1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Asia Better Technology Ltd. Y030XX067A IPS LCD panel driver
4 *
5 * Copyright (C) 2020, Paul Cercueil <paul@crapouillou.net>
6 * Copyright (C) 2020, Christophe Branchereau <cbranchereau@gmail.com>
7 */
8
9 #include <linux/delay.h>
10 #include <linux/device.h>
11 #include <linux/gpio/consumer.h>
12 #include <linux/media-bus-format.h>
13 #include <linux/module.h>
14 #include <linux/of.h>
15 #include <linux/platform_device.h>
16 #include <linux/regmap.h>
17 #include <linux/regulator/consumer.h>
18 #include <linux/spi/spi.h>
19
20 #include <drm/drm_modes.h>
21 #include <drm/drm_panel.h>
22
23 #define REG00_VBRT_CTRL(val) (val)
24
25 #define REG01_COM_DC(val) (val)
26
27 #define REG02_DA_CONTRAST(val) (val)
28 #define REG02_VESA_SEL(val) ((val) << 5)
29 #define REG02_COMDC_SW BIT(7)
30
31 #define REG03_VPOSITION(val) (val)
32 #define REG03_BSMOUNT BIT(5)
33 #define REG03_COMTST BIT(6)
34 #define REG03_HPOSITION1 BIT(7)
35
36 #define REG04_HPOSITION1(val) (val)
37
38 #define REG05_CLIP BIT(0)
39 #define REG05_NVM_VREFRESH BIT(1)
40 #define REG05_SLFR BIT(2)
41 #define REG05_SLBRCHARGE(val) ((val) << 3)
42 #define REG05_PRECHARGE_LEVEL(val) ((val) << 6)
43
44 #define REG06_TEST5 BIT(0)
45 #define REG06_SLDWN BIT(1)
46 #define REG06_SLRGT BIT(2)
47 #define REG06_TEST2 BIT(3)
48 #define REG06_XPSAVE BIT(4)
49 #define REG06_GAMMA_SEL(val) ((val) << 5)
50 #define REG06_NT BIT(7)
51
52 #define REG07_TEST1 BIT(0)
53 #define REG07_HDVD_POL BIT(1)
54 #define REG07_CK_POL BIT(2)
55 #define REG07_TEST3 BIT(3)
56 #define REG07_TEST4 BIT(4)
57 #define REG07_480_LINEMASK BIT(5)
58 #define REG07_AMPTST(val) ((val) << 6)
59
60 #define REG08_SLHRC(val) (val)
61 #define REG08_CLOCK_DIV(val) ((val) << 2)
62 #define REG08_PANEL(val) ((val) << 5)
63
64 #define REG09_SUB_BRIGHT_R(val) (val)
65 #define REG09_NW_NB BIT(6)
66 #define REG09_IPCON BIT(7)
67
68 #define REG0A_SUB_BRIGHT_B(val) (val)
69 #define REG0A_PAIR BIT(6)
70 #define REG0A_DE_SEL BIT(7)
71
72 #define REG0B_MBK_POSITION(val) (val)
73 #define REG0B_HD_FREERUN BIT(4)
74 #define REG0B_VD_FREERUN BIT(5)
75 #define REG0B_YUV2BIN(val) ((val) << 6)
76
77 #define REG0C_CONTRAST_R(val) (val)
78 #define REG0C_DOUBLEREAD BIT(7)
79
80 #define REG0D_CONTRAST_G(val) (val)
81 #define REG0D_RGB_YUV BIT(7)
82
83 #define REG0E_CONTRAST_B(val) (val)
84 #define REG0E_PIXELCOLORDRIVE BIT(7)
85
86 #define REG0F_ASPECT BIT(0)
87 #define REG0F_OVERSCAN(val) ((val) << 1)
88 #define REG0F_FRAMEWIDTH(val) ((val) << 3)
89
90 #define REG10_BRIGHT(val) (val)
91
92 #define REG11_SIG_GAIN(val) (val)
93 #define REG11_SIGC_CNTL BIT(6)
94 #define REG11_SIGC_POL BIT(7)
95
96 #define REG12_COLOR(val) (val)
97 #define REG12_PWCKSEL(val) ((val) << 6)
98
99 #define REG13_4096LEVEL_CNTL(val) (val)
100 #define REG13_SL4096(val) ((val) << 4)
