1 // SPDX-License-Identifier: GPL-2.0-only
2 /******************************************************************************
3 *
4 * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
5 *
6 * Contact Information:
7 * Intel Linux Wireless <ilw@linux.intel.com>
8 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
9 *
10 *****************************************************************************/
11
12 #include <linux/kernel.h>
13 #include <linux/skbuff.h>
14 #include <linux/slab.h>
15 #include <net/mac80211.h>
16
17 #include <linux/netdevice.h>
18 #include <linux/etherdevice.h>
19 #include <linux/delay.h>
20
21 #include <linux/workqueue.h>
22
23 #include "commands.h"
24 #include "3945.h"
25
26 #define RS_NAME "iwl-3945-rs"
27
28 static s32 il3945_expected_tpt_g[RATE_COUNT_3945] = {
29 7, 13, 35, 58, 0, 0, 76, 104, 130, 168, 191, 202
30 };
31
32 static s32 il3945_expected_tpt_g_prot[RATE_COUNT_3945] = {
33 7, 13, 35, 58, 0, 0, 0, 80, 93, 113, 123, 125
34 };
35
36 static s32 il3945_expected_tpt_a[RATE_COUNT_3945] = {
37 0, 0, 0, 0, 40, 57, 72, 98, 121, 154, 177, 186
38 };
39
40 static s32 il3945_expected_tpt_b[RATE_COUNT_3945] = {
41 7, 13, 35, 58, 0, 0, 0, 0, 0, 0, 0, 0
42 };
43
44 struct il3945_tpt_entry {
45 s8 min_rssi;
46 u8 idx;
47 };
48
49 static struct il3945_tpt_entry il3945_tpt_table_a[] = {
50 {-60, RATE_54M_IDX},
51 {-64, RATE_48M_IDX},
52 {-72, RATE_36M_IDX},
53 {-80, RATE_24M_IDX},
54 {-84, RATE_18M_IDX},
55 {-85, RATE_12M_IDX},
56 {-87, RATE_9M_IDX},
57 {-89, RATE_6M_IDX}
58 };
59
60 static struct il3945_tpt_entry il3945_tpt_table_g[] = {
61 {-60, RATE_54M_IDX},
62 {-64, RATE_48M_IDX},
63 {-68, RATE_36M_IDX},
64 {-80, RATE_24M_IDX},
65 {-84, RATE_18M_IDX},
66 {-85, RATE_12M_IDX},
67 {-86, RATE_11M_IDX},
68 {-88, RATE_5M_IDX},
69 {-90, RATE_2M_IDX},
70 {-92, RATE_1M_IDX}
71 };
72
73 #define RATE_MAX_WINDOW 62
74 #define RATE_FLUSH (3*HZ)
75 #define RATE_WIN_FLUSH (HZ/2)
76 #define IL39_RATE_HIGH_TH 11520
77 #define IL_SUCCESS_UP_TH 8960
78 #define IL_SUCCESS_DOWN_TH 10880
79 #define RATE_MIN_FAILURE_TH 6
80 #define RATE_MIN_SUCCESS_TH 8
81 #define RATE_DECREASE_TH 1920
82 #define RATE_RETRY_TH 15
83
84 static u8
il3945_get_rate_idx_by_rssi(s32 rssi,enum nl80211_band band)85 il3945_get_rate_idx_by_rssi(s32 rssi, enum nl80211_band band)
86 {
87 u32 idx = 0;
88 u32 table_size = 0;
89 struct il3945_tpt_entry *tpt_table = NULL;
90
91 if (rssi < IL_MIN_RSSI_VAL || rssi > IL_MAX_RSSI_VAL)
92 rssi = IL_MIN_RSSI_VAL;
93
94 switch (band) {
95 case NL80211_BAND_2GHZ:
96 tpt_table = il3945_tpt_table_g;
97 table_size = ARRAY_SIZE(il3945_tpt_table_g);
98 break;
99 case NL80211_BAND_5GHZ:
100 tpt_table = il3945_tpt_table_a;
101 table_size = ARRAY_SIZE(il3945_tpt_table_a);
102 break;
103 default:
104 BUG();
105 break;
106 }
107
108 while (idx < table_size && rssi < tpt_table[idx].min_rssi)
109 idx++;
110
111 idx = min(idx, table_size - 1);
112
113 return tpt_table[idx].idx;
114 }
115
116 static void
il3945_clear_win(struct il3945_rate_scale_data * win)117 il3945_clear_win(struct il3945_rate_scale_data *win)
118 {
119 win->data = 0;
120 win->success_counter = 0;
121 win->success_ratio = -1;
122 win->counter = 0;
123 win->average_tpt = IL_INVALID_VALUE;
124 win->stamp = 0;
125 }
126
127 /*
128 * il3945_rate_scale_flush_wins - flush out the rate scale wins
129 *
130 * Returns the number of wins that have gathered data but were
131 * not flushed. If there were any that were not flushed, then
132 * reschedule the rate flushing routine.
