1 /*
2 * linux/drivers/video/stifb.c -
3 * Low level Frame buffer driver for HP workstations with
4 * STI (standard text interface) video firmware.
5 *
6 * Copyright (C) 2001-2006 Helge Deller <deller@gmx.de>
7 * Portions Copyright (C) 2001 Thomas Bogendoerfer <tsbogend@alpha.franken.de>
8 *
9 * Based on:
10 * - linux/drivers/video/artistfb.c -- Artist frame buffer driver
11 * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
12 * - based on skeletonfb, which was
13 * Created 28 Dec 1997 by Geert Uytterhoeven
14 * - HP Xhp cfb-based X11 window driver for XFree86
15 * (c)Copyright 1992 Hewlett-Packard Co.
16 *
17 *
18 * The following graphics display devices (NGLE family) are supported by this driver:
19 *
20 * HPA4070A known as "HCRX", a 1280x1024 color device with 8 planes
21 * HPA4071A known as "HCRX24", a 1280x1024 color device with 24 planes,
22 * optionally available with a hardware accelerator as HPA4071A_Z
23 * HPA1659A known as "CRX", a 1280x1024 color device with 8 planes
24 * HPA1439A known as "CRX24", a 1280x1024 color device with 24 planes,
25 * optionally available with a hardware accelerator.
26 * HPA1924A known as "GRX", a 1280x1024 grayscale device with 8 planes
27 * HPA2269A known as "Dual CRX", a 1280x1024 color device with 8 planes,
28 * implements support for two displays on a single graphics card.
29 * HP710C internal graphics support optionally available on the HP9000s710 SPU,
30 * supports 1280x1024 color displays with 8 planes.
31 * HP710G same as HP710C, 1280x1024 grayscale only
32 * HP710L same as HP710C, 1024x768 color only
33 * HP712 internal graphics support on HP9000s712 SPU, supports 640x480,
34 * 1024x768 or 1280x1024 color displays on 8 planes (Artist)
35 *
36 * This file is subject to the terms and conditions of the GNU General Public
37 * License. See the file COPYING in the main directory of this archive
38 * for more details.
39 */
40
41 /* TODO:
42 * - 1bpp mode is completely untested
43 * - add support for h/w acceleration
44 * - add hardware cursor
45 * - automatically disable double buffering (e.g. on RDI precisionbook laptop)
46 */
47
48
49 /* on supported graphic devices you may:
50 * #define FALLBACK_TO_1BPP to fall back to 1 bpp, or
51 * #undef FALLBACK_TO_1BPP to reject support for unsupported cards */
52 #undef FALLBACK_TO_1BPP
53
54 #undef DEBUG_STIFB_REGS /* debug sti register accesses */
55
56
57 #include <linux/module.h>
58 #include <linux/kernel.h>
59 #include <linux/errno.h>
60 #include <linux/string.h>
61 #include <linux/mm.h>
62 #include <linux/slab.h>
63 #include <linux/delay.h>
64 #include <linux/fb.h>
65 #include <linux/init.h>
66 #include <linux/ioport.h>
67 #include <linux/io.h>
68
69 #include <asm/grfioctl.h> /* for HP-UX compatibility */
70 #include <linux/uaccess.h>
71
72 #include <video/sticore.h>
73
74 /* REGION_BASE(fb_info, index) returns the physical address for region <index> */
75 #define REGION_BASE(fb_info, index) \
76 F_EXTEND(fb_info->sti->regions_phys[index])
77
78 #define NGLEDEVDEPROM_CRT_REGION 1
79
80 #define NR_PALETTE 256
81
82 typedef struct {
83 __s32 video_config_reg;
84 __s32 misc_video_start;
85 __s32 horiz_timing_fmt;
86 __s32 serr_timing_fmt;
87 __s32 vert_timing_fmt;
88 __s32 horiz_state;
89 __s32 vert_state;
90 __s32 vtg_state_elements;
91 __s32 pipeline_delay;
