1 // SPDX-License-Identifier: GPL-2.0+
2 /* Broadcom BCM54140 Quad SGMII/QSGMII Copper/Fiber Gigabit PHY
3 *
4 * Copyright (c) 2020 Michael Walle <michael@walle.cc>
5 */
6
7 #include <linux/bitfield.h>
8 #include <linux/brcmphy.h>
9 #include <linux/hwmon.h>
10 #include <linux/module.h>
11 #include <linux/phy.h>
12
13 #include "bcm-phy-lib.h"
14
15 /* RDB per-port registers
16 */
17 #define BCM54140_RDB_ISR 0x00a /* interrupt status */
18 #define BCM54140_RDB_IMR 0x00b /* interrupt mask */
19 #define BCM54140_RDB_INT_LINK BIT(1) /* link status changed */
20 #define BCM54140_RDB_INT_SPEED BIT(2) /* link speed change */
21 #define BCM54140_RDB_INT_DUPLEX BIT(3) /* duplex mode changed */
22 #define BCM54140_RDB_SPARE1 0x012 /* spare control 1 */
23 #define BCM54140_RDB_SPARE1_LSLM BIT(2) /* link speed LED mode */
24 #define BCM54140_RDB_SPARE2 0x014 /* spare control 2 */
25 #define BCM54140_RDB_SPARE2_WS_RTRY_DIS BIT(8) /* wirespeed retry disable */
26 #define BCM54140_RDB_SPARE2_WS_RTRY_LIMIT GENMASK(4, 2) /* retry limit */
27 #define BCM54140_RDB_SPARE3 0x015 /* spare control 3 */
28 #define BCM54140_RDB_SPARE3_BIT0 BIT(0)
29 #define BCM54140_RDB_LED_CTRL 0x019 /* LED control */
30 #define BCM54140_RDB_LED_CTRL_ACTLINK0 BIT(4)
31 #define BCM54140_RDB_LED_CTRL_ACTLINK1 BIT(8)
32 #define BCM54140_RDB_C_APWR 0x01a /* auto power down control */
33 #define BCM54140_RDB_C_APWR_SINGLE_PULSE BIT(8) /* single pulse */
34 #define BCM54140_RDB_C_APWR_APD_MODE_DIS 0 /* ADP disable */
35 #define BCM54140_RDB_C_APWR_APD_MODE_EN 1 /* ADP enable */
36 #define BCM54140_RDB_C_APWR_APD_MODE_DIS2 2 /* ADP disable */
37 #define BCM54140_RDB_C_APWR_APD_MODE_EN_ANEG 3 /* ADP enable w/ aneg */
38 #define BCM54140_RDB_C_APWR_APD_MODE_MASK GENMASK(6, 5)
39 #define BCM54140_RDB_C_APWR_SLP_TIM_MASK BIT(4)/* sleep timer */
40 #define BCM54140_RDB_C_APWR_SLP_TIM_2_7 0 /* 2.7s */
41 #define BCM54140_RDB_C_APWR_SLP_TIM_5_4 1 /* 5.4s */
42 #define BCM54140_RDB_C_PWR 0x02a /* copper power control */
43 #define BCM54140_RDB_C_PWR_ISOLATE BIT(5) /* super isolate mode */
44 #define BCM54140_RDB_C_MISC_CTRL 0x02f /* misc copper control */
45 #define BCM54140_RDB_C_MISC_CTRL_WS_EN BIT(4) /* wirespeed enable */
46
47 /* RDB global registers
48 */
49 #define BCM54140_RDB_TOP_IMR 0x82d /* interrupt mask */
50 #define BCM54140_RDB_TOP_IMR_PORT0 BIT(4)
51 #define BCM54140_RDB_TOP_IMR_PORT1 BIT(5)
52 #define BCM54140_RDB_TOP_IMR_PORT2 BIT(6)
53 #define BCM54140_RDB_TOP_IMR_PORT3 BIT(7)
54 #define BCM54140_RDB_MON_CTRL 0x831 /* monitor control */
55 #define BCM54140_RDB_MON_CTRL_V_MODE BIT(3) /* voltage mode */
56 #define BCM54140_RDB_MON_CTRL_SEL_MASK GENMASK(2, 1)
57 #define BCM54140_RDB_MON_CTRL_SEL_TEMP 0 /* meassure temperature */
58 #define BCM54140_RDB_MON_CTRL_SEL_1V0 1 /* meassure AVDDL 1.0V */
59 #define BCM54140_RDB_MON_CTRL_SEL_3V3 2 /* meassure AVDDH 3.3V */
60 #define BCM54140_RDB_MON_CTRL_SEL_RR 3 /* meassure all round-robin */
61 #define BCM54140_RDB_MON_CTRL_PWR_DOWN BIT(0) /* power-down monitor */
62 #define BCM54140_RDB_MON_TEMP_VAL 0x832 /* temperature value */
63 #define BCM54140_RDB_MON_TEMP_MAX 0x833 /* temperature high thresh */
64 #define BCM54140_RDB_MON_TEMP_MIN 0x834 /* temperature low thresh */
65 #define BCM54140_RDB_MON_TEMP_DATA_MASK GENMASK(9, 0)
66 #define BCM54140_RDB_MON_1V0_VAL 0x835 /* AVDDL 1.0V value */
67 #define BCM54140_RDB_MON_1V0_MAX 0x836 /* AVDDL 1.0V high thresh */
