1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Core Source for:
4 * Cypress TrueTouch(TM) Standard Product (TTSP) touchscreen drivers.
5 * For use with Cypress Txx3xx parts.
6 * Supported parts include:
7 * CY8CTST341
8 * CY8CTMA340
9 *
10 * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
11 * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
12 *
13 * Contact Cypress Semiconductor at www.cypress.com <kev@cypress.com>
14 */
15
16 #include <linux/delay.h>
17 #include <linux/input.h>
18 #include <linux/input/mt.h>
19 #include <linux/input/touchscreen.h>
20 #include <linux/interrupt.h>
21 #include <linux/slab.h>
22 #include <linux/property.h>
23 #include <linux/gpio/consumer.h>
24 #include <linux/regulator/consumer.h>
25
26 #include "cyttsp_core.h"
27
28 /* Bootloader number of command keys */
29 #define CY_NUM_BL_KEYS 8
30
31 /* helpers */
32 #define GET_NUM_TOUCHES(x) ((x) & 0x0F)
33 #define IS_LARGE_AREA(x) (((x) & 0x10) >> 4)
34 #define IS_BAD_PKT(x) ((x) & 0x20)
35 #define IS_VALID_APP(x) ((x) & 0x01)
36 #define IS_OPERATIONAL_ERR(x) ((x) & 0x3F)
37 #define GET_HSTMODE(reg) (((reg) & 0x70) >> 4)
38 #define GET_BOOTLOADERMODE(reg) (((reg) & 0x10) >> 4)
39
40 #define CY_REG_BASE 0x00
41 #define CY_REG_ACT_DIST 0x1E
42 #define CY_REG_ACT_INTRVL 0x1D
43 #define CY_REG_TCH_TMOUT (CY_REG_ACT_INTRVL + 1)
44 #define CY_REG_LP_INTRVL (CY_REG_TCH_TMOUT + 1)
45 #define CY_MAXZ 255
46 #define CY_DELAY_DFLT 20 /* ms */
47 #define CY_DELAY_MAX 500
48 /* Active distance in pixels for a gesture to be reported */
49 #define CY_ACT_DIST_DFLT 0xF8 /* pixels */
50 #define CY_ACT_DIST_MASK 0x0F
51 /* Active Power state scanning/processing refresh interval */
52 #define CY_ACT_INTRVL_DFLT 0x00 /* ms */
53 /* Low Power state scanning/processing refresh interval */
54 #define CY_LP_INTRVL_DFLT 0x0A /* ms */
55 /* touch timeout for the Active power */
56 #define CY_TCH_TMOUT_DFLT 0xFF /* ms */
57 #define CY_HNDSHK_BIT 0x80
58 /* device mode bits */
59 #define CY_OPERATE_MODE 0x00
60 #define CY_SYSINFO_MODE 0x10
61 /* power mode select bits */
62 #define CY_SOFT_RESET_MODE 0x01 /* return to Bootloader mode */
63 #define CY_DEEP_SLEEP_MODE 0x02
64 #define CY_LOW_POWER_MODE 0x04
65
66 /* Slots management */
67 #define CY_MAX_FINGER 4
68 #define CY_MAX_ID 16
69
70 static const u8 bl_command[] = {
71 0x00, /* file offset */
72 0xFF, /* command */
73 0xA5, /* exit bootloader command */
74 0, 1, 2, 3, 4, 5, 6, 7 /* default keys */
75 };
76
ttsp_read_block_data(struct cyttsp * ts,u8 command,u8 length,void * buf)77 static int ttsp_read_block_data(struct cyttsp *ts, u8 command,
78 u8 length, void *buf)
79 {
80 int error;
81 int tries;
82
83 for (tries = 0; tries < CY_NUM_RETRY; tries++) {
84 error = ts->bus_ops->read(ts->dev, ts->xfer_buf, command,
85 length, buf);
86 if (!error)
87 return 0;
88
89 msleep(CY_DELAY_DFLT);
90 }
91
92 return -EIO;
93 }
94
ttsp_write_block_data(struct cyttsp * ts,u8 command,u8 length,void * buf)95 static int ttsp_write_block_data(struct cyttsp *ts, u8 command,
96 u8 length, void *buf)
97 {
98 int error;
99 int tries;
100
101 for (tries = 0; tries < CY_NUM_RETRY; tries++) {
102 error = ts->bus_ops->write(ts->dev, ts->xfer_buf, command,
103 length, buf);
104 if (!error)
105 return 0;
106
107 msleep(CY_DELAY_DFLT);
108 }
109
110 return -EIO;
111 }
112
ttsp_send_command(struct cyttsp * ts,u8 cmd)113 static int ttsp_send_command(struct cyttsp *ts, u8 cmd)
114 {
