xref: /linux/drivers/media/i2c/ks0127.c (revision 3a39d672e7f48b8d6b91a09afa4b55352773b4b5)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Video Capture Driver (Video for Linux 1/2)
4  * for the Matrox Marvel G200,G400 and Rainbow Runner-G series
5  *
6  * This module is an interface to the KS0127 video decoder chip.
7  *
8  * Copyright (C) 1999  Ryan Drake <stiletto@mediaone.net>
9  *
10  *****************************************************************************
11  *
12  * Modified and extended by
13  *	Mike Bernson <mike@mlb.org>
14  *	Gerard v.d. Horst
15  *	Leon van Stuivenberg <l.vanstuivenberg@chello.nl>
16  *	Gernot Ziegler <gz@lysator.liu.se>
17  *
18  * Version History:
19  * V1.0 Ryan Drake	   Initial version by Ryan Drake
20  * V1.1 Gerard v.d. Horst  Added some debugoutput, reset the video-standard
21  */
22 
23 #include <linux/init.h>
24 #include <linux/module.h>
25 #include <linux/delay.h>
26 #include <linux/errno.h>
27 #include <linux/kernel.h>
28 #include <linux/i2c.h>
29 #include <linux/videodev2.h>
30 #include <linux/slab.h>
31 #include <media/v4l2-device.h>
32 #include "ks0127.h"
33 
34 MODULE_DESCRIPTION("KS0127 video decoder driver");
35 MODULE_AUTHOR("Ryan Drake");
36 MODULE_LICENSE("GPL");
37 
38 /* Addresses */
39 #define I2C_KS0127_ADDON   0xD8
40 #define I2C_KS0127_ONBOARD 0xDA
41 
42 
43 /* ks0127 control registers */
44 #define KS_STAT     0x00
45 #define KS_CMDA     0x01
46 #define KS_CMDB     0x02
47 #define KS_CMDC     0x03
48 #define KS_CMDD     0x04
49 #define KS_HAVB     0x05
50 #define KS_HAVE     0x06
51 #define KS_HS1B     0x07
52 #define KS_HS1E     0x08
53 #define KS_HS2B     0x09
54 #define KS_HS2E     0x0a
55 #define KS_AGC      0x0b
56 #define KS_HXTRA    0x0c
57 #define KS_CDEM     0x0d
58 #define KS_PORTAB   0x0e
59 #define KS_LUMA     0x0f
60 #define KS_CON      0x10
61 #define KS_BRT      0x11
62 #define KS_CHROMA   0x12
63 #define KS_CHROMB   0x13
64 #define KS_DEMOD    0x14
65 #define KS_SAT      0x15
66 #define KS_HUE      0x16
67 #define KS_VERTIA   0x17
68 #define KS_VERTIB   0x18
69 #define KS_VERTIC   0x19
70 #define KS_HSCLL    0x1a
71 #define KS_HSCLH    0x1b
72 #define KS_VSCLL    0x1c
73 #define KS_VSCLH    0x1d
74 #define KS_OFMTA    0x1e
75 #define KS_OFMTB    0x1f
76 #define KS_VBICTL   0x20
77 #define KS_CCDAT2   0x21
78 #define KS_CCDAT1   0x22
79 #define KS_VBIL30   0x23
80 #define KS_VBIL74   0x24
81 #define KS_VBIL118  0x25
82 #define KS_VBIL1512 0x26
83 #define KS_TTFRAM   0x27
84 #define KS_TESTA    0x28
85 #define KS_UVOFFH   0x29
86 #define KS_UVOFFL   0x2a