68 #define BCM54140_RDB_MON_1V0_MIN 0x837 /* AVDDL 1.0V low thresh */
69 #define BCM54140_RDB_MON_1V0_DATA_MASK GENMASK(10, 0)
70 #define BCM54140_RDB_MON_3V3_VAL 0x838 /* AVDDH 3.3V value */
71 #define BCM54140_RDB_MON_3V3_MAX 0x839 /* AVDDH 3.3V high thresh */
72 #define BCM54140_RDB_MON_3V3_MIN 0x83a /* AVDDH 3.3V low thresh */
73 #define BCM54140_RDB_MON_3V3_DATA_MASK GENMASK(11, 0)
74 #define BCM54140_RDB_MON_ISR 0x83b /* interrupt status */
75 #define BCM54140_RDB_MON_ISR_3V3 BIT(2) /* AVDDH 3.3V alarm */
76 #define BCM54140_RDB_MON_ISR_1V0 BIT(1) /* AVDDL 1.0V alarm */
77 #define BCM54140_RDB_MON_ISR_TEMP BIT(0) /* temperature alarm */
78
79 /* According to the datasheet the formula is:
80 * T = 413.35 - (0.49055 * bits[9:0])
81 */
82 #define BCM54140_HWMON_TO_TEMP(v) (413350L - (v) * 491)
83 #define BCM54140_HWMON_FROM_TEMP(v) DIV_ROUND_CLOSEST_ULL(413350L - (v), 491)
84
85 /* According to the datasheet the formula is:
86 * U = bits[11:0] / 1024 * 220 / 0.2
87 *
88 * Normalized:
89 * U = bits[11:0] / 4096 * 2514
90 */
91 #define BCM54140_HWMON_TO_IN_1V0(v) ((v) * 2514 >> 11)
92 #define BCM54140_HWMON_FROM_IN_1V0(v) DIV_ROUND_CLOSEST_ULL(((v) << 11), 2514)
93
94 /* According to the datasheet the formula is:
95 * U = bits[10:0] / 1024 * 880 / 0.7
96 *
97 * Normalized:
98 * U = bits[10:0] / 2048 * 4400
99 */
100 #define BCM54140_HWMON_TO_IN_3V3(v) ((v) * 4400 >> 12)
101 #define BCM54140_HWMON_FROM_IN_3V3(v) DIV_ROUND_CLOSEST_ULL(((v) << 12), 4400)
102
103 #define BCM54140_HWMON_TO_IN(ch, v) ((ch) ? BCM54140_HWMON_TO_IN_3V3(v) \
104 : BCM54140_HWMON_TO_IN_1V0(v))
105 #define BCM54140_HWMON_FROM_IN(ch, v) ((ch) ? BCM54140_HWMON_FROM_IN_3V3(v) \
106 : BCM54140_HWMON_FROM_IN_1V0(v))
107 #define BCM54140_HWMON_IN_MASK(ch) ((ch) ? BCM54140_RDB_MON_3V3_DATA_MASK \
108 : BCM54140_RDB_MON_1V0_DATA_MASK)
109 #define BCM54140_HWMON_IN_VAL_REG(ch) ((ch) ? BCM54140_RDB_MON_3V3_VAL \
110 : BCM54140_RDB_MON_1V0_VAL)
111 #define BCM54140_HWMON_IN_MIN_REG(ch) ((ch) ? BCM54140_RDB_MON_3V3_MIN \
112 : BCM54140_RDB_MON_1V0_MIN)
113 #define BCM54140_HWMON_IN_MAX_REG(ch) ((ch) ? BCM54140_RDB_MON_3V3_MAX \
114 : BCM54140_RDB_MON_1V0_MAX)
115 #define BCM54140_HWMON_IN_ALARM_BIT(ch) ((ch) ? BCM54140_RDB_MON_ISR_3V3 \
116 : BCM54140_RDB_MON_ISR_1V0)
117
118 /* This PHY has two different PHY IDs depening on its MODE_SEL pin. This
119 * pin choses between 4x SGMII and QSGMII mode:
120 * AE02_5009 4x SGMII
121 * AE02_5019 QSGMII
122 */
123 #define BCM54140_PHY_ID_MASK 0xffffffe8
124
125 #define BCM54140_PHY_ID_REV(phy_id) ((phy_id) & 0x7)
126 #define BCM54140_REV_B0 1
127
128 #define BCM54140_DEFAULT_DOWNSHIFT 5
129 #define BCM54140_MAX_DOWNSHIFT 9
130
131 enum bcm54140_global_phy {
132 BCM54140_BASE_ADDR = 0,
133 };
134
135 struct bcm54140_priv {
136 int port;
137 int base_addr;
138 #if IS_ENABLED(CONFIG_HWMON)
139 /* protect the alarm bits */
140 struct mutex alarm_lock;
141 u16 alarm;
142 #endif
143 };
144
145 #if IS_ENABLED(CONFIG_HWMON)
bcm54140_hwmon_is_visible(const void * data,enum hwmon_sensor_types type,u32 attr,int channel)146 static umode_t bcm54140_hwmon_is_visible(const void *data,
147 enum hwmon_sensor_types type,
148 u32 attr, int channel)
149 {
150 switch (type) {
151 case hwmon_in:
152 switch (attr) {
153 case hwmon_in_min:
154 case hwmon_in_max:
155 return 0644;
156 case hwmon_in_label:
157 case hwmon_in_input:
158 case hwmon_in_alarm:
159 return 0444;
160 default:
