xref: /linux/arch/arm/mach-omap1/clock_data.c (revision 9a87ffc99ec8eb8d35eed7c4f816d75f5cc9662e)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  *  linux/arch/arm/mach-omap1/clock_data.c
4  *
5  *  Copyright (C) 2004 - 2005, 2009-2010 Nokia Corporation
6  *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
7  *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
8  *
9  * To do:
10  * - Clocks that are only available on some chips should be marked with the
11  *   chips that they are present on.
12  */
13 
14 #include <linux/kernel.h>
15 #include <linux/io.h>
16 #include <linux/clk.h>
17 #include <linux/clkdev.h>
18 #include <linux/clk-provider.h>
19 #include <linux/cpufreq.h>
20 #include <linux/delay.h>
21 #include <linux/soc/ti/omap1-io.h>
22 
23 #include <asm/mach-types.h>  /* for machine_is_* */
24 
25 #include "soc.h"
26 #include "hardware.h"
27 #include "usb.h"   /* for OTG_BASE */
28 #include "iomap.h"
29 #include "clock.h"
30 #include "sram.h"
31 
32 /* Some ARM_IDLECT1 bit shifts - used in struct arm_idlect1_clk */
33 #define IDL_CLKOUT_ARM_SHIFT			12
34 #define IDLTIM_ARM_SHIFT			9
35 #define IDLAPI_ARM_SHIFT			8
36 #define IDLIF_ARM_SHIFT				6
37 #define IDLLB_ARM_SHIFT				4	/* undocumented? */
38 #define OMAP1510_IDLLCD_ARM_SHIFT		3	/* undocumented? */
39 #define IDLPER_ARM_SHIFT			2
40 #define IDLXORP_ARM_SHIFT			1
41 #define IDLWDT_ARM_SHIFT			0
42 
43 /* Some MOD_CONF_CTRL_0 bit shifts - used in struct clk.enable_bit */
44 #define CONF_MOD_UART3_CLK_MODE_R		31
45 #define CONF_MOD_UART2_CLK_MODE_R		30
46 #define CONF_MOD_UART1_CLK_MODE_R		29
47 #define CONF_MOD_MMC_SD_CLK_REQ_R		23
48 #define CONF_MOD_MCBSP3_AUXON			20
49 
50 /* Some MOD_CONF_CTRL_1 bit shifts - used in struct clk.enable_bit */
51 #define CONF_MOD_SOSSI_CLK_EN_R			16
52 
53 /* Some OTG_SYSCON_2-specific bit fields */
54 #define OTG_SYSCON_2_UHOST_EN_SHIFT		8
55 
56 /* Some SOFT_REQ_REG bit fields - used in struct clk.enable_bit */
57 #define SOFT_MMC2_DPLL_REQ_SHIFT	13
58 #define SOFT_MMC_DPLL_REQ_SHIFT		12
59 #define SOFT_UART3_DPLL_REQ_SHIFT	11
60 #define SOFT_UART2_DPLL_REQ_SHIFT	10
61 #define SOFT_UART1_DPLL_REQ_SHIFT	9
62 #define SOFT_USB_OTG_DPLL_REQ_SHIFT	8
63 #define SOFT_CAM_DPLL_REQ_SHIFT		7
64 #define SOFT_COM_MCKO_REQ_SHIFT		6
65 #define SOFT_PERIPH_REQ_SHIFT		5	/* sys_ck gate for UART2 ? */
66 #define USB_REQ_EN_SHIFT		4
67 #define SOFT_USB_REQ_SHIFT		3	/* sys_ck gate for USB host? */
68 #define SOFT_SDW_REQ_SHIFT		2	/* sys_ck gate for Bluetooth? */
69 #define SOFT_COM_REQ_SHIFT		1	/* sys_ck gate for com proc? */
70 #define SOFT_DPLL_REQ_SHIFT		0
71 
72 /*
73  * Omap1 clocks
74  */
75 
76 static struct omap1_clk ck_ref = {
77 	.hw.init	= CLK_HW_INIT_NO_PARENT("ck_ref", &omap1_clk_rate_ops, 0),
78 	.rate		= 12000000,
79 };
80 
81 static struct omap1_clk ck_dpll1 = {
82 	.hw.init	= CLK_HW_INIT("ck_dpll1", "ck_ref", &omap1_clk_rate_ops,
83 				      /*
84 				       * force recursive refresh of rates of the clock
85 				       * and its children when clk_get_rate() is called
86 				       */
87 				      CLK_GET_RATE_NOCACHE),
88 };
89 
90 /*
91  * FIXME: This clock seems to be necessary but no-one has asked for its
92  * activation.  [ FIX: SoSSI, SSR ]
93  */
94 static struct arm_idlect1_clk ck_dpll1out = {
95 	.clk = {
96 		.hw.init	= CLK_HW_INIT("ck_dpll1out", "ck_dpll1", &omap1_clk_gate_ops, 0),
97 		.ops		= &clkops_generic,