87 #define KS_UGAIN    0x2b
88 #define KS_VGAIN    0x2c
89 #define KS_VAVB     0x2d
90 #define KS_VAVE     0x2e
91 #define KS_CTRACK   0x2f
92 #define KS_POLCTL   0x30
93 #define KS_REFCOD   0x31
94 #define KS_INVALY   0x32
95 #define KS_INVALU   0x33
96 #define KS_INVALV   0x34
97 #define KS_UNUSEY   0x35
98 #define KS_UNUSEU   0x36
99 #define KS_UNUSEV   0x37
100 #define KS_USRSAV   0x38
101 #define KS_USREAV   0x39
102 #define KS_SHS1A    0x3a
103 #define KS_SHS1B    0x3b
104 #define KS_SHS1C    0x3c
105 #define KS_CMDE     0x3d
106 #define KS_VSDEL    0x3e
107 #define KS_CMDF     0x3f
108 #define KS_GAMMA0   0x40
109 #define KS_GAMMA1   0x41
110 #define KS_GAMMA2   0x42
111 #define KS_GAMMA3   0x43
112 #define KS_GAMMA4   0x44
113 #define KS_GAMMA5   0x45
114 #define KS_GAMMA6   0x46
115 #define KS_GAMMA7   0x47
116 #define KS_GAMMA8   0x48
117 #define KS_GAMMA9   0x49
118 #define KS_GAMMA10  0x4a
119 #define KS_GAMMA11  0x4b
120 #define KS_GAMMA12  0x4c
121 #define KS_GAMMA13  0x4d
122 #define KS_GAMMA14  0x4e
123 #define KS_GAMMA15  0x4f
124 #define KS_GAMMA16  0x50
125 #define KS_GAMMA17  0x51
126 #define KS_GAMMA18  0x52
127 #define KS_GAMMA19  0x53
128 #define KS_GAMMA20  0x54
129 #define KS_GAMMA21  0x55
130 #define KS_GAMMA22  0x56
131 #define KS_GAMMA23  0x57
132 #define KS_GAMMA24  0x58
133 #define KS_GAMMA25  0x59
134 #define KS_GAMMA26  0x5a
135 #define KS_GAMMA27  0x5b
136 #define KS_GAMMA28  0x5c
137 #define KS_GAMMA29  0x5d
138 #define KS_GAMMA30  0x5e
139 #define KS_GAMMA31  0x5f
140 #define KS_GAMMAD0  0x60
141 #define KS_GAMMAD1  0x61
142 #define KS_GAMMAD2  0x62
143 #define KS_GAMMAD3  0x63
144 #define KS_GAMMAD4  0x64
145 #define KS_GAMMAD5  0x65
146 #define KS_GAMMAD6  0x66
147 #define KS_GAMMAD7  0x67
148 #define KS_GAMMAD8  0x68
149 #define KS_GAMMAD9  0x69
150 #define KS_GAMMAD10 0x6a
151 #define KS_GAMMAD11 0x6b
152 #define KS_GAMMAD12 0x6c
153 #define KS_GAMMAD13 0x6d
154 #define KS_GAMMAD14 0x6e
155 #define KS_GAMMAD15 0x6f
156 #define KS_GAMMAD16 0x70
157 #define KS_GAMMAD17 0x71
158 #define KS_GAMMAD18 0x72
159 #define KS_GAMMAD19 0x73
160 #define KS_GAMMAD20 0x74
161 #define KS_GAMMAD21 0x75
162 #define KS_GAMMAD22 0x76
163 #define KS_GAMMAD23 0x77
164 #define KS_GAMMAD24 0x78
165 #define KS_GAMMAD25 0x79
166 #define KS_GAMMAD26 0x7a
167 #define KS_GAMMAD27 0x7b
168 #define KS_GAMMAD28 0x7c
169 #define KS_GAMMAD29 0x7d
170 #define KS_GAMMAD30 0x7e
171 #define KS_GAMMAD31 0x7f
172 
173 
174 /****************************************************************************
175 * mga_dev : represents one ks0127 chip.
