1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * rt5677-spi.c -- RT5677 ALSA SoC audio codec driver
4 *
5 * Copyright 2013 Realtek Semiconductor Corp.
6 * Author: Oder Chiou <oder_chiou@realtek.com>
7 */
8
9 #include <linux/module.h>
10 #include <linux/input.h>
11 #include <linux/spi/spi.h>
12 #include <linux/device.h>
13 #include <linux/init.h>
14 #include <linux/delay.h>
15 #include <linux/interrupt.h>
16 #include <linux/irq.h>
17 #include <linux/slab.h>
18 #include <linux/sched.h>
19 #include <linux/uaccess.h>
20 #include <linux/regulator/consumer.h>
21 #include <linux/pm_qos.h>
22 #include <linux/sysfs.h>
23 #include <linux/clk.h>
24 #include <linux/firmware.h>
25 #include <linux/acpi.h>
26
27 #include <sound/soc.h>
28
29 #include "rt5677.h"
30 #include "rt5677-spi.h"
31
32 #define DRV_NAME "rt5677spi"
33
34 #define RT5677_SPI_BURST_LEN 240
35 #define RT5677_SPI_HEADER 5
36 #define RT5677_SPI_FREQ 6000000
37
38 /* The AddressPhase and DataPhase of SPI commands are MSB first on the wire.
39 * DataPhase word size of 16-bit commands is 2 bytes.
40 * DataPhase word size of 32-bit commands is 4 bytes.
41 * DataPhase word size of burst commands is 8 bytes.
42 * The DSP CPU is little-endian.
43 */
44 #define RT5677_SPI_WRITE_BURST 0x5
45 #define RT5677_SPI_READ_BURST 0x4
46 #define RT5677_SPI_WRITE_32 0x3
47 #define RT5677_SPI_READ_32 0x2
48 #define RT5677_SPI_WRITE_16 0x1
49 #define RT5677_SPI_READ_16 0x0
50
51 #define RT5677_BUF_BYTES_TOTAL 0x20000
52 #define RT5677_MIC_BUF_ADDR 0x60030000
53 #define RT5677_MODEL_ADDR 0x5FFC9800
54 #define RT5677_MIC_BUF_BYTES ((u32)(RT5677_BUF_BYTES_TOTAL - \
55 sizeof(u32)))
56 #define RT5677_MIC_BUF_FIRST_READ_SIZE 0x10000
57
58 static struct spi_device *g_spi;
59 static DEFINE_MUTEX(spi_mutex);
60
61 struct rt5677_dsp {
62 struct device *dev;
63 struct delayed_work copy_work;
64 struct mutex dma_lock;
65 struct snd_pcm_substream *substream;
66 size_t dma_offset; /* zero-based offset into runtime->dma_area */
67 size_t avail_bytes; /* number of new bytes since last period */
68 u32 mic_read_offset; /* zero-based offset into DSP's mic buffer */
69 bool new_hotword; /* a new hotword is fired */
70 };
71
72 static const struct snd_pcm_hardware rt5677_spi_pcm_hardware = {
73 .info = SNDRV_PCM_INFO_MMAP |
74 SNDRV_PCM_INFO_MMAP_VALID |
75 SNDRV_PCM_INFO_INTERLEAVED,
76 .formats = SNDRV_PCM_FMTBIT_S16_LE,
77 .period_bytes_min = PAGE_SIZE,
78 .period_bytes_max = RT5677_BUF_BYTES_TOTAL / 8,
79 .periods_min = 8,
80 .periods_max = 8,
81 .channels_min = 1,
82 .channels_max = 1,
83 .buffer_bytes_max = RT5677_BUF_BYTES_TOTAL,
84 };
85
86 static struct snd_soc_dai_driver rt5677_spi_dai = {
87 /* The DAI name "rt5677-dsp-cpu-dai" is not used. The actual DAI name
88 * registered with ASoC is the name of the device "spi-RT5677AA:00",
89 * because we only have one DAI. See snd_soc_register_dais().