98 		.flags		= CLOCK_IDLE_CONTROL | ENABLE_REG_32BIT,
99 		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
100 		.enable_bit	= EN_CKOUT_ARM,
101 	},
102 	.idlect_shift	= IDL_CLKOUT_ARM_SHIFT,
103 };
104 
105 static struct omap1_clk sossi_ck = {
106 	.hw.init	= CLK_HW_INIT("ck_sossi", "ck_dpll1out", &omap1_clk_full_ops, 0),
107 	.ops		= &clkops_generic,
108 	.flags		= CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT,
109 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1),
110 	.enable_bit	= CONF_MOD_SOSSI_CLK_EN_R,
111 	.recalc		= &omap1_sossi_recalc,
112 	.round_rate	= &omap1_round_sossi_rate,
113 	.set_rate	= &omap1_set_sossi_rate,
114 };
115 
116 static struct omap1_clk arm_ck = {
117 	.hw.init	= CLK_HW_INIT("arm_ck", "ck_dpll1", &omap1_clk_rate_ops, 0),
118 	.rate_offset	= CKCTL_ARMDIV_OFFSET,
119 	.recalc		= &omap1_ckctl_recalc,
120 	.round_rate	= omap1_clk_round_rate_ckctl_arm,
121 	.set_rate	= omap1_clk_set_rate_ckctl_arm,
122 };
123 
124 static struct arm_idlect1_clk armper_ck = {
125 	.clk = {
126 		.hw.init	= CLK_HW_INIT("armper_ck", "ck_dpll1", &omap1_clk_full_ops,
127 					      CLK_IS_CRITICAL),
128 		.ops		= &clkops_generic,
129 		.flags		= CLOCK_IDLE_CONTROL,
130 		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
131 		.enable_bit	= EN_PERCK,
132 		.rate_offset	= CKCTL_PERDIV_OFFSET,
133 		.recalc		= &omap1_ckctl_recalc,
134 		.round_rate	= omap1_clk_round_rate_ckctl_arm,
135 		.set_rate	= omap1_clk_set_rate_ckctl_arm,
136 	},
137 	.idlect_shift	= IDLPER_ARM_SHIFT,
138 };
139 
140 /*
141  * FIXME: This clock seems to be necessary but no-one has asked for its
142  * activation.  [ GPIO code for 1510 ]
143  */
144 static struct omap1_clk arm_gpio_ck = {
145 	.hw.init	= CLK_HW_INIT("ick", "ck_dpll1", &omap1_clk_gate_ops, CLK_IS_CRITICAL),
146 	.ops		= &clkops_generic,
147 	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
148 	.enable_bit	= EN_GPIOCK,
149 };
150 
151 static struct arm_idlect1_clk armxor_ck = {
152 	.clk = {
153 		.hw.init	= CLK_HW_INIT("armxor_ck", "ck_ref", &omap1_clk_gate_ops,
154 					      CLK_IS_CRITICAL),
155 		.ops		= &clkops_generic,
156 		.flags		= CLOCK_IDLE_CONTROL,
157 		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
158 		.enable_bit	= EN_XORPCK,
159 	},
160 	.idlect_shift	= IDLXORP_ARM_SHIFT,
161 };
162 
163 static struct arm_idlect1_clk armtim_ck = {
164 	.clk = {
165 		.hw.init	= CLK_HW_INIT("armtim_ck", "ck_ref", &omap1_clk_gate_ops,
166 					      CLK_IS_CRITICAL),
167 		.ops		= &clkops_generic,
168 		.flags		= CLOCK_IDLE_CONTROL,
169 		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
170 		.enable_bit	= EN_TIMCK,
171 	},
172 	.idlect_shift	= IDLTIM_ARM_SHIFT,
173 };
174 
175 static struct arm_idlect1_clk armwdt_ck = {
176 	.clk = {
177 		.hw.init	= CLK_HW_INIT("armwdt_ck", "ck_ref", &omap1_clk_full_ops, 0),
178 		.ops		= &clkops_generic,
179 		.flags		= CLOCK_IDLE_CONTROL,
180 		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
181 		.enable_bit	= EN_WDTCK,
182 		.fixed_div	= 14,
183 		.recalc		= &omap_fixed_divisor_recalc,
184 	},
185 	.idlect_shift	= IDLWDT_ARM_SHIFT,
186 };
187 
188 static struct omap1_clk arminth_ck16xx = {
189 	.hw.init	= CLK_HW_INIT("arminth_ck", "arm_ck", &omap1_clk_null_ops, 0),
190 	/* Note: On 16xx the frequency can be divided by 2 by programming
191 	 * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1
192 	 *
193 	 * 1510 version is in TC clocks.