92 __s32 misc_video_end;
93 } video_setup_t;
94
95 typedef struct {
96 __s16 sizeof_ngle_data;
97 __s16 x_size_visible; /* visible screen dim in pixels */
98 __s16 y_size_visible;
99 __s16 pad2[15];
100 __s16 cursor_pipeline_delay;
101 __s16 video_interleaves;
102 __s32 pad3[11];
103 } ngle_rom_t;
104
105 struct stifb_info {
106 struct fb_info *info;
107 unsigned int id;
108 ngle_rom_t ngle_rom;
109 struct sti_struct *sti;
110 int deviceSpecificConfig;
111 u32 pseudo_palette[16];
112 };
113
114 static int __initdata stifb_bpp_pref[MAX_STI_ROMS];
115
116 /* ------------------- chipset specific functions -------------------------- */
117
118 /* offsets to graphic-chip internal registers */
119
120 #define REG_1 0x000118
121 #define REG_2 0x000480
122 #define REG_3 0x0004a0
123 #define REG_4 0x000600
124 #define REG_6 0x000800
125 #define REG_7 0x000804
126 #define REG_8 0x000820
127 #define REG_9 0x000a04
128 #define REG_10 0x018000
129 #define REG_11 0x018004
130 #define REG_12 0x01800c
131 #define REG_13 0x018018
132 #define REG_14 0x01801c
133 #define REG_15 0x200000
134 #define REG_15b0 0x200000
135 #define REG_16b1 0x200005
136 #define REG_16b3 0x200007
137 #define REG_21 0x200218
138 #define REG_22 0x0005a0
139 #define REG_23 0x0005c0
140 #define REG_24 0x000808
141 #define REG_25 0x000b00
142 #define REG_26 0x200118
143 #define REG_27 0x200308
144 #define REG_32 0x21003c
145 #define REG_33 0x210040
146 #define REG_34 0x200008
147 #define REG_35 0x018010
148 #define REG_38 0x210020
149 #define REG_39 0x210120
150 #define REG_40 0x210130
151 #define REG_42 0x210028
152 #define REG_43 0x21002c
153 #define REG_44 0x210030
154 #define REG_45 0x210034
155
156 #define READ_BYTE(fb, reg) gsc_readb((fb)->info->fix.mmio_start + (reg))
157 #define READ_WORD(fb, reg) gsc_readl((fb)->info->fix.mmio_start + (reg))
158
159
160 #ifndef DEBUG_STIFB_REGS
161 # define DEBUG_OFF()
162 # define DEBUG_ON()
163 # define WRITE_BYTE(value, fb, reg) gsc_writeb((value), (fb)->info->fix.mmio_start + (reg))
164 # define WRITE_WORD(value, fb, reg) gsc_writel((value), (fb)->info->fix.mmio_start + (reg))
165 #else
166 static int debug_on = 1;
167 # define DEBUG_OFF() debug_on=0
168 # define DEBUG_ON() debug_on=1
169 # define WRITE_BYTE(value,fb,reg) do { if (debug_on) \
170 printk(KERN_DEBUG "%30s: WRITE_BYTE(0x%06x) = 0x%02x (old=0x%02x)\n", \
171 __func__, reg, value, READ_BYTE(fb,reg)); \
172 gsc_writeb((value), (fb)->info->fix.mmio_start + (reg)); } while (0)
173 # define WRITE_WORD(value,fb,reg) do { if (debug_on) \
174 printk(KERN_DEBUG "%30s: WRITE_WORD(0x%06x) = 0x%08x (old=0x%08x)\n", \
175 __func__, reg, value, READ_WORD(fb,reg)); \
176 gsc_writel((value), (fb)->info->fix.mmio_start + (reg)); } while (0)
177 #endif /* DEBUG_STIFB_REGS */
178
179
180 #define ENABLE 1 /* for enabling/disabling screen */
181 #define DISABLE 0
182
183 #define NGLE_LOCK(fb_info) do { } while (0)
184 #define NGLE_UNLOCK(fb_info) do { } while (0)
185
186 static void
SETUP_HW(struct stifb_info * fb)187 SETUP_HW(struct stifb_info *fb)
188 {
189 char stat;
190
191 do {
192 stat = READ_BYTE(fb, REG_15b0);
193 if (!stat)
194 stat = READ_BYTE(fb, REG_15b0);
195 } while (stat);
196 }
197
198
199 static void
SETUP_FB(struct stifb_info * fb)200 SETUP_FB(struct stifb_info *fb)
201 {
202 unsigned int reg10_value = 0;