133 */
134 static int
il3945_rate_scale_flush_wins(struct il3945_rs_sta * rs_sta)135 il3945_rate_scale_flush_wins(struct il3945_rs_sta *rs_sta)
136 {
137 int unflushed = 0;
138 int i;
139 unsigned long flags;
140 struct il_priv *il __maybe_unused = rs_sta->il;
141
142 /*
143 * For each rate, if we have collected data on that rate
144 * and it has been more than RATE_WIN_FLUSH
145 * since we flushed, clear out the gathered stats
146 */
147 for (i = 0; i < RATE_COUNT_3945; i++) {
148 if (!rs_sta->win[i].counter)
149 continue;
150
151 spin_lock_irqsave(&rs_sta->lock, flags);
152 if (time_after(jiffies, rs_sta->win[i].stamp + RATE_WIN_FLUSH)) {
153 D_RATE("flushing %d samples of rate " "idx %d\n",
154 rs_sta->win[i].counter, i);
155 il3945_clear_win(&rs_sta->win[i]);
156 } else
157 unflushed++;
158 spin_unlock_irqrestore(&rs_sta->lock, flags);
159 }
160
161 return unflushed;
162 }
163
164 #define RATE_FLUSH_MAX 5000 /* msec */
165 #define RATE_FLUSH_MIN 50 /* msec */
166 #define IL_AVERAGE_PACKETS 1500
167
168 static void
il3945_bg_rate_scale_flush(struct timer_list * t)169 il3945_bg_rate_scale_flush(struct timer_list *t)
170 {
171 struct il3945_rs_sta *rs_sta = from_timer(rs_sta, t, rate_scale_flush);
172 struct il_priv *il __maybe_unused = rs_sta->il;
173 int unflushed = 0;
174 unsigned long flags;
175 u32 packet_count, duration, pps;
176
177 D_RATE("enter\n");
178
179 unflushed = il3945_rate_scale_flush_wins(rs_sta);
180
181 spin_lock_irqsave(&rs_sta->lock, flags);
182
183 /* Number of packets Rx'd since last time this timer ran */
184 packet_count = (rs_sta->tx_packets - rs_sta->last_tx_packets) + 1;
185
186 rs_sta->last_tx_packets = rs_sta->tx_packets + 1;
187
188 if (unflushed) {
189 duration =
190 jiffies_to_msecs(jiffies - rs_sta->last_partial_flush);
191
192 D_RATE("Tx'd %d packets in %dms\n", packet_count, duration);
193
194 /* Determine packets per second */
195 if (duration)
196 pps = (packet_count * 1000) / duration;
197 else
198 pps = 0;
199
200 if (pps) {
201 duration = (IL_AVERAGE_PACKETS * 1000) / pps;
202 if (duration < RATE_FLUSH_MIN)
203 duration = RATE_FLUSH_MIN;
204 else if (duration > RATE_FLUSH_MAX)
205 duration = RATE_FLUSH_MAX;
206 } else
207 duration = RATE_FLUSH_MAX;
208
209 rs_sta->flush_time = msecs_to_jiffies(duration);
210
211 D_RATE("new flush period: %d msec ave %d\n", duration,
212 packet_count);
213
214 mod_timer(&rs_sta->rate_scale_flush,
215 jiffies + rs_sta->flush_time);
216
217 rs_sta->last_partial_flush = jiffies;
218 } else {
219 rs_sta->flush_time = RATE_FLUSH;
220 rs_sta->flush_pending = 0;
221 }
222 /* If there weren't any unflushed entries, we don't schedule the timer
223 * to run again */
224
225 rs_sta->last_flush = jiffies;
226
227 spin_unlock_irqrestore(&rs_sta->lock, flags);
228
229 D_RATE("leave\n");
230 }
231
232 /*
233 * il3945_collect_tx_data - Update the success/failure sliding win
234 *
235 * We keep a sliding win of the last 64 packets transmitted
236 * at this rate. win->data contains the bitmask of successful
237 * packets.