194 	 */
195 };
196 
197 static struct omap1_clk dsp_ck = {
198 	.hw.init	= CLK_HW_INIT("dsp_ck", "ck_dpll1", &omap1_clk_full_ops, 0),
199 	.ops		= &clkops_generic,
200 	.enable_reg	= OMAP1_IO_ADDRESS(ARM_CKCTL),
201 	.enable_bit	= EN_DSPCK,
202 	.rate_offset	= CKCTL_DSPDIV_OFFSET,
203 	.recalc		= &omap1_ckctl_recalc,
204 	.round_rate	= omap1_clk_round_rate_ckctl_arm,
205 	.set_rate	= omap1_clk_set_rate_ckctl_arm,
206 };
207 
208 static struct omap1_clk dspmmu_ck = {
209 	.hw.init	= CLK_HW_INIT("dspmmu_ck", "ck_dpll1", &omap1_clk_rate_ops, 0),
210 	.rate_offset	= CKCTL_DSPMMUDIV_OFFSET,
211 	.recalc		= &omap1_ckctl_recalc,
212 	.round_rate	= omap1_clk_round_rate_ckctl_arm,
213 	.set_rate	= omap1_clk_set_rate_ckctl_arm,
214 };
215 
216 static struct omap1_clk dspper_ck = {
217 	.hw.init	= CLK_HW_INIT("dspper_ck", "ck_dpll1", &omap1_clk_full_ops, 0),
218 	.ops		= &clkops_dspck,
219 	.enable_reg	= DSP_IDLECT2,
220 	.enable_bit	= EN_PERCK,
221 	.rate_offset	= CKCTL_PERDIV_OFFSET,
222 	.recalc		= &omap1_ckctl_recalc_dsp_domain,
223 	.round_rate	= omap1_clk_round_rate_ckctl_arm,
224 	.set_rate	= &omap1_clk_set_rate_dsp_domain,
225 };
226 
227 static struct omap1_clk dspxor_ck = {
228 	.hw.init	= CLK_HW_INIT("dspxor_ck", "ck_ref", &omap1_clk_gate_ops, 0),
229 	.ops		= &clkops_dspck,
230 	.enable_reg	= DSP_IDLECT2,
231 	.enable_bit	= EN_XORPCK,
232 };
233 
234 static struct omap1_clk dsptim_ck = {
235 	.hw.init	= CLK_HW_INIT("dsptim_ck", "ck_ref", &omap1_clk_gate_ops, 0),
236 	.ops		= &clkops_dspck,
237 	.enable_reg	= DSP_IDLECT2,
238 	.enable_bit	= EN_DSPTIMCK,
239 };
240 
241 static struct arm_idlect1_clk tc_ck = {
242 	.clk = {
243 		.hw.init	= CLK_HW_INIT("tc_ck", "ck_dpll1", &omap1_clk_rate_ops, 0),
244 		.flags		= CLOCK_IDLE_CONTROL,
245 		.rate_offset	= CKCTL_TCDIV_OFFSET,
246 		.recalc		= &omap1_ckctl_recalc,
247 		.round_rate	= omap1_clk_round_rate_ckctl_arm,
248 		.set_rate	= omap1_clk_set_rate_ckctl_arm,
249 	},
250 	.idlect_shift	= IDLIF_ARM_SHIFT,
251 };
252 
253 static struct omap1_clk arminth_ck1510 = {
254 	.hw.init	= CLK_HW_INIT("arminth_ck", "tc_ck", &omap1_clk_null_ops, 0),
255 	/* Note: On 1510 the frequency follows TC_CK
256 	 *
257 	 * 16xx version is in MPU clocks.
258 	 */
259 };
260 
261 static struct omap1_clk tipb_ck = {
262 	/* No-idle controlled by "tc_ck" */
263 	.hw.init	= CLK_HW_INIT("tipb_ck", "tc_ck", &omap1_clk_null_ops, 0),
264 };
265 
266 static struct omap1_clk l3_ocpi_ck = {
267 	/* No-idle controlled by "tc_ck" */
268 	.hw.init	= CLK_HW_INIT("l3_ocpi_ck", "tc_ck", &omap1_clk_gate_ops, 0),
269 	.ops		= &clkops_generic,
270 	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT3),
271 	.enable_bit	= EN_OCPI_CK,
272 };
273 
274 static struct omap1_clk tc1_ck = {
275 	.hw.init	= CLK_HW_INIT("tc1_ck", "tc_ck", &omap1_clk_gate_ops, 0),
276 	.ops		= &clkops_generic,
277 	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT3),
278 	.enable_bit	= EN_TC1_CK,
279 };
280 
281 /*
282  * FIXME: This clock seems to be necessary but no-one has asked for its
283  * activation.  [ pm.c (SRAM), CCP, Camera ]
284  */
285 
286 static struct omap1_clk tc2_ck = {
287 	.hw.init	= CLK_HW_INIT("tc2_ck", "tc_ck", &omap1_clk_gate_ops, CLK_IS_CRITICAL),
288 	.ops		= &clkops_generic,
289 	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT3),
290 	.enable_bit	= EN_TC2_CK,
291 };
292 
293 static struct omap1_clk dma_ck = {
294 	/* No-idle controlled by "tc_ck" */
295 	.hw.init	= CLK_HW_INIT("dma_ck", "tc_ck", &omap1_clk_null_ops, 0),
296 };
297 
298 static struct omap1_clk dma_lcdfree_ck = {
299 	.hw.init	= CLK_HW_INIT("dma_lcdfree_ck", "tc_ck", &omap1_clk_null_ops, 0),
300 };
301 
302 static struct arm_idlect1_clk api_ck = {
303 	.clk = {
304 		.hw.init	= CLK_HW_INIT("api_ck", "tc_ck", &omap1_clk_gate_ops, 0),
305 		.ops		= &clkops_generic,
306 		.flags		= CLOCK_IDLE_CONTROL,
307 		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
308 		.enable_bit	= EN_APICK,
309 	},
310 	.idlect_shift	= IDLAPI_ARM_SHIFT,
311 };
312 
313 static struct arm_idlect1_clk lb_ck = {
314 	.clk = {
315 		.hw.init	= CLK_HW_INIT("lb_ck", "tc_ck", &omap1_clk_gate_ops, 0),
316 		.ops		= &clkops_generic,
317 		.flags		= CLOCK_IDLE_CONTROL,
318 		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
319 		.enable_bit	= EN_LBCK,
320 	},
321 	.idlect_shift	= IDLLB_ARM_SHIFT,
322 };
323 
324 static struct omap1_clk rhea1_ck = {
325 	.hw.init	= CLK_HW_INIT("rhea1_ck", "tc_ck", &omap1_clk_null_ops, 0),
326 };
327 
328 static struct omap1_clk rhea2_ck = {
329 	.hw.init	= CLK_HW_INIT("rhea2_ck", "tc_ck", &omap1_clk_null_ops, 0),
330 };
331 
332 static struct omap1_clk lcd_ck_16xx = {
333 	.hw.init	= CLK_HW_INIT("lcd_ck", "ck_dpll1", &omap1_clk_full_ops, 0),
334 	.ops		= &clkops_generic,
335 	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
336 	.enable_bit	= EN_LCDCK,
337 	.rate_offset	= CKCTL_LCDDIV_OFFSET,
338 	.recalc		= &omap1_ckctl_recalc,
339 	.round_rate	= omap1_clk_round_rate_ckctl_arm,
340 	.set_rate	= omap1_clk_set_rate_ckctl_arm,
341 };
342 
343 static struct arm_idlect1_clk lcd_ck_1510 = {
344 	.clk = {
345 		.hw.init	= CLK_HW_INIT("lcd_ck", "ck_dpll1", &omap1_clk_full_ops, 0),
346 		.ops		= &clkops_generic,
347 		.flags		= CLOCK_IDLE_CONTROL,
348 		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
349 		.enable_bit	= EN_LCDCK,
350 		.rate_offset	= CKCTL_LCDDIV_OFFSET,
351 		.recalc		= &omap1_ckctl_recalc,
352 		.round_rate	= omap1_clk_round_rate_ckctl_arm,
353 		.set_rate	= omap1_clk_set_rate_ckctl_arm,
354 	},
355 	.idlect_shift	= OMAP1510_IDLLCD_ARM_SHIFT,
356 };
357 
358 
359 /*
360  * XXX The enable_bit here is misused - it simply switches between 12MHz
361  * and 48MHz.  Reimplement with clk_mux.