176 ****************************************************************************/
177 
178 struct ks0127 {
179 	struct v4l2_subdev sd;
180 	v4l2_std_id	norm;
181 	u8		regs[256];
182 };
183 
to_ks0127(struct v4l2_subdev * sd)184 static inline struct ks0127 *to_ks0127(struct v4l2_subdev *sd)
185 {
186 	return container_of(sd, struct ks0127, sd);
187 }
188 
189 
190 static int debug; /* insmod parameter */
191 
192 module_param(debug, int, 0);
193 MODULE_PARM_DESC(debug, "Debug output");
194 
195 static u8 reg_defaults[64];
196 
init_reg_defaults(void)197 static void init_reg_defaults(void)
198 {
199 	static int initialized;
200 	u8 *table = reg_defaults;
201 
202 	if (initialized)
203 		return;
204 	initialized = 1;
205 
206 	table[KS_CMDA]     = 0x2c;  /* VSE=0, CCIR 601, autodetect standard */
207 	table[KS_CMDB]     = 0x12;  /* VALIGN=0, AGC control and input */
208 	table[KS_CMDC]     = 0x00;  /* Test options */
209 	/* clock & input select, write 1 to PORTA */
210 	table[KS_CMDD]     = 0x01;
211 	table[KS_HAVB]     = 0x00;  /* HAV Start Control */
212 	table[KS_HAVE]     = 0x00;  /* HAV End Control */
213 	table[KS_HS1B]     = 0x10;  /* HS1 Start Control */
214 	table[KS_HS1E]     = 0x00;  /* HS1 End Control */
215 	table[KS_HS2B]     = 0x00;  /* HS2 Start Control */
216 	table[KS_HS2E]     = 0x00;  /* HS2 End Control */
217 	table[KS_AGC]      = 0x53;  /* Manual setting for AGC */
218 	table[KS_HXTRA]    = 0x00;  /* Extra Bits for HAV and HS1/2 */
219 	table[KS_CDEM]     = 0x00;  /* Chroma Demodulation Control */
220 	table[KS_PORTAB]   = 0x0f;  /* port B is input, port A output GPPORT */
221 	table[KS_LUMA]     = 0x01;  /* Luma control */
222 	table[KS_CON]      = 0x00;  /* Contrast Control */
223 	table[KS_BRT]      = 0x00;  /* Brightness Control */
224 	table[KS_CHROMA]   = 0x2a;  /* Chroma control A */
225 	table[KS_CHROMB]   = 0x90;  /* Chroma control B */
226 	table[KS_DEMOD]    = 0x00;  /* Chroma Demodulation Control & Status */
227 	table[KS_SAT]      = 0x00;  /* Color Saturation Control*/
228 	table[KS_HUE]      = 0x00;  /* Hue Control */
229 	table[KS_VERTIA]   = 0x00;  /* Vertical Processing Control A */
230 	/* Vertical Processing Control B, luma 1 line delayed */
231 	table[KS_VERTIB]   = 0x12;
232 	table[KS_VERTIC]   = 0x0b;  /* Vertical Processing Control C */
233 	table[KS_HSCLL]    = 0x00;  /* Horizontal Scaling Ratio Low */
234 	table[KS_HSCLH]    = 0x00;  /* Horizontal Scaling Ratio High */
235 	table[KS_VSCLL]    = 0x00;  /* Vertical Scaling Ratio Low */
236 	table[KS_VSCLH]    = 0x00;  /* Vertical Scaling Ratio High */
237 	/* 16 bit YCbCr 4:2:2 output; I can't make the bt866 like 8 bit /Sam */
238 	table[KS_OFMTA]    = 0x30;
239 	table[KS_OFMTB]    = 0x00;  /* Output Control B */
240 	/* VBI Decoder Control; 4bit fmt: avoid Y overflow */
241 	table[KS_VBICTL]   = 0x5d;
242 	table[KS_CCDAT2]   = 0x00;  /* Read Only register */
243 	table[KS_CCDAT1]   = 0x00;  /* Read Only register */
244 	table[KS_VBIL30]   = 0xa8;  /* VBI data decoding options */