238 */
239 static void
il3945_collect_tx_data(struct il3945_rs_sta * rs_sta,struct il3945_rate_scale_data * win,int success,int retries,int idx)240 il3945_collect_tx_data(struct il3945_rs_sta *rs_sta,
241 struct il3945_rate_scale_data *win, int success,
242 int retries, int idx)
243 {
244 unsigned long flags;
245 s32 fail_count;
246 struct il_priv *il __maybe_unused = rs_sta->il;
247
248 if (!retries) {
249 D_RATE("leave: retries == 0 -- should be at least 1\n");
250 return;
251 }
252
253 spin_lock_irqsave(&rs_sta->lock, flags);
254
255 /*
256 * Keep track of only the latest 62 tx frame attempts in this rate's
257 * history win; anything older isn't really relevant any more.
258 * If we have filled up the sliding win, drop the oldest attempt;
259 * if the oldest attempt (highest bit in bitmap) shows "success",
260 * subtract "1" from the success counter (this is the main reason
261 * we keep these bitmaps!).
262 * */
263 while (retries > 0) {
264 if (win->counter >= RATE_MAX_WINDOW) {
265
266 /* remove earliest */
267 win->counter = RATE_MAX_WINDOW - 1;
268
269 if (win->data & (1ULL << (RATE_MAX_WINDOW - 1))) {
270 win->data &= ~(1ULL << (RATE_MAX_WINDOW - 1));
271 win->success_counter--;
272 }
273 }
274
275 /* Increment frames-attempted counter */
276 win->counter++;
277
278 /* Shift bitmap by one frame (throw away oldest history),
279 * OR in "1", and increment "success" if this
280 * frame was successful. */
281 win->data <<= 1;
282 if (success > 0) {
283 win->success_counter++;
284 win->data |= 0x1;
285 success--;
286 }
287
288 retries--;
289 }
290
291 /* Calculate current success ratio, avoid divide-by-0! */
292 if (win->counter > 0)
293 win->success_ratio =
294 128 * (100 * win->success_counter) / win->counter;
295 else
296 win->success_ratio = IL_INVALID_VALUE;
297
298 fail_count = win->counter - win->success_counter;
299
300 /* Calculate average throughput, if we have enough history. */
301 if (fail_count >= RATE_MIN_FAILURE_TH ||
302 win->success_counter >= RATE_MIN_SUCCESS_TH)
303 win->average_tpt =
304 ((win->success_ratio * rs_sta->expected_tpt[idx] +
305 64) / 128);
306 else
307 win->average_tpt = IL_INVALID_VALUE;
308
309 /* Tag this win as having been updated */
310 win->stamp = jiffies;
311
312 spin_unlock_irqrestore(&rs_sta->lock, flags);
313 }
314
315 /*
316 * Called after adding a new station to initialize rate scaling
317 */
318 void
il3945_rs_rate_init(struct il_priv * il,struct ieee80211_sta * sta,u8 sta_id)319 il3945_rs_rate_init(struct il_priv *il, struct ieee80211_sta *sta, u8 sta_id)
320 {
321 struct ieee80211_hw *hw = il->hw;
322 struct ieee80211_conf *conf = &il->hw->conf;
323 struct il3945_sta_priv *psta;
324 struct il3945_rs_sta *rs_sta;
325 struct ieee80211_supported_band *sband;
326 int i;
327
328 D_INFO("enter\n");
329 if (sta_id == il->hw_params.bcast_id)
330 goto out;
331
332 psta = (struct il3945_sta_priv *)sta->drv_priv;
333 rs_sta = &psta->rs_sta;
334 sband = hw->wiphy->bands[conf->chandef.chan->band];
335
336 rs_sta->il = il;
337
338 rs_sta->start_rate = RATE_INVALID;
339
340 /* default to just 802.11b */
341 rs_sta->expected_tpt = il3945_expected_tpt_b;
342
343 rs_sta->last_partial_flush = jiffies;
344 rs_sta->last_flush = jiffies;
345 rs_sta->flush_time = RATE_FLUSH;
346 rs_sta->last_tx_packets = 0;
347
348 for (i = 0; i < RATE_COUNT_3945; i++)
349 il3945_clear_win(&rs_sta->win[i]);
350
351 /* TODO: what is a good starting rate for STA? About middle? Maybe not
352 * the lowest or the highest rate.. Could consider using RSSI from
353 * previous packets? Need to have IEEE 802.1X auth succeed immediately
354 * after assoc.. */
355