90 */
91 .name = "rt5677-dsp-cpu-dai",
92 .id = 0,
93 .capture = {
94 .stream_name = "DSP Capture",
95 .channels_min = 1,
96 .channels_max = 1,
97 .rates = SNDRV_PCM_RATE_16000,
98 .formats = SNDRV_PCM_FMTBIT_S16_LE,
99 },
100 };
101
102 /* PCM for streaming audio from the DSP buffer */
rt5677_spi_pcm_open(struct snd_soc_component * component,struct snd_pcm_substream * substream)103 static int rt5677_spi_pcm_open(
104 struct snd_soc_component *component,
105 struct snd_pcm_substream *substream)
106 {
107 snd_soc_set_runtime_hwparams(substream, &rt5677_spi_pcm_hardware);
108 return 0;
109 }
110
rt5677_spi_pcm_close(struct snd_soc_component * component,struct snd_pcm_substream * substream)111 static int rt5677_spi_pcm_close(
112 struct snd_soc_component *component,
113 struct snd_pcm_substream *substream)
114 {
115 struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream);
116 struct snd_soc_component *codec_component =
117 snd_soc_rtdcom_lookup(rtd, "rt5677");
118 struct rt5677_priv *rt5677 =
119 snd_soc_component_get_drvdata(codec_component);
120 struct rt5677_dsp *rt5677_dsp =
121 snd_soc_component_get_drvdata(component);
122
123 cancel_delayed_work_sync(&rt5677_dsp->copy_work);
124 rt5677->set_dsp_vad(codec_component, false);
125 return 0;
126 }
127
rt5677_spi_hw_params(struct snd_soc_component * component,struct snd_pcm_substream * substream,struct snd_pcm_hw_params * hw_params)128 static int rt5677_spi_hw_params(
129 struct snd_soc_component *component,
130 struct snd_pcm_substream *substream,
131 struct snd_pcm_hw_params *hw_params)
132 {
133 struct rt5677_dsp *rt5677_dsp =
134 snd_soc_component_get_drvdata(component);
135
136 mutex_lock(&rt5677_dsp->dma_lock);
137 rt5677_dsp->substream = substream;
138 mutex_unlock(&rt5677_dsp->dma_lock);
139
140 return 0;
141 }
142
rt5677_spi_hw_free(struct snd_soc_component * component,struct snd_pcm_substream * substream)143 static int rt5677_spi_hw_free(
144 struct snd_soc_component *component,
145 struct snd_pcm_substream *substream)
146 {
147 struct rt5677_dsp *rt5677_dsp =
148 snd_soc_component_get_drvdata(component);
149
150 mutex_lock(&rt5677_dsp->dma_lock);
151 rt5677_dsp->substream = NULL;
152 mutex_unlock(&rt5677_dsp->dma_lock);
153
154 return 0;
155 }
156
rt5677_spi_prepare(struct snd_soc_component * component,struct snd_pcm_substream * substream)157 static int rt5677_spi_prepare(
158 struct snd_soc_component *component,
159 struct snd_pcm_substream *substream)
160 {
161 struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream);
162 struct snd_soc_component *rt5677_component =
163 snd_soc_rtdcom_lookup(rtd, "rt5677");
164 struct rt5677_priv *rt5677 =
165 snd_soc_component_get_drvdata(rt5677_component);
166 struct rt5677_dsp *rt5677_dsp =
167 snd_soc_component_get_drvdata(component);
168
169 rt5677->set_dsp_vad(rt5677_component, true);
170 rt5677_dsp->dma_offset = 0;
171 rt5677_dsp->avail_bytes = 0;
172 return 0;
173 }
174
rt5677_spi_pcm_pointer(struct snd_soc_component * component,struct snd_pcm_substream * substream)175 static snd_pcm_uframes_t rt5677_spi_pcm_pointer(
176 struct snd_soc_component *component,
177 struct snd_pcm_substream *substream)
178 {
179 struct snd_pcm_runtime *runtime = substream->runtime;
180 struct rt5677_dsp *rt5677_dsp =
181 snd_soc_component_get_drvdata(component);
182
183 return bytes_to_frames(runtime, rt5677_dsp->dma_offset);
184 }
185
rt5677_spi_mic_write_offset(u32 * mic_write_offset)186 static int rt5677_spi_mic_write_offset(u32 *mic_write_offset)
187 {
188 int ret;
189 /* Grab the first 4 bytes that hold the write pointer on the
190 * dsp, and check to make sure that it points somewhere inside the
191 * buffer.