245 	table[KS_VBIL74]   = 0xaa;  /* VBI data decoding options */
246 	table[KS_VBIL118]  = 0x2a;  /* VBI data decoding options */
247 	table[KS_VBIL1512] = 0x00;  /* VBI data decoding options */
248 	table[KS_TTFRAM]   = 0x00;  /* Teletext frame alignment pattern */
249 	table[KS_TESTA]    = 0x00;  /* test register, shouldn't be written */
250 	table[KS_UVOFFH]   = 0x00;  /* UV Offset Adjustment High */
251 	table[KS_UVOFFL]   = 0x00;  /* UV Offset Adjustment Low */
252 	table[KS_UGAIN]    = 0x00;  /* U Component Gain Adjustment */
253 	table[KS_VGAIN]    = 0x00;  /* V Component Gain Adjustment */
254 	table[KS_VAVB]     = 0x07;  /* VAV Begin */
255 	table[KS_VAVE]     = 0x00;  /* VAV End */
256 	table[KS_CTRACK]   = 0x00;  /* Chroma Tracking Control */
257 	table[KS_POLCTL]   = 0x41;  /* Timing Signal Polarity Control */
258 	table[KS_REFCOD]   = 0x80;  /* Reference Code Insertion Control */
259 	table[KS_INVALY]   = 0x10;  /* Invalid Y Code */
260 	table[KS_INVALU]   = 0x80;  /* Invalid U Code */
261 	table[KS_INVALV]   = 0x80;  /* Invalid V Code */
262 	table[KS_UNUSEY]   = 0x10;  /* Unused Y Code */
263 	table[KS_UNUSEU]   = 0x80;  /* Unused U Code */
264 	table[KS_UNUSEV]   = 0x80;  /* Unused V Code */
265 	table[KS_USRSAV]   = 0x00;  /* reserved */
266 	table[KS_USREAV]   = 0x00;  /* reserved */
267 	table[KS_SHS1A]    = 0x00;  /* User Defined SHS1 A */
268 	/* User Defined SHS1 B, ALT656=1 on 0127B */
269 	table[KS_SHS1B]    = 0x80;
270 	table[KS_SHS1C]    = 0x00;  /* User Defined SHS1 C */
271 	table[KS_CMDE]     = 0x00;  /* Command Register E */
272 	table[KS_VSDEL]    = 0x00;  /* VS Delay Control */
273 	/* Command Register F, update -immediately- */
274 	/* (there might come no vsync)*/
275 	table[KS_CMDF]     = 0x02;
276 }
277 
278 
279 /* We need to manually read because of a bug in the KS0127 chip.
280  *
281  * An explanation from kayork@mail.utexas.edu:
282  *
283  * During I2C reads, the KS0127 only samples for a stop condition
284  * during the place where the acknowledge bit should be. Any standard
285  * I2C implementation (correctly) throws in another clock transition
286  * at the 9th bit, and the KS0127 will not recognize the stop condition
287  * and will continue to clock out data.
288  *
289  * So we have to do the read ourself.  Big deal.
290  *	   workaround in i2c-algo-bit
291  */
292 
293 
ks0127_read(struct v4l2_subdev * sd,u8 reg)294 static u8 ks0127_read(struct v4l2_subdev *sd, u8 reg)
295 {
296 	struct i2c_client *client = v4l2_get_subdevdata(sd);
297 	char val = 0;
298 	struct i2c_msg msgs[] = {
299 		{
300 			.addr = client->addr,
301 			.len = sizeof(reg),
302 			.buf = &reg
303 		},
304 		{
305 			.addr = client->addr,
306 			.flags = I2C_M_RD | I2C_M_NO_RD_ACK,
307 			.len = sizeof(val),
308 			.buf = &val
309 		}
310 	};
311 	int ret;
312 
313 	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
314 	if (ret != ARRAY_SIZE(msgs))
315 		v4l2_dbg(1, debug, sd, "read error\n");
316 
317 	return val;
318 }
319 
320 