356 for (i = sband->n_bitrates - 1; i >= 0; i--) {
357 if (sta->deflink.supp_rates[sband->band] & (1 << i)) {
358 rs_sta->last_txrate_idx = i;
359 break;
360 }
361 }
362
363 il->_3945.sta_supp_rates = sta->deflink.supp_rates[sband->band];
364 /* For 5 GHz band it start at IL_FIRST_OFDM_RATE */
365 if (sband->band == NL80211_BAND_5GHZ) {
366 rs_sta->last_txrate_idx += IL_FIRST_OFDM_RATE;
367 il->_3945.sta_supp_rates <<= IL_FIRST_OFDM_RATE;
368 }
369
370 out:
371 il->stations[sta_id].used &= ~IL_STA_UCODE_INPROGRESS;
372
373 D_INFO("leave\n");
374 }
375
376 static void *
il3945_rs_alloc(struct ieee80211_hw * hw)377 il3945_rs_alloc(struct ieee80211_hw *hw)
378 {
379 return hw->priv;
380 }
381
382 /* rate scale requires free function to be implemented */
383 static void
il3945_rs_free(void * il)384 il3945_rs_free(void *il)
385 {
386 }
387
388 static void *
il3945_rs_alloc_sta(void * il_priv,struct ieee80211_sta * sta,gfp_t gfp)389 il3945_rs_alloc_sta(void *il_priv, struct ieee80211_sta *sta, gfp_t gfp)
390 {
391 struct il3945_rs_sta *rs_sta;
392 struct il3945_sta_priv *psta = (void *)sta->drv_priv;
393 struct il_priv *il __maybe_unused = il_priv;
394
395 D_RATE("enter\n");
396
397 rs_sta = &psta->rs_sta;
398
399 spin_lock_init(&rs_sta->lock);
400 timer_setup(&rs_sta->rate_scale_flush, il3945_bg_rate_scale_flush, 0);
401 D_RATE("leave\n");
402
403 return rs_sta;
404 }
405
406 static void
il3945_rs_free_sta(void * il_priv,struct ieee80211_sta * sta,void * il_sta)407 il3945_rs_free_sta(void *il_priv, struct ieee80211_sta *sta, void *il_sta)
408 {
409 struct il3945_rs_sta *rs_sta = il_sta;
410
411 /*
412 * Be careful not to use any members of il3945_rs_sta (like trying
413 * to use il_priv to print out debugging) since it may not be fully
414 * initialized at this point.
415 */
416 del_timer_sync(&rs_sta->rate_scale_flush);
417 }
418
419 /*
420 * il3945_rs_tx_status - Update rate control values based on Tx results
421 *
422 * NOTE: Uses il_priv->retry_rate for the # of retries attempted by
423 * the hardware for each rate.
424 */
425 static void
il3945_rs_tx_status(void * il_rate,struct ieee80211_supported_band * sband,struct ieee80211_sta * sta,void * il_sta,struct sk_buff * skb)426 il3945_rs_tx_status(void *il_rate, struct ieee80211_supported_band *sband,
427 struct ieee80211_sta *sta, void *il_sta,
428 struct sk_buff *skb)
429 {
430 s8 retries = 0, current_count;
431 int scale_rate_idx, first_idx, last_idx;
432 unsigned long flags;
433 struct il_priv *il = (struct il_priv *)il_rate;
434 struct il3945_rs_sta *rs_sta = il_sta;
435 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
436
437 D_RATE("enter\n");
438
439 retries = info->status.rates[0].count;
440 /* Sanity Check for retries */
441 if (retries > RATE_RETRY_TH)
442 retries = RATE_RETRY_TH;
443
444 first_idx = sband->bitrates[info->status.rates[0].idx].hw_value;
445 if (first_idx < 0 || first_idx >= RATE_COUNT_3945) {
446 D_RATE("leave: Rate out of bounds: %d\n", first_idx);
447 return;
448 }
449
450 if (!il_sta) {
451 D_RATE("leave: No STA il data to update!\n");
452 return;
453 }
454
455 /* Treat uninitialized rate scaling data same as non-existing. */
456 if (!rs_sta->il) {
457 D_RATE("leave: STA il data uninitialized!\n");
458 return;
459 }
460
461 rs_sta->tx_packets++;
462
463 scale_rate_idx = first_idx;
464 last_idx = first_idx;
465
466 /*
467 * Update the win for each rate. We determine which rates
468 * were Tx'd based on the total number of retries vs. the number
469 * of retries configured for each rate -- currently set to the
470 * il value 'retry_rate' vs. rate specific
471 *
472 * On exit from this while loop last_idx indicates the rate