203
204 SETUP_HW(fb);
205 switch (fb->id)
206 {
207 case CRT_ID_VISUALIZE_EG:
208 case S9000_ID_ARTIST:
209 case S9000_ID_A1659A:
210 reg10_value = 0x13601000;
211 break;
212 case S9000_ID_A1439A:
213 if (fb->info->var.bits_per_pixel == 32)
214 reg10_value = 0xBBA0A000;
215 else
216 reg10_value = 0x13601000;
217 break;
218 case S9000_ID_HCRX:
219 if (fb->info->var.bits_per_pixel == 32)
220 reg10_value = 0xBBA0A000;
221 else
222 reg10_value = 0x13602000;
223 break;
224 case S9000_ID_TIMBER:
225 case CRX24_OVERLAY_PLANES:
226 reg10_value = 0x13602000;
227 break;
228 }
229 if (reg10_value)
230 WRITE_WORD(reg10_value, fb, REG_10);
231 WRITE_WORD(0x83000300, fb, REG_14);
232 SETUP_HW(fb);
233 WRITE_BYTE(1, fb, REG_16b1);
234 }
235
236 static void
START_IMAGE_COLORMAP_ACCESS(struct stifb_info * fb)237 START_IMAGE_COLORMAP_ACCESS(struct stifb_info *fb)
238 {
239 SETUP_HW(fb);
240 WRITE_WORD(0xBBE0F000, fb, REG_10);
241 WRITE_WORD(0x03000300, fb, REG_14);
242 WRITE_WORD(~0, fb, REG_13);
243 }
244
245 static void
WRITE_IMAGE_COLOR(struct stifb_info * fb,int index,int color)246 WRITE_IMAGE_COLOR(struct stifb_info *fb, int index, int color)
247 {
248 SETUP_HW(fb);
249 WRITE_WORD(((0x100+index)<<2), fb, REG_3);
250 WRITE_WORD(color, fb, REG_4);
251 }
252
253 static void
FINISH_IMAGE_COLORMAP_ACCESS(struct stifb_info * fb)254 FINISH_IMAGE_COLORMAP_ACCESS(struct stifb_info *fb)
255 {
256 WRITE_WORD(0x400, fb, REG_2);
257 if (fb->info->var.bits_per_pixel == 32) {
258 WRITE_WORD(0x83000100, fb, REG_1);
259 } else {
260 if (fb->id == S9000_ID_ARTIST || fb->id == CRT_ID_VISUALIZE_EG)
261 WRITE_WORD(0x80000100, fb, REG_26);
262 else
263 WRITE_WORD(0x80000100, fb, REG_1);
264 }
265 SETUP_FB(fb);
266 }
267
268 static void
SETUP_RAMDAC(struct stifb_info * fb)269 SETUP_RAMDAC(struct stifb_info *fb)
270 {
271 SETUP_HW(fb);
272 WRITE_WORD(0x04000000, fb, 0x1020);
273 WRITE_WORD(0xff000000, fb, 0x1028);
274 }
275
276 static void
CRX24_SETUP_RAMDAC(struct stifb_info * fb)277 CRX24_SETUP_RAMDAC(struct stifb_info *fb)
278 {
279 SETUP_HW(fb);
280 WRITE_WORD(0x04000000, fb, 0x1000);
281 WRITE_WORD(0x02000000, fb, 0x1004);
282 WRITE_WORD(0xff000000, fb, 0x1008);
283 WRITE_WORD(0x05000000, fb, 0x1000);
284 WRITE_WORD(0x02000000, fb, 0x1004);
285 WRITE_WORD(0x03000000, fb, 0x1008);
286 }
287
288 #if 0
289 static void
290 HCRX_SETUP_RAMDAC(struct stifb_info *fb)
291 {
292 WRITE_WORD(0xffffffff, fb, REG_32);
293 }
294 #endif
295
296 static void
CRX24_SET_OVLY_MASK(struct stifb_info * fb)297 CRX24_SET_OVLY_MASK(struct stifb_info *fb)
298 {
299 SETUP_HW(fb);
300 WRITE_WORD(0x13a02000, fb, REG_11);
301 WRITE_WORD(0x03000300, fb, REG_14);
302 WRITE_WORD(0x000017f0, fb, REG_3);
303 WRITE_WORD(0xffffffff, fb, REG_13);
304 WRITE_WORD(0xffffffff, fb, REG_22);
305 WRITE_WORD(0x00000000, fb, REG_23);
306 }
307
308 static void
ENABLE_DISABLE_DISPLAY(struct stifb_info * fb,int enable)309 ENABLE_DISABLE_DISPLAY(struct stifb_info *fb, int enable)
310 {
311 unsigned int value = enable ? 0x43000000 : 0x03000000;
312 SETUP_HW(fb);
313 WRITE_WORD(0x06000000, fb, 0x1030);
314 WRITE_WORD(value, fb, 0x1038);
315 }
316
317 static void
CRX24_ENABLE_DISABLE_DISPLAY(struct stifb_info * fb,int enable)318 CRX24_ENABLE_DISABLE_DISPLAY(struct stifb_info *fb, int enable)
319 {
320 unsigned int value = enable ? 0x10000000 : 0x30000000;