115 return ttsp_write_block_data(ts, CY_REG_BASE, sizeof(cmd), &cmd);
116 }
117
cyttsp_handshake(struct cyttsp * ts)118 static int cyttsp_handshake(struct cyttsp *ts)
119 {
120 if (ts->use_hndshk)
121 return ttsp_send_command(ts,
122 ts->xy_data.hst_mode ^ CY_HNDSHK_BIT);
123
124 return 0;
125 }
126
cyttsp_load_bl_regs(struct cyttsp * ts)127 static int cyttsp_load_bl_regs(struct cyttsp *ts)
128 {
129 memset(&ts->bl_data, 0, sizeof(ts->bl_data));
130 ts->bl_data.bl_status = 0x10;
131
132 return ttsp_read_block_data(ts, CY_REG_BASE,
133 sizeof(ts->bl_data), &ts->bl_data);
134 }
135
cyttsp_exit_bl_mode(struct cyttsp * ts)136 static int cyttsp_exit_bl_mode(struct cyttsp *ts)
137 {
138 int error;
139 u8 bl_cmd[sizeof(bl_command)];
140
141 memcpy(bl_cmd, bl_command, sizeof(bl_command));
142 if (ts->bl_keys)
143 memcpy(&bl_cmd[sizeof(bl_command) - CY_NUM_BL_KEYS],
144 ts->bl_keys, CY_NUM_BL_KEYS);
145
146 error = ttsp_write_block_data(ts, CY_REG_BASE,
147 sizeof(bl_cmd), bl_cmd);
148 if (error)
149 return error;
150
151 /* wait for TTSP Device to complete the operation */
152 msleep(CY_DELAY_DFLT);
153
154 error = cyttsp_load_bl_regs(ts);
155 if (error)
156 return error;
157
158 if (GET_BOOTLOADERMODE(ts->bl_data.bl_status))
159 return -EIO;
160
161 return 0;
162 }
163
cyttsp_set_operational_mode(struct cyttsp * ts)164 static int cyttsp_set_operational_mode(struct cyttsp *ts)
165 {
166 int error;
167
168 error = ttsp_send_command(ts, CY_OPERATE_MODE);
169 if (error)
170 return error;
171
172 /* wait for TTSP Device to complete switch to Operational mode */
173 error = ttsp_read_block_data(ts, CY_REG_BASE,
174 sizeof(ts->xy_data), &ts->xy_data);
175 if (error)
176 return error;
177
178 error = cyttsp_handshake(ts);
179 if (error)
180 return error;
181
182 return ts->xy_data.act_dist == CY_ACT_DIST_DFLT ? -EIO : 0;
183 }
184
cyttsp_set_sysinfo_mode(struct cyttsp * ts)185 static int cyttsp_set_sysinfo_mode(struct cyttsp *ts)
186 {
187 int error;
188
189 memset(&ts->sysinfo_data, 0, sizeof(ts->sysinfo_data));
190
191 /* switch to sysinfo mode */
192 error = ttsp_send_command(ts, CY_SYSINFO_MODE);
193 if (error)
194 return error;
195
196 /* read sysinfo registers */
197 msleep(CY_DELAY_DFLT);
198 error = ttsp_read_block_data(ts, CY_REG_BASE, sizeof(ts->sysinfo_data),
199 &ts->sysinfo_data);
200 if (error)
201 return error;
202
203 error = cyttsp_handshake(ts);
204 if (error)
205 return error;
206
207 if (!ts->sysinfo_data.tts_verh && !ts->sysinfo_data.tts_verl)
208 return -EIO;
209
210 return 0;
211 }
212
cyttsp_set_sysinfo_regs(struct cyttsp * ts)213 static int cyttsp_set_sysinfo_regs(struct cyttsp *ts)
214 {
215 int retval = 0;
216
217 if (ts->act_intrvl != CY_ACT_INTRVL_DFLT ||
218 ts->tch_tmout != CY_TCH_TMOUT_DFLT ||
219 ts->lp_intrvl != CY_LP_INTRVL_DFLT) {
220
221 u8 intrvl_ray[] = {
222 ts->act_intrvl,
223 ts->tch_tmout,
224 ts->lp_intrvl
225 };
226
227 /* set intrvl registers */
228 retval = ttsp_write_block_data(ts, CY_REG_ACT_INTRVL,
229 sizeof(intrvl_ray), intrvl_ray);
230 msleep(CY_DELAY_DFLT);
231 }
232
233 return retval;
234 }
235
cyttsp_hard_reset(struct cyttsp * ts)236 static void cyttsp_hard_reset(struct cyttsp *ts)
237 {
238 if (ts->reset_gpio) {
239 /*
240 * According to the CY8CTMA340 datasheet page 21, the external
241 * reset pulse width should be >= 1 ms. The datasheet does not
242 * specify how long we have to wait after reset but a vendor
243 * tree specifies 5 ms here.