473 * at which the frame was finally transmitted (or failed if no
474 * ACK)
475 */
476 while (retries > 1) {
477 if ((retries - 1) < il->retry_rate) {
478 current_count = (retries - 1);
479 last_idx = scale_rate_idx;
480 } else {
481 current_count = il->retry_rate;
482 last_idx = il3945_rs_next_rate(il, scale_rate_idx);
483 }
484
485 /* Update this rate accounting for as many retries
486 * as was used for it (per current_count) */
487 il3945_collect_tx_data(rs_sta, &rs_sta->win[scale_rate_idx], 0,
488 current_count, scale_rate_idx);
489 D_RATE("Update rate %d for %d retries.\n", scale_rate_idx,
490 current_count);
491
492 retries -= current_count;
493
494 scale_rate_idx = last_idx;
495 }
496
497 /* Update the last idx win with success/failure based on ACK */
498 D_RATE("Update rate %d with %s.\n", last_idx,
499 (info->flags & IEEE80211_TX_STAT_ACK) ? "success" : "failure");
500 il3945_collect_tx_data(rs_sta, &rs_sta->win[last_idx],
501 info->flags & IEEE80211_TX_STAT_ACK, 1,
502 last_idx);
503
504 /* We updated the rate scale win -- if its been more than
505 * flush_time since the last run, schedule the flush
506 * again */
507 spin_lock_irqsave(&rs_sta->lock, flags);
508
509 if (!rs_sta->flush_pending &&
510 time_after(jiffies, rs_sta->last_flush + rs_sta->flush_time)) {
511
512 rs_sta->last_partial_flush = jiffies;
513 rs_sta->flush_pending = 1;
514 mod_timer(&rs_sta->rate_scale_flush,
515 jiffies + rs_sta->flush_time);
516 }
517
518 spin_unlock_irqrestore(&rs_sta->lock, flags);
519
520 D_RATE("leave\n");
521 }
522
523 static u16
il3945_get_adjacent_rate(struct il3945_rs_sta * rs_sta,u8 idx,u16 rate_mask,enum nl80211_band band)524 il3945_get_adjacent_rate(struct il3945_rs_sta *rs_sta, u8 idx, u16 rate_mask,
525 enum nl80211_band band)
526 {
527 u8 high = RATE_INVALID;
528 u8 low = RATE_INVALID;
529 struct il_priv *il __maybe_unused = rs_sta->il;
530
531 /* 802.11A walks to the next literal adjacent rate in
532 * the rate table */
533 if (unlikely(band == NL80211_BAND_5GHZ)) {
534 int i;
535 u32 mask;
536
537 /* Find the previous rate that is in the rate mask */
538 i = idx - 1;
539 for (mask = (1 << i); i >= 0; i--, mask >>= 1) {
540 if (rate_mask & mask) {
541 low = i;
542 break;
543 }
544 }
545
546 /* Find the next rate that is in the rate mask */
547 i = idx + 1;
548 for (mask = (1 << i); i < RATE_COUNT_3945; i++, mask <<= 1) {
549 if (rate_mask & mask) {
550 high = i;
551 break;
552 }
553 }
554
555 return (high << 8) | low;
556 }
557
558 low = idx;
559 while (low != RATE_INVALID) {
560 if (rs_sta->tgg)
561 low = il3945_rates[low].prev_rs_tgg;
562 else
563 low = il3945_rates[low].prev_rs;
564 if (low == RATE_INVALID)
565 break;
566 if (rate_mask & (1 << low))
567 break;
568 D_RATE("Skipping masked lower rate: %d\n", low);
569 }
570
571 high = idx;
572 while (high != RATE_INVALID) {
573 if (rs_sta->tgg)
574 high = il3945_rates[high].next_rs_tgg;
575 else
576 high = il3945_rates[high].next_rs;
577 if (high == RATE_INVALID)
578 break;
579 if (rate_mask & (1 << high))
580 break;
581 D_RATE("Skipping masked higher rate: %d\n", high);
582 }
583
584 return (high << 8) | low;
585 }
586
587 /*
588 * il3945_rs_get_rate - find the rate for the requested packet
589 *
590 * Returns the ieee80211_rate structure allocated by the driver.
591 *
592 * The rate control algorithm has no internal mapping between hw_mode's
593 * rate ordering and the rate ordering used by the rate control algorithm.
594 *
595 * The rate control algorithm uses a single table of rates that goes across
596 * the entire A/B/G spectrum vs. being limited to just one particular
597 * hw_mode.
