1/* SPDX-License-Identifier: GPL-2.0-only */ 2/* 3 * linux/arch/arm/mach-omap1/ams-delta-fiq-handler.S 4 * 5 * Based on linux/arch/arm/lib/floppydma.S 6 * Renamed and modified to work with 2.6 kernel by Matt Callow 7 * Copyright (C) 1995, 1996 Russell King 8 * Copyright (C) 2004 Pete Trapps 9 * Copyright (C) 2006 Matt Callow 10 * Copyright (C) 2010 Janusz Krzysztofik 11 */ 12 13#include <linux/linkage.h> 14#include <linux/platform_data/ams-delta-fiq.h> 15#include <linux/platform_data/gpio-omap.h> 16#include <linux/soc/ti/omap1-io.h> 17 18#include <asm/assembler.h> 19#include <asm/irq.h> 20 21#include "hardware.h" 22#include "ams-delta-fiq.h" 23#include "board-ams-delta.h" 24#include "iomap.h" 25 26/* 27 * OMAP1510 GPIO related symbol copied from arch/arm/mach-omap1/gpio15xx.c. 28 * Unfortunately, it was not placed in a separate header file. 29 */ 30#define OMAP1510_GPIO_BASE 0xFFFCE000 31 32/* GPIO register bitmasks */ 33#define KEYBRD_DATA_MASK (0x1 << AMS_DELTA_GPIO_PIN_KEYBRD_DATA) 34#define KEYBRD_CLK_MASK (0x1 << AMS_DELTA_GPIO_PIN_KEYBRD_CLK) 35#define MODEM_IRQ_MASK (0x1 << AMS_DELTA_GPIO_PIN_MODEM_IRQ) 36#define HOOK_SWITCH_MASK (0x1 << AMS_DELTA_GPIO_PIN_HOOK_SWITCH) 37#define OTHERS_MASK (MODEM_IRQ_MASK | HOOK_SWITCH_MASK) 38 39/* IRQ handler register bitmasks */ 40#define DEFERRED_FIQ_MASK OMAP_IRQ_BIT(INT_DEFERRED_FIQ) 41#define GPIO_BANK1_MASK OMAP_IRQ_BIT(INT_GPIO_BANK1) 42 43/* Driver buffer byte offsets */ 44#define BUF_MASK (FIQ_MASK * 4) 45#define BUF_STATE (FIQ_STATE * 4) 46#define BUF_KEYS_CNT (FIQ_KEYS_CNT * 4) 47#define BUF_TAIL_OFFSET (FIQ_TAIL_OFFSET * 4) 48#define BUF_HEAD_OFFSET (FIQ_HEAD_OFFSET * 4) 49#define BUF_BUF_LEN (FIQ_BUF_LEN * 4) 50#define BUF_KEY (FIQ_KEY * 4) 51#define BUF_MISSED_KEYS (FIQ_MISSED_KEYS * 4) 52#define BUF_BUFFER_START (FIQ_BUFFER_START * 4) 53#define BUF_GPIO_INT_MASK (FIQ_GPIO_INT_MASK * 4) 54#define BUF_KEYS_HICNT (FIQ_KEYS_HICNT * 4) 55#define BUF_IRQ_PEND (FIQ_IRQ_PEND * 4) 56#define BUF_SIR_CODE_L1 (FIQ_SIR_CODE_L1 * 4) 57#define BUF_SIR_CODE_L2 (IRQ_SIR_CODE_L2 * 4) 58#define BUF_CNT_INT_00 (FIQ_CNT_INT_00 * 4) 59#define BUF_CNT_INT_KEY (FIQ_CNT_INT_KEY * 4) 60#define BUF_CNT_INT_MDM (FIQ_CNT_INT_MDM * 4) 61#define BUF_CNT_INT_03 (FIQ_CNT_INT_03 * 4) 62#define BUF_CNT_INT_HSW (FIQ_CNT_INT_HSW * 4) 63#define BUF_CNT_INT_05 (FIQ_CNT_INT_05 * 4) 64#define BUF_CNT_INT_06 (FIQ_CNT_INT_06 * 4) 65#define BUF_CNT_INT_07 (FIQ_CNT_INT_07 * 4) 66#define BUF_CNT_INT_08 (FIQ_CNT_INT_08 * 4) 67#define BUF_CNT_INT_09 (FIQ_CNT_INT_09 * 4) 68#define BUF_CNT_INT_10 (FIQ_CNT_INT_10 * 4) 69#define BUF_CNT_INT_11 (FIQ_CNT_INT_11 * 4) 70#define BUF_CNT_INT_12 (FIQ_CNT_INT_12 * 4) 71#define BUF_CNT_INT_13 (FIQ_CNT_INT_13 * 4) 72#define BUF_CNT_INT_14 (FIQ_CNT_INT_14 * 4) 73#define BUF_CNT_INT_15 (FIQ_CNT_INT_15 * 4) 74#define BUF_CIRC_BUFF (FIQ_CIRC_BUFF * 4) 75 76 77/* 78 * Register usage 79 * r8 - temporary 80 * r9 - the driver buffer 81 * r10 - temporary 82 * r11 - interrupts mask 83 * r12 - base pointers 84 * r13 - interrupts status 85 */ 86 87 .text 88 89 .global qwerty_fiqin_end 90 91ENTRY(qwerty_fiqin_start) 92 @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ 93 @ FIQ intrrupt handler 94 ldr r12, omap_ih1_base @ set pointer to level1 handler 95 96 ldr r11, [r12, #IRQ_MIR_REG_OFFSET] @ fetch interrupts mask 97 98 ldr r13, [r12, #IRQ_ITR_REG_OFFSET] @ fetch interrupts status 99 bics r13, r13, r11 @ clear masked - any left? 100 beq exit @ none - spurious FIQ? exit 101 102 ldr r10, [r12, #IRQ_SIR_FIQ_REG_OFFSET] @ get requested interrupt number 103 104 mov r8, #2 @ reset FIQ agreement 105 str r8, [r12, #IRQ_CONTROL_REG_OFFSET] 106 107 cmp r10, #(INT_GPIO_BANK1 - NR_IRQS_LEGACY) @ is it GPIO interrupt? 108 beq gpio @ yes - process it 109 110 mov r8, #1 111 orr r8, r11, r8, lsl r10 @ mask spurious interrupt 112 str r8, [r12, #IRQ_MIR_REG_OFFSET] 113exit: 114 subs pc, lr, #4 @ return from FIQ 115 @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ 116 117 118 @@@@@@@@@@@@@@@@@@@@@@@@@@@ 119gpio: @ GPIO bank interrupt handler 120 ldr r12, omap1510_gpio_base @ set base pointer to GPIO bank 121 122 ldr r11, [r12, #OMAP1510_GPIO_INT_MASK] @ fetch GPIO interrupts mask 123restart: 124 ldr r13, [r12, #OMAP1510_GPIO_INT_STATUS] @ fetch status bits 125 bics r13, r13, r11 @ clear masked - any left? 126 beq exit @ no - spurious interrupt? exit 127 128 orr r11, r11, r13 @ mask all requested interrupts 129 str r11, [r12, #OMAP1510_GPIO_INT_MASK] 130 131 str r13, [r12, #OMAP1510_GPIO_INT_STATUS] @ ack all requested interrupts 132 133 ands r10, r13, #KEYBRD_CLK_MASK @ extract keyboard status - set? 134 beq hksw @ no - try next source 135 136 137 @@@@@@@@@@@@@@@@@@@@@@ 138 @ Keyboard clock FIQ mode interrupt handler 139 @ r10 now contains KEYBRD_CLK_MASK, use it 140 bic r11, r11, r10 @ unmask it 141 str r11, [r12, #OMAP1510_GPIO_INT_MASK] 142 143 @ Process keyboard data 144 ldr r8, [r12, #OMAP1510_GPIO_DATA_INPUT] @ fetch GPIO input 145 146 ldr r10, [r9, #BUF_STATE] @ fetch kbd interface state 147 cmp r10, #0 @ are we expecting start bit? 148 bne data @ no - go to data processing 149 150 ands r8, r8, #KEYBRD_DATA_MASK @ check start bit - detected? 151 beq hksw @ no - try next source 152 153 @ r8 contains KEYBRD_DATA_MASK, use it 154 str r8, [r9, #BUF_STATE] @ enter data processing state 155 @ r10 already contains 0, reuse it 156 str r10, [r9, #BUF_KEY] @ clear keycode 157 mov r10, #2 @ reset input bit mask 158 str r10, [r9, #BUF_MASK] 159 160 @ Mask other GPIO line interrupts till key done 161 str r11, [r9, #BUF_GPIO_INT_MASK] @ save mask for later restore 162 mvn r11, #KEYBRD_CLK_MASK @ prepare all except kbd mask 163 str r11, [r12, #OMAP1510_GPIO_INT_MASK] @ store into the mask register 164 165 b restart @ restart 166 167data: ldr r10, [r9, #BUF_MASK] @ fetch current input bit mask 168 169 @ r8 still contains GPIO input bits 170 ands r8, r8, #KEYBRD_DATA_MASK @ is keyboard data line low? 171 ldreq r8, [r9, #BUF_KEY] @ yes - fetch collected so far, 172 orreq r8, r8, r10 @ set 1 at current mask position 173 streq r8, [r9, #BUF_KEY] @ and save back 174 175 mov r10, r10, lsl #1 @ shift mask left 176 bics r10, r10, #0x800 @ have we got all the bits? 177 strne r10, [r9, #BUF_MASK] @ not yet - store the mask 178 bne restart @ and restart 179 180 @ r10 already contains 0, reuse it 181 str r10, [r9, #BUF_STATE] @ reset state to start 182 183 @ Key done - restore interrupt mask 184 ldr r10, [r9, #BUF_GPIO_INT_MASK] @ fetch saved mask 185 and r11, r11, r10 @ unmask all saved as unmasked 186 str r11, [r12, #OMAP1510_GPIO_INT_MASK] @ restore into the mask register 187 188 @ Try appending the keycode to the circular buffer 189 ldr r10, [r9, #BUF_KEYS_CNT] @ get saved keystrokes count 190 ldr r8, [r9, #BUF_BUF_LEN] @ get buffer size 191 cmp r10, r8 @ is buffer full? 192 beq hksw @ yes - key lost, next source 193 194 add r10, r10, #1 @ incremet keystrokes counter 195 str r10, [r9, #BUF_KEYS_CNT] 196 197 ldr r10, [r9, #BUF_TAIL_OFFSET] @ get buffer tail offset 198 @ r8 already contains buffer size 199 cmp r10, r8 @ end of buffer? 200 moveq r10, #0 @ yes - rewind to buffer start 201 202 ldr r12, [r9, #BUF_BUFFER_START] @ get buffer start address 203 add r12, r12, r10, LSL #2 @ calculate buffer tail address 204 ldr r8, [r9, #BUF_KEY] @ get last keycode 205 str r8, [r12] @ append it to the buffer tail 206 207 add r10, r10, #1 @ increment buffer tail offset 208 str r10, [r9, #BUF_TAIL_OFFSET] 209 210 ldr r10, [r9, #BUF_CNT_INT_KEY] @ increment interrupts counter 211 add r10, r10, #1 212 str r10, [r9, #BUF_CNT_INT_KEY] 213 @@@@@@@@@@@@@@@@@@@@@@@@ 214 215 216hksw: @Is hook switch interrupt requested? 217 tst r13, #HOOK_SWITCH_MASK @ is hook switch status bit set? 218 beq mdm @ no - try next source 219 220 221 @@@@@@@@@@@@@@@@@@@@@@@@ 222 @ Hook switch interrupt FIQ mode simple handler 223 224 @ Don't toggle active edge, the switch always bounces 225 226 @ Increment hook switch interrupt counter 227 ldr r10, [r9, #BUF_CNT_INT_HSW] 228 add r10, r10, #1 229 str r10, [r9, #BUF_CNT_INT_HSW] 230 @@@@@@@@@@@@@@@@@@@@@@@@ 231 232 233mdm: @Is it a modem interrupt? 234 tst r13, #MODEM_IRQ_MASK @ is modem status bit set? 235 beq irq @ no - check for next interrupt 236 237 238 @@@@@@@@@@@@@@@@@@@@@@@@ 239 @ Modem FIQ mode interrupt handler stub 240 241 @ Increment modem interrupt counter 242 ldr r10, [r9, #BUF_CNT_INT_MDM] 243 add r10, r10, #1 244 str r10, [r9, #BUF_CNT_INT_MDM] 245 @@@@@@@@@@@@@@@@@@@@@@@@ 246 247 248irq: @ Place deferred_fiq interrupt request 249 ldr r12, deferred_fiq_ih_base @ set pointer to IRQ handler 250 mov r10, #DEFERRED_FIQ_MASK @ set deferred_fiq bit 251 str r10, [r12, #IRQ_ISR_REG_OFFSET] @ place it in the ISR register 252 253 ldr r12, omap1510_gpio_base @ set pointer back to GPIO bank 254 b restart @ check for next GPIO interrupt 255 @@@@@@@@@@@@@@@@@@@@@@@@@@@ 256 257 258/* 259 * Virtual addresses for IO 260 */ 261omap_ih1_base: 262 .word OMAP1_IO_ADDRESS(OMAP_IH1_BASE) 263deferred_fiq_ih_base: 264 .word OMAP1_IO_ADDRESS(DEFERRED_FIQ_IH_BASE) 265omap1510_gpio_base: 266 .word OMAP1_IO_ADDRESS(OMAP1510_GPIO_BASE) 267qwerty_fiqin_end: 268 269/* 270 * Check the size of the FIQ, 271 * it cannot go beyond 0xffff0200, and is copied to 0xffff001c 272 */ 273.if (qwerty_fiqin_end - qwerty_fiqin_start) > (0x200 - 0x1c) 274 .err 275.endif 276