ks0127_write(struct v4l2_subdev * sd,u8 reg,u8 val)321 static void ks0127_write(struct v4l2_subdev *sd, u8 reg, u8 val)
322 {
323 	struct i2c_client *client = v4l2_get_subdevdata(sd);
324 	struct ks0127 *ks = to_ks0127(sd);
325 	char msg[] = { reg, val };
326 
327 	if (i2c_master_send(client, msg, sizeof(msg)) != sizeof(msg))
328 		v4l2_dbg(1, debug, sd, "write error\n");
329 
330 	ks->regs[reg] = val;
331 }
332 
333 
334 /* generic bit-twiddling */
ks0127_and_or(struct v4l2_subdev * sd,u8 reg,u8 and_v,u8 or_v)335 static void ks0127_and_or(struct v4l2_subdev *sd, u8 reg, u8 and_v, u8 or_v)
336 {
337 	struct ks0127 *ks = to_ks0127(sd);
338 
339 	u8 val = ks->regs[reg];
340 	val = (val & and_v) | or_v;
341 	ks0127_write(sd, reg, val);
342 }
343 
344 
345 
346 /****************************************************************************
347 * ks0127 private api
348 ****************************************************************************/
ks0127_init(struct v4l2_subdev * sd)349 static void ks0127_init(struct v4l2_subdev *sd)
350 {
351 	u8 *table = reg_defaults;
352 	int i;
353 
354 	v4l2_dbg(1, debug, sd, "reset\n");
355 	msleep(1);
356 
357 	/* initialize all registers to known values */
358 	/* (except STAT, 0x21, 0x22, TEST and 0x38,0x39) */
359 
360 	for (i = 1; i < 33; i++)
361 		ks0127_write(sd, i, table[i]);
362 
363 	for (i = 35; i < 40; i++)
364 		ks0127_write(sd, i, table[i]);
365 
366 	for (i = 41; i < 56; i++)
367 		ks0127_write(sd, i, table[i]);
368 
369 	for (i = 58; i < 64; i++)
370 		ks0127_write(sd, i, table[i]);
371 
372 
373 	if ((ks0127_read(sd, KS_STAT) & 0x80) == 0) {
374 		v4l2_dbg(1, debug, sd, "ks0122s found\n");
375 		return;
376 	}
377 
378 	switch (ks0127_read(sd, KS_CMDE) & 0x0f) {
379 	case 0:
380 		v4l2_dbg(1, debug, sd, "ks0127 found\n");
381 		break;
382 
383 	case 9:
384 		v4l2_dbg(1, debug, sd, "ks0127B Revision A found\n");
385 		break;
386 
387 	default:
388 		v4l2_dbg(1, debug, sd, "unknown revision\n");
389 		break;
390 	}
391 }
392 
ks0127_s_routing(struct v4l2_subdev * sd,u32 input,u32 output,u32 config)393 static int ks0127_s_routing(struct v4l2_subdev *sd,
394 			    u32 input, u32 output, u32 config)
395 {
396 	struct ks0127 *ks = to_ks0127(sd);
397 
398 	switch (input) {
399 	case KS_INPUT_COMPOSITE_1:
400 	case KS_INPUT_COMPOSITE_2:
401 	case KS_INPUT_COMPOSITE_3:
402 	case KS_INPUT_COMPOSITE_4:
403 	case KS_INPUT_COMPOSITE_5:
404 	case KS_INPUT_COMPOSITE_6:
405 		v4l2_dbg(1, debug, sd,
406 			"s_routing %d: Composite\n", input);
407 		/* autodetect 50/60 Hz */
408 		ks0127_and_or(sd, KS_CMDA,   0xfc, 0x00);
409 		/* VSE=0 */
410 		ks0127_and_or(sd, KS_CMDA,   ~0x40, 0x00);
411 		/* set input line */
412 		ks0127_and_or(sd, KS_CMDB,   0xb0, input);
413 		/* non-freerunning mode */
414 		ks0127_and_or(sd, KS_CMDC,   0x70, 0x0a);
415 		/* analog input */
416 		ks0127_and_or(sd, KS_CMDD,   0x03, 0x00);
417 		/* enable chroma demodulation */
418 		ks0127_and_or(sd, KS_CTRACK, 0xcf, 0x00);
419 		/* chroma trap, HYBWR=1 */
420 		ks0127_and_or(sd, KS_LUMA,   0x00,