192 */
193 ret = rt5677_spi_read(RT5677_MIC_BUF_ADDR, mic_write_offset,
194 sizeof(u32));
195 if (ret)
196 return ret;
197 /* Adjust the offset so that it's zero-based */
198 *mic_write_offset = *mic_write_offset - sizeof(u32);
199 return *mic_write_offset < RT5677_MIC_BUF_BYTES ? 0 : -EFAULT;
200 }
201
202 /*
203 * Copy one contiguous block of audio samples from the DSP mic buffer to the
204 * dma_area of the pcm runtime. The receiving buffer may wrap around.
205 * @begin: start offset of the block to copy, in bytes.
206 * @end: offset of the first byte after the block to copy, must be greater
207 * than or equal to begin.
208 *
209 * Return: Zero if successful, or a negative error code on failure.
210 */
rt5677_spi_copy_block(struct rt5677_dsp * rt5677_dsp,u32 begin,u32 end)211 static int rt5677_spi_copy_block(struct rt5677_dsp *rt5677_dsp,
212 u32 begin, u32 end)
213 {
214 struct snd_pcm_runtime *runtime = rt5677_dsp->substream->runtime;
215 size_t bytes_per_frame = frames_to_bytes(runtime, 1);
216 size_t first_chunk_len, second_chunk_len;
217 int ret;
218
219 if (begin > end || runtime->dma_bytes < 2 * bytes_per_frame) {
220 dev_err(rt5677_dsp->dev,
221 "Invalid copy from (%u, %u), dma_area size %zu\n",
222 begin, end, runtime->dma_bytes);
223 return -EINVAL;
224 }
225
226 /* The block to copy is empty */
227 if (begin == end)
228 return 0;
229
230 /* If the incoming chunk is too big for the receiving buffer, only the
231 * last "receiving buffer size - one frame" bytes are copied.
232 */
233 if (end - begin > runtime->dma_bytes - bytes_per_frame)
234 begin = end - (runtime->dma_bytes - bytes_per_frame);
235
236 /* May need to split to two chunks, calculate the size of each */
237 first_chunk_len = end - begin;
238 second_chunk_len = 0;
239 if (rt5677_dsp->dma_offset + first_chunk_len > runtime->dma_bytes) {
240 /* Receiving buffer wrapped around */
241 second_chunk_len = first_chunk_len;
242 first_chunk_len = runtime->dma_bytes - rt5677_dsp->dma_offset;
243 second_chunk_len -= first_chunk_len;
244 }
245
246 /* Copy first chunk */
247 ret = rt5677_spi_read(RT5677_MIC_BUF_ADDR + sizeof(u32) + begin,
248 runtime->dma_area + rt5677_dsp->dma_offset,
249 first_chunk_len);
250 if (ret)
251 return ret;
252 rt5677_dsp->dma_offset += first_chunk_len;
253 if (rt5677_dsp->dma_offset == runtime->dma_bytes)
254 rt5677_dsp->dma_offset = 0;
255
256 /* Copy second chunk */
257 if (second_chunk_len) {
258 ret = rt5677_spi_read(RT5677_MIC_BUF_ADDR + sizeof(u32) +
259 begin + first_chunk_len, runtime->dma_area,
260 second_chunk_len);
261 if (!ret)
262 rt5677_dsp->dma_offset = second_chunk_len;
263 }
264 return ret;
265 }
266
267 /*
268 * Copy a given amount of audio samples from the DSP mic buffer starting at
269 * mic_read_offset, to the dma_area of the pcm runtime. The source buffer may
270 * wrap around. mic_read_offset is updated after successful copy.
271 * @amount: amount of samples to copy, in bytes.
