1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Driver for the Diolan DLN-2 USB-SPI adapter
4 *
5 * Copyright (c) 2014 Intel Corporation
6 */
7
8 #include <linux/kernel.h>
9 #include <linux/module.h>
10 #include <linux/platform_device.h>
11 #include <linux/property.h>
12 #include <linux/mfd/dln2.h>
13 #include <linux/spi/spi.h>
14 #include <linux/pm_runtime.h>
15 #include <linux/unaligned.h>
16
17 #define DLN2_SPI_MODULE_ID 0x02
18 #define DLN2_SPI_CMD(cmd) DLN2_CMD(cmd, DLN2_SPI_MODULE_ID)
19
20 /* SPI commands */
21 #define DLN2_SPI_GET_PORT_COUNT DLN2_SPI_CMD(0x00)
22 #define DLN2_SPI_ENABLE DLN2_SPI_CMD(0x11)
23 #define DLN2_SPI_DISABLE DLN2_SPI_CMD(0x12)
24 #define DLN2_SPI_IS_ENABLED DLN2_SPI_CMD(0x13)
25 #define DLN2_SPI_SET_MODE DLN2_SPI_CMD(0x14)
26 #define DLN2_SPI_GET_MODE DLN2_SPI_CMD(0x15)
27 #define DLN2_SPI_SET_FRAME_SIZE DLN2_SPI_CMD(0x16)
28 #define DLN2_SPI_GET_FRAME_SIZE DLN2_SPI_CMD(0x17)
29 #define DLN2_SPI_SET_FREQUENCY DLN2_SPI_CMD(0x18)
30 #define DLN2_SPI_GET_FREQUENCY DLN2_SPI_CMD(0x19)
31 #define DLN2_SPI_READ_WRITE DLN2_SPI_CMD(0x1A)
32 #define DLN2_SPI_READ DLN2_SPI_CMD(0x1B)
33 #define DLN2_SPI_WRITE DLN2_SPI_CMD(0x1C)
34 #define DLN2_SPI_SET_DELAY_BETWEEN_SS DLN2_SPI_CMD(0x20)
35 #define DLN2_SPI_GET_DELAY_BETWEEN_SS DLN2_SPI_CMD(0x21)
36 #define DLN2_SPI_SET_DELAY_AFTER_SS DLN2_SPI_CMD(0x22)
37 #define DLN2_SPI_GET_DELAY_AFTER_SS DLN2_SPI_CMD(0x23)
38 #define DLN2_SPI_SET_DELAY_BETWEEN_FRAMES DLN2_SPI_CMD(0x24)
39 #define DLN2_SPI_GET_DELAY_BETWEEN_FRAMES DLN2_SPI_CMD(0x25)
40 #define DLN2_SPI_SET_SS DLN2_SPI_CMD(0x26)
41 #define DLN2_SPI_GET_SS DLN2_SPI_CMD(0x27)
42 #define DLN2_SPI_RELEASE_SS DLN2_SPI_CMD(0x28)
43 #define DLN2_SPI_SS_VARIABLE_ENABLE DLN2_SPI_CMD(0x2B)
44 #define DLN2_SPI_SS_VARIABLE_DISABLE DLN2_SPI_CMD(0x2C)
45 #define DLN2_SPI_SS_VARIABLE_IS_ENABLED DLN2_SPI_CMD(0x2D)
46 #define DLN2_SPI_SS_AAT_ENABLE DLN2_SPI_CMD(0x2E)
47 #define DLN2_SPI_SS_AAT_DISABLE DLN2_SPI_CMD(0x2F)
48 #define DLN2_SPI_SS_AAT_IS_ENABLED DLN2_SPI_CMD(0x30)
49 #define DLN2_SPI_SS_BETWEEN_FRAMES_ENABLE DLN2_SPI_CMD(0x31)
50 #define DLN2_SPI_SS_BETWEEN_FRAMES_DISABLE DLN2_SPI_CMD(0x32)
51 #define DLN2_SPI_SS_BETWEEN_FRAMES_IS_ENABLED DLN2_SPI_CMD(0x33)
52 #define DLN2_SPI_SET_CPHA DLN2_SPI_CMD(0x34)
53 #define DLN2_SPI_GET_CPHA DLN2_SPI_CMD(0x35)
54 #define DLN2_SPI_SET_CPOL DLN2_SPI_CMD(0x36)
55 #define DLN2_SPI_GET_CPOL DLN2_SPI_CMD(0x37)
56 #define DLN2_SPI_SS_MULTI_ENABLE DLN2_SPI_CMD(0x38)
57 #define DLN2_SPI_SS_MULTI_DISABLE DLN2_SPI_CMD(0x39)
58 #define DLN2_SPI_SS_MULTI_IS_ENABLED DLN2_SPI_CMD(0x3A)
59 #define DLN2_SPI_GET_SUPPORTED_MODES DLN2_SPI_CMD(0x40)
60 #define DLN2_SPI_GET_SUPPORTED_CPHA_VALUES DLN2_SPI_CMD(0x41)