598 *
599 * As such, we can't convert the idx obtained below into the hw_mode's
600 * rate table and must reference the driver allocated rate table
601 *
602 */
603 static void
il3945_rs_get_rate(void * il_r,struct ieee80211_sta * sta,void * il_sta,struct ieee80211_tx_rate_control * txrc)604 il3945_rs_get_rate(void *il_r, struct ieee80211_sta *sta, void *il_sta,
605 struct ieee80211_tx_rate_control *txrc)
606 {
607 struct ieee80211_supported_band *sband = txrc->sband;
608 struct sk_buff *skb = txrc->skb;
609 u8 low = RATE_INVALID;
610 u8 high = RATE_INVALID;
611 u16 high_low;
612 int idx;
613 struct il3945_rs_sta *rs_sta = il_sta;
614 struct il3945_rate_scale_data *win = NULL;
615 int current_tpt = IL_INVALID_VALUE;
616 int low_tpt = IL_INVALID_VALUE;
617 int high_tpt = IL_INVALID_VALUE;
618 u32 fail_count;
619 s8 scale_action = 0;
620 unsigned long flags;
621 u16 rate_mask;
622 s8 max_rate_idx = -1;
623 struct il_priv *il __maybe_unused = (struct il_priv *)il_r;
624 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
625
626 D_RATE("enter\n");
627
628 /* Treat uninitialized rate scaling data same as non-existing. */
629 if (rs_sta && !rs_sta->il) {
630 D_RATE("Rate scaling information not initialized yet.\n");
631 il_sta = NULL;
632 }
633
634 rate_mask = sta->deflink.supp_rates[sband->band];
635
636 /* get user max rate if set */
637 max_rate_idx = fls(txrc->rate_idx_mask) - 1;
638 if (sband->band == NL80211_BAND_5GHZ && max_rate_idx != -1)
639 max_rate_idx += IL_FIRST_OFDM_RATE;
640 if (max_rate_idx < 0 || max_rate_idx >= RATE_COUNT)
641 max_rate_idx = -1;
642
643 idx = min(rs_sta->last_txrate_idx & 0xffff, RATE_COUNT_3945 - 1);
644
645 if (sband->band == NL80211_BAND_5GHZ)
646 rate_mask = rate_mask << IL_FIRST_OFDM_RATE;
647
648 spin_lock_irqsave(&rs_sta->lock, flags);
649
650 /* for recent assoc, choose best rate regarding
651 * to rssi value
652 */
653 if (rs_sta->start_rate != RATE_INVALID) {
654 if (rs_sta->start_rate < idx &&
655 (rate_mask & (1 << rs_sta->start_rate)))
656 idx = rs_sta->start_rate;
657 rs_sta->start_rate = RATE_INVALID;
658 }
659
660 /* force user max rate if set by user */
661 if (max_rate_idx != -1 && max_rate_idx < idx) {
662 if (rate_mask & (1 << max_rate_idx))
663 idx = max_rate_idx;
664 }
665
666 win = &(rs_sta->win[idx]);
667
668 fail_count = win->counter - win->success_counter;
669
670 if (fail_count < RATE_MIN_FAILURE_TH &&
671 win->success_counter < RATE_MIN_SUCCESS_TH) {
672 spin_unlock_irqrestore(&rs_sta->lock, flags);
673
674 D_RATE("Invalid average_tpt on rate %d: "
675 "counter: %d, success_counter: %d, "
676 "expected_tpt is %sNULL\n", idx, win->counter,
677 win->success_counter,
678 rs_sta->expected_tpt ? "not " : "");
679
680 /* Can't calculate this yet; not enough history */
681 win->average_tpt = IL_INVALID_VALUE;
682 goto out;
683
684 }
685
686 current_tpt = win->average_tpt;
687
688 high_low =
689 il3945_get_adjacent_rate(rs_sta, idx, rate_mask, sband->band);
690 low = high_low & 0xff;
691 high = (high_low >> 8) & 0xff;
692
693 /* If user set max rate, dont allow higher than user constrain */
694 if (max_rate_idx != -1 && max_rate_idx < high)
695 high = RATE_INVALID;
696
697 /* Collect Measured throughputs of adjacent rates */
698 if (low != RATE_INVALID)
699 low_tpt = rs_sta->win[low].average_tpt;
700
701 if (high != RATE_INVALID)
702 high_tpt = rs_sta->win[high].average_tpt;
703
704 spin_unlock_irqrestore(&rs_sta->lock, flags);
705
706 scale_action = 0;
707
708 /* Low success ratio , need to drop the rate */
709 if (win->success_ratio < RATE_DECREASE_TH || !current_tpt) {
710 D_RATE("decrease rate because of low success_ratio\n");
711 scale_action = -1;
712 /* No throughput measured yet for adjacent rates,
713 * try increase */
714 } else if (low_tpt == IL_INVALID_VALUE && high_tpt == IL_INVALID_VALUE) {
715
716 if (high != RATE_INVALID &&
717 win->success_ratio >= RATE_INCREASE_TH)
718 scale_action = 1;
719 else if (low != RATE_INVALID)
