| /linux/drivers/net/ethernet/smsc/ |
| H A D | smc9194.h | 80 #define RCR 4 macro
207 #define SMC_DELAY() { inw( ioaddr + RCR );\
208 inw( ioaddr + RCR );\
209 inw( ioaddr + RCR ); }
|
| H A D | smc9194.c | 324 outw( RCR_SOFTRESET, ioaddr + RCR ); in smc_reset()
331 outw( RCR_CLEAR, ioaddr + RCR ); in smc_reset()
364 outw( RCR_NORMAL, ioaddr + RCR ); in smc_enable()
393 outb( RCR_CLEAR, ioaddr + RCR ); in smc_shutdown()
1458 outw( inw(ioaddr + RCR ) | RCR_PROMISC, ioaddr + RCR ); in smc_set_multicast_list()
1470 outw( inw(ioaddr + RCR ) | RCR_ALMUL, ioaddr + RCR ); in smc_set_multicast_list()
1479 outw( inw( ioaddr + RCR ) & ~(RCR_PROMISC | RCR_ALMUL), in smc_set_multicast_list()
1480 ioaddr + RCR ); in smc_set_multicast_list()
1486 outw( inw( ioaddr + RCR ) & ~(RCR_PROMISC | RCR_ALMUL), in smc_set_multicast_list()
1487 ioaddr + RCR ); in smc_set_multicast_list()
|
| H A D | smc91c92_cs.c | 225 #define RCR 4 macro
1100 mask_bits(0xff00, ioaddr + RCR); in smc_close()
1579 outw(rx_cfg_setting, ioaddr + RCR); in set_rx_mode()
1651 outw(RCR_SOFTRESET, ioaddr + RCR); in smc_reset()
1655 outw(RCR_CLEAR, ioaddr + RCR); in smc_reset()
|
| /linux/sound/soc/intel/keembay/ |
| H A D | kmb_platform.h | 38 #define RCR(x) (0x40 * (x) + 0x030) macro
|
| /linux/drivers/rtc/ |
| H A D | rtc-r9701.c | 38 #define RCR 0x0f /* RTC Control Register */ macro
|
| /linux/sound/soc/dwc/ |
| H A D | local.h | 46 #define RCR(x) (0x40 * x + 0x030) macro
|
| H A D | dwc-i2s.c | 263 i2s_write_reg(dev->i2s_base, RCR(ch_reg), in dw_i2s_config()
|
| /linux/drivers/net/wireless/realtek/rtlwifi/rtl8192se/ |
| H A D | fw.c | 289 tmpu4b = rtl_read_dword(rtlpriv, RCR); in _rtl92s_firmware_checkready()
290 rtl_write_dword(rtlpriv, RCR, (tmpu4b | RCR_APPFCS | in _rtl92s_firmware_checkready()
|
| H A D | hw.c | 285 rtl_write_dword(rtlpriv, RCR, ((u32 *) (val))[0]); in rtl92se_set_hw_reg()
765 rtl_write_dword(rtlpriv, RCR, rtlpci->receive_config); in _rtl92se_macconfig_after_fwdownload()
988 rtlpci->receive_config = rtl_read_dword(rtlpriv, RCR); in rtl92se_hw_init()
990 rtl_write_dword(rtlpriv, RCR, rtlpci->receive_config); in rtl92se_hw_init()
|
| H A D | reg.h | 37 #define RCR 0x0048 macro
|
| /linux/drivers/net/usb/ |
| H A D | rtl8150.c | 25 #define RCR 0x0130 macro
639 set_registers(dev, RCR, 1, &rcr); in enable_net_traffic()
681 async_set_registers(dev, RCR, sizeof(rx_creg), rx_creg); in rtl8150_set_multicast()
|
| /linux/drivers/net/ethernet/microchip/ |
| H A D | encx24j600_hw.h | 66 #define RCR(addr) (RCRCODE | (addr & ADDR_MASK)) /* Read Control Register */ macro
|
| /linux/drivers/net/wan/ |
| H A D | hd64572.h | 105 #define RCR 0x156 /* Rx DMA Critical Request Reg */ macro
|
| /linux/drivers/net/ethernet/via/ |
| H A D | via-velocity.h | 969 volatile u8 RCR; member
|
| /linux/drivers/net/ethernet/renesas/ |
| H A D | ravb_main.c | 621 ravb_write(ndev, 0x60000000, RCR); in ravb_dmac_init_gbeth()
664 RCR_EFFS | RCR_ENCF | RCR_ETS0 | RCR_ESF | 0x18000000, RCR); in ravb_dmac_init_rcar()
|
| /linux/tools/arch/x86/lib/ |
| H A D | x86-opcode-map.txt | 1211 3: RCR
|
| /linux/arch/x86/lib/ |
| H A D | x86-opcode-map.txt | 1211 3: RCR
|