61 #define DLN2_SPI_GET_SUPPORTED_CPOL_VALUES DLN2_SPI_CMD(0x42)
62 #define DLN2_SPI_GET_SUPPORTED_FRAME_SIZES DLN2_SPI_CMD(0x43)
63 #define DLN2_SPI_GET_SS_COUNT DLN2_SPI_CMD(0x44)
64 #define DLN2_SPI_GET_MIN_FREQUENCY DLN2_SPI_CMD(0x45)
65 #define DLN2_SPI_GET_MAX_FREQUENCY DLN2_SPI_CMD(0x46)
66 #define DLN2_SPI_GET_MIN_DELAY_BETWEEN_SS DLN2_SPI_CMD(0x47)
67 #define DLN2_SPI_GET_MAX_DELAY_BETWEEN_SS DLN2_SPI_CMD(0x48)
68 #define DLN2_SPI_GET_MIN_DELAY_AFTER_SS DLN2_SPI_CMD(0x49)
69 #define DLN2_SPI_GET_MAX_DELAY_AFTER_SS DLN2_SPI_CMD(0x4A)
70 #define DLN2_SPI_GET_MIN_DELAY_BETWEEN_FRAMES DLN2_SPI_CMD(0x4B)
71 #define DLN2_SPI_GET_MAX_DELAY_BETWEEN_FRAMES DLN2_SPI_CMD(0x4C)
72
73 #define DLN2_SPI_MAX_XFER_SIZE 256
74 #define DLN2_SPI_BUF_SIZE (DLN2_SPI_MAX_XFER_SIZE + 16)
75 #define DLN2_SPI_ATTR_LEAVE_SS_LOW BIT(0)
76 #define DLN2_TRANSFERS_WAIT_COMPLETE 1
77 #define DLN2_TRANSFERS_CANCEL 0
78 #define DLN2_RPM_AUTOSUSPEND_TIMEOUT 2000
79
80 struct dln2_spi {
81 struct platform_device *pdev;
82 struct spi_controller *host;
83 u8 port;
84
85 /*
86 * This buffer will be used mainly for read/write operations. Since
87 * they're quite large, we cannot use the stack. Protection is not
88 * needed because all SPI communication is serialized by the SPI core.
89 */
90 void *buf;
91
92 u8 bpw;
93 u32 speed;
94 u16 mode;
95 u8 cs;
96 };
97
98 /*
99 * Enable/Disable SPI module. The disable command will wait for transfers to
100 * complete first.
101 */
dln2_spi_enable(struct dln2_spi * dln2,bool enable)102 static int dln2_spi_enable(struct dln2_spi *dln2, bool enable)
103 {
104 u16 cmd;
105 struct {
106 u8 port;
107 u8 wait_for_completion;
108 } tx;
109 unsigned len = sizeof(tx);
110
111 tx.port = dln2->port;
112
113 if (enable) {
114 cmd = DLN2_SPI_ENABLE;
115 len -= sizeof(tx.wait_for_completion);
116 } else {
117 tx.wait_for_completion = DLN2_TRANSFERS_WAIT_COMPLETE;
118 cmd = DLN2_SPI_DISABLE;
119 }
120
121 return dln2_transfer_tx(dln2->pdev, cmd, &tx, len);
122 }
123
124 /*
125 * Select/unselect multiple CS lines. The selected lines will be automatically
126 * toggled LOW/HIGH by the board firmware during transfers, provided they're
127 * enabled first.
128 *
129 * Ex: cs_mask = 0x03 -> CS0 & CS1 will be selected and the next WR/RD operation
130 * will toggle the lines LOW/HIGH automatically.
131 */
dln2_spi_cs_set(struct dln2_spi * dln2,u8 cs_mask)132 static int dln2_spi_cs_set(struct dln2_spi *dln2, u8 cs_mask)
133 {
134 struct {
135 u8 port;
136 u8 cs;
137 } tx;
138
139 tx.port = dln2->port;
140
141 /*
142 * According to Diolan docs, "a slave device can be selected by changing
143 * the corresponding bit value to 0". The rest must be set to 1. Hence
144 * the bitwise NOT in front.