421 			       (reg_defaults[KS_LUMA])|0x0c);
422 		/* scaler fullbw, luma comb off */
423 		ks0127_and_or(sd, KS_VERTIA, 0x08, 0x81);
424 		/* manual chroma comb .25 .5 .25 */
425 		ks0127_and_or(sd, KS_VERTIC, 0x0f, 0x90);
426 
427 		/* chroma path delay */
428 		ks0127_and_or(sd, KS_CHROMB, 0x0f, 0x90);
429 
430 		ks0127_write(sd, KS_UGAIN, reg_defaults[KS_UGAIN]);
431 		ks0127_write(sd, KS_VGAIN, reg_defaults[KS_VGAIN]);
432 		ks0127_write(sd, KS_UVOFFH, reg_defaults[KS_UVOFFH]);
433 		ks0127_write(sd, KS_UVOFFL, reg_defaults[KS_UVOFFL]);
434 		break;
435 
436 	case KS_INPUT_SVIDEO_1:
437 	case KS_INPUT_SVIDEO_2:
438 	case KS_INPUT_SVIDEO_3:
439 		v4l2_dbg(1, debug, sd,
440 			"s_routing %d: S-Video\n", input);
441 		/* autodetect 50/60 Hz */
442 		ks0127_and_or(sd, KS_CMDA,   0xfc, 0x00);
443 		/* VSE=0 */
444 		ks0127_and_or(sd, KS_CMDA,   ~0x40, 0x00);
445 		/* set input line */
446 		ks0127_and_or(sd, KS_CMDB,   0xb0, input);
447 		/* non-freerunning mode */
448 		ks0127_and_or(sd, KS_CMDC,   0x70, 0x0a);
449 		/* analog input */
450 		ks0127_and_or(sd, KS_CMDD,   0x03, 0x00);
451 		/* enable chroma demodulation */
452 		ks0127_and_or(sd, KS_CTRACK, 0xcf, 0x00);
453 		ks0127_and_or(sd, KS_LUMA, 0x00,
454 			       reg_defaults[KS_LUMA]);
455 		/* disable luma comb */
456 		ks0127_and_or(sd, KS_VERTIA, 0x08,
457 			       (reg_defaults[KS_VERTIA]&0xf0)|0x01);
458 		ks0127_and_or(sd, KS_VERTIC, 0x0f,
459 			       reg_defaults[KS_VERTIC]&0xf0);
460 
461 		ks0127_and_or(sd, KS_CHROMB, 0x0f,
462 			       reg_defaults[KS_CHROMB]&0xf0);
463 
464 		ks0127_write(sd, KS_UGAIN, reg_defaults[KS_UGAIN]);
465 		ks0127_write(sd, KS_VGAIN, reg_defaults[KS_VGAIN]);
466 		ks0127_write(sd, KS_UVOFFH, reg_defaults[KS_UVOFFH]);
467 		ks0127_write(sd, KS_UVOFFL, reg_defaults[KS_UVOFFL]);
468 		break;
469 
470 	case KS_INPUT_YUV656:
471 		v4l2_dbg(1, debug, sd, "s_routing 15: YUV656\n");
472 		if (ks->norm & V4L2_STD_525_60)
473 			/* force 60 Hz */
474 			ks0127_and_or(sd, KS_CMDA,   0xfc, 0x03);
475 		else
476 			/* force 50 Hz */
477 			ks0127_and_or(sd, KS_CMDA,   0xfc, 0x02);
478 
479 		ks0127_and_or(sd, KS_CMDA,   0xff, 0x40); /* VSE=1 */
480 		/* set input line and VALIGN */
481 		ks0127_and_or(sd, KS_CMDB,   0xb0, (input | 0x40));
482 		/* freerunning mode, */
483 		/* TSTGEN = 1 TSTGFR=11 TSTGPH=0 TSTGPK=0  VMEM=1*/
484 		ks0127_and_or(sd, KS_CMDC,   0x70, 0x87);
485 		/* digital input, SYNDIR = 0 INPSL=01 CLKDIR=0 EAV=0 */
486 		ks0127_and_or(sd, KS_CMDD,   0x03, 0x08);
487 		/* disable chroma demodulation */
488 		ks0127_and_or(sd, KS_CTRACK, 0xcf, 0x30);
489 		/* HYPK =01 CTRAP = 0 HYBWR=0 PED=1 RGBH=1 UNIT=1 */
490 		ks0127_and_or(sd, KS_LUMA,   0x00, 0x71);
491 		ks0127_and_or(sd, KS_VERTIC, 0x0f,
492 			       reg_defaults[KS_VERTIC]&0xf0);
493 
494 		/* scaler fullbw, luma comb off */
495 		ks0127_and_or(sd, KS_VERTIA, 0x08, 0x81);
496 
497 		ks0127_and_or(sd, KS_CHROMB, 0x0f,
498 			       reg_defaults[KS_CHROMB]&0xf0);
499 
500 		ks0127_and_or(sd, KS_CON, 0x00, 0x00);