244 */
245 gpiod_set_value_cansleep(ts->reset_gpio, 1);
246 usleep_range(1000, 2000);
247 gpiod_set_value_cansleep(ts->reset_gpio, 0);
248 usleep_range(5000, 6000);
249 }
250 }
251
cyttsp_soft_reset(struct cyttsp * ts)252 static int cyttsp_soft_reset(struct cyttsp *ts)
253 {
254 int retval;
255
256 /* wait for interrupt to set ready completion */
257 reinit_completion(&ts->bl_ready);
258 ts->state = CY_BL_STATE;
259
260 enable_irq(ts->irq);
261
262 retval = ttsp_send_command(ts, CY_SOFT_RESET_MODE);
263 if (retval) {
264 dev_err(ts->dev, "failed to send soft reset\n");
265 goto out;
266 }
267
268 if (!wait_for_completion_timeout(&ts->bl_ready,
269 msecs_to_jiffies(CY_DELAY_DFLT * CY_DELAY_MAX))) {
270 dev_err(ts->dev, "timeout waiting for soft reset\n");
271 retval = -EIO;
272 }
273
274 out:
275 ts->state = CY_IDLE_STATE;
276 disable_irq(ts->irq);
277 return retval;
278 }
279
cyttsp_act_dist_setup(struct cyttsp * ts)280 static int cyttsp_act_dist_setup(struct cyttsp *ts)
281 {
282 u8 act_dist_setup = ts->act_dist;
283
284 /* Init gesture; active distance setup */
285 return ttsp_write_block_data(ts, CY_REG_ACT_DIST,
286 sizeof(act_dist_setup), &act_dist_setup);
287 }
288
cyttsp_extract_track_ids(struct cyttsp_xydata * xy_data,int * ids)289 static void cyttsp_extract_track_ids(struct cyttsp_xydata *xy_data, int *ids)
290 {
291 ids[0] = xy_data->touch12_id >> 4;
292 ids[1] = xy_data->touch12_id & 0xF;
293 ids[2] = xy_data->touch34_id >> 4;
294 ids[3] = xy_data->touch34_id & 0xF;
295 }
296
cyttsp_get_tch(struct cyttsp_xydata * xy_data,int idx)297 static const struct cyttsp_tch *cyttsp_get_tch(struct cyttsp_xydata *xy_data,
298 int idx)
299 {
300 switch (idx) {
301 case 0:
302 return &xy_data->tch1;
303 case 1:
304 return &xy_data->tch2;
305 case 2:
306 return &xy_data->tch3;
307 case 3:
308 return &xy_data->tch4;
309 default:
310 return NULL;
311 }
312 }
313
cyttsp_report_tchdata(struct cyttsp * ts)314 static void cyttsp_report_tchdata(struct cyttsp *ts)
315 {
316 struct cyttsp_xydata *xy_data = &ts->xy_data;
317 struct input_dev *input = ts->input;
318 int num_tch = GET_NUM_TOUCHES(xy_data->tt_stat);
319 const struct cyttsp_tch *tch;
320 int ids[CY_MAX_ID];
321 int i;
322 DECLARE_BITMAP(used, CY_MAX_ID);
323
324 if (IS_LARGE_AREA(xy_data->tt_stat) == 1) {
325 /* terminate all active tracks */
326 num_tch = 0;
327 dev_dbg(ts->dev, "%s: Large area detected\n", __func__);
328 } else if (num_tch > CY_MAX_FINGER) {
329 /* terminate all active tracks */
330 num_tch = 0;
331 dev_dbg(ts->dev, "%s: Num touch error detected\n", __func__);
332 } else if (IS_BAD_PKT(xy_data->tt_mode)) {
333 /* terminate all active tracks */
334 num_tch = 0;
335 dev_dbg(ts->dev, "%s: Invalid buffer detected\n", __func__);
336 }
337
338 cyttsp_extract_track_ids(xy_data, ids);
339
340 bitmap_zero(used, CY_MAX_ID);
341
342 for (i = 0; i < num_tch; i++) {
343 tch = cyttsp_get_tch(xy_data, i);
344
345 input_mt_slot(input, ids[i]);