145 */
146 tx.cs = ~cs_mask;
147
148 return dln2_transfer_tx(dln2->pdev, DLN2_SPI_SET_SS, &tx, sizeof(tx));
149 }
150
151 /*
152 * Select one CS line. The other lines will be un-selected.
153 */
dln2_spi_cs_set_one(struct dln2_spi * dln2,u8 cs)154 static int dln2_spi_cs_set_one(struct dln2_spi *dln2, u8 cs)
155 {
156 return dln2_spi_cs_set(dln2, BIT(cs));
157 }
158
159 /*
160 * Enable/disable CS lines for usage. The module has to be disabled first.
161 */
dln2_spi_cs_enable(struct dln2_spi * dln2,u8 cs_mask,bool enable)162 static int dln2_spi_cs_enable(struct dln2_spi *dln2, u8 cs_mask, bool enable)
163 {
164 struct {
165 u8 port;
166 u8 cs;
167 } tx;
168 u16 cmd;
169
170 tx.port = dln2->port;
171 tx.cs = cs_mask;
172 cmd = enable ? DLN2_SPI_SS_MULTI_ENABLE : DLN2_SPI_SS_MULTI_DISABLE;
173
174 return dln2_transfer_tx(dln2->pdev, cmd, &tx, sizeof(tx));
175 }
176
dln2_spi_cs_enable_all(struct dln2_spi * dln2,bool enable)177 static int dln2_spi_cs_enable_all(struct dln2_spi *dln2, bool enable)
178 {
179 u8 cs_mask = GENMASK(dln2->host->num_chipselect - 1, 0);
180
181 return dln2_spi_cs_enable(dln2, cs_mask, enable);
182 }
183
dln2_spi_get_cs_num(struct dln2_spi * dln2,u16 * cs_num)184 static int dln2_spi_get_cs_num(struct dln2_spi *dln2, u16 *cs_num)
185 {
186 int ret;
187 struct {
188 u8 port;
189 } tx;
190 struct {
191 __le16 cs_count;
192 } rx;
193 unsigned rx_len = sizeof(rx);
194
195 tx.port = dln2->port;
196 ret = dln2_transfer(dln2->pdev, DLN2_SPI_GET_SS_COUNT, &tx, sizeof(tx),
197 &rx, &rx_len);
198 if (ret < 0)
199 return ret;
200 if (rx_len < sizeof(rx))
201 return -EPROTO;
202
203 *cs_num = le16_to_cpu(rx.cs_count);
204
205 dev_dbg(&dln2->pdev->dev, "cs_num = %d\n", *cs_num);
206
207 return 0;
208 }
209
dln2_spi_get_speed(struct dln2_spi * dln2,u16 cmd,u32 * freq)210 static int dln2_spi_get_speed(struct dln2_spi *dln2, u16 cmd, u32 *freq)
211 {
212 int ret;
213 struct {
214 u8 port;
215 } tx;
216 struct {
217 __le32 speed;
218 } rx;
219 unsigned rx_len = sizeof(rx);
220
221 tx.port = dln2->port;
222
223 ret = dln2_transfer(dln2->pdev, cmd, &tx, sizeof(tx), &rx, &rx_len);
224 if (ret < 0)
225 return ret;
226 if (rx_len < sizeof(rx))
227 return -EPROTO;
228
229 *freq = le32_to_cpu(rx.speed);
230
231 return 0;
232 }
233
234 /*
235 * Get bus min/max frequencies.
236 */
dln2_spi_get_speed_range(struct dln2_spi * dln2,u32 * fmin,u32 * fmax)237 static int dln2_spi_get_speed_range(struct dln2_spi *dln2, u32 *fmin, u32 *fmax)
238 {
239 int ret;
240
241 ret = dln2_spi_get_speed(dln2, DLN2_SPI_GET_MIN_FREQUENCY, fmin);
242 if (ret < 0)
243 return ret;
244
245 ret = dln2_spi_get_speed(dln2, DLN2_SPI_GET_MAX_FREQUENCY, fmax);
246 if (ret < 0)
247 return ret;
248
249 dev_dbg(&dln2->pdev->dev, "freq_min = %d, freq_max = %d\n",
250 *fmin, *fmax);
251
252 return 0;
253 }
254
255 /*
256 * Set the bus speed. The module will automatically round down to the closest
257 * available frequency and returns it. The module has to be disabled first.