161 return 0;
162 }
163 case hwmon_temp:
164 switch (attr) {
165 case hwmon_temp_min:
166 case hwmon_temp_max:
167 return 0644;
168 case hwmon_temp_input:
169 case hwmon_temp_alarm:
170 return 0444;
171 default:
172 return 0;
173 }
174 default:
175 return 0;
176 }
177 }
178
bcm54140_hwmon_read_alarm(struct device * dev,unsigned int bit,long * val)179 static int bcm54140_hwmon_read_alarm(struct device *dev, unsigned int bit,
180 long *val)
181 {
182 struct phy_device *phydev = dev_get_drvdata(dev);
183 struct bcm54140_priv *priv = phydev->priv;
184 int tmp, ret = 0;
185
186 mutex_lock(&priv->alarm_lock);
187
188 /* latch any alarm bits */
189 tmp = bcm_phy_read_rdb(phydev, BCM54140_RDB_MON_ISR);
190 if (tmp < 0) {
191 ret = tmp;
192 goto out;
193 }
194 priv->alarm |= tmp;
195
196 *val = !!(priv->alarm & bit);
197 priv->alarm &= ~bit;
198
199 out:
200 mutex_unlock(&priv->alarm_lock);
201 return ret;
202 }
203
bcm54140_hwmon_read_temp(struct device * dev,u32 attr,long * val)204 static int bcm54140_hwmon_read_temp(struct device *dev, u32 attr, long *val)
205 {
206 struct phy_device *phydev = dev_get_drvdata(dev);
207 u16 reg;
208 int tmp;
209
210 switch (attr) {
211 case hwmon_temp_input:
212 reg = BCM54140_RDB_MON_TEMP_VAL;
213 break;
214 case hwmon_temp_min:
215 reg = BCM54140_RDB_MON_TEMP_MIN;
216 break;
217 case hwmon_temp_max:
218 reg = BCM54140_RDB_MON_TEMP_MAX;
219 break;
220 case hwmon_temp_alarm:
221 return bcm54140_hwmon_read_alarm(dev,
222 BCM54140_RDB_MON_ISR_TEMP,
223 val);
224 default:
225 return -EOPNOTSUPP;
226 }
227
228 tmp = bcm_phy_read_rdb(phydev, reg);
229 if (tmp < 0)
230 return tmp;
231
232 *val = BCM54140_HWMON_TO_TEMP(tmp & BCM54140_RDB_MON_TEMP_DATA_MASK);
233
234 return 0;
235 }
236
bcm54140_hwmon_read_in(struct device * dev,u32 attr,int channel,long * val)237 static int bcm54140_hwmon_read_in(struct device *dev, u32 attr,
238 int channel, long *val)
239 {
240 struct phy_device *phydev = dev_get_drvdata(dev);
241 u16 bit, reg;
242 int tmp;
243
244 switch (attr) {
245 case hwmon_in_input:
246 reg = BCM54140_HWMON_IN_VAL_REG(channel);
247 break;
248 case hwmon_in_min:
249 reg = BCM54140_HWMON_IN_MIN_REG(channel);
250 break;
251 case hwmon_in_max:
252 reg = BCM54140_HWMON_IN_MAX_REG(channel);
253 break;
254 case hwmon_in_alarm:
255 bit = BCM54140_HWMON_IN_ALARM_BIT(channel);
256 return bcm54140_hwmon_read_alarm(dev, bit, val);
257 default:
258 return -EOPNOTSUPP;
259 }
260
261 tmp = bcm_phy_read_rdb(phydev, reg);
262 if (tmp < 0)
263 return tmp;
264
265 tmp &= BCM54140_HWMON_IN_MASK(channel);
266 *val = BCM54140_HWMON_TO_IN(channel, tmp);
267
268 return 0;
269 }
270
bcm54140_hwmon_read(struct device * dev,enum hwmon_sensor_types type,u32 attr,int channel,long * val)271 static int bcm54140_hwmon_read(struct device *dev,
272 enum hwmon_sensor_types type, u32 attr,
273 int channel, long *val)
274 {
275 switch (type) {
276 case hwmon_temp:
277 return bcm54140_hwmon_read_temp(dev, attr, val);
278 case hwmon_in:
279 return bcm54140_hwmon_read_in(dev, attr, channel, val);
280 default:
281 return -EOPNOTSUPP;
282 }
283 }
284
285 static const char *const bcm54140_hwmon_in_labels[] = {
286 "AVDDL",
287 "AVDDH",
288 };
289
bcm54140_hwmon_read_string(struct device * dev,enum hwmon_sensor_types type,u32 attr,int channel,const char ** str)290 static int bcm54140_hwmon_read_string(struct device *dev,
291 enum hwmon_sensor_types type, u32 attr,
292 int channel, const char **str)
