ops = &netdev_ops;
362 dev->ethtool_ops = &netdev_ethtool_ops;
363
364 spin_lock_init(&db->lock);
365
366
367 /* read 64 word srom data */
368 for (i = 0; i < 64; i++)
369 ((__le16 *) db->srom)[i] = cpu_to_le16(read_srom_word(db, i));
370
371 /* Set Node address */
372 if(((u16 *) db->srom)[0] == 0xffff || ((u16 *) db->srom)[0] == 0) /* SROM absent, so read MAC address from ID Table */
373 {
374 uw32(DCR0, 0x10000); //Diagnosis mode
375 uw32(DCR13, 0x1c0); //Reset dianostic pointer port
376 uw32(DCR14, 0); //Clear reset port
377 uw32(DCR14, 0x10); //Reset ID Table pointer
378 uw32(DCR14, 0); //Clear reset port
379 uw32(DCR13, 0); //Clear CR13
380 uw32(DCR13, 0x1b0); //Select ID Table access port
381 //Read MAC address from CR14
382 for (i = 0; i < 6; i++)
383 addr[i] = ur32(DCR14);
384 //Read end
385 uw32(DCR13, 0); //Clear CR13
386 uw32(DCR0, 0); //Clear CR0
387 udelay(10);
388 }
389 else /*Exist SROM*/
390 {
391 for (i = 0; i < 6; i++)
392 addr[i] = db->srom[20 + i];
393 }
394 eth_hw_addr_set(dev, addr);
395
396 err = register_netdev (dev);
397 if (err)
398 goto err_out_unmap;
399
400 netdev_info(dev, "ULi M%04lx at pci%s, %pM, irq %d\n",
401 ent->driver_data >> 16, pci_name(pdev),
402 dev->dev_addr, pdev->irq);
403
404 pci_set_master(pdev);
405
406 return 0;
407
408 err_out_unmap:
409 pci_iounmap(pdev, db->ioaddr);
410 err_out_free_tx_buf:
411 dma_free_coherent(&pdev->dev, TX_BUF_ALLOC * TX_DESC_CNT + 4,
412 db->buf_pool_ptr, db->buf_pool_dma_ptr);
413 err_out_free_tx_desc:
414 dma_free_coherent(&pdev->dev,
415 sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20,
416 db->desc_pool_ptr, db->desc_pool_dma_ptr);
417 err_out_release:
418 pci_release_regions(pdev);
419 err_out_disable:
420 pci_disable_device(pdev);
421 err_out_free:
422 free_netdev(dev);
423
424 return err;
425 }
426
427
uli526x_remove_one(struct pci_dev * pdev)428 static void uli526x_remove_one(struct pci_dev *pdev)
429 {
430 struct net_device *dev = pci_get_drvdata(pdev);
431 struct uli526x_board_info *db = netdev_priv(dev);
432
433 unregister_netdev(dev);
434 pci_iounmap(pdev, db->ioaddr);
435 dma_free_coherent(&db->pdev->dev,
436 sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20,
437 db->desc_pool_ptr, db->desc_pool_dma_ptr);
438 dma_free_coherent(&db->pdev->dev, TX_BUF_ALLOC * TX_DESC_CNT + 4,
439 db->buf_pool_ptr, db->buf_pool_dma_ptr);
440 pci_release_regions(pdev);
441 pci_disable_device(pdev);
442 free_netdev(dev);
443 }
444
445
446 /*
447 * Open the interface.
448 * The interface is opened whenever "ifconfig" activates it.
449 */
450
uli526x_open(struct net_device * dev)451 static int uli526x_open(struct net_device *dev)
452 {
453 int ret;
454 struct uli526x_board_info *db = netdev_priv(dev);
455
456 ULI526X_DBUG(0, "uli526x_open", 0);
457
458 /* system variable init */
459 db->cr6_data = CR6_DEFAULT | uli526x_cr6_user_set;
460 db->tx_packet_cnt = 0;
461 db->rx_avail_cnt = 0;
462 db->link_failed = 1;
463 netif_carrier_off(dev);
464 db->wait_reset = 0;
465
466 db->NIC_capability = 0xf; /* All capability*/
467 db->PHY_reg4 = 0x1e0;
468
469 /* CR6 operation mode decision */
470 db->cr6_data |= ULI526X_TXTH_256;
471 db->cr0_data = CR0_DEFAULT;
472
473 /* Initialize ULI526X board */
474 uli526x_init(dev);
475
476 ret = request_irq(db->pdev->irq, uli526x_interrupt, IRQF_SHARED,
477 dev->name, dev);
478 if (ret)
479 return ret;
480
481 /* Active System Interface */
482 netif_wake_queue(dev);
483
484 /* set and active a timer process */
485 timer_setup(&db->timer, uli526x_timer, 0);
486 db->timer.expires = ULI526X_TIMER_WUT + HZ * 2;
487 add_timer(&db->timer);
488
489 return 0;
490 }
491
492
493 /* Initialize ULI526X board
494 * Reset ULI526X board
495 * Initialize TX/Rx descriptor chain structure
496 * Send the set-up frame
497 * Enable Tx/Rx machine
498 */
499
uli526x_init(struct net_device * dev)500 static void uli526x_init(struct net_device *dev)
501 {
502 struct uli526x_board_info *db = netdev_priv(dev);
503 struct uli_phy_ops *phy = &db->phy;
504 void __iomem *ioaddr = db->ioaddr;
505 u8 phy_tmp;
506 u8 timeout;
507 u16 phy_reg_reset;
508
509
510 ULI526X_DBUG(0, "uli526x_init()", 0);
511
512 /* Reset M526x MAC controller */
513 uw32(DCR0, ULI526X_RESET); /* RESET MAC */
514 udelay(100);
515 uw32(DCR0, db->cr0_data);
516 udelay(5);
517
518 /* Phy addr : In some boards,M5261/M5263 phy address != 1 */
519 db->phy_addr = 1;
520 for (phy_tmp = 0; phy_tmp < 32; phy_tmp++) {
521 u16 phy_value;
522
523 phy_value = phy->read(db, phy_tmp, 3); //peer add
524 if (phy_value != 0xffff && phy_value != 0) {
525 db->phy_addr = phy_tmp;
526 break;
527 }
528 }
529
530 if (phy_tmp == 32)
531 pr_warn("Can not find the phy address!!!\n");
532 /* Parser SROM and media mode */
533 db->media_mode = uli526x_media_mode;
534
535 /* phyxcer capability setting */
536 phy_reg_reset = phy->read(db, db->phy_addr, 0);
537 phy_reg_reset = (phy_reg_reset | 0x8000);
538 phy->write(db, db->phy_addr, 0, phy_reg_reset);
539
540 /* See IEEE 802.3-2002.pdf (Section 2, Chapter "22.2.4 Management
541 * functions") or phy data sheet for details on phy reset
542 */
543 udelay(500);
544 timeout = 10;
545 while (timeout-- && phy->read(db, db->phy_addr, 0) & 0x8000)
546 udelay(100);
547
548 /* Process Phyxcer Media Mode */
549 uli526x_set_phyxcer(db);
550
551 /* Media Mode Process */
552 if ( !(db->media_mode & ULI526X_AUTO) )
553 db->op_mode = db->media_mode; /* Force Mode */
554
555 /* Initialize Transmit/Receive descriptor and CR3/4 */
556 uli526x_descriptor_init(dev, ioaddr);
557
558 /* Init CR6 to program M526X operation */
559 update_cr6(db->cr6_data, ioaddr);
560
561 /* Send setup frame */
562 send_filter_frame(dev, netdev_mc_count(dev)); /* M5261/M5263 */
563
564 /* Init CR7, interrupt active bit */
565 db->cr7_data = CR7_DEFAULT;
566 uw32(DCR7, db->cr7_data);
567
568 /* Init CR15, Tx jabber and Rx watchdog timer */
569 uw32(DCR15, db->cr15_data);
570
571 /* Enable ULI526X Tx/Rx function */
572 db->cr6_data |= CR6_RXSC | CR6_TXSC;
573 update_cr6(db->cr6_data, ioaddr);
574 }
575
576
577 /*
578 * Hardware start transmission.