362  *
363  * XXX does this need SYSC register handling?
364  */
365 static struct omap1_clk uart1_1510 = {
366 	/* Direct from ULPD, no real parent */
367 	.hw.init	= CLK_HW_INIT("uart1_ck", "armper_ck", &omap1_clk_full_ops, 0),
368 	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
369 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
370 	.enable_bit	= CONF_MOD_UART1_CLK_MODE_R,
371 	.round_rate	= &omap1_round_uart_rate,
372 	.set_rate	= &omap1_set_uart_rate,
373 	.recalc		= &omap1_uart_recalc,
374 };
375 
376 /*
377  * XXX The enable_bit here is misused - it simply switches between 12MHz
378  * and 48MHz.  Reimplement with clk_mux.
379  *
380  * XXX SYSC register handling does not belong in the clock framework
381  */
382 static struct uart_clk uart1_16xx = {
383 	.clk	= {
384 		.ops		= &clkops_uart_16xx,
385 		/* Direct from ULPD, no real parent */
386 		.hw.init	= CLK_HW_INIT("uart1_ck", "armper_ck", &omap1_clk_full_ops, 0),
387 		.rate		= 48000000,
388 		.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
389 		.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
390 		.enable_bit	= CONF_MOD_UART1_CLK_MODE_R,
391 	},
392 	.sysc_addr	= 0xfffb0054,
393 };
394 
395 /*
396  * XXX The enable_bit here is misused - it simply switches between 12MHz
397  * and 48MHz.  Reimplement with clk_mux.
398  *
399  * XXX does this need SYSC register handling?
400  */
401 static struct omap1_clk uart2_ck = {
402 	/* Direct from ULPD, no real parent */
403 	.hw.init	= CLK_HW_INIT("uart2_ck", "armper_ck", &omap1_clk_full_ops, 0),
404 	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
405 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
406 	.enable_bit	= CONF_MOD_UART2_CLK_MODE_R,
407 	.round_rate	= &omap1_round_uart_rate,
408 	.set_rate	= &omap1_set_uart_rate,
409 	.recalc		= &omap1_uart_recalc,
410 };
411 
412 /*
413  * XXX The enable_bit here is misused - it simply switches between 12MHz
414  * and 48MHz.  Reimplement with clk_mux.
415  *
416  * XXX does this need SYSC register handling?
417  */
418 static struct omap1_clk uart3_1510 = {
419 	/* Direct from ULPD, no real parent */
420 	.hw.init	= CLK_HW_INIT("uart3_ck", "armper_ck", &omap1_clk_full_ops, 0),
421 	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
422 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
423 	.enable_bit	= CONF_MOD_UART3_CLK_MODE_R,
424 	.round_rate	= &omap1_round_uart_rate,
425 	.set_rate	= &omap1_set_uart_rate,
426 	.recalc		= &omap1_uart_recalc,
427 };
428 
429 /*
430  * XXX The enable_bit here is misused - it simply switches between 12MHz
431  * and 48MHz.  Reimplement with clk_mux.