258 */
dln2_spi_set_speed(struct dln2_spi * dln2,u32 speed)259 static int dln2_spi_set_speed(struct dln2_spi *dln2, u32 speed)
260 {
261 int ret;
262 struct {
263 u8 port;
264 __le32 speed;
265 } __packed tx;
266 struct {
267 __le32 speed;
268 } rx;
269 int rx_len = sizeof(rx);
270
271 tx.port = dln2->port;
272 tx.speed = cpu_to_le32(speed);
273
274 ret = dln2_transfer(dln2->pdev, DLN2_SPI_SET_FREQUENCY, &tx, sizeof(tx),
275 &rx, &rx_len);
276 if (ret < 0)
277 return ret;
278 if (rx_len < sizeof(rx))
279 return -EPROTO;
280
281 return 0;
282 }
283
284 /*
285 * Change CPOL & CPHA. The module has to be disabled first.
286 */
dln2_spi_set_mode(struct dln2_spi * dln2,u8 mode)287 static int dln2_spi_set_mode(struct dln2_spi *dln2, u8 mode)
288 {
289 struct {
290 u8 port;
291 u8 mode;
292 } tx;
293
294 tx.port = dln2->port;
295 tx.mode = mode;
296
297 return dln2_transfer_tx(dln2->pdev, DLN2_SPI_SET_MODE, &tx, sizeof(tx));
298 }
299
300 /*
301 * Change frame size. The module has to be disabled first.
302 */
dln2_spi_set_bpw(struct dln2_spi * dln2,u8 bpw)303 static int dln2_spi_set_bpw(struct dln2_spi *dln2, u8 bpw)
304 {
305 struct {
306 u8 port;
307 u8 bpw;
308 } tx;
309
310 tx.port = dln2->port;
311 tx.bpw = bpw;
312
313 return dln2_transfer_tx(dln2->pdev, DLN2_SPI_SET_FRAME_SIZE,
314 &tx, sizeof(tx));
315 }
316
dln2_spi_get_supported_frame_sizes(struct dln2_spi * dln2,u32 * bpw_mask)317 static int dln2_spi_get_supported_frame_sizes(struct dln2_spi *dln2,
318 u32 *bpw_mask)
319 {
320 int ret;
321 struct {
322 u8 port;
323 } tx;
324 struct {
325 u8 count;
326 u8 frame_sizes[36];
327 } *rx = dln2->buf;
328 unsigned rx_len = sizeof(*rx);
329 int i;
330
331 tx.port = dln2->port;
332
333 ret = dln2_transfer(dln2->pdev, DLN2_SPI_GET_SUPPORTED_FRAME_SIZES,
334 &tx, sizeof(tx), rx, &rx_len);
335 if (ret < 0)
336 return ret;
337 if (rx_len < sizeof(*rx))
338 return -EPROTO;
339 if (rx->count > ARRAY_SIZE(rx->frame_sizes))
340 return -EPROTO;
341
342 *bpw_mask = 0;
343 for (i = 0; i < rx->count; i++)
344 *bpw_mask |= BIT(rx->frame_sizes[i] - 1);
345
346 dev_dbg(&dln2->pdev->dev, "bpw_mask = 0x%X\n", *bpw_mask);
347
348 return 0;
349 }
350
351 /*
352 * Copy the data to DLN2 buffer and change the byte order to LE, requested by
353 * DLN2 module. SPI core makes sure that the data length is a multiple of word
354 * size.
355 */
dln2_spi_copy_to_buf(u8 * dln2_buf,const u8 * src,u16 len,u8 bpw)356 static int dln2_spi_copy_to_buf(u8 *dln2_buf, const u8 *src, u16 len, u8 bpw)
357 {
358 #ifdef __LITTLE_ENDIAN
359 memcpy(dln2_buf, src, len);
360 #else
361 if (bpw <= 8) {
362 memcpy(dln2_buf, src, len);
363 } else if (bpw <= 16) {
364 __le16 *d = (__le16 *)dln2_buf;
365 u16 *s = (u16 *)src;
366
367 len = len / 2;
368 while (len--)
369 *d++ = cpu_to_le16p(s++);
370 } else {
371 __le32 *d = (__le32 *)dln2_buf;
372 u32 *s = (u32 *)src;
373
374 len = len / 4;
375 while (len--)
376 *d++ = cpu_to_le32p(s++);
377 }
378 #endif
379
380 return 0;
381 }
382
383 /*
384 * Copy the data from DLN2 buffer and convert to CPU byte order since the DLN2
385 * buffer is LE ordered. SPI core makes sure that the data length is a multiple
386 * of word size. The RX dln2_buf is 2 byte aligned so, for BE, we have to make
387 * sure we avoid unaligned accesses for 32 bit case.