579 * Send a packet to media from the upper layer.
580 */
581
uli526x_start_xmit(struct sk_buff * skb,struct net_device * dev)582 static netdev_tx_t uli526x_start_xmit(struct sk_buff *skb,
583 struct net_device *dev)
584 {
585 struct uli526x_board_info *db = netdev_priv(dev);
586 void __iomem *ioaddr = db->ioaddr;
587 struct tx_desc *txptr;
588 unsigned long flags;
589
590 ULI526X_DBUG(0, "uli526x_start_xmit", 0);
591
592 /* Resource flag check */
593 netif_stop_queue(dev);
594
595 /* Too large packet check */
596 if (skb->len > MAX_PACKET_SIZE) {
597 netdev_err(dev, "big packet = %d\n", (u16)skb->len);
598 dev_kfree_skb_any(skb);
599 return NETDEV_TX_OK;
600 }
601
602 spin_lock_irqsave(&db->lock, flags);
603
604 /* No Tx resource check, it never happen nromally */
605 if (db->tx_packet_cnt >= TX_FREE_DESC_CNT) {
606 spin_unlock_irqrestore(&db->lock, flags);
607 netdev_err(dev, "No Tx resource %ld\n", db->tx_packet_cnt);
608 return NETDEV_TX_BUSY;
609 }
610
611 /* Disable NIC interrupt */
612 uw32(DCR7, 0);
613
614 /* transmit this packet */
615 txptr = db->tx_insert_ptr;
616 skb_copy_from_linear_data(skb, txptr->tx_buf_ptr, skb->len);
617 txptr->tdes1 = cpu_to_le32(0xe1000000 | skb->len);
618
619 /* Point to next transmit free descriptor */
620 db->tx_insert_ptr = txptr->next_tx_desc;
621
622 /* Transmit Packet Process */
623 if (db->tx_packet_cnt < TX_DESC_CNT) {
624 txptr->tdes0 = cpu_to_le32(0x80000000); /* Set owner bit */
625 db->tx_packet_cnt++; /* Ready to send */
626 uw32(DCR1, 0x1); /* Issue Tx polling */
627 netif_trans_update(dev); /* saved time stamp */
628 }
629
630 /* Tx resource check */
631 if ( db->tx_packet_cnt < TX_FREE_DESC_CNT )
632 netif_wake_queue(dev);
633
634 /* Restore CR7 to enable interrupt */
635 spin_unlock_irqrestore(&db->lock, flags);
636 uw32(DCR7, db->cr7_data);
637
638 /* free this SKB */
639 dev_consume_skb_any(skb);
640
641 return NETDEV_TX_OK;
642 }
643
644
645 /*
646 * Stop the interface.
647 * The interface is stopped when it is brought.
648 */
649
uli526x_stop(struct net_device * dev)650 static int uli526x_stop(struct net_device *dev)
651 {
652 struct uli526x_board_info *db = netdev_priv(dev);
653 void __iomem *ioaddr = db->ioaddr;
654
655 /* disable system */
656 netif_stop_queue(dev);
657
658 /* deleted timer */
659 del_timer_sync(&db->timer);
660
661 /* Reset & stop ULI526X board */
662 uw32(DCR0, ULI526X_RESET);
663 udelay(5);
664 db->phy.write(db, db->phy_addr, 0, 0x8000);
665
666 /* free interrupt */
667 free_irq(db->pdev->irq, dev);
668
669 /* free allocated rx buffer */
670 uli526x_free_rxbuffer(db);
671
672 return 0;
673 }
674
675
676 /*
677 * M5261/M5263 insterrupt handler
678 * receive the packet to upper layer, free the transmitted packet
679 */
680
uli526x_interrupt(int irq,void * dev_id)681 static irqreturn_t uli526x_interrupt(int irq, void *dev_id)
682 {
683 struct net_device *dev = dev_id;
684 struct uli526x_board_info *db = netdev_priv(dev);
685 void __iomem *ioaddr = db->ioaddr;
686 unsigned long flags;
687
688 spin_lock_irqsave(&db->lock, flags);
689 uw32(DCR7, 0);
690
691 /* Got ULI526X status */
692 db->cr5_data = ur32(DCR5);
693 uw32(DCR5, db->cr5_data);
694 if ( !(db->cr5_data & 0x180c1) ) {
695 /* Restore CR7 to enable interrupt mask */
696 uw32(DCR7, db->cr7_data);
697 spin_unlock_irqrestore(&db->lock, flags);
698 return IRQ_HANDLED;
699 }
700
701 /* Check system status */
702 if (db->cr5_data & 0x2000) {
703 /* system bus error happen */
704 ULI526X_DBUG(1, "System bus error happen. CR5=", db->cr5_data);
705 db->reset_fatal++;
706 db->wait_reset = 1; /* Need to RESET */
707 spin_unlock_irqrestore(&db->lock, flags);
708 return IRQ_HANDLED;
709 }
710
711 /* Received the coming packet */
712 if ( (db->cr5_data & 0x40) && db->rx_avail_cnt )
713 uli526x_rx_packet(dev, db);
714
715 /* reallocate rx descriptor buffer */
716 if (db->rx_avail_cnt<RX_DESC_CNT)
717 allocate_rx_buffer(dev);
718
719 /* Free the transmitted descriptor */
720 if ( db->cr5_data & 0x01)
721 uli526x_free_tx_pkt(dev, db);
722
723 /* Restore CR7 to enable interrupt mask */
724 uw32(DCR7, db->cr7_data);
725
726 spin_unlock_irqrestore(&db->lock, flags);
727 return IRQ_HANDLED;
728 }
729
730 #ifdef CONFIG_NET_POLL_CONTROLLER
uli526x_poll(struct net_device * dev)731 static void uli526x_poll(struct net_device *dev)
732 {
733 struct uli526x_board_info *db = netdev_priv(dev);
734
735 /* ISR grabs the irqsave lock, so this should be safe */
736 uli526x_interrupt(db->pdev->irq, dev);
737 }
738 #endif
739
740 /*
741 * Free TX resource after TX complete
742 */
743
uli526x_free_tx_pkt(struct net_device * dev,struct uli526x_board_info * db)744 static void uli526x_free_tx_pkt(struct net_device *dev,
745 struct uli526x_board_info * db)
746 {
747 struct tx_desc *txptr;
748 u32 tdes0;
749
750 txptr = db->tx_remove_ptr;
751 while(db->tx_packet_cnt) {
752 tdes0 = le32_to_cpu(txptr->tdes0);
753 if (tdes0 & 0x80000000)
754 break;
755
756 /* A packet sent completed */
757 db->tx_packet_cnt--;
758 dev->stats.tx_packets++;
759
760 /* Transmit statistic counter */