272 *
273 * Return: Zero if successful, or a negative error code on failure.
274 */
rt5677_spi_copy(struct rt5677_dsp * rt5677_dsp,u32 amount)275 static int rt5677_spi_copy(struct rt5677_dsp *rt5677_dsp, u32 amount)
276 {
277 int ret = 0;
278 u32 target;
279
280 if (amount == 0)
281 return ret;
282
283 target = rt5677_dsp->mic_read_offset + amount;
284 /* Copy the first chunk in DSP's mic buffer */
285 ret |= rt5677_spi_copy_block(rt5677_dsp, rt5677_dsp->mic_read_offset,
286 min(target, RT5677_MIC_BUF_BYTES));
287
288 if (target >= RT5677_MIC_BUF_BYTES) {
289 /* Wrap around, copy the second chunk */
290 target -= RT5677_MIC_BUF_BYTES;
291 ret |= rt5677_spi_copy_block(rt5677_dsp, 0, target);
292 }
293
294 if (!ret)
295 rt5677_dsp->mic_read_offset = target;
296 return ret;
297 }
298
299 /*
300 * A delayed work that streams audio samples from the DSP mic buffer to the
301 * dma_area of the pcm runtime via SPI.
302 */
rt5677_spi_copy_work(struct work_struct * work)303 static void rt5677_spi_copy_work(struct work_struct *work)
304 {
305 struct rt5677_dsp *rt5677_dsp =
306 container_of(work, struct rt5677_dsp, copy_work.work);
307 struct snd_pcm_runtime *runtime;
308 u32 mic_write_offset;
309 size_t new_bytes, copy_bytes, period_bytes;
310 unsigned int delay;
311 int ret = 0;
312
313 /* Ensure runtime->dma_area buffer does not go away while copying. */
314 mutex_lock(&rt5677_dsp->dma_lock);
315 if (!rt5677_dsp->substream) {
316 dev_err(rt5677_dsp->dev, "No pcm substream\n");
317 goto done;
318 }
319
320 runtime = rt5677_dsp->substream->runtime;
321
322 if (rt5677_spi_mic_write_offset(&mic_write_offset)) {
323 dev_err(rt5677_dsp->dev, "No mic_write_offset\n");
324 goto done;
325 }
326
327 /* If this is the first time that we've asked for streaming data after
328 * a hotword is fired, we should start reading from the previous 2
329 * seconds of audio from wherever the mic_write_offset is currently.
330 */
331 if (rt5677_dsp->new_hotword) {
332 rt5677_dsp->new_hotword = false;
333 /* See if buffer wraparound happens */
334 if (mic_write_offset < RT5677_MIC_BUF_FIRST_READ_SIZE)
335 rt5677_dsp->mic_read_offset = RT5677_MIC_BUF_BYTES -
336 (RT5677_MIC_BUF_FIRST_READ_SIZE -
337 mic_write_offset);
338 else
339 rt5677_dsp->mic_read_offset = mic_write_offset -
340 RT5677_MIC_BUF_FIRST_READ_SIZE;
341 }
342
343 /* Calculate the amount of new samples in bytes */
344 if (rt5677_dsp->mic_read_offset <= mic_write_offset)
345 new_bytes = mic_write_offset - rt5677_dsp->mic_read_offset;
346 else
347 new_bytes = RT5677_MIC_BUF_BYTES + mic_write_offset
348 - rt5677_dsp->mic_read_offset;
349
350 /* Copy all new samples from DSP mic buffer, one period at a time */
351 period_bytes = snd_pcm_lib_period_bytes(rt5677_dsp->substream);
352 while (new_bytes) {
353 copy_bytes = min(new_bytes, period_bytes
354 - rt5677_dsp->avail_bytes);
355 ret = rt5677_spi_copy(rt5677_dsp, copy_bytes);
356 if (ret) {
357 dev_err(rt5677_dsp->dev, "Copy failed %d\n", ret);
358 goto done;
359 }
360 rt5677_dsp->avail_bytes += copy_bytes;
361 if (rt5677_dsp->avail_bytes >= period_bytes) {
362 snd_pcm_period_elapsed(rt5677_dsp->substream);
363 rt5677_dsp->avail_bytes = 0;