293 {
294 switch (type) {
295 case hwmon_in:
296 switch (attr) {
297 case hwmon_in_label:
298 *str = bcm54140_hwmon_in_labels[channel];
299 return 0;
300 default:
301 return -EOPNOTSUPP;
302 }
303 default:
304 return -EOPNOTSUPP;
305 }
306 }
307
bcm54140_hwmon_write_temp(struct device * dev,u32 attr,int channel,long val)308 static int bcm54140_hwmon_write_temp(struct device *dev, u32 attr,
309 int channel, long val)
310 {
311 struct phy_device *phydev = dev_get_drvdata(dev);
312 u16 mask = BCM54140_RDB_MON_TEMP_DATA_MASK;
313 u16 reg;
314
315 val = clamp_val(val, BCM54140_HWMON_TO_TEMP(mask),
316 BCM54140_HWMON_TO_TEMP(0));
317
318 switch (attr) {
319 case hwmon_temp_min:
320 reg = BCM54140_RDB_MON_TEMP_MIN;
321 break;
322 case hwmon_temp_max:
323 reg = BCM54140_RDB_MON_TEMP_MAX;
324 break;
325 default:
326 return -EOPNOTSUPP;
327 }
328
329 return bcm_phy_modify_rdb(phydev, reg, mask,
330 BCM54140_HWMON_FROM_TEMP(val));
331 }
332
bcm54140_hwmon_write_in(struct device * dev,u32 attr,int channel,long val)333 static int bcm54140_hwmon_write_in(struct device *dev, u32 attr,
334 int channel, long val)
335 {
336 struct phy_device *phydev = dev_get_drvdata(dev);
337 u16 mask = BCM54140_HWMON_IN_MASK(channel);
338 u16 reg;
339
340 val = clamp_val(val, 0, BCM54140_HWMON_TO_IN(channel, mask));
341
342 switch (attr) {
343 case hwmon_in_min:
344 reg = BCM54140_HWMON_IN_MIN_REG(channel);
345 break;
346 case hwmon_in_max:
347 reg = BCM54140_HWMON_IN_MAX_REG(channel);
348 break;
349 default:
350 return -EOPNOTSUPP;
351 }
352
353 return bcm_phy_modify_rdb(phydev, reg, mask,
354 BCM54140_HWMON_FROM_IN(channel, val));
355 }
356
bcm54140_hwmon_write(struct device * dev,enum hwmon_sensor_types type,u32 attr,int channel,long val)357 static int bcm54140_hwmon_write(struct device *dev,
358 enum hwmon_sensor_types type, u32 attr,
359 int channel, long val)
360 {
361 switch (type) {
362 case hwmon_temp:
363 return bcm54140_hwmon_write_temp(dev, attr, channel, val);
364 case hwmon_in:
365 return bcm54140_hwmon_write_in(dev, attr, channel, val);
366 default:
367 return -EOPNOTSUPP;
368 }
369 }
370
371 static const struct hwmon_channel_info * const bcm54140_hwmon_info[] = {
372 HWMON_CHANNEL_INFO(temp,
373 HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
374 HWMON_T_ALARM),
375 HWMON_CHANNEL_INFO(in,
376 HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
377 HWMON_I_ALARM | HWMON_I_LABEL,
378 HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
379 HWMON_I_ALARM | HWMON_I_LABEL),
380 NULL
381 };
382
383 static const struct hwmon_ops bcm54140_hwmon_ops = {
384 .is_visible = bcm54140_hwmon_is_visible,
385 .read = bcm54140_hwmon_read,
386 .read_string = bcm54140_hwmon_read_string,
387 .write = bcm54140_hwmon_write,
388 };
389
390 static const struct hwmon_chip_info bcm54140_chip_info = {
391 .ops = &bcm54140_hwmon_ops,
392 .info = bcm54140_hwmon_info,
393 };
394
bcm54140_enable_monitoring(struct phy_device * phydev)395 static int bcm54140_enable_monitoring(struct phy_device *phydev)
396 {
397 u16 mask, set;
398
399 /* 3.3V voltage mode */
400 set = BCM54140_RDB_MON_CTRL_V_MODE;
401
402 /* select round-robin */
403 mask = BCM54140_RDB_MON_CTRL_SEL_MASK;
404 set |= FIELD_PREP(BCM54140_RDB_MON_CTRL_SEL_MASK,
405 BCM54140_RDB_MON_CTRL_SEL_RR);
406
407 /* remove power-down bit */
408 mask |= BCM54140_RDB_MON_CTRL_PWR_DOWN;
409
410 return bcm_phy_modify_rdb(phydev, BCM54140_RDB_MON_CTRL, mask, set);