761 if ( tdes0 != 0x7fffffff ) {
762 dev->stats.collisions += (tdes0 >> 3) & 0xf;
763 dev->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff;
764 if (tdes0 & TDES0_ERR_MASK) {
765 dev->stats.tx_errors++;
766 if (tdes0 & 0x0002) { /* UnderRun */
767 db->tx_fifo_underrun++;
768 if ( !(db->cr6_data & CR6_SFT) ) {
769 db->cr6_data = db->cr6_data | CR6_SFT;
770 update_cr6(db->cr6_data, db->ioaddr);
771 }
772 }
773 if (tdes0 & 0x0100)
774 db->tx_excessive_collision++;
775 if (tdes0 & 0x0200)
776 db->tx_late_collision++;
777 if (tdes0 & 0x0400)
778 db->tx_no_carrier++;
779 if (tdes0 & 0x0800)
780 db->tx_loss_carrier++;
781 if (tdes0 & 0x4000)
782 db->tx_jabber_timeout++;
783 }
784 }
785
786 txptr = txptr->next_tx_desc;
787 }/* End of while */
788
789 /* Update TX remove pointer to next */
790 db->tx_remove_ptr = txptr;
791
792 /* Resource available check */
793 if ( db->tx_packet_cnt < TX_WAKE_DESC_CNT )
794 netif_wake_queue(dev); /* Active upper layer, send again */
795 }
796
797
798 /*
799 * Receive the come packet and pass to upper layer
800 */
801
uli526x_rx_packet(struct net_device * dev,struct uli526x_board_info * db)802 static void uli526x_rx_packet(struct net_device *dev, struct uli526x_board_info * db)
803 {
804 struct rx_desc *rxptr;
805 struct sk_buff *skb;
806 int rxlen;
807 u32 rdes0;
808
809 rxptr = db->rx_ready_ptr;
810
811 while(db->rx_avail_cnt) {
812 rdes0 = le32_to_cpu(rxptr->rdes0);
813 if (rdes0 & 0x80000000) /* packet owner check */
814 {
815 break;
816 }
817
818 db->rx_avail_cnt--;
819 db->interval_rx_cnt++;
820
821 dma_unmap_single(&db->pdev->dev, le32_to_cpu(rxptr->rdes2),
822 RX_ALLOC_SIZE, DMA_FROM_DEVICE);
823 if ( (rdes0 & 0x300) != 0x300) {
824 /* A packet without First/Last flag */
825 /* reuse this SKB */
826 ULI526X_DBUG(0, "Reuse SK buffer, rdes0", rdes0);
827 uli526x_reuse_skb(db, rxptr->rx_skb_ptr);
828 } else {
829 /* A packet with First/Last flag */
830 rxlen = ( (rdes0 >> 16) & 0x3fff) - 4;
831
832 /* error summary bit check */
833 if (rdes0 & 0x8000) {
834 /* This is a error packet */
835 dev->stats.rx_errors++;
836 if (rdes0 & 1)
837 dev->stats.rx_fifo_errors++;
838 if (rdes0 & 2)
839 dev->stats.rx_crc_errors++;
840 if (rdes0 & 0x80)
841 dev->stats.rx_length_errors++;
842 }
843
844 if ( !(rdes0 & 0x8000) ||
845 ((db->cr6_data & CR6_PM) && (rxlen>6)) ) {
846 struct sk_buff *new_skb = NULL;
847
848 skb = rxptr->rx_skb_ptr;
849
850 /* Good packet, send to upper layer */
851 /* Shorst packet used new SKB */
852 if ((rxlen < RX_COPY_SIZE) &&
853 (((new_skb = netdev_alloc_skb(dev, rxlen + 2)) != NULL))) {
854 skb = new_skb;
855 /* size less than COPY_SIZE, allocate a rxlen SKB */
856 skb_reserve(skb, 2); /* 16byte align */
857 skb_put_data(skb,
858 skb_tail_pointer(rxptr->rx_skb_ptr),
859 rxlen);
860 uli526x_reuse_skb(db, rxptr->rx_skb_ptr);
861 } else
862 skb_put(skb, rxlen);
863
864 skb->protocol = eth_type_trans(skb, dev);
865 netif_rx(skb);
866 dev->stats.rx_packets++;
867 dev->stats.rx_bytes += rxlen;
868
869 } else {
870 /* Reuse SKB buffer when the packet is error */
871 ULI526X_DBUG(0, "Reuse SK buffer, rdes0", rdes0);
872 uli526x_reuse_skb(db, rxptr->rx_skb_ptr);
873 }
874 }
875
876 rxptr = rxptr->next_rx_desc;
877 }
878
879 db->rx_ready_ptr = rxptr;
880 }
881
882
883 /*
884 * Set ULI526X multicast address
885 */
886
uli526x_set_filter_mode(struct net_device * dev)887 static void uli526x_set_filter_mode(struct net_device * dev)
888 {
889 struct uli526x_board_info *db = netdev_priv(dev);
890 unsigned long flags;
891
892 ULI526X_DBUG(0, "uli526x_set_filter_mode()", 0);
893 spin_lock_irqsave(&db->lock, flags);
894
895 if (dev->flags & IFF_PROMISC) {
896 ULI526X_DBUG(0, "Enable PROM Mode", 0);
897 db->cr6_data |= CR6_PM | CR6_PBF;
898 update_cr6(db->cr6_data, db->ioaddr);
899 spin_unlock_irqrestore(&db->lock, flags);
900 return;
901 }
902
903 if (dev->flags & IFF_ALLMULTI ||
904 netdev_mc_count(dev) > ULI5261_MAX_MULTICAST) {
905 ULI526X_DBUG(0, "Pass all multicast address",
906 netdev_mc_count(dev));
907 db->cr6_data &= ~(CR6_PM | CR6_PBF);
908 db->cr6_data |= CR6_PAM;
909 spin_unlock_irqrestore(&db->lock, flags);
910 return;
911 }
912
913 ULI526X_DBUG(0, "Set multicast address", netdev_mc_count(dev));
914 send_filter_frame(dev, netdev_mc_count(dev)); /* M5261/M5263 */
915 spin_unlock_irqrestore(&db->lock, flags);
916 }
917
918 static void
ULi_ethtool_get_link_ksettings(struct uli526x_board_info * db,struct ethtool_link_ksettings * cmd)919 ULi_ethtool_get_link_ksettings(struct uli526x_board_info *db,
920 struct ethtool_link_ksettings *cmd)
921 {
922 u32 supported, advertising;
923
924 supported = (SUPPORTED_10baseT_Half |
925 SUPPORTED_10baseT_Full |
926 SUPPORTED_100baseT_Half |
927 SUPPORTED_100baseT_Full |
928 SUPPORTED_Autoneg |
929 SUPPORTED_MII);
930
931 advertising = (ADVERTISED_10baseT_Half |
932 ADVERTISED_10baseT_Full |
933 ADVERTISED_100baseT_Half |
934 ADVERTISED_100baseT_Full |
935 ADVERTISED_Autoneg |
936 ADVERTISED_MII);
937
938 ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
939 supported);
940 ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