346 input_mt_report_slot_state(input, MT_TOOL_FINGER, true);
347 input_report_abs(input, ABS_MT_POSITION_X, be16_to_cpu(tch->x));
348 input_report_abs(input, ABS_MT_POSITION_Y, be16_to_cpu(tch->y));
349 input_report_abs(input, ABS_MT_TOUCH_MAJOR, tch->z);
350
351 __set_bit(ids[i], used);
352 }
353
354 for (i = 0; i < CY_MAX_ID; i++) {
355 if (test_bit(i, used))
356 continue;
357
358 input_mt_slot(input, i);
359 input_mt_report_slot_inactive(input);
360 }
361
362 input_sync(input);
363 }
364
cyttsp_irq(int irq,void * handle)365 static irqreturn_t cyttsp_irq(int irq, void *handle)
366 {
367 struct cyttsp *ts = handle;
368 int error;
369
370 if (unlikely(ts->state == CY_BL_STATE)) {
371 complete(&ts->bl_ready);
372 goto out;
373 }
374
375 /* Get touch data from CYTTSP device */
376 error = ttsp_read_block_data(ts, CY_REG_BASE,
377 sizeof(struct cyttsp_xydata), &ts->xy_data);
378 if (error)
379 goto out;
380
381 /* provide flow control handshake */
382 error = cyttsp_handshake(ts);
383 if (error)
384 goto out;
385
386 if (unlikely(ts->state == CY_IDLE_STATE))
387 goto out;
388
389 if (GET_BOOTLOADERMODE(ts->xy_data.tt_mode)) {
390 /*
391 * TTSP device has reset back to bootloader mode.
392 * Restore to operational mode.
393 */
394 error = cyttsp_exit_bl_mode(ts);
395 if (error) {
396 dev_err(ts->dev,
397 "Could not return to operational mode, err: %d\n",
398 error);
399 ts->state = CY_IDLE_STATE;
400 }
401 } else {
402 cyttsp_report_tchdata(ts);
403 }
404
405 out:
406 return IRQ_HANDLED;
407 }
408
cyttsp_power_on(struct cyttsp * ts)409 static int cyttsp_power_on(struct cyttsp *ts)
410 {
411 int error;
412
413 error = cyttsp_soft_reset(ts);
414 if (error)
415 return error;
416
417 error = cyttsp_load_bl_regs(ts);
418 if (error)
419 return error;
420
421 if (GET_BOOTLOADERMODE(ts->bl_data.bl_status) &&
422 IS_VALID_APP(ts->bl_data.bl_status)) {
423 error = cyttsp_exit_bl_mode(ts);
424 if (error) {
425 dev_err(ts->dev, "failed to exit bootloader mode\n");
426 return error;
427 }
428 }
429
430 if (GET_HSTMODE(ts->bl_data.bl_file) != CY_OPERATE_MODE ||
431 IS_OPERATIONAL_ERR(ts->bl_data.bl_status)) {
432 return -ENODEV;
433 }
434
435 error = cyttsp_set_sysinfo_mode(ts);
436 if (error)
437 return error;
438
439 error = cyttsp_set_sysinfo_regs(ts);
440 if (error)
441 return error;
442
443 error = cyttsp_set_operational_mode(ts);
444 if (error)
445 return error;
446
447 /* init active distance */
448 error = cyttsp_act_dist_setup(ts);
449 if (error)
450 return error;
451
452 ts->state = CY_ACTIVE_STATE;
453
454 return 0;
455 }
456
cyttsp_enable(struct cyttsp * ts)457 static int cyttsp_enable(struct cyttsp *ts)
458 {
459 int error;
460
461 /*
462 * The device firmware can wake on an I2C or SPI memory slave
463 * address match. So just reading a register is sufficient to
464 * wake up the device. The first read attempt will fail but it
465 * will wake it up making the second read attempt successful.