321 SETUP_HW(fb);
322 WRITE_WORD(0x01000000, fb, 0x1000);
323 WRITE_WORD(0x02000000, fb, 0x1004);
324 WRITE_WORD(value, fb, 0x1008);
325 }
326
327 static void
ARTIST_ENABLE_DISABLE_DISPLAY(struct stifb_info * fb,int enable)328 ARTIST_ENABLE_DISABLE_DISPLAY(struct stifb_info *fb, int enable)
329 {
330 u32 DregsMiscVideo = REG_21;
331 u32 DregsMiscCtl = REG_27;
332
333 SETUP_HW(fb);
334 if (enable) {
335 WRITE_WORD(READ_WORD(fb, DregsMiscVideo) | 0x0A000000, fb, DregsMiscVideo);
336 WRITE_WORD(READ_WORD(fb, DregsMiscCtl) | 0x00800000, fb, DregsMiscCtl);
337 } else {
338 WRITE_WORD(READ_WORD(fb, DregsMiscVideo) & ~0x0A000000, fb, DregsMiscVideo);
339 WRITE_WORD(READ_WORD(fb, DregsMiscCtl) & ~0x00800000, fb, DregsMiscCtl);
340 }
341 }
342
343 #define GET_ROMTABLE_INDEX(fb) \
344 (READ_BYTE(fb, REG_16b3) - 1)
345
346 #define HYPER_CONFIG_PLANES_24 0x00000100
347
348 #define IS_24_DEVICE(fb) \
349 (fb->deviceSpecificConfig & HYPER_CONFIG_PLANES_24)
350
351 #define IS_888_DEVICE(fb) \
352 (!(IS_24_DEVICE(fb)))
353
354 #define GET_FIFO_SLOTS(fb, cnt, numslots) \
355 { while (cnt < numslots) \
356 cnt = READ_WORD(fb, REG_34); \
357 cnt -= numslots; \
358 }
359
360 #define IndexedDcd 0 /* Pixel data is indexed (pseudo) color */
361 #define Otc04 2 /* Pixels in each longword transfer (4) */
362 #define Otc32 5 /* Pixels in each longword transfer (32) */
363 #define Ots08 3 /* Each pixel is size (8)d transfer (1) */
364 #define OtsIndirect 6 /* Each bit goes through FG/BG color(8) */
365 #define AddrLong 5 /* FB address is Long aligned (pixel) */
366 #define BINovly 0x2 /* 8 bit overlay */
367 #define BINapp0I 0x0 /* Application Buffer 0, Indexed */
368 #define BINapp1I 0x1 /* Application Buffer 1, Indexed */
369 #define BINapp0F8 0xa /* Application Buffer 0, Fractional 8-8-8 */
370 #define BINattr 0xd /* Attribute Bitmap */
371 #define RopSrc 0x3
372 #define BitmapExtent08 3 /* Each write hits ( 8) bits in depth */
373 #define BitmapExtent32 5 /* Each write hits (32) bits in depth */
374 #define DataDynamic 0 /* Data register reloaded by direct access */
375 #define MaskDynamic 1 /* Mask register reloaded by direct access */
376 #define MaskOtc 0 /* Mask contains Object Count valid bits */
377
378 #define MaskAddrOffset(offset) (offset)
379 #define StaticReg(en) (en)
380 #define BGx(en) (en)
381 #define FGx(en) (en)
382
383 #define BAJustPoint(offset) (offset)
384 #define BAIndexBase(base) (base)
385 #define BA(F,C,S,A,J,B,I) \
386 (((F)<<31)|((C)<<27)|((S)<<24)|((A)<<21)|((J)<<16)|((B)<<12)|(I))
387
388 #define IBOvals(R,M,X,S,D,L,B,F) \
389 (((R)<<8)|((M)<<16)|((X)<<24)|((S)<<29)|((D)<<28)|((L)<<31)|((B)<<1)|(F))
390
391 #define NGLE_QUICK_SET_IMAGE_BITMAP_OP(fb, val) \
392 WRITE_WORD(val, fb, REG_14)
393
394 #define NGLE_QUICK_SET_DST_BM_ACCESS(fb, val) \
395 WRITE_WORD(val, fb, REG_11)
396
397 #define NGLE_QUICK_SET_CTL_PLN_REG(fb, val) \
398 WRITE_WORD(val, fb, REG_12)
399
400 #define NGLE_REALLY_SET_IMAGE_PLANEMASK(fb, plnmsk32) \
401 WRITE_WORD(plnmsk32, fb, REG_13)
402
403 #define NGLE_REALLY_SET_IMAGE_FG_COLOR(fb, fg32) \
404 WRITE_WORD(fg32, fb, REG_35)
405
406 #define NGLE_SET_TRANSFERDATA(fb, val) \
407 WRITE_WORD(val, fb, REG_8)
408
409 #define NGLE_SET_DSTXY(fb, val) \
410 WRITE_WORD(val, fb, REG_6)
411
412 #define NGLE_LONG_FB_ADDRESS(fbaddrbase, x, y) ( \