941 advertising);
942
943 cmd->base.port = PORT_MII;
944 cmd->base.phy_address = db->phy_addr;
945
946 cmd->base.speed = SPEED_10;
947 cmd->base.duplex = DUPLEX_HALF;
948
949 if(db->op_mode==ULI526X_100MHF || db->op_mode==ULI526X_100MFD)
950 {
951 cmd->base.speed = SPEED_100;
952 }
953 if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD)
954 {
955 cmd->base.duplex = DUPLEX_FULL;
956 }
957 if(db->link_failed)
958 {
959 cmd->base.speed = SPEED_UNKNOWN;
960 cmd->base.duplex = DUPLEX_UNKNOWN;
961 }
962
963 if (db->media_mode & ULI526X_AUTO)
964 {
965 cmd->base.autoneg = AUTONEG_ENABLE;
966 }
967 }
968
netdev_get_drvinfo(struct net_device * dev,struct ethtool_drvinfo * info)969 static void netdev_get_drvinfo(struct net_device *dev,
970 struct ethtool_drvinfo *info)
971 {
972 struct uli526x_board_info *np = netdev_priv(dev);
973
974 strscpy(info->driver, DRV_NAME, sizeof(info->driver));
975 strscpy(info->bus_info, pci_name(np->pdev), sizeof(info->bus_info));
976 }
977
netdev_get_link_ksettings(struct net_device * dev,struct ethtool_link_ksettings * cmd)978 static int netdev_get_link_ksettings(struct net_device *dev,
979 struct ethtool_link_ksettings *cmd)
980 {
981 struct uli526x_board_info *np = netdev_priv(dev);
982
983 ULi_ethtool_get_link_ksettings(np, cmd);
984
985 return 0;
986 }
987
netdev_get_link(struct net_device * dev)988 static u32 netdev_get_link(struct net_device *dev) {
989 struct uli526x_board_info *np = netdev_priv(dev);
990
991 if(np->link_failed)
992 return 0;
993 else
994 return 1;
995 }
996
uli526x_get_wol(struct net_device * dev,struct ethtool_wolinfo * wol)997 static void uli526x_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
998 {
999 wol->supported = WAKE_PHY | WAKE_MAGIC;
1000 wol->wolopts = 0;
1001 }
1002
1003 static const struct ethtool_ops netdev_ethtool_ops = {
1004 .get_drvinfo = netdev_get_drvinfo,
1005 .get_link = netdev_get_link,
1006 .get_wol = uli526x_get_wol,
1007 .get_link_ksettings = netdev_get_link_ksettings,
1008 };
1009
1010 /*
1011 * A periodic timer routine
1012 * Dynamic media sense, allocate Rx buffer...
1013 */
1014
uli526x_timer(struct timer_list * t)1015 static void uli526x_timer(struct timer_list *t)
1016 {
1017 struct uli526x_board_info *db = from_timer(db, t, timer);
1018 struct net_device *dev = pci_get_drvdata(db->pdev);
1019 struct uli_phy_ops *phy = &db->phy;
1020 void __iomem *ioaddr = db->ioaddr;
1021 unsigned long flags;
1022 u8 tmp_cr12 = 0;
1023 u32 tmp_cr8;
1024
1025 //ULI526X_DBUG(0, "uli526x_timer()", 0);
1026 spin_lock_irqsave(&db->lock, flags);
1027
1028
1029 /* Dynamic reset ULI526X : system error or transmit time-out */
1030 tmp_cr8 = ur32(DCR8);
1031 if ( (db->interval_rx_cnt==0) && (tmp_cr8) ) {
1032 db->reset_cr8++;
1033 db->wait_reset = 1;
1034 }
1035 db->interval_rx_cnt = 0;
1036
1037 /* TX polling kick monitor */
1038 if ( db->tx_packet_cnt &&
1039 time_after(jiffies, dev_trans_start(dev) + ULI526X_TX_KICK) ) {
1040 uw32(DCR1, 0x1); // Tx polling again
1041
1042 // TX Timeout
1043 if ( time_after(jiffies, dev_trans_start(dev) + ULI526X_TX_TIMEOUT) ) {
1044 db->reset_TXtimeout++;
1045 db->wait_reset = 1;
1046 netdev_err(dev, " Tx timeout - resetting\n");
1047 }
1048 }
1049
1050 if (db->wait_reset) {
1051 ULI526X_DBUG(0, "Dynamic Reset device", db->tx_packet_cnt);
1052 db->reset_count++;
1053 uli526x_dynamic_reset(dev);
1054 db->timer.expires = ULI526X_TIMER_WUT;
1055 add_timer(&db->timer);
1056 spin_unlock_irqrestore(&db->lock, flags);
1057 return;
1058 }
1059
1060 /* Link status check, Dynamic media type change */
1061 if ((phy->read(db, db->phy_addr, 5) & 0x01e0)!=0)
1062 tmp_cr12 = 3;
1063
1064 if ( !(tmp_cr12 & 0x3) && !db->link_failed ) {
1065 /* Link Failed */
1066 ULI526X_DBUG(0, "Link Failed", tmp_cr12);
1067 netif_carrier_off(dev);
1068 netdev_info(dev, "NIC Link is Down\n");
1069 db->link_failed = 1;
1070
1071 /* For Force 10/100M Half/Full mode: Enable Auto-Nego mode */
1072 /* AUTO don't need */
1073 if ( !(db->media_mode & 0x8) )
1074 phy->write(db, db->phy_addr, 0, 0x1000);
1075
1076 /* AUTO mode, if INT phyxcer link failed, select EXT device */
1077 if (db->media_mode & ULI526X_AUTO) {
1078 db->cr6_data&=~0x00000200; /* bit9=0, HD mode */
1079 update_cr6(db->cr6_data, db->ioaddr);
1080 }
1081 } else
1082 if ((tmp_cr12 & 0x3) && db->link_failed) {
1083 ULI526X_DBUG(0, "Link link OK", tmp_cr12);
1084 db->link_failed = 0;
1085
1086 /* Auto Sense Speed */
1087 if ( (db->media_mode & ULI526X_AUTO) &&
1088 uli526x_sense_speed(db) )
1089 db->link_failed = 1;
1090 uli526x_process_mode(db);
1091
1092 if(db->link_failed==0)
1093 {
1094 netdev_info(dev, "NIC Link is Up %d Mbps %s duplex\n",
1095 (db->op_mode == ULI526X_100MHF ||
1096 db->op_mode == ULI526X_100MFD)
1097 ? 100 : 10,
1098 (db->op_mode == ULI526X_10MFD ||
1099 db->op_mode == ULI526X_100MFD)
1100 ? "Full" : "Half");
1101 netif_carrier_on(dev);
1102 }
1103 /* SHOW_MEDIA_TYPE(db->op_mode); */
1104 }
1105 else if(!(tmp_cr12 & 0x3) && db->link_failed)
1106 {
1107 if(db->init==1)
1108 {
1109 netdev_info(dev, "NIC Link is Down\n");