101 #define REG13_LIMITER_CONTROL BIT(7)
102
103 #define REG14_PANEL_TEST(val) (val)
104
105 #define REG15_NVM_LINK0 BIT(0)
106 #define REG15_NVM_LINK1 BIT(1)
107 #define REG15_NVM_LINK2 BIT(2)
108 #define REG15_NVM_LINK3 BIT(3)
109 #define REG15_NVM_LINK4 BIT(4)
110 #define REG15_NVM_LINK5 BIT(5)
111 #define REG15_NVM_LINK6 BIT(6)
112 #define REG15_NVM_LINK7 BIT(7)
113
114 struct y030xx067a_info {
115 const struct drm_display_mode *display_modes;
116 unsigned int num_modes;
117 u16 width_mm, height_mm;
118 u32 bus_format, bus_flags;
119 };
120
121 struct y030xx067a {
122 struct drm_panel panel;
123 struct spi_device *spi;
124 struct regmap *map;
125
126 const struct y030xx067a_info *panel_info;
127
128 struct regulator *supply;
129 struct gpio_desc *reset_gpio;
130 };
131
to_y030xx067a(struct drm_panel * panel)132 static inline struct y030xx067a *to_y030xx067a(struct drm_panel *panel)
133 {
134 return container_of(panel, struct y030xx067a, panel);
135 }
136
137 static const struct reg_sequence y030xx067a_init_sequence[] = {
138 { 0x00, REG00_VBRT_CTRL(0x7f) },
139 { 0x01, REG01_COM_DC(0x3c) },
140 { 0x02, REG02_VESA_SEL(0x3) | REG02_DA_CONTRAST(0x1f) },
141 { 0x03, REG03_VPOSITION(0x0a) },
142 { 0x04, REG04_HPOSITION1(0xd2) },
143 { 0x05, REG05_CLIP | REG05_NVM_VREFRESH | REG05_SLBRCHARGE(0x2) },
144 { 0x06, REG06_NT },
145 { 0x07, 0 },
146 { 0x08, REG08_PANEL(0x1) | REG08_CLOCK_DIV(0x2) },
147 { 0x09, REG09_SUB_BRIGHT_R(0x20) },
148 { 0x0a, REG0A_SUB_BRIGHT_B(0x20) },
149 { 0x0b, REG0B_HD_FREERUN | REG0B_VD_FREERUN },
150 { 0x0c, REG0C_CONTRAST_R(0x00) },
151 { 0x0d, REG0D_CONTRAST_G(0x00) },
152 { 0x0e, REG0E_CONTRAST_B(0x10) },
153 { 0x0f, 0 },
154 { 0x10, REG10_BRIGHT(0x7f) },
155 { 0x11, REG11_SIGC_CNTL | REG11_SIG_GAIN(0x3f) },
156 { 0x12, REG12_COLOR(0x20) | REG12_PWCKSEL(0x1) },
157 { 0x13, REG13_4096LEVEL_CNTL(0x8) },
158 { 0x14, 0 },
159 { 0x15, 0 },
160 };
161
y030xx067a_prepare(struct drm_panel * panel)162 static int y030xx067a_prepare(struct drm_panel *panel)
163 {
164 struct y030xx067a *priv = to_y030xx067a(panel);
165 struct device *dev = &priv->spi->dev;
166 int err;
167
168 err = regulator_enable(priv->supply);
169 if (err) {
170 dev_err(dev, "Failed to enable power supply: %d\n", err);
171 return err;
172 }
173
174 /* Reset the chip */
175 gpiod_set_value_cansleep(priv->reset_gpio, 1);
176 usleep_range(1000, 20000);
177 gpiod_set_value_cansleep(priv->reset_gpio, 0);
178 usleep_range(1000, 20000);
179
180 err = regmap_multi_reg_write(priv->map, y030xx067a_init_sequence,
181 ARRAY_SIZE(y030xx067a_init_sequence));
182 if (err) {
183 dev_err(dev, "Failed to init registers: %d\n", err);
184 goto err_disable_regulator;
185 }
186
187 return 0;
188
189 err_disable_regulator:
190 regulator_disable(priv->supply);
191 return err;
192 }
193
y030xx067a_unprepare(struct drm_panel * panel)194 static int y030xx067a_unprepare(struct drm_panel *panel)