720 scale_action = 0;
721
722 /* Both adjacent throughputs are measured, but neither one has
723 * better throughput; we're using the best rate, don't change
724 * it! */
725 } else if (low_tpt != IL_INVALID_VALUE && high_tpt != IL_INVALID_VALUE
726 && low_tpt < current_tpt && high_tpt < current_tpt) {
727
728 D_RATE("No action -- low [%d] & high [%d] < "
729 "current_tpt [%d]\n", low_tpt, high_tpt, current_tpt);
730 scale_action = 0;
731
732 /* At least one of the rates has better throughput */
733 } else {
734 if (high_tpt != IL_INVALID_VALUE) {
735
736 /* High rate has better throughput, Increase
737 * rate */
738 if (high_tpt > current_tpt &&
739 win->success_ratio >= RATE_INCREASE_TH)
740 scale_action = 1;
741 else {
742 D_RATE("decrease rate because of high tpt\n");
743 scale_action = 0;
744 }
745 } else if (low_tpt != IL_INVALID_VALUE) {
746 if (low_tpt > current_tpt) {
747 D_RATE("decrease rate because of low tpt\n");
748 scale_action = -1;
749 } else if (win->success_ratio >= RATE_INCREASE_TH) {
750 /* Lower rate has better
751 * throughput,decrease rate */
752 scale_action = 1;
753 }
754 }
755 }
756
757 /* Sanity check; asked for decrease, but success rate or throughput
758 * has been good at old rate. Don't change it. */
759 if (scale_action == -1 && low != RATE_INVALID &&
760 (win->success_ratio > RATE_HIGH_TH ||
761 current_tpt > 100 * rs_sta->expected_tpt[low]))
762 scale_action = 0;
763
764 switch (scale_action) {
765 case -1:
766 /* Decrease rate */
767 if (low != RATE_INVALID)
768 idx = low;
769 break;
770 case 1:
771 /* Increase rate */
772 if (high != RATE_INVALID)
773 idx = high;
774
775 break;
776 case 0:
777 default:
778 /* No change */
779 break;
780 }
781
782 D_RATE("Selected %d (action %d) - low %d high %d\n", idx, scale_action,
783 low, high);
784
785 out:
786
787 if (sband->band == NL80211_BAND_5GHZ) {
788 if (WARN_ON_ONCE(idx < IL_FIRST_OFDM_RATE))
789 idx = IL_FIRST_OFDM_RATE;
790 rs_sta->last_txrate_idx = idx;
791 info->control.rates[0].idx = idx - IL_FIRST_OFDM_RATE;
792 } else {
793 rs_sta->last_txrate_idx = idx;
794 info->control.rates[0].idx = rs_sta->last_txrate_idx;
795 }
796 info->control.rates[0].count = 1;
797
798 D_RATE("leave: %d\n", idx);
799 }
800
801 #ifdef CONFIG_MAC80211_DEBUGFS
802
803 static ssize_t
il3945_sta_dbgfs_stats_table_read(struct file * file,char __user * user_buf,size_t count,loff_t * ppos)804 il3945_sta_dbgfs_stats_table_read(struct file *file, char __user *user_buf,
805 size_t count, loff_t *ppos)
806 {
807 char *buff;
808 int desc = 0;
809 int j;
810 ssize_t ret;
811 struct il3945_rs_sta *lq_sta = file->private_data;
812
813 buff = kmalloc(1024, GFP_KERNEL);
814 if (!buff)
815 return -ENOMEM;
816
817 desc +=
818 sprintf(buff + desc,
819 "tx packets=%d last rate idx=%d\n"
820 "rate=0x%X flush time %d\n", lq_sta->tx_packets,
821 lq_sta->last_txrate_idx, lq_sta->start_rate,
822 jiffies_to_msecs(lq_sta->flush_time));
823 for (j = 0; j < RATE_COUNT_3945; j++) {
824 desc +=
825 sprintf(buff + desc, "counter=%d success=%d %%=%d\n",
826 lq_sta->win[j].counter,
827 lq_sta->win[j].success_counter,
828 lq_sta->win[j].success_ratio);
829 }
830 ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc);
831 kfree(buff);
832 return ret;
833 }
834
835 static const struct file_operations rs_sta_dbgfs_stats_table_ops = {
836 .read = il3945_sta_dbgfs_stats_table_read,
837 .open = simple_open,
838 .llseek = default_llseek,
839 };
840
841 static void
il3945_add_debugfs(void * il,void * il_sta,struct dentry * dir)842 il3945_add_debugfs(void *il, void *il_sta, struct dentry *dir)
843 {
844 struct il3945_rs_sta *lq_sta = il_sta;
845
846 debugfs_create_file("rate_stats_table", 0600, dir, lq_sta,
847 &rs_sta_dbgfs_stats_table_ops);
848 }
849 #endif
850
851 /*
852 * Initialization of rate scaling information is done by driver after
853 * the station is added. Since mac80211 calls this function before a
854 * station is added we ignore it.