1110 netif_carrier_off(dev);
1111 }
1112 }
1113 db->init = 0;
1114
1115 /* Timer active again */
1116 db->timer.expires = ULI526X_TIMER_WUT;
1117 add_timer(&db->timer);
1118 spin_unlock_irqrestore(&db->lock, flags);
1119 }
1120
1121
1122 /*
1123 * Stop ULI526X board
1124 * Free Tx/Rx allocated memory
1125 * Init system variable
1126 */
1127
uli526x_reset_prepare(struct net_device * dev)1128 static void uli526x_reset_prepare(struct net_device *dev)
1129 {
1130 struct uli526x_board_info *db = netdev_priv(dev);
1131 void __iomem *ioaddr = db->ioaddr;
1132
1133 /* Sopt MAC controller */
1134 db->cr6_data &= ~(CR6_RXSC | CR6_TXSC); /* Disable Tx/Rx */
1135 update_cr6(db->cr6_data, ioaddr);
1136 uw32(DCR7, 0); /* Disable Interrupt */
1137 uw32(DCR5, ur32(DCR5));
1138
1139 /* Disable upper layer interface */
1140 netif_stop_queue(dev);
1141
1142 /* Free Rx Allocate buffer */
1143 uli526x_free_rxbuffer(db);
1144
1145 /* system variable init */
1146 db->tx_packet_cnt = 0;
1147 db->rx_avail_cnt = 0;
1148 db->link_failed = 1;
1149 db->init=1;
1150 db->wait_reset = 0;
1151 }
1152
1153
1154 /*
1155 * Dynamic reset the ULI526X board
1156 * Stop ULI526X board
1157 * Free Tx/Rx allocated memory
1158 * Reset ULI526X board
1159 * Re-initialize ULI526X board
1160 */
1161
uli526x_dynamic_reset(struct net_device * dev)1162 static void uli526x_dynamic_reset(struct net_device *dev)
1163 {
1164 ULI526X_DBUG(0, "uli526x_dynamic_reset()", 0);
1165
1166 uli526x_reset_prepare(dev);
1167
1168 /* Re-initialize ULI526X board */
1169 uli526x_init(dev);
1170
1171 /* Restart upper layer interface */
1172 netif_wake_queue(dev);
1173 }
1174
1175 /*
1176 * Suspend the interface.
1177 */
1178
uli526x_suspend(struct device * dev_d)1179 static int __maybe_unused uli526x_suspend(struct device *dev_d)
1180 {
1181 struct net_device *dev = dev_get_drvdata(dev_d);
1182
1183 ULI526X_DBUG(0, "uli526x_suspend", 0);
1184
1185 if (!netif_running(dev))
1186 return 0;
1187
1188 netif_device_detach(dev);
1189 uli526x_reset_prepare(dev);
1190
1191 device_set_wakeup_enable(dev_d, 0);
1192
1193 return 0;
1194 }
1195
1196 /*
1197 * Resume the interface.
1198 */
1199
uli526x_resume(struct device * dev_d)1200 static int __maybe_unused uli526x_resume(struct device *dev_d)
1201 {
1202 struct net_device *dev = dev_get_drvdata(dev_d);
1203
1204 ULI526X_DBUG(0, "uli526x_resume", 0);
1205
1206
1207 if (!netif_running(dev))
1208 return 0;
1209
1210 netif_device_attach(dev);
1211 /* Re-initialize ULI526X board */
1212 uli526x_init(dev);
1213 /* Restart upper layer interface */
1214 netif_wake_queue(dev);
1215
1216 return 0;
1217 }
1218
1219 /*
1220 * free all allocated rx buffer
1221 */
1222
uli526x_free_rxbuffer(struct uli526x_board_info * db)1223 static void uli526x_free_rxbuffer(struct uli526x_board_info * db)
1224 {
1225 ULI526X_DBUG(0, "uli526x_free_rxbuffer()", 0);
1226
1227 /* free allocated rx buffer */
1228 while (db->rx_avail_cnt) {
1229 dev_kfree_skb(db->rx_ready_ptr->rx_skb_ptr);
1230 db->rx_ready_ptr = db->rx_ready_ptr->next_rx_desc;
1231 db->rx_avail_cnt--;
1232 }
1233 }
1234
1235
1236 /*
1237 * Reuse the SK buffer
1238 */
1239
uli526x_reuse_skb(struct uli526x_board_info * db,struct sk_buff * skb)1240 static void uli526x_reuse_skb(struct uli526x_board_info *db, struct sk_buff * skb)
1241 {
1242 struct rx_desc *rxptr = db->rx_insert_ptr;
1243
1244 if (!(rxptr->rdes0 & cpu_to_le32(0x80000000))) {
1245 rxptr->rx_skb_ptr = skb;
1246 rxptr->rdes2 = cpu_to_le32(dma_map_single(&db->pdev->dev, skb_tail_pointer(skb),
1247 RX_ALLOC_SIZE, DMA_FROM_DEVICE));
1248 wmb();
1249 rxptr->rdes0 = cpu_to_le32(0x80000000);
1250 db->rx_avail_cnt++;
1251 db->rx_insert_ptr = rxptr->next_rx_desc;
1252 } else
1253 ULI526X_DBUG(0, "SK Buffer reuse method error", db->rx_avail_cnt);
1254 }
1255
1256
1257 /*
1258 * Initialize transmit/Receive descriptor
1259 * Using Chain structure, and allocate Tx/Rx buffer
1260 */
1261
uli526x_descriptor_init(struct net_device * dev,void __iomem * ioaddr)1262 static void uli526x_descriptor_init(struct net_device *dev, void __iomem *ioaddr)
1263 {
1264 struct uli526x_board_info *db = netdev_priv(dev);
1265 struct tx_desc *tmp_tx;
1266 struct rx_desc *tmp_rx;
1267 unsigned char *tmp_buf;
1268 dma_addr_t tmp_tx_dma, tmp_rx_dma;
1269 dma_addr_t tmp_buf_dma;
1270 int i;
1271
1272 ULI526X_DBUG(0, "uli526x_descriptor_init()", 0);
1273
1274 /* tx descriptor start pointer */
1275 db->tx_insert_ptr = db->first_tx_desc;
1276 db->tx_remove_ptr = db->first_tx_desc;
1277 uw32(DCR4, db->first_tx_desc_dma); /* TX DESC address */
1278
1279 /* rx descriptor start pointer */
1280 db->first_rx_desc = (void *)db->first_tx_desc + sizeof(struct tx_desc) * TX_DESC_CNT;
1281 db->first_rx_desc_dma = db->first_tx_desc_dma + sizeof(struct tx_desc) * TX_DESC_CNT;
1282 db->rx_insert_ptr = db->first_rx_desc;
1283 db->rx_ready_ptr = db->first_rx_desc;
1284 uw32(DCR3, db->first_rx_desc_dma); /* RX DESC address */
1285
1286 /* Init Transmit chain */
1287 tmp_buf = db->buf_pool_start;
1288 tmp_buf_dma = db->buf_pool_dma_start;
1289 tmp_tx_dma = db->first_tx_desc_dma;