466 */
467 error = ttsp_read_block_data(ts, CY_REG_BASE,
468 sizeof(ts->xy_data), &ts->xy_data);
469 if (error)
470 return error;
471
472 if (GET_HSTMODE(ts->xy_data.hst_mode))
473 return -EIO;
474
475 enable_irq(ts->irq);
476
477 return 0;
478 }
479
cyttsp_disable(struct cyttsp * ts)480 static int cyttsp_disable(struct cyttsp *ts)
481 {
482 int error;
483
484 error = ttsp_send_command(ts, CY_LOW_POWER_MODE);
485 if (error)
486 return error;
487
488 disable_irq(ts->irq);
489
490 return 0;
491 }
492
cyttsp_suspend(struct device * dev)493 static int cyttsp_suspend(struct device *dev)
494 {
495 struct cyttsp *ts = dev_get_drvdata(dev);
496 int retval = 0;
497
498 mutex_lock(&ts->input->mutex);
499
500 if (input_device_enabled(ts->input)) {
501 retval = cyttsp_disable(ts);
502 if (retval == 0)
503 ts->suspended = true;
504 }
505
506 mutex_unlock(&ts->input->mutex);
507
508 return retval;
509 }
510
cyttsp_resume(struct device * dev)511 static int cyttsp_resume(struct device *dev)
512 {
513 struct cyttsp *ts = dev_get_drvdata(dev);
514
515 mutex_lock(&ts->input->mutex);
516
517 if (input_device_enabled(ts->input))
518 cyttsp_enable(ts);
519
520 ts->suspended = false;
521
522 mutex_unlock(&ts->input->mutex);
523
524 return 0;
525 }
526
527 EXPORT_GPL_SIMPLE_DEV_PM_OPS(cyttsp_pm_ops, cyttsp_suspend, cyttsp_resume);
528
cyttsp_open(struct input_dev * dev)529 static int cyttsp_open(struct input_dev *dev)
530 {
531 struct cyttsp *ts = input_get_drvdata(dev);
532 int retval = 0;
533
534 if (!ts->suspended)
535 retval = cyttsp_enable(ts);
536
537 return retval;
538 }
539
cyttsp_close(struct input_dev * dev)540 static void cyttsp_close(struct input_dev *dev)
541 {
542 struct cyttsp *ts = input_get_drvdata(dev);
543
544 if (!ts->suspended)
545 cyttsp_disable(ts);
546 }
547
cyttsp_parse_properties(struct cyttsp * ts)548 static int cyttsp_parse_properties(struct cyttsp *ts)
549 {
550 struct device *dev = ts->dev;
551 u32 dt_value;
552 int ret;
553
554 ts->bl_keys = devm_kzalloc(dev, CY_NUM_BL_KEYS, GFP_KERNEL);
555 if (!ts->bl_keys)
556 return -ENOMEM;
557
558 /* Set some default values */
559 ts->use_hndshk = false;
560 ts->act_dist = CY_ACT_DIST_DFLT;
561 ts->act_intrvl = CY_ACT_INTRVL_DFLT;
562 ts->tch_tmout = CY_TCH_TMOUT_DFLT;
563 ts->lp_intrvl = CY_LP_INTRVL_DFLT;
564
565 ret = device_property_read_u8_array(dev, "bootloader-key",
566 ts->bl_keys, CY_NUM_BL_KEYS);
567 if (ret) {
568 dev_err(dev,
569 "bootloader-key property could not be retrieved\n");
570 return ret;
571 }
572
573 ts->use_hndshk = device_property_present(dev, "use-handshake");
574
575 if (!device_property_read_u32(dev, "active-distance", &dt_value)) {
576 if (dt_value > 15) {
577 dev_err(dev, "active-distance (%u) must be [0-15]\n",
578 dt_value);
579 return -EINVAL;
580 }
581 ts->act_dist &= ~CY_ACT_DIST_MASK;
582 ts->act_dist |= dt_value;
583 }
584
585 if (!device_property_read_u32(dev, "active-interval-ms", &dt_value)) {
586 if (dt_value > 255) {
587 dev_err(dev, "active-interval-ms (%u) must be [0-255]\n",
588 dt_value);
589 return -EINVAL;
590 }
591 ts->act_intrvl = dt_value;
592 }
593
594 if (!device_property_read_u32(dev, "lowpower-interval-ms", &dt_value)) {
595 if (dt_value > 2550) {
596 dev_err(dev, "lowpower-interval-ms (%u) must be [0-2550]\n",
597 dt_value);