364 }
365 new_bytes -= copy_bytes;
366 }
367
368 delay = bytes_to_frames(runtime, period_bytes) / (runtime->rate / 1000);
369 schedule_delayed_work(&rt5677_dsp->copy_work, msecs_to_jiffies(delay));
370 done:
371 mutex_unlock(&rt5677_dsp->dma_lock);
372 }
373
rt5677_spi_pcm_new(struct snd_soc_component * component,struct snd_soc_pcm_runtime * rtd)374 static int rt5677_spi_pcm_new(struct snd_soc_component *component,
375 struct snd_soc_pcm_runtime *rtd)
376 {
377 snd_pcm_set_managed_buffer_all(rtd->pcm, SNDRV_DMA_TYPE_VMALLOC,
378 NULL, 0, 0);
379 return 0;
380 }
381
rt5677_spi_pcm_probe(struct snd_soc_component * component)382 static int rt5677_spi_pcm_probe(struct snd_soc_component *component)
383 {
384 struct rt5677_dsp *rt5677_dsp;
385
386 rt5677_dsp = devm_kzalloc(component->dev, sizeof(*rt5677_dsp),
387 GFP_KERNEL);
388 if (!rt5677_dsp)
389 return -ENOMEM;
390 rt5677_dsp->dev = &g_spi->dev;
391 mutex_init(&rt5677_dsp->dma_lock);
392 INIT_DELAYED_WORK(&rt5677_dsp->copy_work, rt5677_spi_copy_work);
393
394 snd_soc_component_set_drvdata(component, rt5677_dsp);
395 return 0;
396 }
397
398 static const struct snd_soc_component_driver rt5677_spi_dai_component = {
399 .name = DRV_NAME,
400 .probe = rt5677_spi_pcm_probe,
401 .open = rt5677_spi_pcm_open,
402 .close = rt5677_spi_pcm_close,
403 .hw_params = rt5677_spi_hw_params,
404 .hw_free = rt5677_spi_hw_free,
405 .prepare = rt5677_spi_prepare,
406 .pointer = rt5677_spi_pcm_pointer,
407 .pcm_construct = rt5677_spi_pcm_new,
408 .legacy_dai_naming = 1,
409 };
410
411 /* Select a suitable transfer command for the next transfer to ensure
412 * the transfer address is always naturally aligned while minimizing
413 * the total number of transfers required.
414 *
415 * 3 transfer commands are available:
416 * RT5677_SPI_READ/WRITE_16: Transfer 2 bytes
417 * RT5677_SPI_READ/WRITE_32: Transfer 4 bytes
418 * RT5677_SPI_READ/WRITE_BURST: Transfer any multiples of 8 bytes
419 *
420 * Note:
421 * 16 Bit writes and reads are restricted to the address range
422 * 0x18020000 ~ 0x18021000
423 *
424 * For example, reading 256 bytes at 0x60030004 uses the following commands:
425 * 0x60030004 RT5677_SPI_READ_32 4 bytes
426 * 0x60030008 RT5677_SPI_READ_BURST 240 bytes
427 * 0x600300F8 RT5677_SPI_READ_BURST 8 bytes
428 * 0x60030100 RT5677_SPI_READ_32 4 bytes
429 *
430 * Input:
431 * @read: true for read commands; false for write commands
432 * @align: alignment of the next transfer address
433 * @remain: number of bytes remaining to transfer
434 *
435 * Output:
436 * @len: number of bytes to transfer with the selected command
437 * Returns the selected command
438 */
rt5677_spi_select_cmd(bool read,u32 align,u32 remain,u32 * len)439 static u8 rt5677_spi_select_cmd(bool read, u32 align, u32 remain, u32 *len)
440 {
441 u8 cmd;
442
443 if (align == 4 || remain <= 4) {
444 cmd = RT5677_SPI_READ_32;
445 *len = 4;
446 } else {
447 cmd = RT5677_SPI_READ_BURST;
448 *len = (((remain - 1) >> 3) + 1) << 3;
449 *len = min_t(u32, *len, RT5677_SPI_BURST_LEN);
450 }
451 return read ? cmd : cmd + 1;
452 }
453
454 /* Copy dstlen bytes from src to dst, while reversing byte order for each word.