413 (u32) (fbaddrbase) + \
414 ( (unsigned int) ( (y) << 13 ) | \
415 (unsigned int) ( (x) << 2 ) ) \
416 )
417
418 #define NGLE_BINC_SET_DSTADDR(fb, addr) \
419 WRITE_WORD(addr, fb, REG_3)
420
421 #define NGLE_BINC_SET_SRCADDR(fb, addr) \
422 WRITE_WORD(addr, fb, REG_2)
423
424 #define NGLE_BINC_SET_DSTMASK(fb, mask) \
425 WRITE_WORD(mask, fb, REG_22)
426
427 #define NGLE_BINC_WRITE32(fb, data32) \
428 WRITE_WORD(data32, fb, REG_23)
429
430 #define START_COLORMAPLOAD(fb, cmapBltCtlData32) \
431 WRITE_WORD((cmapBltCtlData32), fb, REG_38)
432
433 #define SET_LENXY_START_RECFILL(fb, lenxy) \
434 WRITE_WORD(lenxy, fb, REG_9)
435
436 #define SETUP_COPYAREA(fb) \
437 WRITE_BYTE(0, fb, REG_16b1)
438
439 static void
HYPER_ENABLE_DISABLE_DISPLAY(struct stifb_info * fb,int enable)440 HYPER_ENABLE_DISABLE_DISPLAY(struct stifb_info *fb, int enable)
441 {
442 u32 DregsHypMiscVideo = REG_33;
443 unsigned int value;
444 SETUP_HW(fb);
445 value = READ_WORD(fb, DregsHypMiscVideo);
446 if (enable)
447 value |= 0x0A000000;
448 else
449 value &= ~0x0A000000;
450 WRITE_WORD(value, fb, DregsHypMiscVideo);
451 }
452
453
454 /* BufferNumbers used by SETUP_ATTR_ACCESS() */
455 #define BUFF0_CMAP0 0x00001e02
456 #define BUFF1_CMAP0 0x02001e02
457 #define BUFF1_CMAP3 0x0c001e02
458 #define ARTIST_CMAP0 0x00000102
459 #define HYPER_CMAP8 0x00000100
460 #define HYPER_CMAP24 0x00000800
461
462 static void
SETUP_ATTR_ACCESS(struct stifb_info * fb,unsigned BufferNumber)463 SETUP_ATTR_ACCESS(struct stifb_info *fb, unsigned BufferNumber)
464 {
465 SETUP_HW(fb);
466 WRITE_WORD(0x2EA0D000, fb, REG_11);
467 WRITE_WORD(0x23000302, fb, REG_14);
468 WRITE_WORD(BufferNumber, fb, REG_12);
469 WRITE_WORD(0xffffffff, fb, REG_8);
470 }
471
472 static void
SET_ATTR_SIZE(struct stifb_info * fb,int width,int height)473 SET_ATTR_SIZE(struct stifb_info *fb, int width, int height)
474 {
475 /* REG_6 seems to have special values when run on a
476 RDI precisionbook parisc laptop (INTERNAL_EG_DX1024 or
477 INTERNAL_EG_X1024). The values are:
478 0x2f0: internal (LCD) & external display enabled
479 0x2a0: external display only
480 0x000: zero on standard artist graphic cards
481 */
482 WRITE_WORD(0x00000000, fb, REG_6);
483 WRITE_WORD((width<<16) | height, fb, REG_9);
484 WRITE_WORD(0x05000000, fb, REG_6);
485 WRITE_WORD(0x00040001, fb, REG_9);
486 }
487
488 static void
FINISH_ATTR_ACCESS(struct stifb_info * fb)489 FINISH_ATTR_ACCESS(struct stifb_info *fb)
490 {
491 SETUP_HW(fb);
492 WRITE_WORD(0x00000000, fb, REG_12);
493 }
494
495 static void
elkSetupPlanes(struct stifb_info * fb)496 elkSetupPlanes(struct stifb_info *fb)
497 {
498 SETUP_RAMDAC(fb);
499 SETUP_FB(fb);
500 }
501
502 static void
ngleSetupAttrPlanes(struct stifb_info * fb,int BufferNumber)503 ngleSetupAttrPlanes(struct stifb_info *fb, int BufferNumber)
504 {
505 SETUP_ATTR_ACCESS(fb, BufferNumber);
506 SET_ATTR_SIZE(fb, fb->info->var.xres, fb->info->var.yres);
507 FINISH_ATTR_ACCESS(fb);
508 SETUP_FB(fb);
509 }
510
511
512 static void
rattlerSetupPlanes(struct stifb_info * fb)513 rattlerSetupPlanes(struct stifb_info *fb)
514 {
515 int saved_id, y;
516
517 /* Write RAMDAC pixel read mask register so all overlay
518 * planes are display-enabled. (CRX24 uses Bt462 pixel
519 * read mask register for overlay planes, not image planes).