432  *
433  * XXX SYSC register handling does not belong in the clock framework
434  */
435 static struct uart_clk uart3_16xx = {
436 	.clk	= {
437 		.ops		= &clkops_uart_16xx,
438 		/* Direct from ULPD, no real parent */
439 		.hw.init	= CLK_HW_INIT("uart3_ck", "armper_ck", &omap1_clk_full_ops, 0),
440 		.rate		= 48000000,
441 		.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
442 		.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
443 		.enable_bit	= CONF_MOD_UART3_CLK_MODE_R,
444 	},
445 	.sysc_addr	= 0xfffb9854,
446 };
447 
448 static struct omap1_clk usb_clko = {	/* 6 MHz output on W4_USB_CLKO */
449 	.ops		= &clkops_generic,
450 	/* Direct from ULPD, no parent */
451 	.hw.init	= CLK_HW_INIT_NO_PARENT("usb_clko", &omap1_clk_full_ops, 0),
452 	.rate		= 6000000,
453 	.flags		= ENABLE_REG_32BIT,
454 	.enable_reg	= OMAP1_IO_ADDRESS(ULPD_CLOCK_CTRL),
455 	.enable_bit	= USB_MCLK_EN_BIT,
456 };
457 
458 static struct omap1_clk usb_hhc_ck1510 = {
459 	.ops		= &clkops_generic,
460 	/* Direct from ULPD, no parent */
461 	.hw.init	= CLK_HW_INIT_NO_PARENT("usb_hhc_ck", &omap1_clk_full_ops, 0),
462 	.rate		= 48000000, /* Actually 2 clocks, 12MHz and 48MHz */
463 	.flags		= ENABLE_REG_32BIT,
464 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
465 	.enable_bit	= USB_HOST_HHC_UHOST_EN,
466 };
467 
468 static struct omap1_clk usb_hhc_ck16xx = {
469 	.ops		= &clkops_generic,
470 	/* Direct from ULPD, no parent */
471 	.hw.init	= CLK_HW_INIT_NO_PARENT("usb_hhc_ck", &omap1_clk_full_ops, 0),
472 	.rate		= 48000000,
473 	/* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */
474 	.flags		= ENABLE_REG_32BIT,
475 	.enable_reg	= OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */
476 	.enable_bit	= OTG_SYSCON_2_UHOST_EN_SHIFT
477 };
478 
479 static struct omap1_clk usb_dc_ck = {
480 	.ops		= &clkops_generic,
481 	/* Direct from ULPD, no parent */
482 	.hw.init	= CLK_HW_INIT_NO_PARENT("usb_dc_ck", &omap1_clk_full_ops, 0),
483 	.rate		= 48000000,
484 	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
485 	.enable_bit	= SOFT_USB_OTG_DPLL_REQ_SHIFT,
486 };
487 
488 static struct omap1_clk uart1_7xx = {
489 	.ops		= &clkops_generic,
490 	/* Direct from ULPD, no parent */
491 	.hw.init	= CLK_HW_INIT_NO_PARENT("uart1_ck", &omap1_clk_full_ops, 0),
492 	.rate		= 12000000,
493 	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
494 	.enable_bit	= 9,
495 };
496 
497 static struct omap1_clk uart2_7xx = {
498 	.ops		= &clkops_generic,
499 	/* Direct from ULPD, no parent */
500 	.hw.init	= CLK_HW_INIT_NO_PARENT("uart2_ck", &omap1_clk_full_ops, 0),
501 	.rate		= 12000000,
502 	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
503 	.enable_bit	= 11,
504 };
505 
506 static struct omap1_clk mclk_1510 = {
507 	.ops		= &clkops_generic,
508 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
509 	.hw.init	= CLK_HW_INIT_NO_PARENT("mclk", &omap1_clk_full_ops, 0),
510 	.rate		= 12000000,
511 	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
512 	.enable_bit	= SOFT_COM_MCKO_REQ_SHIFT,
513 };
514 
515 static struct omap1_clk mclk_16xx = {
516 	.ops		= &clkops_generic,
517 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
518 	.hw.init	= CLK_HW_INIT_NO_PARENT("mclk", &omap1_clk_full_ops, 0),
519 	.enable_reg	= OMAP1_IO_ADDRESS(COM_CLK_DIV_CTRL_SEL),
520 	.enable_bit	= COM_ULPD_PLL_CLK_REQ,
521 	.set_rate	= &omap1_set_ext_clk_rate,
522 	.round_rate	= &omap1_round_ext_clk_rate,
523 	.init		= &omap1_init_ext_clk,
524 };
525 
526 static struct omap1_clk bclk_1510 = {
527 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
528 	.hw.init	= CLK_HW_INIT_NO_PARENT("bclk", &omap1_clk_rate_ops, 0),
529 	.rate		= 12000000,
530 };
531 
532 static struct omap1_clk bclk_16xx = {
533 	.ops		= &clkops_generic,
534 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
535 	.hw.init	= CLK_HW_INIT_NO_PARENT("bclk", &omap1_clk_full_ops, 0),
536 	.enable_reg	= OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL),
537 	.enable_bit	= SWD_ULPD_PLL_CLK_REQ,
538 	.set_rate	= &omap1_set_ext_clk_rate,
539 	.round_rate	= &omap1_round_ext_clk_rate,
540 	.init		= &omap1_init_ext_clk,
541 };
542 
543 static struct omap1_clk mmc1_ck = {
544 	.ops		= &clkops_generic,
545 	/* Functional clock is direct from ULPD, interface clock is ARMPER */
546 	.hw.init	= CLK_HW_INIT("mmc1_ck", "armper_ck", &omap1_clk_full_ops, 0),
547 	.rate		= 48000000,
548 	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
549 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
550 	.enable_bit	= CONF_MOD_MMC_SD_CLK_REQ_R,
551 };
552 
553 /*
554  * XXX MOD_CONF_CTRL_0 bit 20 is defined in the 1510 TRM as
555  * CONF_MOD_MCBSP3_AUXON ??