411 }
412
bcm54140_probe_once(struct phy_device * phydev)413 static int bcm54140_probe_once(struct phy_device *phydev)
414 {
415 struct device *hwmon;
416 int ret;
417
418 /* enable hardware monitoring */
419 ret = bcm54140_enable_monitoring(phydev);
420 if (ret)
421 return ret;
422
423 hwmon = devm_hwmon_device_register_with_info(&phydev->mdio.dev,
424 "BCM54140", phydev,
425 &bcm54140_chip_info,
426 NULL);
427 return PTR_ERR_OR_ZERO(hwmon);
428 }
429 #endif
430
bcm54140_base_read_rdb(struct phy_device * phydev,u16 rdb)431 static int bcm54140_base_read_rdb(struct phy_device *phydev, u16 rdb)
432 {
433 int ret;
434
435 phy_lock_mdio_bus(phydev);
436 ret = __phy_package_write(phydev, BCM54140_BASE_ADDR,
437 MII_BCM54XX_RDB_ADDR, rdb);
438 if (ret < 0)
439 goto out;
440
441 ret = __phy_package_read(phydev, BCM54140_BASE_ADDR,
442 MII_BCM54XX_RDB_DATA);
443
444 out:
445 phy_unlock_mdio_bus(phydev);
446 return ret;
447 }
448
bcm54140_base_write_rdb(struct phy_device * phydev,u16 rdb,u16 val)449 static int bcm54140_base_write_rdb(struct phy_device *phydev,
450 u16 rdb, u16 val)
451 {
452 int ret;
453
454 phy_lock_mdio_bus(phydev);
455 ret = __phy_package_write(phydev, BCM54140_BASE_ADDR,
456 MII_BCM54XX_RDB_ADDR, rdb);
457 if (ret < 0)
458 goto out;
459
460 ret = __phy_package_write(phydev, BCM54140_BASE_ADDR,
461 MII_BCM54XX_RDB_DATA, val);
462
463 out:
464 phy_unlock_mdio_bus(phydev);
465 return ret;
466 }
467
468 /* Under some circumstances a core PLL may not lock, this will then prevent
469 * a successful link establishment. Restart the PLL after the voltages are
470 * stable to workaround this issue.
471 */
bcm54140_b0_workaround(struct phy_device * phydev)472 static int bcm54140_b0_workaround(struct phy_device *phydev)
473 {
474 int spare3;
475 int ret;
476
477 spare3 = bcm_phy_read_rdb(phydev, BCM54140_RDB_SPARE3);
478 if (spare3 < 0)
479 return spare3;
480
481 spare3 &= ~BCM54140_RDB_SPARE3_BIT0;
482
483 ret = bcm_phy_write_rdb(phydev, BCM54140_RDB_SPARE3, spare3);
484 if (ret)
485 return ret;
486
487 ret = phy_modify(phydev, MII_BMCR, 0, BMCR_PDOWN);
488 if (ret)
489 return ret;
490
491 ret = phy_modify(phydev, MII_BMCR, BMCR_PDOWN, 0);
492 if (ret)
493 return ret;
494
495 spare3 |= BCM54140_RDB_SPARE3_BIT0;
496
497 return bcm_phy_write_rdb(phydev, BCM54140_RDB_SPARE3, spare3);
498 }
499
500 /* The BCM54140 is a quad PHY where only the first port has access to the
501 * global register. Thus we need to find out its PHY address.
502 *
503 */
bcm54140_get_base_addr_and_port(struct phy_device * phydev)504 static int bcm54140_get_base_addr_and_port(struct phy_device *phydev)
505 {
506 struct bcm54140_priv *priv = phydev->priv;
507 struct mii_bus *bus = phydev->mdio.bus;
508 int addr, min_addr, max_addr;
509 int step = 1;
510 u32 phy_id;
511 int tmp;
512
513 min_addr = phydev->mdio.addr;
514 max_addr = phydev->mdio.addr;
515 addr = phydev->mdio.addr;
516
517 /* We scan forward and backwards and look for PHYs which have the
518 * same phy_id like we do. Step 1 will scan forward, step 2
519 * backwards. Once we are finished, we have a min_addr and
520 * max_addr which resembles the range of PHY addresses of the same
521 * type of PHY. There is one caveat; there may be many PHYs of
522 * the same type, but we know that each PHY takes exactly 4
523 * consecutive addresses. Therefore we can deduce our offset
524 * to the base address of this quad PHY.