520 */
521 CRX24_SETUP_RAMDAC(fb);
522
523 /* change fb->id temporarily to fool SETUP_FB() */
524 saved_id = fb->id;
525 fb->id = CRX24_OVERLAY_PLANES;
526 SETUP_FB(fb);
527 fb->id = saved_id;
528
529 for (y = 0; y < fb->info->var.yres; ++y)
530 fb_memset_io(fb->info->screen_base + y * fb->info->fix.line_length,
531 0xff, fb->info->var.xres * fb->info->var.bits_per_pixel/8);
532
533 CRX24_SET_OVLY_MASK(fb);
534 SETUP_FB(fb);
535 }
536
537
538 #define HYPER_CMAP_TYPE 0
539 #define NGLE_CMAP_INDEXED0_TYPE 0
540 #define NGLE_CMAP_OVERLAY_TYPE 3
541
542 /* typedef of LUT (Colormap) BLT Control Register */
543 typedef union /* Note assumption that fields are packed left-to-right */
544 { u32 all;
545 struct
546 {
547 unsigned enable : 1;
548 unsigned waitBlank : 1;
549 unsigned reserved1 : 4;
550 unsigned lutOffset : 10; /* Within destination LUT */
551 unsigned lutType : 2; /* Cursor, image, overlay */
552 unsigned reserved2 : 4;
553 unsigned length : 10;
554 } fields;
555 } NgleLutBltCtl;
556
557
558 #if 0
559 static NgleLutBltCtl
560 setNgleLutBltCtl(struct stifb_info *fb, int offsetWithinLut, int length)
561 {
562 NgleLutBltCtl lutBltCtl;
563
564 /* set enable, zero reserved fields */
565 lutBltCtl.all = 0x80000000;
566 lutBltCtl.fields.length = length;
567
568 switch (fb->id)
569 {
570 case S9000_ID_A1439A: /* CRX24 */
571 if (fb->var.bits_per_pixel == 8) {
572 lutBltCtl.fields.lutType = NGLE_CMAP_OVERLAY_TYPE;
573 lutBltCtl.fields.lutOffset = 0;
574 } else {
575 lutBltCtl.fields.lutType = NGLE_CMAP_INDEXED0_TYPE;
576 lutBltCtl.fields.lutOffset = 0 * 256;
577 }
578 break;
579
580 case S9000_ID_ARTIST:
581 lutBltCtl.fields.lutType = NGLE_CMAP_INDEXED0_TYPE;
582 lutBltCtl.fields.lutOffset = 0 * 256;
583 break;
584
585 default:
586 lutBltCtl.fields.lutType = NGLE_CMAP_INDEXED0_TYPE;
587 lutBltCtl.fields.lutOffset = 0;
588 break;
589 }
590
591 /* Offset points to start of LUT. Adjust for within LUT */
592 lutBltCtl.fields.lutOffset += offsetWithinLut;
593
594 return lutBltCtl;
595 }
596 #endif
597
598 static NgleLutBltCtl
setHyperLutBltCtl(struct stifb_info * fb,int offsetWithinLut,int length)599 setHyperLutBltCtl(struct stifb_info *fb, int offsetWithinLut, int length)
600 {
601 NgleLutBltCtl lutBltCtl;
602
603 /* set enable, zero reserved fields */
604 lutBltCtl.all = 0x80000000;
605
606 lutBltCtl.fields.length = length;
607 lutBltCtl.fields.lutType = HYPER_CMAP_TYPE;
608
609 /* Expect lutIndex to be 0 or 1 for image cmaps, 2 or 3 for overlay cmaps */
610 if (fb->info->var.bits_per_pixel == 8)
611 lutBltCtl.fields.lutOffset = 2 * 256;
612 else
613 lutBltCtl.fields.lutOffset = 0 * 256;
614
615 /* Offset points to start of LUT. Adjust for within LUT */
616 lutBltCtl.fields.lutOffset += offsetWithinLut;
617
618 return lutBltCtl;
619 }
620
621
hyperUndoITE(struct stifb_info * fb)622 static void hyperUndoITE(struct stifb_info *fb)
623 {
624 int nFreeFifoSlots = 0;
625 u32 fbAddr;
626
627 NGLE_LOCK(fb);
628
629 GET_FIFO_SLOTS(fb, nFreeFifoSlots, 1);
630 WRITE_WORD(0xffffffff, fb, REG_32);
631
632 /* Write overlay transparency mask so only entry 255 is transparent */
633
634 /* Hardware setup for full-depth write to "magic" location */
635 GET_FIFO_SLOTS(fb, nFreeFifoSlots, 7);
636 NGLE_QUICK_SET_DST_BM_ACCESS(fb,
637 BA(IndexedDcd, Otc04, Ots08, AddrLong,
638 BAJustPoint(0), BINovly, BAIndexBase(0)));
639 NGLE_QUICK_SET_IMAGE_BITMAP_OP(fb,
640 IBOvals(RopSrc, MaskAddrOffset(0),
641 BitmapExtent08, StaticReg(0),
642 DataDynamic, MaskOtc, BGx(0), FGx(0)));
643
644 /* Now prepare to write to the "magic" location */
645 fbAddr = NGLE_LONG_FB_ADDRESS(0, 1532, 0);
646 NGLE_BINC_SET_DSTADDR(fb, fbAddr);
647 NGLE_REALLY_SET_IMAGE_PLANEMASK(fb, 0xffffff);
648 NGLE_BINC_SET_DSTMASK(fb, 0xffffffff);
649
650 /* Finally, write a zero to clear the mask */
651 NGLE_BINC_WRITE32(fb, 0);