556  */
557 static struct omap1_clk mmc2_ck = {
558 	.ops		= &clkops_generic,
559 	/* Functional clock is direct from ULPD, interface clock is ARMPER */
560 	.hw.init	= CLK_HW_INIT("mmc2_ck", "armper_ck", &omap1_clk_full_ops, 0),
561 	.rate		= 48000000,
562 	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
563 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
564 	.enable_bit	= 20,
565 };
566 
567 static struct omap1_clk mmc3_ck = {
568 	.ops		= &clkops_generic,
569 	/* Functional clock is direct from ULPD, interface clock is ARMPER */
570 	.hw.init	= CLK_HW_INIT("mmc3_ck", "armper_ck", &omap1_clk_full_ops, 0),
571 	.rate		= 48000000,
572 	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
573 	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
574 	.enable_bit	= SOFT_MMC_DPLL_REQ_SHIFT,
575 };
576 
577 static struct omap1_clk virtual_ck_mpu = {
578 	/* Is smarter alias for arm_ck */
579 	.hw.init	= CLK_HW_INIT("mpu", "arm_ck", &omap1_clk_rate_ops, 0),
580 	.recalc		= &followparent_recalc,
581 	.set_rate	= &omap1_select_table_rate,
582 	.round_rate	= &omap1_round_to_table_rate,
583 };
584 
585 /* virtual functional clock domain for I2C. Just for making sure that ARMXOR_CK
586 remains active during MPU idle whenever this is enabled */
587 static struct omap1_clk i2c_fck = {
588 	.hw.init	= CLK_HW_INIT("i2c_fck", "armxor_ck", &omap1_clk_gate_ops, 0),
589 	.flags		= CLOCK_NO_IDLE_PARENT,
590 };
591 
592 static struct omap1_clk i2c_ick = {
593 	.hw.init	= CLK_HW_INIT("i2c_ick", "armper_ck", &omap1_clk_gate_ops, 0),
594 	.flags		= CLOCK_NO_IDLE_PARENT,
595 };
596 
597 /*
598  * clkdev integration
599  */
600 
601 static struct omap_clk omap_clks[] = {
602 	/* non-ULPD clocks */
603 	CLK(NULL,	"ck_ref",	&ck_ref.hw,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
604 	CLK(NULL,	"ck_dpll1",	&ck_dpll1.hw,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
605 	/* CK_GEN1 clocks */
606 	CLK(NULL,	"ck_dpll1out",	&ck_dpll1out.clk.hw, CK_16XX),
607 	CLK(NULL,	"ck_sossi",	&sossi_ck.hw,	CK_16XX),
608 	CLK(NULL,	"arm_ck",	&arm_ck.hw,	CK_16XX | CK_1510 | CK_310),
609 	CLK(NULL,	"armper_ck",	&armper_ck.clk.hw, CK_16XX | CK_1510 | CK_310),
610 	CLK("omap_gpio.0", "ick",	&arm_gpio_ck.hw, CK_1510 | CK_310),
611 	CLK(NULL,	"armxor_ck",	&armxor_ck.clk.hw, CK_16XX | CK_1510 | CK_310 | CK_7XX),
612 	CLK(NULL,	"armtim_ck",	&armtim_ck.clk.hw, CK_16XX | CK_1510 | CK_310),
613 	CLK("omap_wdt",	"fck",		&armwdt_ck.clk.hw, CK_16XX | CK_1510 | CK_310),
614 	CLK("omap_wdt",	"ick",		&armper_ck.clk.hw, CK_16XX),
615 	CLK("omap_wdt", "ick",		&dummy_ck.hw,	CK_1510 | CK_310),
616 	CLK(NULL,	"arminth_ck",	&arminth_ck1510.hw, CK_1510 | CK_310),
617 	CLK(NULL,	"arminth_ck",	&arminth_ck16xx.hw, CK_16XX),
618 	/* CK_GEN2 clocks */
619 	CLK(NULL,	"dsp_ck",	&dsp_ck.hw,	CK_16XX | CK_1510 | CK_310),
620 	CLK(NULL,	"dspmmu_ck",	&dspmmu_ck.hw,	CK_16XX | CK_1510 | CK_310),
621 	CLK(NULL,	"dspper_ck",	&dspper_ck.hw,	CK_16XX | CK_1510 | CK_310),
622 	CLK(NULL,	"dspxor_ck",	&dspxor_ck.hw,	CK_16XX | CK_1510 | CK_310),
623 	CLK(NULL,	"dsptim_ck",	&dsptim_ck.hw,	CK_16XX | CK_1510 | CK_310),
624 	/* CK_GEN3 clocks */
625 	CLK(NULL,	"tc_ck",	&tc_ck.clk.hw,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
626 	CLK(NULL,	"tipb_ck",	&tipb_ck.hw,	CK_1510 | CK_310),
627 	CLK(NULL,	"l3_ocpi_ck",	&l3_ocpi_ck.hw,	CK_16XX | CK_7XX),
628 	CLK(NULL,	"tc1_ck",	&tc1_ck.hw,	CK_16XX),
629 	CLK(NULL,	"tc2_ck",	&tc2_ck.hw,	CK_16XX),
630 	CLK(NULL,	"dma_ck",	&dma_ck.hw,	CK_16XX | CK_1510 | CK_310),
631 	CLK(NULL,	"dma_lcdfree_ck", &dma_lcdfree_ck.hw, CK_16XX),
632 	CLK(NULL,	"api_ck",	&api_ck.clk.hw,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
633 	CLK(NULL,	"lb_ck",	&lb_ck.clk.hw,	CK_1510 | CK_310),
634 	CLK(NULL,	"rhea1_ck",	&rhea1_ck.hw,	CK_16XX),