525 */
526
527 while (1) {
528 if (step == 3) {
529 break;
530 } else if (step == 1) {
531 max_addr = addr;
532 addr++;
533 } else {
534 min_addr = addr;
535 addr--;
536 }
537
538 if (addr < 0 || addr >= PHY_MAX_ADDR) {
539 addr = phydev->mdio.addr;
540 step++;
541 continue;
542 }
543
544 /* read the PHY id */
545 tmp = mdiobus_read(bus, addr, MII_PHYSID1);
546 if (tmp < 0)
547 return tmp;
548 phy_id = tmp << 16;
549 tmp = mdiobus_read(bus, addr, MII_PHYSID2);
550 if (tmp < 0)
551 return tmp;
552 phy_id |= tmp;
553
554 /* see if it is still the same PHY */
555 if ((phy_id & phydev->drv->phy_id_mask) !=
556 (phydev->drv->phy_id & phydev->drv->phy_id_mask)) {
557 addr = phydev->mdio.addr;
558 step++;
559 }
560 }
561
562 /* The range we get should be a multiple of four. Please note that both
563 * the min_addr and max_addr are inclusive. So we have to add one if we
564 * subtract them.
565 */
566 if ((max_addr - min_addr + 1) % 4) {
567 dev_err(&phydev->mdio.dev,
568 "Detected Quad PHY IDs %d..%d doesn't make sense.\n",
569 min_addr, max_addr);
570 return -EINVAL;
571 }
572
573 priv->port = (phydev->mdio.addr - min_addr) % 4;
574 priv->base_addr = phydev->mdio.addr - priv->port;
575
576 return 0;
577 }
578
bcm54140_probe(struct phy_device * phydev)579 static int bcm54140_probe(struct phy_device *phydev)
580 {
581 struct bcm54140_priv *priv;
582 int ret;
583
584 priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL);
585 if (!priv)
586 return -ENOMEM;
587
588 phydev->priv = priv;
589
590 ret = bcm54140_get_base_addr_and_port(phydev);
591 if (ret)
592 return ret;
593
594 devm_phy_package_join(&phydev->mdio.dev, phydev, priv->base_addr, 0);
595
596 #if IS_ENABLED(CONFIG_HWMON)
597 mutex_init(&priv->alarm_lock);
598
599 if (phy_package_init_once(phydev)) {
600 ret = bcm54140_probe_once(phydev);
601 if (ret)
602 return ret;
603 }
604 #endif
605
606 phydev_dbg(phydev, "probed (port %d, base PHY address %d)\n",
607 priv->port, priv->base_addr);
608
609 return 0;
610 }
611
bcm54140_config_init(struct phy_device * phydev)612 static int bcm54140_config_init(struct phy_device *phydev)
613 {
614 u16 reg = 0xffff;
615 int ret;
616
617 /* Apply hardware errata */
618 if (BCM54140_PHY_ID_REV(phydev->phy_id) == BCM54140_REV_B0) {
619 ret = bcm54140_b0_workaround(phydev);
620 if (ret)
621 return ret;
622 }
623
624 /* Unmask events we are interested in. */
625 reg &= ~(BCM54140_RDB_INT_DUPLEX |
626 BCM54140_RDB_INT_SPEED |
627 BCM54140_RDB_INT_LINK);
628 ret = bcm_phy_write_rdb(phydev, BCM54140_RDB_IMR, reg);
629 if (ret)
630 return ret;
631
632 /* LED1=LINKSPD[1], LED2=LINKSPD[2], LED3=LINK/ACTIVITY */
633 ret = bcm_phy_modify_rdb(phydev, BCM54140_RDB_SPARE1,
634 0, BCM54140_RDB_SPARE1_LSLM);
635 if (ret)
636 return ret;
637
638 ret = bcm_phy_modify_rdb(phydev, BCM54140_RDB_LED_CTRL,
639 0, BCM54140_RDB_LED_CTRL_ACTLINK0);
640 if (ret)
641 return ret;
642
643 /* disable super isolate mode */
644 return bcm_phy_modify_rdb(phydev, BCM54140_RDB_C_PWR,
645 BCM54140_RDB_C_PWR_ISOLATE, 0);
646 }
647
bcm54140_handle_interrupt(struct phy_device * phydev)648 static irqreturn_t bcm54140_handle_interrupt(struct phy_device *phydev)
649 {
650 int irq_status, irq_mask;
651
652 irq_status = bcm_phy_read_rdb(phydev, BCM54140_RDB_ISR);
653 if (irq_status < 0) {
654 phy_error(phydev);
655 return IRQ_NONE;
656 }
657
658 irq_mask = bcm_phy_read_rdb(phydev, BCM54140_RDB_IMR);
659 if (irq_mask < 0) {