455 * If srclen < dstlen, zeros are padded.
456 */
rt5677_spi_reverse(u8 * dst,u32 dstlen,const u8 * src,u32 srclen)457 static void rt5677_spi_reverse(u8 *dst, u32 dstlen, const u8 *src, u32 srclen)
458 {
459 u32 w, i, si;
460 u32 word_size = min_t(u32, dstlen, 8);
461
462 for (w = 0; w < dstlen; w += word_size) {
463 for (i = 0; i < word_size && i + w < dstlen; i++) {
464 si = w + word_size - i - 1;
465 dst[w + i] = si < srclen ? src[si] : 0;
466 }
467 }
468 }
469
470 /* Read DSP address space using SPI. addr and len have to be 4-byte aligned. */
rt5677_spi_read(u32 addr,void * rxbuf,size_t len)471 int rt5677_spi_read(u32 addr, void *rxbuf, size_t len)
472 {
473 u32 offset;
474 int status = 0;
475 struct spi_transfer t[2];
476 struct spi_message m;
477 /* +4 bytes is for the DummyPhase following the AddressPhase */
478 u8 header[RT5677_SPI_HEADER + 4];
479 u8 body[RT5677_SPI_BURST_LEN];
480 u8 spi_cmd;
481 u8 *cb = rxbuf;
482
483 if (!g_spi)
484 return -ENODEV;
485
486 if ((addr & 3) || (len & 3)) {
487 dev_err(&g_spi->dev, "Bad read align 0x%x(%zu)\n", addr, len);
488 return -EACCES;
489 }
490
491 memset(t, 0, sizeof(t));
492 t[0].tx_buf = header;
493 t[0].len = sizeof(header);
494 t[0].speed_hz = RT5677_SPI_FREQ;
495 t[1].rx_buf = body;
496 t[1].speed_hz = RT5677_SPI_FREQ;
497 spi_message_init_with_transfers(&m, t, ARRAY_SIZE(t));
498
499 for (offset = 0; offset < len; offset += t[1].len) {
500 spi_cmd = rt5677_spi_select_cmd(true, (addr + offset) & 7,
501 len - offset, &t[1].len);
502
503 /* Construct SPI message header */
504 header[0] = spi_cmd;
505 header[1] = ((addr + offset) & 0xff000000) >> 24;
506 header[2] = ((addr + offset) & 0x00ff0000) >> 16;
507 header[3] = ((addr + offset) & 0x0000ff00) >> 8;
508 header[4] = ((addr + offset) & 0x000000ff) >> 0;
509
510 mutex_lock(&spi_mutex);
511 status |= spi_sync(g_spi, &m);
512 mutex_unlock(&spi_mutex);
513
514
515 /* Copy data back to caller buffer */
516 rt5677_spi_reverse(cb + offset, len - offset, body, t[1].len);
517 }
518 return status;
519 }
520 EXPORT_SYMBOL_GPL(rt5677_spi_read);
521
522 /* Write DSP address space using SPI. addr has to be 4-byte aligned.
523 * If len is not 4-byte aligned, then extra zeros are written at the end
524 * as padding.