1290 for (tmp_tx = db->first_tx_desc, i = 0; i < TX_DESC_CNT; i++, tmp_tx++) {
1291 tmp_tx->tx_buf_ptr = tmp_buf;
1292 tmp_tx->tdes0 = cpu_to_le32(0);
1293 tmp_tx->tdes1 = cpu_to_le32(0x81000000); /* IC, chain */
1294 tmp_tx->tdes2 = cpu_to_le32(tmp_buf_dma);
1295 tmp_tx_dma += sizeof(struct tx_desc);
1296 tmp_tx->tdes3 = cpu_to_le32(tmp_tx_dma);
1297 tmp_tx->next_tx_desc = tmp_tx + 1;
1298 tmp_buf = tmp_buf + TX_BUF_ALLOC;
1299 tmp_buf_dma = tmp_buf_dma + TX_BUF_ALLOC;
1300 }
1301 (--tmp_tx)->tdes3 = cpu_to_le32(db->first_tx_desc_dma);
1302 tmp_tx->next_tx_desc = db->first_tx_desc;
1303
1304 /* Init Receive descriptor chain */
1305 tmp_rx_dma=db->first_rx_desc_dma;
1306 for (tmp_rx = db->first_rx_desc, i = 0; i < RX_DESC_CNT; i++, tmp_rx++) {
1307 tmp_rx->rdes0 = cpu_to_le32(0);
1308 tmp_rx->rdes1 = cpu_to_le32(0x01000600);
1309 tmp_rx_dma += sizeof(struct rx_desc);
1310 tmp_rx->rdes3 = cpu_to_le32(tmp_rx_dma);
1311 tmp_rx->next_rx_desc = tmp_rx + 1;
1312 }
1313 (--tmp_rx)->rdes3 = cpu_to_le32(db->first_rx_desc_dma);
1314 tmp_rx->next_rx_desc = db->first_rx_desc;
1315
1316 /* pre-allocate Rx buffer */
1317 allocate_rx_buffer(dev);
1318 }
1319
1320
1321 /*
1322 * Update CR6 value
1323 * Firstly stop ULI526X, then written value and start
1324 */
update_cr6(u32 cr6_data,void __iomem * ioaddr)1325 static void update_cr6(u32 cr6_data, void __iomem *ioaddr)
1326 {
1327 uw32(DCR6, cr6_data);
1328 udelay(5);
1329 }
1330
1331
1332 /*
1333 * Send a setup frame for M5261/M5263
1334 * This setup frame initialize ULI526X address filter mode
1335 */
1336
1337 #ifdef __BIG_ENDIAN
1338 #define FLT_SHIFT 16
1339 #else
1340 #define FLT_SHIFT 0
1341 #endif
1342
send_filter_frame(struct net_device * dev,int mc_cnt)1343 static void send_filter_frame(struct net_device *dev, int mc_cnt)
1344 {
1345 struct uli526x_board_info *db = netdev_priv(dev);
1346 void __iomem *ioaddr = db->ioaddr;
1347 struct netdev_hw_addr *ha;
1348 struct tx_desc *txptr;
1349 const u16 * addrptr;
1350 u32 * suptr;
1351 int i;
1352
1353 ULI526X_DBUG(0, "send_filter_frame()", 0);
1354
1355 txptr = db->tx_insert_ptr;
1356 suptr = (u32 *) txptr->tx_buf_ptr;
1357
1358 /* Node address */
1359 addrptr = (const u16 *) dev->dev_addr;
1360 *suptr++ = addrptr[0] << FLT_SHIFT;
1361 *suptr++ = addrptr[1] << FLT_SHIFT;
1362 *suptr++ = addrptr[2] << FLT_SHIFT;
1363
1364 /* broadcast address */
1365 *suptr++ = 0xffff << FLT_SHIFT;
1366 *suptr++ = 0xffff << FLT_SHIFT;
1367 *suptr++ = 0xffff << FLT_SHIFT;
1368
1369 /* fit the multicast address */
1370 netdev_for_each_mc_addr(ha, dev) {
1371 addrptr = (u16 *) ha->addr;
1372 *suptr++ = addrptr[0] << FLT_SHIFT;
1373 *suptr++ = addrptr[1] << FLT_SHIFT;
1374 *suptr++ = addrptr[2] << FLT_SHIFT;
1375 }
1376
1377 for (i = netdev_mc_count(dev); i < 14; i++) {
1378 *suptr++ = 0xffff << FLT_SHIFT;
1379 *suptr++ = 0xffff << FLT_SHIFT;
1380 *suptr++ = 0xffff << FLT_SHIFT;
1381 }
1382
1383 /* prepare the setup frame */
1384 db->tx_insert_ptr = txptr->next_tx_desc;
1385 txptr->tdes1 = cpu_to_le32(0x890000c0);
1386
1387 /* Resource Check and Send the setup packet */
1388 if (db->tx_packet_cnt < TX_DESC_CNT) {
1389 /* Resource Empty */
1390 db->tx_packet_cnt++;
1391 txptr->tdes0 = cpu_to_le32(0x80000000);
1392 update_cr6(db->cr6_data | 0x2000, ioaddr);
1393 uw32(DCR1, 0x1); /* Issue Tx polling */
1394 update_cr6(db->cr6_data, ioaddr);
1395 netif_trans_update(dev);
1396 } else
1397 netdev_err(dev, "No Tx resource - Send_filter_frame!\n");
1398 }
1399
1400
1401 /*
1402 * Allocate rx buffer,
1403 * As possible as allocate maxiumn Rx buffer
1404 */
1405
allocate_rx_buffer(struct net_device * dev)1406 static void allocate_rx_buffer(struct net_device *dev)
1407 {
1408 struct uli526x_board_info *db = netdev_priv(dev);
1409 struct rx_desc *rxptr;
1410 struct sk_buff *skb;
1411
1412 rxptr = db->rx_insert_ptr;
1413
1414 while(db->rx_avail_cnt < RX_DESC_CNT) {
1415 skb = netdev_alloc_skb(dev, RX_ALLOC_SIZE);
1416 if (skb == NULL)
1417 break;
1418 rxptr->rx_skb_ptr = skb; /* FIXME (?) */
1419 rxptr->rdes2 = cpu_to_le32(dma_map_single(&db->pdev->dev, skb_tail_pointer(skb),
1420 RX_ALLOC_SIZE, DMA_FROM_DEVICE));
1421 wmb();
1422 rxptr->rdes0 = cpu_to_le32(0x80000000);
1423 rxptr = rxptr->next_rx_desc;
1424 db->rx_avail_cnt++;
1425 }
1426
1427 db->rx_insert_ptr = rxptr;
1428 }
1429
1430
1431 /*
1432 * Read one word data from the serial ROM
1433 */
1434
read_srom_word(struct uli526x_board_info * db,int offset)1435 static u16 read_srom_word(struct uli526x_board_info *db, int offset)
1436 {
1437 void __iomem *ioaddr = db->ioaddr;
1438 u16 srom_data = 0;
1439 int i;
1440
1441 uw32(DCR9, CR9_SROM_READ);
1442 uw32(DCR9, CR9_SROM_READ | CR9_SRCS);
1443
1444 /* Send the Read Command 110b */
1445 srom_clk_write(db, SROM_DATA_1);
1446 srom_clk_write(db, SROM_DATA_1);
1447 srom_clk_write(db, SROM_DATA_0);
1448
1449 /* Send the offset */
1450 for (i = 5; i >= 0; i--) {
1451 srom_data = (offset & (1 << i)) ? SROM_DATA_1 : SROM_DATA_0;
1452 srom_clk_write(db, srom_data);
1453 }
1454
1455 uw32(DCR9, CR9_SROM_READ | CR9_SRCS);