388 */
dln2_spi_copy_from_buf(u8 * dest,const u8 * dln2_buf,u16 len,u8 bpw)389 static int dln2_spi_copy_from_buf(u8 *dest, const u8 *dln2_buf, u16 len, u8 bpw)
390 {
391 #ifdef __LITTLE_ENDIAN
392 memcpy(dest, dln2_buf, len);
393 #else
394 if (bpw <= 8) {
395 memcpy(dest, dln2_buf, len);
396 } else if (bpw <= 16) {
397 u16 *d = (u16 *)dest;
398 __le16 *s = (__le16 *)dln2_buf;
399
400 len = len / 2;
401 while (len--)
402 *d++ = le16_to_cpup(s++);
403 } else {
404 u32 *d = (u32 *)dest;
405 __le32 *s = (__le32 *)dln2_buf;
406
407 len = len / 4;
408 while (len--)
409 *d++ = get_unaligned_le32(s++);
410 }
411 #endif
412
413 return 0;
414 }
415
416 /*
417 * Perform one write operation.
418 */
dln2_spi_write_one(struct dln2_spi * dln2,const u8 * data,u16 data_len,u8 attr)419 static int dln2_spi_write_one(struct dln2_spi *dln2, const u8 *data,
420 u16 data_len, u8 attr)
421 {
422 struct {
423 u8 port;
424 __le16 size;
425 u8 attr;
426 u8 buf[DLN2_SPI_MAX_XFER_SIZE];
427 } __packed *tx = dln2->buf;
428 unsigned tx_len;
429
430 BUILD_BUG_ON(sizeof(*tx) > DLN2_SPI_BUF_SIZE);
431
432 if (data_len > DLN2_SPI_MAX_XFER_SIZE)
433 return -EINVAL;
434
435 tx->port = dln2->port;
436 tx->size = cpu_to_le16(data_len);
437 tx->attr = attr;
438
439 dln2_spi_copy_to_buf(tx->buf, data, data_len, dln2->bpw);
440
441 tx_len = sizeof(*tx) + data_len - DLN2_SPI_MAX_XFER_SIZE;
442 return dln2_transfer_tx(dln2->pdev, DLN2_SPI_WRITE, tx, tx_len);
443 }
444
445 /*
446 * Perform one read operation.
447 */
dln2_spi_read_one(struct dln2_spi * dln2,u8 * data,u16 data_len,u8 attr)448 static int dln2_spi_read_one(struct dln2_spi *dln2, u8 *data,
449 u16 data_len, u8 attr)
450 {
451 int ret;
452 struct {
453 u8 port;
454 __le16 size;
455 u8 attr;
456 } __packed tx;
457 struct {
458 __le16 size;
459 u8 buf[DLN2_SPI_MAX_XFER_SIZE];
460 } __packed *rx = dln2->buf;
461 unsigned rx_len = sizeof(*rx);
462
463 BUILD_BUG_ON(sizeof(*rx) > DLN2_SPI_BUF_SIZE);
464
465 if (data_len > DLN2_SPI_MAX_XFER_SIZE)
466 return -EINVAL;
467
468 tx.port = dln2->port;
469 tx.size = cpu_to_le16(data_len);
470 tx.attr = attr;
471
472 ret = dln2_transfer(dln2->pdev, DLN2_SPI_READ, &tx, sizeof(tx),
473 rx, &rx_len);
474 if (ret < 0)
475 return ret;
476 if (rx_len < sizeof(rx->size) + data_len)
477 return -EPROTO;
478 if (le16_to_cpu(rx->size) != data_len)
479 return -EPROTO;
480
481 dln2_spi_copy_from_buf(data, rx->buf, data_len, dln2->bpw);
482
483 return 0;
484 }
485
486 /*
487 * Perform one write & read operation.
488 */
dln2_spi_read_write_one(struct dln2_spi * dln2,const u8 * tx_data,u8 * rx_data,u16 data_len,u8 attr)489 static int dln2_spi_read_write_one(struct dln2_spi *dln2, const u8 *tx_data,
490 u8 *rx_data, u16 data_len, u8 attr)
491 {
492 int ret;
493 struct {
494 u8 port;
495 __le16 size;
496 u8 attr;
497 u8 buf[DLN2_SPI_MAX_XFER_SIZE];
498 } __packed *tx;
499 struct {
500 __le16 size;
501 u8 buf[DLN2_SPI_MAX_XFER_SIZE];
502 } __packed *rx;
503 unsigned tx_len, rx_len;
504
505 BUILD_BUG_ON(sizeof(*tx) > DLN2_SPI_BUF_SIZE ||
506 sizeof(*rx) > DLN2_SPI_BUF_SIZE);
507
508 if (data_len > DLN2_SPI_MAX_XFER_SIZE)
509 return -EINVAL;
510
511 /*
512 * Since this is a pseudo full-duplex communication, we're perfectly
513 * safe to use the same buffer for both tx and rx. When DLN2 sends the
514 * response back, with the rx data, we don't need the tx buffer anymore.