660 phy_error(phydev);
661 return IRQ_NONE;
662 }
663 irq_mask = ~irq_mask;
664
665 if (!(irq_status & irq_mask))
666 return IRQ_NONE;
667
668 phy_trigger_machine(phydev);
669
670 return IRQ_HANDLED;
671 }
672
bcm54140_ack_intr(struct phy_device * phydev)673 static int bcm54140_ack_intr(struct phy_device *phydev)
674 {
675 int reg;
676
677 /* clear pending interrupts */
678 reg = bcm_phy_read_rdb(phydev, BCM54140_RDB_ISR);
679 if (reg < 0)
680 return reg;
681
682 return 0;
683 }
684
bcm54140_config_intr(struct phy_device * phydev)685 static int bcm54140_config_intr(struct phy_device *phydev)
686 {
687 struct bcm54140_priv *priv = phydev->priv;
688 static const u16 port_to_imr_bit[] = {
689 BCM54140_RDB_TOP_IMR_PORT0, BCM54140_RDB_TOP_IMR_PORT1,
690 BCM54140_RDB_TOP_IMR_PORT2, BCM54140_RDB_TOP_IMR_PORT3,
691 };
692 int reg, err;
693
694 if (priv->port >= ARRAY_SIZE(port_to_imr_bit))
695 return -EINVAL;
696
697 reg = bcm54140_base_read_rdb(phydev, BCM54140_RDB_TOP_IMR);
698 if (reg < 0)
699 return reg;
700
701 if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
702 err = bcm54140_ack_intr(phydev);
703 if (err)
704 return err;
705
706 reg &= ~port_to_imr_bit[priv->port];
707 err = bcm54140_base_write_rdb(phydev, BCM54140_RDB_TOP_IMR, reg);
708 } else {
709 reg |= port_to_imr_bit[priv->port];
710 err = bcm54140_base_write_rdb(phydev, BCM54140_RDB_TOP_IMR, reg);
711 if (err)
712 return err;
713
714 err = bcm54140_ack_intr(phydev);
715 }
716
717 return err;
718 }
719
bcm54140_get_downshift(struct phy_device * phydev,u8 * data)720 static int bcm54140_get_downshift(struct phy_device *phydev, u8 *data)
721 {
722 int val;
723
724 val = bcm_phy_read_rdb(phydev, BCM54140_RDB_C_MISC_CTRL);
725 if (val < 0)
726 return val;
727
728 if (!(val & BCM54140_RDB_C_MISC_CTRL_WS_EN)) {
729 *data = DOWNSHIFT_DEV_DISABLE;
730 return 0;
731 }
732
733 val = bcm_phy_read_rdb(phydev, BCM54140_RDB_SPARE2);
734 if (val < 0)
735 return val;
736
737 if (val & BCM54140_RDB_SPARE2_WS_RTRY_DIS)
738 *data = 1;
739 else
740 *data = FIELD_GET(BCM54140_RDB_SPARE2_WS_RTRY_LIMIT, val) + 2;
741
742 return 0;
743 }
744
bcm54140_set_downshift(struct phy_device * phydev,u8 cnt)745 static int bcm54140_set_downshift(struct phy_device *phydev, u8 cnt)
746 {
747 u16 mask, set;
748 int ret;
749
750 if (cnt > BCM54140_MAX_DOWNSHIFT && cnt != DOWNSHIFT_DEV_DEFAULT_COUNT)
751 return -EINVAL;
752
753 if (!cnt)
754 return bcm_phy_modify_rdb(phydev, BCM54140_RDB_C_MISC_CTRL,
755 BCM54140_RDB_C_MISC_CTRL_WS_EN, 0);
756
757 if (cnt == DOWNSHIFT_DEV_DEFAULT_COUNT)
758 cnt = BCM54140_DEFAULT_DOWNSHIFT;
759
760 if (cnt == 1) {
761 mask = 0;
762 set = BCM54140_RDB_SPARE2_WS_RTRY_DIS;
763 } else {
764 mask = BCM54140_RDB_SPARE2_WS_RTRY_DIS;
765 mask |= BCM54140_RDB_SPARE2_WS_RTRY_LIMIT;
766 set = FIELD_PREP(BCM54140_RDB_SPARE2_WS_RTRY_LIMIT, cnt - 2);
767 }
768 ret = bcm_phy_modify_rdb(phydev, BCM54140_RDB_SPARE2,
769 mask, set);
770 if (ret)
771 return ret;
772
773 return bcm_phy_modify_rdb(phydev, BCM54140_RDB_C_MISC_CTRL,
774 0, BCM54140_RDB_C_MISC_CTRL_WS_EN);
775 }
776
bcm54140_get_edpd(struct phy_device * phydev,u16 * tx_interval)777 static int bcm54140_get_edpd(struct phy_device *phydev, u16 *tx_interval)
778 {
779 int val;
780
781 val = bcm_phy_read_rdb(phydev, BCM54140_RDB_C_APWR);
782 if (val < 0)
783 return val;
784
785 switch (FIELD_GET(BCM54140_RDB_C_APWR_APD_MODE_MASK, val)) {