195 {
196 struct y030xx067a *priv = to_y030xx067a(panel);
197
198 gpiod_set_value_cansleep(priv->reset_gpio, 1);
199 regulator_disable(priv->supply);
200
201 return 0;
202 }
203
y030xx067a_enable(struct drm_panel * panel)204 static int y030xx067a_enable(struct drm_panel *panel)
205 {
206 struct y030xx067a *priv = to_y030xx067a(panel);
207
208 regmap_set_bits(priv->map, 0x06, REG06_XPSAVE);
209
210 if (panel->backlight) {
211 /* Wait for the picture to be ready before enabling backlight */
212 msleep(120);
213 }
214
215 return 0;
216 }
217
y030xx067a_disable(struct drm_panel * panel)218 static int y030xx067a_disable(struct drm_panel *panel)
219 {
220 struct y030xx067a *priv = to_y030xx067a(panel);
221
222 regmap_clear_bits(priv->map, 0x06, REG06_XPSAVE);
223
224 return 0;
225 }
226
y030xx067a_get_modes(struct drm_panel * panel,struct drm_connector * connector)227 static int y030xx067a_get_modes(struct drm_panel *panel,
228 struct drm_connector *connector)
229 {
230 struct y030xx067a *priv = to_y030xx067a(panel);
231 const struct y030xx067a_info *panel_info = priv->panel_info;
232 struct drm_display_mode *mode;
233 unsigned int i;
234
235 for (i = 0; i < panel_info->num_modes; i++) {
236 mode = drm_mode_duplicate(connector->dev,
237 &panel_info->display_modes[i]);
238 if (!mode)
239 return -ENOMEM;
240
241 drm_mode_set_name(mode);
242
243 mode->type = DRM_MODE_TYPE_DRIVER;
244 if (panel_info->num_modes == 1)
245 mode->type |= DRM_MODE_TYPE_PREFERRED;
246
247 drm_mode_probed_add(connector, mode);
248 }
249
250 connector->display_info.bpc = 8;
251 connector->display_info.width_mm = panel_info->width_mm;
252 connector->display_info.height_mm = panel_info->height_mm;
253
254 drm_display_info_set_bus_formats(&connector->display_info,
255 &panel_info->bus_format, 1);
256 connector->display_info.bus_flags = panel_info->bus_flags;
257
258 return panel_info->num_modes;
259 }
260
261 static const struct drm_panel_funcs y030xx067a_funcs = {
262 .prepare = y030xx067a_prepare,
263 .unprepare = y030xx067a_unprepare,
264 .enable = y030xx067a_enable,
265 .disable = y030xx067a_disable,
266 .get_modes = y030xx067a_get_modes,
267 };
268
269 static const struct regmap_config y030xx067a_regmap_config = {
270 .reg_bits = 8,
271 .val_bits = 8,
272 .max_register = 0x15,
273 .cache_type = REGCACHE_FLAT,
274 };
275
y030xx067a_probe(struct spi_device * spi)276 static int y030xx067a_probe(struct spi_device *spi)
277 {
278 struct device *dev = &spi->dev;
279 struct y030xx067a *priv;
280 int err;
281
282 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
283 if (!priv)
284 return -ENOMEM;
285
286 priv->spi = spi;
287 spi_set_drvdata(spi, priv);
288
289 priv->map = devm_regmap_init_spi(spi, &y030xx067a_regmap_config);
290 if (IS_ERR(priv->map)) {
291 dev_err(dev, "Unable to init regmap\n");