652
653 NGLE_UNLOCK(fb);
654 }
655
656 static void
ngleDepth8_ClearImagePlanes(struct stifb_info * fb)657 ngleDepth8_ClearImagePlanes(struct stifb_info *fb)
658 {
659 /* FIXME! */
660 }
661
662 static void
ngleDepth24_ClearImagePlanes(struct stifb_info * fb)663 ngleDepth24_ClearImagePlanes(struct stifb_info *fb)
664 {
665 /* FIXME! */
666 }
667
668 static void
ngleResetAttrPlanes(struct stifb_info * fb,unsigned int ctlPlaneReg)669 ngleResetAttrPlanes(struct stifb_info *fb, unsigned int ctlPlaneReg)
670 {
671 int nFreeFifoSlots = 0;
672 u32 packed_dst;
673 u32 packed_len;
674
675 NGLE_LOCK(fb);
676
677 GET_FIFO_SLOTS(fb, nFreeFifoSlots, 4);
678 NGLE_QUICK_SET_DST_BM_ACCESS(fb,
679 BA(IndexedDcd, Otc32, OtsIndirect,
680 AddrLong, BAJustPoint(0),
681 BINattr, BAIndexBase(0)));
682 NGLE_QUICK_SET_CTL_PLN_REG(fb, ctlPlaneReg);
683 NGLE_SET_TRANSFERDATA(fb, 0xffffffff);
684
685 NGLE_QUICK_SET_IMAGE_BITMAP_OP(fb,
686 IBOvals(RopSrc, MaskAddrOffset(0),
687 BitmapExtent08, StaticReg(1),
688 DataDynamic, MaskOtc,
689 BGx(0), FGx(0)));
690 packed_dst = 0;
691 packed_len = (fb->info->var.xres << 16) | fb->info->var.yres;
692 GET_FIFO_SLOTS(fb, nFreeFifoSlots, 2);
693 NGLE_SET_DSTXY(fb, packed_dst);
694 SET_LENXY_START_RECFILL(fb, packed_len);
695
696 /*
697 * In order to work around an ELK hardware problem (Buffy doesn't
698 * always flush it's buffers when writing to the attribute
699 * planes), at least 4 pixels must be written to the attribute
700 * planes starting at (X == 1280) and (Y != to the last Y written
701 * by BIF):
702 */
703
704 if (fb->id == S9000_ID_A1659A) { /* ELK_DEVICE_ID */
705 /* It's safe to use scanline zero: */
706 packed_dst = (1280 << 16);
707 GET_FIFO_SLOTS(fb, nFreeFifoSlots, 2);
708 NGLE_SET_DSTXY(fb, packed_dst);
709 packed_len = (4 << 16) | 1;
710 SET_LENXY_START_RECFILL(fb, packed_len);
711 } /* ELK Hardware Kludge */
712
713 /**** Finally, set the Control Plane Register back to zero: ****/
714 GET_FIFO_SLOTS(fb, nFreeFifoSlots, 1);
715 NGLE_QUICK_SET_CTL_PLN_REG(fb, 0);
716
717 NGLE_UNLOCK(fb);
718 }
719
720 static void
ngleClearOverlayPlanes(struct stifb_info * fb,int mask,int data)721 ngleClearOverlayPlanes(struct stifb_info *fb, int mask, int data)
722 {
723 int nFreeFifoSlots = 0;
724 u32 packed_dst;
725 u32 packed_len;
726
727 NGLE_LOCK(fb);
728
729 /* Hardware setup */
730 GET_FIFO_SLOTS(fb, nFreeFifoSlots, 8);
731 NGLE_QUICK_SET_DST_BM_ACCESS(fb,
732 BA(IndexedDcd, Otc04, Ots08, AddrLong,
733 BAJustPoint(0), BINovly, BAIndexBase(0)));
734
735 NGLE_SET_TRANSFERDATA(fb, 0xffffffff); /* Write foreground color */
736
737 NGLE_REALLY_SET_IMAGE_FG_COLOR(fb, data);
738 NGLE_REALLY_SET_IMAGE_PLANEMASK(fb, mask);
739
740 packed_dst = 0;
741 packed_len = (fb->info->var.xres << 16) | fb->info->var.yres;
742 NGLE_SET_DSTXY(fb, packed_dst);
743
744 /* Write zeroes to overlay planes */
745 NGLE_QUICK_SET_IMAGE_BITMAP_OP(fb,
746 IBOvals(RopSrc, MaskAddrOffset(0),
747 BitmapExtent08, StaticReg(0),
748 DataDynamic, MaskOtc, BGx(0), FGx(0)));
749
750 SET_LENXY_START_RECFILL(fb, packed_len);
751
752 NGLE_UNLOCK(fb);
753 }
754
755 static void
hyperResetPlanes(struct stifb_info * fb,int enable)756 hyperResetPlanes(struct stifb_info *fb, int enable)
757 {
758 unsigned int controlPlaneReg;
759
760 NGLE_LOCK(fb);
761
762 if (IS_24_DEVICE(fb))
763 if (fb->info->var.bits_per_pixel == 32)
764 controlPlaneReg = 0x04000F00;
765 else
766 controlPlaneReg = 0x00000F00; /* 0x00000800 should be enough, but lets clear all 4 bits */
767 else
768 controlPlaneReg = 0x00000F00; /* 0x00000100 should be enough, but lets clear all 4 bits */
769
770 switch (enable) {
771 case ENABLE:
772 /* clear screen */
773 if (IS_24_DEVICE(fb))
774 ngleDepth24_ClearImagePlanes(fb);
775 else
776 ngleDepth8_ClearImagePlanes(fb);
777
778 /* Paint attribute planes for default case.