515 */
516 tx = dln2->buf;
517 rx = dln2->buf;
518
519 tx->port = dln2->port;
520 tx->size = cpu_to_le16(data_len);
521 tx->attr = attr;
522
523 dln2_spi_copy_to_buf(tx->buf, tx_data, data_len, dln2->bpw);
524
525 tx_len = sizeof(*tx) + data_len - DLN2_SPI_MAX_XFER_SIZE;
526 rx_len = sizeof(*rx);
527
528 ret = dln2_transfer(dln2->pdev, DLN2_SPI_READ_WRITE, tx, tx_len,
529 rx, &rx_len);
530 if (ret < 0)
531 return ret;
532 if (rx_len < sizeof(rx->size) + data_len)
533 return -EPROTO;
534 if (le16_to_cpu(rx->size) != data_len)
535 return -EPROTO;
536
537 dln2_spi_copy_from_buf(rx_data, rx->buf, data_len, dln2->bpw);
538
539 return 0;
540 }
541
542 /*
543 * Read/Write wrapper. It will automatically split an operation into multiple
544 * single ones due to device buffer constraints.
545 */
dln2_spi_rdwr(struct dln2_spi * dln2,const u8 * tx_data,u8 * rx_data,u16 data_len,u8 attr)546 static int dln2_spi_rdwr(struct dln2_spi *dln2, const u8 *tx_data,
547 u8 *rx_data, u16 data_len, u8 attr)
548 {
549 int ret;
550 u16 len;
551 u8 temp_attr;
552 u16 remaining = data_len;
553 u16 offset;
554
555 do {
556 if (remaining > DLN2_SPI_MAX_XFER_SIZE) {
557 len = DLN2_SPI_MAX_XFER_SIZE;
558 temp_attr = DLN2_SPI_ATTR_LEAVE_SS_LOW;
559 } else {
560 len = remaining;
561 temp_attr = attr;
562 }
563
564 offset = data_len - remaining;
565
566 if (tx_data && rx_data) {
567 ret = dln2_spi_read_write_one(dln2,
568 tx_data + offset,
569 rx_data + offset,
570 len, temp_attr);
571 } else if (tx_data) {
572 ret = dln2_spi_write_one(dln2,
573 tx_data + offset,
574 len, temp_attr);
575 } else if (rx_data) {
576 ret = dln2_spi_read_one(dln2,
577 rx_data + offset,
578 len, temp_attr);
579 } else {
580 return -EINVAL;
581 }
582
583 if (ret < 0)
584 return ret;
585
586 remaining -= len;
587 } while (remaining);
588
589 return 0;
590 }
591
dln2_spi_prepare_message(struct spi_controller * host,struct spi_message * message)592 static int dln2_spi_prepare_message(struct spi_controller *host,
593 struct spi_message *message)
594 {
595 int ret;
596 struct dln2_spi *dln2 = spi_controller_get_devdata(host);
597 struct spi_device *spi = message->spi;
598
599 if (dln2->cs != spi_get_chipselect(spi, 0)) {
600 ret = dln2_spi_cs_set_one(dln2, spi_get_chipselect(spi, 0));
601 if (ret < 0)
602 return ret;
603
604 dln2->cs = spi_get_chipselect(spi, 0);
605 }
606
607 return 0;
608 }
609
dln2_spi_transfer_setup(struct dln2_spi * dln2,u32 speed,u8 bpw,u8 mode)610 static int dln2_spi_transfer_setup(struct dln2_spi *dln2, u32 speed,
611 u8 bpw, u8 mode)
612 {
613 int ret;
614 bool bus_setup_change;
615
616 bus_setup_change = dln2->speed != speed || dln2->mode != mode ||
617 dln2->bpw != bpw;
618
619 if (!bus_setup_change)
620 return 0;
621
622 ret = dln2_spi_enable(dln2, false);
623 if (ret < 0)
624 return ret;
625
626 if (dln2->speed != speed) {
627 ret = dln2_spi_set_speed(dln2, speed);
628 if (ret < 0)
629 return ret;
630
631 dln2->speed = speed;
632 }
633
634 if (dln2->mode != mode) {
635 ret = dln2_spi_set_mode(dln2, mode & 0x3);
636 if (ret < 0)
637 return ret;
638
639 dln2->mode = mode;
640 }
641
642 if (dln2->bpw != bpw) {
643 ret = dln2_spi_set_bpw(dln2, bpw);
644 if (ret < 0)
645 return ret;
646
647 dln2->bpw = bpw;
648 }
649
650 return dln2_spi_enable(dln2, true);
651 }
652