292 return PTR_ERR(priv->map);
293 }
294
295 priv->panel_info = of_device_get_match_data(dev);
296 if (!priv->panel_info)
297 return -EINVAL;
298
299 priv->supply = devm_regulator_get(dev, "power");
300 if (IS_ERR(priv->supply))
301 return dev_err_probe(dev, PTR_ERR(priv->supply),
302 "Failed to get power supply\n");
303
304 priv->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
305 if (IS_ERR(priv->reset_gpio))
306 return dev_err_probe(dev, PTR_ERR(priv->reset_gpio),
307 "Failed to get reset GPIO\n");
308
309 drm_panel_init(&priv->panel, dev, &y030xx067a_funcs,
310 DRM_MODE_CONNECTOR_DPI);
311
312 err = drm_panel_of_backlight(&priv->panel);
313 if (err)
314 return err;
315
316 drm_panel_add(&priv->panel);
317
318 return 0;
319 }
320
y030xx067a_remove(struct spi_device * spi)321 static void y030xx067a_remove(struct spi_device *spi)
322 {
323 struct y030xx067a *priv = spi_get_drvdata(spi);
324
325 drm_panel_remove(&priv->panel);
326 drm_panel_disable(&priv->panel);
327 drm_panel_unprepare(&priv->panel);
328 }
329
330 static const struct drm_display_mode y030xx067a_modes[] = {
331 { /* 60 Hz */
332 .clock = 14400,
333 .hdisplay = 320,
334 .hsync_start = 320 + 10,
335 .hsync_end = 320 + 10 + 37,
336 .htotal = 320 + 10 + 37 + 33,
337 .vdisplay = 480,
338 .vsync_start = 480 + 84,
339 .vsync_end = 480 + 84 + 20,
340 .vtotal = 480 + 84 + 20 + 16,
341 .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
342 },
343 { /* 50 Hz */
344 .clock = 12000,
345 .hdisplay = 320,
346 .hsync_start = 320 + 10,
347 .hsync_end = 320 + 10 + 37,
348 .htotal = 320 + 10 + 37 + 33,
349 .vdisplay = 480,
350 .vsync_start = 480 + 84,
351 .vsync_end = 480 + 84 + 20,
352 .vtotal = 480 + 84 + 20 + 16,
353 .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
354 },
355 };
356
357 static const struct y030xx067a_info y030xx067a_info = {
358 .display_modes = y030xx067a_modes,
359 .num_modes = ARRAY_SIZE(y030xx067a_modes),
360 .width_mm = 69,
361 .height_mm = 51,
362 .bus_format = MEDIA_BUS_FMT_RGB888_3X8_DELTA,
363 .bus_flags = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE | DRM_BUS_FLAG_DE_LOW,
364 };
365
366 static const struct of_device_id y030xx067a_of_match[] = {
367 { .compatible = "abt,y030xx067a", .data = &y030xx067a_info },
368 { /* sentinel */ }
369 };
370 MODULE_DEVICE_TABLE(of, y030xx067a_of_match);
371
372 static struct spi_driver y030xx067a_driver = {
373 .driver = {
374 .name = "abt-y030xx067a",
375 .of_match_table = y030xx067a_of_match,
376 },
377 .probe = y030xx067a_probe,
378 .remove = y030xx067a_remove,
379 };
380 module_spi_driver(y030xx067a_driver);
381
382 MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>");
383 MODULE_AUTHOR("Christophe Branchereau <cbranchereau@gmail.com>");
384 MODULE_DESCRIPTION("Asia Better Technology Ltd. Y030XX067A IPS LCD panel driver");
385 MODULE_LICENSE("GPL v2");
386