786 case BCM54140_RDB_C_APWR_APD_MODE_DIS:
787 case BCM54140_RDB_C_APWR_APD_MODE_DIS2:
788 *tx_interval = ETHTOOL_PHY_EDPD_DISABLE;
789 break;
790 case BCM54140_RDB_C_APWR_APD_MODE_EN:
791 case BCM54140_RDB_C_APWR_APD_MODE_EN_ANEG:
792 switch (FIELD_GET(BCM54140_RDB_C_APWR_SLP_TIM_MASK, val)) {
793 case BCM54140_RDB_C_APWR_SLP_TIM_2_7:
794 *tx_interval = 2700;
795 break;
796 case BCM54140_RDB_C_APWR_SLP_TIM_5_4:
797 *tx_interval = 5400;
798 break;
799 }
800 }
801
802 return 0;
803 }
804
bcm54140_set_edpd(struct phy_device * phydev,u16 tx_interval)805 static int bcm54140_set_edpd(struct phy_device *phydev, u16 tx_interval)
806 {
807 u16 mask, set;
808
809 mask = BCM54140_RDB_C_APWR_APD_MODE_MASK;
810 if (tx_interval == ETHTOOL_PHY_EDPD_DISABLE)
811 set = FIELD_PREP(BCM54140_RDB_C_APWR_APD_MODE_MASK,
812 BCM54140_RDB_C_APWR_APD_MODE_DIS);
813 else
814 set = FIELD_PREP(BCM54140_RDB_C_APWR_APD_MODE_MASK,
815 BCM54140_RDB_C_APWR_APD_MODE_EN_ANEG);
816
817 /* enable single pulse mode */
818 set |= BCM54140_RDB_C_APWR_SINGLE_PULSE;
819
820 /* set sleep timer */
821 mask |= BCM54140_RDB_C_APWR_SLP_TIM_MASK;
822 switch (tx_interval) {
823 case ETHTOOL_PHY_EDPD_DFLT_TX_MSECS:
824 case ETHTOOL_PHY_EDPD_DISABLE:
825 case 2700:
826 set |= BCM54140_RDB_C_APWR_SLP_TIM_2_7;
827 break;
828 case 5400:
829 set |= BCM54140_RDB_C_APWR_SLP_TIM_5_4;
830 break;
831 default:
832 return -EINVAL;
833 }
834
835 return bcm_phy_modify_rdb(phydev, BCM54140_RDB_C_APWR, mask, set);
836 }
837
bcm54140_get_tunable(struct phy_device * phydev,struct ethtool_tunable * tuna,void * data)838 static int bcm54140_get_tunable(struct phy_device *phydev,
839 struct ethtool_tunable *tuna, void *data)
840 {
841 switch (tuna->id) {
842 case ETHTOOL_PHY_DOWNSHIFT:
843 return bcm54140_get_downshift(phydev, data);
844 case ETHTOOL_PHY_EDPD:
845 return bcm54140_get_edpd(phydev, data);
846 default:
847 return -EOPNOTSUPP;
848 }
849 }
850
bcm54140_set_tunable(struct phy_device * phydev,struct ethtool_tunable * tuna,const void * data)851 static int bcm54140_set_tunable(struct phy_device *phydev,
852 struct ethtool_tunable *tuna, const void *data)
853 {
854 switch (tuna->id) {
855 case ETHTOOL_PHY_DOWNSHIFT:
856 return bcm54140_set_downshift(phydev, *(const u8 *)data);
857 case ETHTOOL_PHY_EDPD:
858 return bcm54140_set_edpd(phydev, *(const u16 *)data);
859 default:
860 return -EOPNOTSUPP;
861 }
862 }
863
864 static struct phy_driver bcm54140_drivers[] = {
865 {
866 .phy_id = PHY_ID_BCM54140,
867 .phy_id_mask = BCM54140_PHY_ID_MASK,
868 .name = "Broadcom BCM54140",
869 .flags = PHY_POLL_CABLE_TEST,
870 .features = PHY_GBIT_FEATURES,
871 .config_init = bcm54140_config_init,
872 .handle_interrupt = bcm54140_handle_interrupt,
873 .config_intr = bcm54140_config_intr,
874 .probe = bcm54140_probe,
875 .suspend = genphy_suspend,
876 .resume = genphy_resume,
877 .soft_reset = genphy_soft_reset,
878 .get_tunable = bcm54140_get_tunable,
879 .set_tunable = bcm54140_set_tunable,
880 .cable_test_start = bcm_phy_cable_test_start_rdb,
881 .cable_test_get_status = bcm_phy_cable_test_get_status_rdb,
882 },
883 };
884 module_phy_driver(bcm54140_drivers);
885
886 static struct mdio_device_id __maybe_unused bcm54140_tbl[] = {
887 { PHY_ID_BCM54140, BCM54140_PHY_ID_MASK },
888 { }
889 };
890
891 MODULE_AUTHOR("Michael Walle");
892 MODULE_DESCRIPTION("Broadcom BCM54140 PHY driver");
893 MODULE_DEVICE_TABLE(mdio, bcm54140_tbl);
894 MODULE_LICENSE("GPL");
895