1456
1457 for (i = 16; i > 0; i--) {
1458 uw32(DCR9, CR9_SROM_READ | CR9_SRCS | CR9_SRCLK);
1459 udelay(5);
1460 srom_data = (srom_data << 1) |
1461 ((ur32(DCR9) & CR9_CRDOUT) ? 1 : 0);
1462 uw32(DCR9, CR9_SROM_READ | CR9_SRCS);
1463 udelay(5);
1464 }
1465
1466 uw32(DCR9, CR9_SROM_READ);
1467 return srom_data;
1468 }
1469
1470
1471 /*
1472 * Auto sense the media mode
1473 */
1474
uli526x_sense_speed(struct uli526x_board_info * db)1475 static u8 uli526x_sense_speed(struct uli526x_board_info * db)
1476 {
1477 struct uli_phy_ops *phy = &db->phy;
1478 u8 ErrFlag = 0;
1479 u16 phy_mode;
1480
1481 phy_mode = phy->read(db, db->phy_addr, 1);
1482 phy_mode = phy->read(db, db->phy_addr, 1);
1483
1484 if ( (phy_mode & 0x24) == 0x24 ) {
1485
1486 phy_mode = ((phy->read(db, db->phy_addr, 5) & 0x01e0)<<7);
1487 if(phy_mode&0x8000)
1488 phy_mode = 0x8000;
1489 else if(phy_mode&0x4000)
1490 phy_mode = 0x4000;
1491 else if(phy_mode&0x2000)
1492 phy_mode = 0x2000;
1493 else
1494 phy_mode = 0x1000;
1495
1496 switch (phy_mode) {
1497 case 0x1000: db->op_mode = ULI526X_10MHF; break;
1498 case 0x2000: db->op_mode = ULI526X_10MFD; break;
1499 case 0x4000: db->op_mode = ULI526X_100MHF; break;
1500 case 0x8000: db->op_mode = ULI526X_100MFD; break;
1501 default: db->op_mode = ULI526X_10MHF; ErrFlag = 1; break;
1502 }
1503 } else {
1504 db->op_mode = ULI526X_10MHF;
1505 ULI526X_DBUG(0, "Link Failed :", phy_mode);
1506 ErrFlag = 1;
1507 }
1508
1509 return ErrFlag;
1510 }
1511
1512
1513 /*
1514 * Set 10/100 phyxcer capability
1515 * AUTO mode : phyxcer register4 is NIC capability
1516 * Force mode: phyxcer register4 is the force media
1517 */
1518
uli526x_set_phyxcer(struct uli526x_board_info * db)1519 static void uli526x_set_phyxcer(struct uli526x_board_info *db)
1520 {
1521 struct uli_phy_ops *phy = &db->phy;
1522 u16 phy_reg;
1523
1524 /* Phyxcer capability setting */
1525 phy_reg = phy->read(db, db->phy_addr, 4) & ~0x01e0;
1526
1527 if (db->media_mode & ULI526X_AUTO) {
1528 /* AUTO Mode */
1529 phy_reg |= db->PHY_reg4;
1530 } else {
1531 /* Force Mode */
1532 switch(db->media_mode) {
1533 case ULI526X_10MHF: phy_reg |= 0x20; break;
1534 case ULI526X_10MFD: phy_reg |= 0x40; break;
1535 case ULI526X_100MHF: phy_reg |= 0x80; break;
1536 case ULI526X_100MFD: phy_reg |= 0x100; break;
1537 }
1538
1539 }
1540
1541 /* Write new capability to Phyxcer Reg4 */
1542 if ( !(phy_reg & 0x01e0)) {
1543 phy_reg|=db->PHY_reg4;
1544 db->media_mode|=ULI526X_AUTO;
1545 }
1546 phy->write(db, db->phy_addr, 4, phy_reg);
1547
1548 /* Restart Auto-Negotiation */
1549 phy->write(db, db->phy_addr, 0, 0x1200);
1550 udelay(50);
1551 }
1552
1553
1554 /*
1555 * Process op-mode
1556 AUTO mode : PHY controller in Auto-negotiation Mode
1557 * Force mode: PHY controller in force mode with HUB
1558 * N-way force capability with SWITCH
1559 */
1560
uli526x_process_mode(struct uli526x_board_info * db)1561 static void uli526x_process_mode(struct uli526x_board_info *db)
1562 {
1563 struct uli_phy_ops *phy = &db->phy;
1564 u16 phy_reg;
1565
1566 /* Full Duplex Mode Check */
1567 if (db->op_mode & 0x4)
1568 db->cr6_data |= CR6_FDM; /* Set Full Duplex Bit */
1569 else
1570 db->cr6_data &= ~CR6_FDM; /* Clear Full Duplex Bit */
1571
1572 update_cr6(db->cr6_data, db->ioaddr);
1573
1574 /* 10/100M phyxcer force mode need */
1575 if (!(db->media_mode & 0x8)) {
1576 /* Forece Mode */
1577 phy_reg = phy->read(db, db->phy_addr, 6);
1578 if (!(phy_reg & 0x1)) {
1579 /* parter without N-Way capability */
1580 phy_reg = 0x0;
1581 switch(db->op_mode) {
1582 case ULI526X_10MHF: phy_reg = 0x0; break;
1583 case ULI526X_10MFD: phy_reg = 0x100; break;
1584 case ULI526X_100MHF: phy_reg = 0x2000; break;
1585 case ULI526X_100MFD: phy_reg = 0x2100; break;
1586 }
1587 phy->write(db, db->phy_addr, 0, phy_reg);
1588 }
1589 }
1590 }
1591
1592
1593 /* M5261/M5263 Chip */
phy_writeby_cr9(struct uli526x_board_info * db,u8 phy_addr,u8 offset,u16 phy_data)1594 static void phy_writeby_cr9(struct uli526x_board_info *db, u8 phy_addr,
1595 u8 offset, u16 phy_data)
1596 {
1597 u16 i;
1598
1599 /* Send 33 synchronization clock to Phy controller */
1600 for (i = 0; i < 35; i++)
1601 phy_write_1bit(db, PHY_DATA_1);
1602
1603 /* Send start command(01) to Phy */
1604 phy_write_1bit(db, PHY_DATA_0);
1605 phy_write_1bit(db, PHY_DATA_1);
1606
1607 /* Send write command(01) to Phy */
1608 phy_write_1bit(db, PHY_DATA_0);
1609 phy_write_1bit(db, PHY_DATA_1);
1610
1611 /* Send Phy address */
1612 for (i = 0x10; i > 0; i = i >> 1)
1613 phy_write_1bit(db, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0);
1614
1615 /* Send register address */
1616 for (i = 0x10; i > 0; i = i >> 1)
1617 phy_write_1bit(db, offset & i ? PHY_DATA_1 : PHY_DATA_0);
1618
1619 /* written trasnition */
1620 phy_write_1bit(db, PHY_DATA_1);
1621 phy_write_1bit(db, PHY_DATA_0);
1622
1623 /* Write a word data to PHY controller */
1624 for (i = 0x8000; i > 0; i >>= 1)
1625 phy_write_1bit(db, phy_data & i ? PHY_DATA_1 : PHY_DATA_0);
1626 }
1627