635 	CLK(NULL,	"rhea2_ck",	&rhea2_ck.hw,	CK_16XX),
636 	CLK(NULL,	"lcd_ck",	&lcd_ck_16xx.hw, CK_16XX | CK_7XX),
637 	CLK(NULL,	"lcd_ck",	&lcd_ck_1510.clk.hw, CK_1510 | CK_310),
638 	/* ULPD clocks */
639 	CLK(NULL,	"uart1_ck",	&uart1_1510.hw,	CK_1510 | CK_310),
640 	CLK(NULL,	"uart1_ck",	&uart1_16xx.clk.hw, CK_16XX),
641 	CLK(NULL,	"uart1_ck",	&uart1_7xx.hw,	CK_7XX),
642 	CLK(NULL,	"uart2_ck",	&uart2_ck.hw,	CK_16XX | CK_1510 | CK_310),
643 	CLK(NULL,	"uart2_ck",	&uart2_7xx.hw,	CK_7XX),
644 	CLK(NULL,	"uart3_ck",	&uart3_1510.hw,	CK_1510 | CK_310),
645 	CLK(NULL,	"uart3_ck",	&uart3_16xx.clk.hw, CK_16XX),
646 	CLK(NULL,	"usb_clko",	&usb_clko.hw,	CK_16XX | CK_1510 | CK_310),
647 	CLK(NULL,	"usb_hhc_ck",	&usb_hhc_ck1510.hw, CK_1510 | CK_310),
648 	CLK(NULL,	"usb_hhc_ck",	&usb_hhc_ck16xx.hw, CK_16XX),
649 	CLK(NULL,	"usb_dc_ck",	&usb_dc_ck.hw,	CK_16XX | CK_7XX),
650 	CLK(NULL,	"mclk",		&mclk_1510.hw,	CK_1510 | CK_310),
651 	CLK(NULL,	"mclk",		&mclk_16xx.hw,	CK_16XX),
652 	CLK(NULL,	"bclk",		&bclk_1510.hw,	CK_1510 | CK_310),
653 	CLK(NULL,	"bclk",		&bclk_16xx.hw,	CK_16XX),
654 	CLK("mmci-omap.0", "fck",	&mmc1_ck.hw,	CK_16XX | CK_1510 | CK_310),
655 	CLK("mmci-omap.0", "fck",	&mmc3_ck.hw,	CK_7XX),
656 	CLK("mmci-omap.0", "ick",	&armper_ck.clk.hw, CK_16XX | CK_1510 | CK_310 | CK_7XX),
657 	CLK("mmci-omap.1", "fck",	&mmc2_ck.hw,	CK_16XX),
658 	CLK("mmci-omap.1", "ick",	&armper_ck.clk.hw, CK_16XX),
659 	/* Virtual clocks */
660 	CLK(NULL,	"mpu",		&virtual_ck_mpu.hw, CK_16XX | CK_1510 | CK_310),
661 	CLK("omap_i2c.1", "fck",	&i2c_fck.hw,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
662 	CLK("omap_i2c.1", "ick",	&i2c_ick.hw,	CK_16XX),
663 	CLK("omap_i2c.1", "ick",	&dummy_ck.hw,	CK_1510 | CK_310 | CK_7XX),
664 	CLK("omap1_spi100k.1", "fck",	&dummy_ck.hw,	CK_7XX),
665 	CLK("omap1_spi100k.1", "ick",	&dummy_ck.hw,	CK_7XX),
666 	CLK("omap1_spi100k.2", "fck",	&dummy_ck.hw,	CK_7XX),
667 	CLK("omap1_spi100k.2", "ick",	&dummy_ck.hw,	CK_7XX),
668 	CLK("omap_uwire", "fck",	&armxor_ck.clk.hw, CK_16XX | CK_1510 | CK_310),
669 	CLK("omap-mcbsp.1", "ick",	&dspper_ck.hw,	CK_16XX),
670 	CLK("omap-mcbsp.1", "ick",	&dummy_ck.hw,	CK_1510 | CK_310),
671 	CLK("omap-mcbsp.2", "ick",	&armper_ck.clk.hw, CK_16XX),
672 	CLK("omap-mcbsp.2", "ick",	&dummy_ck.hw,	CK_1510 | CK_310),
673 	CLK("omap-mcbsp.3", "ick",	&dspper_ck.hw,	CK_16XX),
674 	CLK("omap-mcbsp.3", "ick",	&dummy_ck.hw,	CK_1510 | CK_310),
675 	CLK("omap-mcbsp.1", "fck",	&dspxor_ck.hw,	CK_16XX | CK_1510 | CK_310),
676 	CLK("omap-mcbsp.2", "fck",	&armper_ck.clk.hw, CK_16XX | CK_1510 | CK_310),
677 	CLK("omap-mcbsp.3", "fck",	&dspxor_ck.hw,	CK_16XX | CK_1510 | CK_310),
678 };
679 
680 /*
681  * init
682  */
683 
omap1_show_rates(void)684 static void __init omap1_show_rates(void)
685 {
686 	pr_notice("Clocking rate (xtal/DPLL1/MPU): %ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
687 		  ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
688 		  ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
689 		  arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
690 }
691 
692 u32 cpu_mask;
693 
omap1_clk_init(void)694 int __init omap1_clk_init(void)
695 {
696 	struct omap_clk *c;
697 	u32 reg;
698 
699 #ifdef CONFIG_DEBUG_LL
700 	/* Make sure UART clocks are enabled early */
701 	if (cpu_is_omap16xx())
702 		omap_writel(omap_readl(MOD_CONF_CTRL_0) |
703 			    CONF_MOD_UART1_CLK_MODE_R |
704 			    CONF_MOD_UART3_CLK_MODE_R, MOD_CONF_CTRL_0);
705 #endif
706 
707 	/* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */
708 	reg = omap_readw(SOFT_REQ_REG) & (1 << 4);
709 	omap_writew(reg, SOFT_REQ_REG);
710 	if (!cpu_is_omap15xx())
711 		omap_writew(0, SOFT_REQ_REG2);
712 
713 	/* By default all idlect1 clocks are allowed to idle */
714 	arm_idlect1_mask = ~0;