855 */
856 static void
il3945_rs_rate_init_stub(void * il_r,struct ieee80211_supported_band * sband,struct cfg80211_chan_def * chandef,struct ieee80211_sta * sta,void * il_sta)857 il3945_rs_rate_init_stub(void *il_r, struct ieee80211_supported_band *sband,
858 struct cfg80211_chan_def *chandef,
859 struct ieee80211_sta *sta, void *il_sta)
860 {
861 }
862
863 static const struct rate_control_ops rs_ops = {
864 .name = RS_NAME,
865 .tx_status = il3945_rs_tx_status,
866 .get_rate = il3945_rs_get_rate,
867 .rate_init = il3945_rs_rate_init_stub,
868 .alloc = il3945_rs_alloc,
869 .free = il3945_rs_free,
870 .alloc_sta = il3945_rs_alloc_sta,
871 .free_sta = il3945_rs_free_sta,
872 #ifdef CONFIG_MAC80211_DEBUGFS
873 .add_sta_debugfs = il3945_add_debugfs,
874 #endif
875
876 };
877
878 void
il3945_rate_scale_init(struct ieee80211_hw * hw,s32 sta_id)879 il3945_rate_scale_init(struct ieee80211_hw *hw, s32 sta_id)
880 {
881 struct il_priv *il = hw->priv;
882 s32 rssi = 0;
883 unsigned long flags;
884 struct il3945_rs_sta *rs_sta;
885 struct ieee80211_sta *sta;
886 struct il3945_sta_priv *psta;
887
888 D_RATE("enter\n");
889
890 rcu_read_lock();
891
892 sta = ieee80211_find_sta(il->vif, il->stations[sta_id].sta.sta.addr);
893 if (!sta) {
894 D_RATE("Unable to find station to initialize rate scaling.\n");
895 rcu_read_unlock();
896 return;
897 }
898
899 psta = (void *)sta->drv_priv;
900 rs_sta = &psta->rs_sta;
901
902 spin_lock_irqsave(&rs_sta->lock, flags);
903
904 rs_sta->tgg = 0;
905 switch (il->band) {
906 case NL80211_BAND_2GHZ:
907 /* TODO: this always does G, not a regression */
908 if (il->active.flags & RXON_FLG_TGG_PROTECT_MSK) {
909 rs_sta->tgg = 1;
910 rs_sta->expected_tpt = il3945_expected_tpt_g_prot;
911 } else
912 rs_sta->expected_tpt = il3945_expected_tpt_g;
913 break;
914 case NL80211_BAND_5GHZ:
915 rs_sta->expected_tpt = il3945_expected_tpt_a;
916 break;
917 default:
918 BUG();
919 break;
920 }
921
922 spin_unlock_irqrestore(&rs_sta->lock, flags);
923
924 rssi = il->_3945.last_rx_rssi;
925 if (rssi == 0)
926 rssi = IL_MIN_RSSI_VAL;
927
928 D_RATE("Network RSSI: %d\n", rssi);
929
930 rs_sta->start_rate = il3945_get_rate_idx_by_rssi(rssi, il->band);
931
932 D_RATE("leave: rssi %d assign rate idx: " "%d (plcp 0x%x)\n", rssi,
933 rs_sta->start_rate, il3945_rates[rs_sta->start_rate].plcp);
934 rcu_read_unlock();
935 }
936
937 int
il3945_rate_control_register(void)938 il3945_rate_control_register(void)
939 {
940 return ieee80211_rate_control_register(&rs_ops);
941 }
942
943 void
il3945_rate_control_unregister(void)944 il3945_rate_control_unregister(void)
945 {
946 ieee80211_rate_control_unregister(&rs_ops);
947 }
948