501 		ks0127_and_or(sd, KS_BRT, 0x00, 32);	/* spec: 34 */
502 			/* spec: 229 (e5) */
503 		ks0127_and_or(sd, KS_SAT, 0x00, 0xe8);
504 		ks0127_and_or(sd, KS_HUE, 0x00, 0);
505 
506 		ks0127_and_or(sd, KS_UGAIN, 0x00, 238);
507 		ks0127_and_or(sd, KS_VGAIN, 0x00, 0x00);
508 
509 		/*UOFF:0x30, VOFF:0x30, TSTCGN=1 */
510 		ks0127_and_or(sd, KS_UVOFFH, 0x00, 0x4f);
511 		ks0127_and_or(sd, KS_UVOFFL, 0x00, 0x00);
512 		break;
513 
514 	default:
515 		v4l2_dbg(1, debug, sd,
516 			"s_routing: Unknown input %d\n", input);
517 		break;
518 	}
519 
520 	/* hack: CDMLPF sometimes spontaneously switches on; */
521 	/* force back off */
522 	ks0127_write(sd, KS_DEMOD, reg_defaults[KS_DEMOD]);
523 	return 0;
524 }
525 
ks0127_s_std(struct v4l2_subdev * sd,v4l2_std_id std)526 static int ks0127_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
527 {
528 	struct ks0127 *ks = to_ks0127(sd);
529 
530 	/* Set to automatic SECAM/Fsc mode */
531 	ks0127_and_or(sd, KS_DEMOD, 0xf0, 0x00);
532 
533 	ks->norm = std;
534 	if (std & V4L2_STD_NTSC) {
535 		v4l2_dbg(1, debug, sd,
536 			"s_std: NTSC_M\n");
537 		ks0127_and_or(sd, KS_CHROMA, 0x9f, 0x20);
538 	} else if (std & V4L2_STD_PAL_N) {
539 		v4l2_dbg(1, debug, sd,
540 			"s_std: NTSC_N (fixme)\n");
541 		ks0127_and_or(sd, KS_CHROMA, 0x9f, 0x40);
542 	} else if (std & V4L2_STD_PAL) {
543 		v4l2_dbg(1, debug, sd,
544 			"s_std: PAL_N\n");
545 		ks0127_and_or(sd, KS_CHROMA, 0x9f, 0x20);
546 	} else if (std & V4L2_STD_PAL_M) {
547 		v4l2_dbg(1, debug, sd,
548 			"s_std: PAL_M (fixme)\n");
549 		ks0127_and_or(sd, KS_CHROMA, 0x9f, 0x40);
550 	} else if (std & V4L2_STD_SECAM) {
551 		v4l2_dbg(1, debug, sd,
552 			"s_std: SECAM\n");
553 
554 		/* set to secam autodetection */
555 		ks0127_and_or(sd, KS_CHROMA, 0xdf, 0x20);
556 		ks0127_and_or(sd, KS_DEMOD, 0xf0, 0x00);
557 		schedule_timeout_interruptible(HZ/10+1);
558 
559 		/* did it autodetect? */
560 		if (!(ks0127_read(sd, KS_DEMOD) & 0x40))
561 			/* force to secam mode */
562 			ks0127_and_or(sd, KS_DEMOD, 0xf0, 0x0f);
563 	} else {
564 		v4l2_dbg(1, debug, sd, "s_std: Unknown norm %llx\n",
565 			       (unsigned long long)std);
566 	}
567 	return 0;
568 }
569 
ks0127_s_stream(struct v4l2_subdev * sd,int enable)570 static int ks0127_s_stream(struct v4l2_subdev *sd, int enable)
571 {
572 	v4l2_dbg(1, debug, sd, "s_stream(%d)\n", enable);
573 	if (enable) {
574 		/* All output pins on */
575 		ks0127_and_or(sd, KS_OFMTA, 0xcf, 0x30);
576 		/* Obey the OEN pin */
577 		ks0127_and_or(sd, KS_CDEM, 0x7f, 0x00);
578 	} else {
579 		/* Video output pins off */
580 		ks0127_and_or(sd, KS_OFMTA, 0xcf, 0x00);
581 		/* Ignore the OEN pin */
582 		ks0127_and_or(sd, KS_CDEM, 0x7f, 0x80);
583 	}
584 	return 0;
585 }
586 
ks0127_status(struct v4l2_subdev * sd,u32 * pstatus,v4l2_std_id * pstd)587 static int ks0127_status(struct v4l2_subdev *sd, u32 *pstatus, v4l2_std_id *pstd)
588 {
589 	int stat = V4L2_IN_ST_NO_SIGNAL;
590 	u8 status;
591 	v4l2_std_id std = pstd ? *pstd : V4L2_STD_ALL;
592 