715 
716 	cpu_mask = 0;
717 	if (cpu_is_omap1710())
718 		cpu_mask |= CK_1710;
719 	if (cpu_is_omap16xx())
720 		cpu_mask |= CK_16XX;
721 	if (cpu_is_omap1510())
722 		cpu_mask |= CK_1510;
723 	if (cpu_is_omap310())
724 		cpu_mask |= CK_310;
725 
726 	/* Pointers to these clocks are needed by code in clock.c */
727 	api_ck_p = &api_ck.clk;
728 	ck_dpll1_p = &ck_dpll1;
729 	ck_ref_p = &ck_ref;
730 
731 	pr_info("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n",
732 		omap_readw(ARM_SYSST), omap_readw(DPLL_CTL),
733 		omap_readw(ARM_CKCTL));
734 
735 	/* We want to be in synchronous scalable mode */
736 	omap_writew(0x1000, ARM_SYSST);
737 
738 
739 	/*
740 	 * Initially use the values set by bootloader. Determine PLL rate and
741 	 * recalculate dependent clocks as if kernel had changed PLL or
742 	 * divisors. See also omap1_clk_late_init() that can reprogram dpll1
743 	 * after the SRAM is initialized.
744 	 */
745 	{
746 		unsigned pll_ctl_val = omap_readw(DPLL_CTL);
747 
748 		ck_dpll1.rate = ck_ref.rate; /* Base xtal rate */
749 		if (pll_ctl_val & 0x10) {
750 			/* PLL enabled, apply multiplier and divisor */
751 			if (pll_ctl_val & 0xf80)
752 				ck_dpll1.rate *= (pll_ctl_val & 0xf80) >> 7;
753 			ck_dpll1.rate /= ((pll_ctl_val & 0x60) >> 5) + 1;
754 		} else {
755 			/* PLL disabled, apply bypass divisor */
756 			switch (pll_ctl_val & 0xc) {
757 			case 0:
758 				break;
759 			case 0x4:
760 				ck_dpll1.rate /= 2;
761 				break;
762 			default:
763 				ck_dpll1.rate /= 4;
764 				break;
765 			}
766 		}
767 	}
768 
769 	/* Amstrad Delta wants BCLK high when inactive */
770 	if (machine_is_ams_delta())
771 		omap_writel(omap_readl(ULPD_CLOCK_CTRL) |
772 				(1 << SDW_MCLK_INV_BIT),
773 				ULPD_CLOCK_CTRL);
774 
775 	/* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */
776 	omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL);
777 
778 	/* Put DSP/MPUI into reset until needed */
779 	omap_writew(0, ARM_RSTCT1);
780 	omap_writew(1, ARM_RSTCT2);
781 	omap_writew(0x400, ARM_IDLECT1);
782 
783 	/*
784 	 * According to OMAP5910 Erratum SYS_DMA_1, bit DMACK_REQ (bit 8)
785 	 * of the ARM_IDLECT2 register must be set to zero. The power-on
786 	 * default value of this bit is one.
787 	 */
788 	omap_writew(0x0000, ARM_IDLECT2);	/* Turn LCD clock off also */
789 
790 	for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++) {
791 		if (!(c->cpu & cpu_mask))
792 			continue;
793 
794 		if (c->lk.clk_hw->init) { /* NULL if provider already registered */
795 			const struct clk_init_data *init = c->lk.clk_hw->init;
796 			const char *name = c->lk.clk_hw->init->name;
797 			int err;
798 
799 			err = clk_hw_register(NULL, c->lk.clk_hw);
800 			if (err < 0) {
801 				pr_err("failed to register clock \"%s\"! (%d)\n", name, err);
802 				/* may be tried again, restore init data */
803 				c->lk.clk_hw->init = init;
804 				continue;
805 			}
806 		}
807 
808 		clk_hw_register_clkdev(c->lk.clk_hw, c->lk.con_id, c->lk.dev_id);
809 	}
810 
811 	omap1_show_rates();
812 
813 	return 0;
814 }
815 
816 #define OMAP1_DPLL1_SANE_VALUE	60000000
817 
omap1_clk_late_init(void)818 void __init omap1_clk_late_init(void)
819 {
820 	unsigned long rate = ck_dpll1.rate;
821 
822 	/* Find the highest supported frequency and enable it */
823 	if (omap1_select_table_rate(&virtual_ck_mpu, ~0, arm_ck.rate)) {
824 		pr_err("System frequencies not set, using default. Check your config.\n");
825 		/*
826 		 * Reprogramming the DPLL is tricky, it must be done from SRAM.
827 		 */
828 		omap_sram_reprogram_clock(0x2290, 0x0005);
829 		ck_dpll1.rate = OMAP1_DPLL1_SANE_VALUE;
830 	}
831 	propagate_rate(&ck_dpll1);
832 	omap1_show_rates();
833 	loops_per_jiffy = cpufreq_scale(loops_per_jiffy, rate, ck_dpll1.rate);
834 }
835