525 */
rt5677_spi_write(u32 addr,const void * txbuf,size_t len)526 int rt5677_spi_write(u32 addr, const void *txbuf, size_t len)
527 {
528 u32 offset;
529 int status = 0;
530 struct spi_transfer t;
531 struct spi_message m;
532 /* +1 byte is for the DummyPhase following the DataPhase */
533 u8 buf[RT5677_SPI_HEADER + RT5677_SPI_BURST_LEN + 1];
534 u8 *body = buf + RT5677_SPI_HEADER;
535 u8 spi_cmd;
536 const u8 *cb = txbuf;
537
538 if (!g_spi)
539 return -ENODEV;
540
541 if (addr & 3) {
542 dev_err(&g_spi->dev, "Bad write align 0x%x(%zu)\n", addr, len);
543 return -EACCES;
544 }
545
546 memset(&t, 0, sizeof(t));
547 t.tx_buf = buf;
548 t.speed_hz = RT5677_SPI_FREQ;
549 spi_message_init_with_transfers(&m, &t, 1);
550
551 for (offset = 0; offset < len;) {
552 spi_cmd = rt5677_spi_select_cmd(false, (addr + offset) & 7,
553 len - offset, &t.len);
554
555 /* Construct SPI message header */
556 buf[0] = spi_cmd;
557 buf[1] = ((addr + offset) & 0xff000000) >> 24;
558 buf[2] = ((addr + offset) & 0x00ff0000) >> 16;
559 buf[3] = ((addr + offset) & 0x0000ff00) >> 8;
560 buf[4] = ((addr + offset) & 0x000000ff) >> 0;
561
562 /* Fetch data from caller buffer */
563 rt5677_spi_reverse(body, t.len, cb + offset, len - offset);
564 offset += t.len;
565 t.len += RT5677_SPI_HEADER + 1;
566
567 mutex_lock(&spi_mutex);
568 status |= spi_sync(g_spi, &m);
569 mutex_unlock(&spi_mutex);
570 }
571 return status;
572 }
573 EXPORT_SYMBOL_GPL(rt5677_spi_write);
574
rt5677_spi_write_firmware(u32 addr,const struct firmware * fw)575 int rt5677_spi_write_firmware(u32 addr, const struct firmware *fw)
576 {
577 return rt5677_spi_write(addr, fw->data, fw->size);
578 }
579 EXPORT_SYMBOL_GPL(rt5677_spi_write_firmware);
580
rt5677_spi_hotword_detected(void)581 void rt5677_spi_hotword_detected(void)
582 {
583 struct rt5677_dsp *rt5677_dsp;
584
585 if (!g_spi)
586 return;
587
588 rt5677_dsp = dev_get_drvdata(&g_spi->dev);
589 if (!rt5677_dsp) {
590 dev_err(&g_spi->dev, "Can't get rt5677_dsp\n");
591 return;
592 }
593
594 mutex_lock(&rt5677_dsp->dma_lock);
595 dev_info(rt5677_dsp->dev, "Hotword detected\n");
596 rt5677_dsp->new_hotword = true;
597 mutex_unlock(&rt5677_dsp->dma_lock);
598
599 schedule_delayed_work(&rt5677_dsp->copy_work, 0);
600 }
601 EXPORT_SYMBOL_GPL(rt5677_spi_hotword_detected);
602
rt5677_spi_probe(struct spi_device * spi)603 static int rt5677_spi_probe(struct spi_device *spi)
604 {
605 int ret;
606
607 g_spi = spi;
608
609 ret = devm_snd_soc_register_component(&spi->dev,
610 &rt5677_spi_dai_component,
611 &rt5677_spi_dai, 1);
612 if (ret < 0)
613 dev_err(&spi->dev, "Failed to register component.\n");
614
615 return ret;
616 }
617
618 #ifdef CONFIG_ACPI
619 static const struct acpi_device_id rt5677_spi_acpi_id[] = {
620 { "RT5677AA", 0 },
621 { }
622 };
623 MODULE_DEVICE_TABLE(acpi, rt5677_spi_acpi_id);
624 #endif
625
626 static struct spi_driver rt5677_spi_driver = {
627 .driver = {
628 .name = DRV_NAME,
629 .acpi_match_table = ACPI_PTR(rt5677_spi_acpi_id),
630 },
631 .probe = rt5677_spi_probe,
632 };
633 module_spi_driver(rt5677_spi_driver);
634
635 MODULE_DESCRIPTION("ASoC RT5677 SPI driver");
636 MODULE_AUTHOR("Oder Chiou <oder_chiou@realtek.com>");
637 MODULE_LICENSE("GPL v2");
638