phy_readby_cr9(struct uli526x_board_info * db,u8 phy_addr,u8 offset)1628 static u16 phy_readby_cr9(struct uli526x_board_info *db, u8 phy_addr, u8 offset)
1629 {
1630 u16 phy_data;
1631 int i;
1632
1633 /* Send 33 synchronization clock to Phy controller */
1634 for (i = 0; i < 35; i++)
1635 phy_write_1bit(db, PHY_DATA_1);
1636
1637 /* Send start command(01) to Phy */
1638 phy_write_1bit(db, PHY_DATA_0);
1639 phy_write_1bit(db, PHY_DATA_1);
1640
1641 /* Send read command(10) to Phy */
1642 phy_write_1bit(db, PHY_DATA_1);
1643 phy_write_1bit(db, PHY_DATA_0);
1644
1645 /* Send Phy address */
1646 for (i = 0x10; i > 0; i = i >> 1)
1647 phy_write_1bit(db, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0);
1648
1649 /* Send register address */
1650 for (i = 0x10; i > 0; i = i >> 1)
1651 phy_write_1bit(db, offset & i ? PHY_DATA_1 : PHY_DATA_0);
1652
1653 /* Skip transition state */
1654 phy_read_1bit(db);
1655
1656 /* read 16bit data */
1657 for (phy_data = 0, i = 0; i < 16; i++) {
1658 phy_data <<= 1;
1659 phy_data |= phy_read_1bit(db);
1660 }
1661
1662 return phy_data;
1663 }
1664
phy_readby_cr10(struct uli526x_board_info * db,u8 phy_addr,u8 offset)1665 static u16 phy_readby_cr10(struct uli526x_board_info *db, u8 phy_addr,
1666 u8 offset)
1667 {
1668 void __iomem *ioaddr = db->ioaddr;
1669 u32 cr10_value = phy_addr;
1670
1671 cr10_value = (cr10_value << 5) + offset;
1672 cr10_value = (cr10_value << 16) + 0x08000000;
1673 uw32(DCR10, cr10_value);
1674 udelay(1);
1675 while (1) {
1676 cr10_value = ur32(DCR10);
1677 if (cr10_value & 0x10000000)
1678 break;
1679 }
1680 return cr10_value & 0x0ffff;
1681 }
1682
phy_writeby_cr10(struct uli526x_board_info * db,u8 phy_addr,u8 offset,u16 phy_data)1683 static void phy_writeby_cr10(struct uli526x_board_info *db, u8 phy_addr,
1684 u8 offset, u16 phy_data)
1685 {
1686 void __iomem *ioaddr = db->ioaddr;
1687 u32 cr10_value = phy_addr;
1688
1689 cr10_value = (cr10_value << 5) + offset;
1690 cr10_value = (cr10_value << 16) + 0x04000000 + phy_data;
1691 uw32(DCR10, cr10_value);
1692 udelay(1);
1693 }
1694 /*
1695 * Write one bit data to Phy Controller
1696 */
1697
phy_write_1bit(struct uli526x_board_info * db,u32 data)1698 static void phy_write_1bit(struct uli526x_board_info *db, u32 data)
1699 {
1700 void __iomem *ioaddr = db->ioaddr;
1701
1702 uw32(DCR9, data); /* MII Clock Low */
1703 udelay(1);
1704 uw32(DCR9, data | MDCLKH); /* MII Clock High */
1705 udelay(1);
1706 uw32(DCR9, data); /* MII Clock Low */
1707 udelay(1);
1708 }
1709
1710
1711 /*
1712 * Read one bit phy data from PHY controller
1713 */
1714
phy_read_1bit(struct uli526x_board_info * db)1715 static u16 phy_read_1bit(struct uli526x_board_info *db)
1716 {
1717 void __iomem *ioaddr = db->ioaddr;
1718 u16 phy_data;
1719
1720 uw32(DCR9, 0x50000);
1721 udelay(1);
1722 phy_data = (ur32(DCR9) >> 19) & 0x1;
1723 uw32(DCR9, 0x40000);
1724 udelay(1);
1725
1726 return phy_data;
1727 }
1728
1729
1730 static const struct pci_device_id uli526x_pci_tbl[] = {
1731 { 0x10B9, 0x5261, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ULI5261_ID },
1732 { 0x10B9, 0x5263, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ULI5263_ID },
1733 { 0, }
1734 };
1735 MODULE_DEVICE_TABLE(pci, uli526x_pci_tbl);
1736
1737 static SIMPLE_DEV_PM_OPS(uli526x_pm_ops, uli526x_suspend, uli526x_resume);
1738
1739 static struct pci_driver uli526x_driver = {
1740 .name = "uli526x",
1741 .id_table = uli526x_pci_tbl,
1742 .probe = uli526x_init_one,
1743 .remove = uli526x_remove_one,
1744 .driver.pm = &uli526x_pm_ops,
1745 };
1746
1747 MODULE_AUTHOR("Peer Chen, peer.chen@uli.com.tw");
1748 MODULE_DESCRIPTION("ULi M5261/M5263 fast ethernet driver");
1749 MODULE_LICENSE("GPL");
1750
1751 module_param(debug, int, 0644);
1752 module_param(mode, int, 0);
1753 module_param(cr6set, int, 0);
1754 MODULE_PARM_DESC(debug, "ULi M5261/M5263 enable debugging (0-1)");
1755 MODULE_PARM_DESC(mode, "ULi M5261/M5263: Bit 0: 10/100Mbps, bit 2: duplex, bit 8: HomePNA");
1756
1757 /* Description:
1758 * when user used insmod to add module, system invoked init_module()
1759 * to register the services.
1760 */
1761
uli526x_init_module(void)1762 static int __init uli526x_init_module(void)
1763 {
1764
1765 ULI526X_DBUG(0, "init_module() ", debug);
1766
1767 if (debug)
1768 uli526x_debug = debug; /* set debug flag */
1769 if (cr6set)
1770 uli526x_cr6_user_set = cr6set;
1771
1772 switch (mode) {
1773 case ULI526X_10MHF:
1774 case ULI526X_100MHF:
1775 case ULI526X_10MFD:
1776 case ULI526X_100MFD:
1777 uli526x_media_mode = mode;
1778 break;
1779 default:
1780 uli526x_media_mode = ULI526X_AUTO;
1781 break;
1782 }
1783
1784 return pci_register_driver(&uli526x_driver);
1785 }
1786
1787
1788 /*
1789 * Description:
1790 * when user used rmmod to delete module, system invoked clean_module()
1791 * to un-register all registered services.
1792 */
1793
uli526x_cleanup_module(void)1794 static void __exit uli526x_cleanup_module(void)
1795 {
1796 ULI526X_DBUG(0, "uli526x_cleanup_module() ", debug);
1797 pci_unregister_driver(&uli526x_driver);
1798 }
1799
1800 module_init(uli526x_init_module);
1801 module_exit(uli526x_cleanup_module);
1802