dln2_spi_transfer_one(struct spi_controller * host,struct spi_device * spi,struct spi_transfer * xfer)653 static int dln2_spi_transfer_one(struct spi_controller *host,
654 struct spi_device *spi,
655 struct spi_transfer *xfer)
656 {
657 struct dln2_spi *dln2 = spi_controller_get_devdata(host);
658 int status;
659 u8 attr = 0;
660
661 status = dln2_spi_transfer_setup(dln2, xfer->speed_hz,
662 xfer->bits_per_word,
663 spi->mode);
664 if (status < 0) {
665 dev_err(&dln2->pdev->dev, "Cannot setup transfer\n");
666 return status;
667 }
668
669 if (!xfer->cs_change && !spi_transfer_is_last(host, xfer))
670 attr = DLN2_SPI_ATTR_LEAVE_SS_LOW;
671
672 status = dln2_spi_rdwr(dln2, xfer->tx_buf, xfer->rx_buf,
673 xfer->len, attr);
674 if (status < 0)
675 dev_err(&dln2->pdev->dev, "write/read failed!\n");
676
677 return status;
678 }
679
dln2_spi_probe(struct platform_device * pdev)680 static int dln2_spi_probe(struct platform_device *pdev)
681 {
682 struct spi_controller *host;
683 struct dln2_spi *dln2;
684 struct dln2_platform_data *pdata = dev_get_platdata(&pdev->dev);
685 struct device *dev = &pdev->dev;
686 int ret;
687
688 host = spi_alloc_host(&pdev->dev, sizeof(*dln2));
689 if (!host)
690 return -ENOMEM;
691
692 device_set_node(&host->dev, dev_fwnode(dev));
693
694 platform_set_drvdata(pdev, host);
695
696 dln2 = spi_controller_get_devdata(host);
697
698 dln2->buf = devm_kmalloc(&pdev->dev, DLN2_SPI_BUF_SIZE, GFP_KERNEL);
699 if (!dln2->buf) {
700 ret = -ENOMEM;
701 goto exit_free_host;
702 }
703
704 dln2->host = host;
705 dln2->pdev = pdev;
706 dln2->port = pdata->port;
707 /* cs/mode can never be 0xff, so the first transfer will set them */
708 dln2->cs = 0xff;
709 dln2->mode = 0xff;
710
711 /* disable SPI module before continuing with the setup */
712 ret = dln2_spi_enable(dln2, false);
713 if (ret < 0) {
714 dev_err(&pdev->dev, "Failed to disable SPI module\n");
715 goto exit_free_host;
716 }
717
718 ret = dln2_spi_get_cs_num(dln2, &host->num_chipselect);
719 if (ret < 0) {
720 dev_err(&pdev->dev, "Failed to get number of CS pins\n");
721 goto exit_free_host;
722 }
723
724 ret = dln2_spi_get_speed_range(dln2,
725 &host->min_speed_hz,
726 &host->max_speed_hz);
727 if (ret < 0) {
728 dev_err(&pdev->dev, "Failed to read bus min/max freqs\n");
729 goto exit_free_host;
730 }
731
732 ret = dln2_spi_get_supported_frame_sizes(dln2,
733 &host->bits_per_word_mask);
734 if (ret < 0) {
735 dev_err(&pdev->dev, "Failed to read supported frame sizes\n");
736 goto exit_free_host;
737 }
738
739 ret = dln2_spi_cs_enable_all(dln2, true);
740 if (ret < 0) {
741 dev_err(&pdev->dev, "Failed to enable CS pins\n");
742 goto exit_free_host;
743 }
744
745 host->bus_num = -1;
746 host->mode_bits = SPI_CPOL | SPI_CPHA;
747 host->prepare_message = dln2_spi_prepare_message;
748 host->transfer_one = dln2_spi_transfer_one;
749 host->auto_runtime_pm = true;
750
751 /* enable SPI module, we're good to go */
752 ret = dln2_spi_enable(dln2, true);
753 if (ret < 0) {
754 dev_err(&pdev->dev, "Failed to enable SPI module\n");
755 goto exit_free_host;
756 }
757
758 pm_runtime_set_autosuspend_delay(&pdev->dev,
759 DLN2_RPM_AUTOSUSPEND_TIMEOUT);
760 pm_runtime_use_autosuspend(&pdev->dev);
761 pm_runtime_set_active(&pdev->dev);
762 pm_runtime_enable(&pdev->dev);
763
764 ret = devm_spi_register_controller(&pdev->dev, host);