593 	status = ks0127_read(sd, KS_STAT);
594 	if (!(status & 0x20))		 /* NOVID not set */
595 		stat = 0;
596 	if (!(status & 0x01)) {		      /* CLOCK set */
597 		stat |= V4L2_IN_ST_NO_COLOR;
598 		std = V4L2_STD_UNKNOWN;
599 	} else {
600 		if ((status & 0x08))		   /* PALDET set */
601 			std &= V4L2_STD_PAL;
602 		else
603 			std &= V4L2_STD_NTSC;
604 	}
605 	if ((status & 0x10))		   /* PALDET set */
606 		std &= V4L2_STD_525_60;
607 	else
608 		std &= V4L2_STD_625_50;
609 	if (pstd)
610 		*pstd = std;
611 	if (pstatus)
612 		*pstatus = stat;
613 	return 0;
614 }
615 
ks0127_querystd(struct v4l2_subdev * sd,v4l2_std_id * std)616 static int ks0127_querystd(struct v4l2_subdev *sd, v4l2_std_id *std)
617 {
618 	v4l2_dbg(1, debug, sd, "querystd\n");
619 	return ks0127_status(sd, NULL, std);
620 }
621 
ks0127_g_input_status(struct v4l2_subdev * sd,u32 * status)622 static int ks0127_g_input_status(struct v4l2_subdev *sd, u32 *status)
623 {
624 	v4l2_dbg(1, debug, sd, "g_input_status\n");
625 	return ks0127_status(sd, status, NULL);
626 }
627 
628 /* ----------------------------------------------------------------------- */
629 
630 static const struct v4l2_subdev_video_ops ks0127_video_ops = {
631 	.s_std = ks0127_s_std,
632 	.s_routing = ks0127_s_routing,
633 	.s_stream = ks0127_s_stream,
634 	.querystd = ks0127_querystd,
635 	.g_input_status = ks0127_g_input_status,
636 };
637 
638 static const struct v4l2_subdev_ops ks0127_ops = {
639 	.video = &ks0127_video_ops,
640 };
641 
642 /* ----------------------------------------------------------------------- */
643 
644 
ks0127_probe(struct i2c_client * client)645 static int ks0127_probe(struct i2c_client *client)
646 {
647 	struct ks0127 *ks;
648 	struct v4l2_subdev *sd;
649 
650 	v4l_info(client, "%s chip found @ 0x%x (%s)\n",
651 		client->addr == (I2C_KS0127_ADDON >> 1) ? "addon" : "on-board",
652 		client->addr << 1, client->adapter->name);
653 
654 	ks = devm_kzalloc(&client->dev, sizeof(*ks), GFP_KERNEL);
655 	if (ks == NULL)
656 		return -ENOMEM;
657 	sd = &ks->sd;
658 	v4l2_i2c_subdev_init(sd, client, &ks0127_ops);
659 
660 	/* power up */
661 	init_reg_defaults();
662 	ks0127_write(sd, KS_CMDA, 0x2c);
663 	mdelay(10);
664 
665 	/* reset the device */
666 	ks0127_init(sd);
667 	return 0;
668 }
669 
ks0127_remove(struct i2c_client * client)670 static void ks0127_remove(struct i2c_client *client)
671 {
672 	struct v4l2_subdev *sd = i2c_get_clientdata(client);
673 
674 	v4l2_device_unregister_subdev(sd);
675 	ks0127_write(sd, KS_OFMTA, 0x20); /* tristate */
676 	ks0127_write(sd, KS_CMDA, 0x2c | 0x80); /* power down */
677 }
678 
679 static const struct i2c_device_id ks0127_id[] = {
680 	{ "ks0127" },
681 	{ "ks0127b" },
682 	{ "ks0122s" },
683 	{ }
684 };
685 MODULE_DEVICE_TABLE(i2c, ks0127_id);
686 
687 static struct i2c_driver ks0127_driver = {
688 	.driver = {
689 		.name	= "ks0127",
690 	},
691 	.probe		= ks0127_probe,
692 	.remove		= ks0127_remove,
693 	.id_table	= ks0127_id,
694 };
695 
696 module_i2c_driver(ks0127_driver);
697