598 return -EINVAL;
599 }
600 /* Register value is expressed in 0.01s / bit */
601 ts->lp_intrvl = dt_value / 10;
602 }
603
604 if (!device_property_read_u32(dev, "touch-timeout-ms", &dt_value)) {
605 if (dt_value > 2550) {
606 dev_err(dev, "touch-timeout-ms (%u) must be [0-2550]\n",
607 dt_value);
608 return -EINVAL;
609 }
610 /* Register value is expressed in 0.01s / bit */
611 ts->tch_tmout = dt_value / 10;
612 }
613
614 return 0;
615 }
616
cyttsp_probe(const struct cyttsp_bus_ops * bus_ops,struct device * dev,int irq,size_t xfer_buf_size)617 struct cyttsp *cyttsp_probe(const struct cyttsp_bus_ops *bus_ops,
618 struct device *dev, int irq, size_t xfer_buf_size)
619 {
620 /*
621 * VCPIN is the analog voltage supply
622 * VDD is the digital voltage supply
623 */
624 static const char * const supplies[] = { "vcpin", "vdd" };
625 struct cyttsp *ts;
626 struct input_dev *input_dev;
627 int error;
628
629 ts = devm_kzalloc(dev, sizeof(*ts) + xfer_buf_size, GFP_KERNEL);
630 if (!ts)
631 return ERR_PTR(-ENOMEM);
632
633 input_dev = devm_input_allocate_device(dev);
634 if (!input_dev)
635 return ERR_PTR(-ENOMEM);
636
637 ts->dev = dev;
638 ts->input = input_dev;
639 ts->bus_ops = bus_ops;
640 ts->irq = irq;
641
642 error = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(supplies),
643 supplies);
644 if (error) {
645 dev_err(dev, "Failed to enable regulators: %d\n", error);
646 return ERR_PTR(error);
647 }
648
649 ts->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
650 if (IS_ERR(ts->reset_gpio)) {
651 error = PTR_ERR(ts->reset_gpio);
652 dev_err(dev, "Failed to request reset gpio, error %d\n", error);
653 return ERR_PTR(error);
654 }
655
656 error = cyttsp_parse_properties(ts);
657 if (error)
658 return ERR_PTR(error);
659
660 init_completion(&ts->bl_ready);
661
662 input_dev->name = "Cypress TTSP TouchScreen";
663 input_dev->id.bustype = bus_ops->bustype;
664 input_dev->dev.parent = ts->dev;
665
666 input_dev->open = cyttsp_open;
667 input_dev->close = cyttsp_close;
668
669 input_set_drvdata(input_dev, ts);
670
671 input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_X);
672 input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_Y);
673 /* One byte for width 0..255 so this is the limit */
674 input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
675
676 touchscreen_parse_properties(input_dev, true, NULL);
677
678 error = input_mt_init_slots(input_dev, CY_MAX_ID, INPUT_MT_DIRECT);
679 if (error) {
680 dev_err(dev, "Unable to init MT slots.\n");
681 return ERR_PTR(error);
682 }
683
684 error = devm_request_threaded_irq(dev, ts->irq, NULL, cyttsp_irq,
685 IRQF_ONESHOT | IRQF_NO_AUTOEN,
686 "cyttsp", ts);
687 if (error) {
688 dev_err(ts->dev, "failed to request IRQ %d, err: %d\n",
689 ts->irq, error);
690 return ERR_PTR(error);
691 }
692
693 cyttsp_hard_reset(ts);
694
695 error = cyttsp_power_on(ts);
696 if (error)
697 return ERR_PTR(error);
698
699 error = input_register_device(input_dev);
700 if (error) {
701 dev_err(ts->dev, "failed to register input device: %d\n",
702 error);
703 return ERR_PTR(error);
704 }
705
706 return ts;
707 }
708 EXPORT_SYMBOL_GPL(cyttsp_probe);
709
710 MODULE_LICENSE("GPL");
711 MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard touchscreen driver core");
712 MODULE_AUTHOR("Cypress");
713