765 if (ret < 0) {
766 dev_err(&pdev->dev, "Failed to register host\n");
767 goto exit_register;
768 }
769
770 return ret;
771
772 exit_register:
773 pm_runtime_disable(&pdev->dev);
774 pm_runtime_set_suspended(&pdev->dev);
775
776 if (dln2_spi_enable(dln2, false) < 0)
777 dev_err(&pdev->dev, "Failed to disable SPI module\n");
778 exit_free_host:
779 spi_controller_put(host);
780
781 return ret;
782 }
783
dln2_spi_remove(struct platform_device * pdev)784 static void dln2_spi_remove(struct platform_device *pdev)
785 {
786 struct spi_controller *host = platform_get_drvdata(pdev);
787 struct dln2_spi *dln2 = spi_controller_get_devdata(host);
788
789 pm_runtime_disable(&pdev->dev);
790
791 if (dln2_spi_enable(dln2, false) < 0)
792 dev_err(&pdev->dev, "Failed to disable SPI module\n");
793 }
794
795 #ifdef CONFIG_PM_SLEEP
dln2_spi_suspend(struct device * dev)796 static int dln2_spi_suspend(struct device *dev)
797 {
798 int ret;
799 struct spi_controller *host = dev_get_drvdata(dev);
800 struct dln2_spi *dln2 = spi_controller_get_devdata(host);
801
802 ret = spi_controller_suspend(host);
803 if (ret < 0)
804 return ret;
805
806 if (!pm_runtime_suspended(dev)) {
807 ret = dln2_spi_enable(dln2, false);
808 if (ret < 0)
809 return ret;
810 }
811
812 /*
813 * USB power may be cut off during sleep. Resetting the following
814 * parameters will force the board to be set up before first transfer.
815 */
816 dln2->cs = 0xff;
817 dln2->speed = 0;
818 dln2->bpw = 0;
819 dln2->mode = 0xff;
820
821 return 0;
822 }
823
dln2_spi_resume(struct device * dev)824 static int dln2_spi_resume(struct device *dev)
825 {
826 int ret;
827 struct spi_controller *host = dev_get_drvdata(dev);
828 struct dln2_spi *dln2 = spi_controller_get_devdata(host);
829
830 if (!pm_runtime_suspended(dev)) {
831 ret = dln2_spi_cs_enable_all(dln2, true);
832 if (ret < 0)
833 return ret;
834
835 ret = dln2_spi_enable(dln2, true);
836 if (ret < 0)
837 return ret;
838 }
839
840 return spi_controller_resume(host);
841 }
842 #endif /* CONFIG_PM_SLEEP */
843
844 #ifdef CONFIG_PM
dln2_spi_runtime_suspend(struct device * dev)845 static int dln2_spi_runtime_suspend(struct device *dev)
846 {
847 struct spi_controller *host = dev_get_drvdata(dev);
848 struct dln2_spi *dln2 = spi_controller_get_devdata(host);
849
850 return dln2_spi_enable(dln2, false);
851 }
852
dln2_spi_runtime_resume(struct device * dev)853 static int dln2_spi_runtime_resume(struct device *dev)
854 {
855 struct spi_controller *host = dev_get_drvdata(dev);
856 struct dln2_spi *dln2 = spi_controller_get_devdata(host);
857
858 return dln2_spi_enable(dln2, true);
859 }
860 #endif /* CONFIG_PM */
861
862 static const struct dev_pm_ops dln2_spi_pm = {
863 SET_SYSTEM_SLEEP_PM_OPS(dln2_spi_suspend, dln2_spi_resume)
864 SET_RUNTIME_PM_OPS(dln2_spi_runtime_suspend,
865 dln2_spi_runtime_resume, NULL)
866 };
867
868 static struct platform_driver spi_dln2_driver = {
869 .driver = {
870 .name = "dln2-spi",
871 .pm = &dln2_spi_pm,
872 },
873 .probe = dln2_spi_probe,
874 .remove_new = dln2_spi_remove,
875 };
876 module_platform_driver(spi_dln2_driver);
877
878 MODULE_DESCRIPTION("Driver for the Diolan DLN2 SPI host interface");
879 MODULE_AUTHOR("Laurentiu Palcu <laurentiu.palcu@intel.com>");
880 MODULE_LICENSE("GPL v2");
881 MODULE_ALIAS("platform:dln2-spi");
882