779 * On Hyperdrive, this means all windows using overlay cmap 0. */
780 ngleResetAttrPlanes(fb, controlPlaneReg);
781
782 /* clear overlay planes */
783 ngleClearOverlayPlanes(fb, 0xff, 255);
784
785 /**************************************************
786 ** Also need to counteract ITE settings
787 **************************************************/
788 hyperUndoITE(fb);
789 break;
790
791 case DISABLE:
792 /* clear screen */
793 if (IS_24_DEVICE(fb))
794 ngleDepth24_ClearImagePlanes(fb);
795 else
796 ngleDepth8_ClearImagePlanes(fb);
797 ngleResetAttrPlanes(fb, controlPlaneReg);
798 ngleClearOverlayPlanes(fb, 0xff, 0);
799 break;
800
801 case -1: /* RESET */
802 hyperUndoITE(fb);
803 ngleResetAttrPlanes(fb, controlPlaneReg);
804 break;
805 }
806
807 NGLE_UNLOCK(fb);
808 }
809
810 /* Return pointer to in-memory structure holding ELK device-dependent ROM values. */
811
812 static void
ngleGetDeviceRomData(struct stifb_info * fb)813 ngleGetDeviceRomData(struct stifb_info *fb)
814 {
815 #if 0
816 XXX: FIXME: !!!
817 int *pBytePerLongDevDepData;/* data byte == LSB */
818 int *pRomTable;
819 NgleDevRomData *pPackedDevRomData;
820 int sizePackedDevRomData = sizeof(*pPackedDevRomData);
821 char *pCard8;
822 int i;
823 char *mapOrigin = NULL;
824
825 int romTableIdx;
826
827 pPackedDevRomData = fb->ngle_rom;
828
829 SETUP_HW(fb);
830 if (fb->id == S9000_ID_ARTIST) {
831 pPackedDevRomData->cursor_pipeline_delay = 4;
832 pPackedDevRomData->video_interleaves = 4;
833 } else {
834 /* Get pointer to unpacked byte/long data in ROM */
835 pBytePerLongDevDepData = fb->sti->regions[NGLEDEVDEPROM_CRT_REGION];
836
837 /* Tomcat supports several resolutions: 1280x1024, 1024x768, 640x480 */
838 if (fb->id == S9000_ID_TOMCAT)
839 {
840 /* jump to the correct ROM table */
841 GET_ROMTABLE_INDEX(romTableIdx);
842 while (romTableIdx > 0)
843 {
844 pCard8 = (Card8 *) pPackedDevRomData;
845 pRomTable = pBytePerLongDevDepData;
846 /* Pack every fourth byte from ROM into structure */
847 for (i = 0; i < sizePackedDevRomData; i++)
848 {
849 *pCard8++ = (Card8) (*pRomTable++);
850 }
851
852 pBytePerLongDevDepData = (Card32 *)
853 ((Card8 *) pBytePerLongDevDepData +
854 pPackedDevRomData->sizeof_ngle_data);
855
856 romTableIdx--;
857 }
858 }
859
860 pCard8 = (Card8 *) pPackedDevRomData;
861
862 /* Pack every fourth byte from ROM into structure */
863 for (i = 0; i < sizePackedDevRomData; i++)
864 {
865 *pCard8++ = (Card8) (*pBytePerLongDevDepData++);
866 }
867 }
868
869 SETUP_FB(fb);
870 #endif
871 }
872
873
874 #define HYPERBOWL_MODE_FOR_8_OVER_88_LUT0_NO_TRANSPARENCIES 4
875 #define HYPERBOWL_MODE01_8_24_LUT0_TRANSPARENT_LUT1_OPAQUE 8
876 #define HYPERBOWL_MODE01_8_24_LUT0_OPAQUE_LUT1_OPAQUE 10
877 #define HYPERBOWL_MODE2_8_24 15
878
879 /* HCRX specific boot-time initialization */
880 static void __init
SETUP_HCRX(struct stifb_info * fb)881 SETUP_HCRX(struct stifb_info *fb)
882 {
883 int hyperbowl;
884 int nFreeFifoSlots = 0;
885
886 if (fb->id != S9000_ID_HCRX)
887 return;
888
889 /* Initialize Hyperbowl registers */
890 GET_FIFO_SLOTS(fb, nFreeFifoSlots, 7);
891
892 if (IS_24_DEVICE(fb)) {
893 hyperbowl = (fb->info->var.bits_per_pixel == 32) ?
894 HYPERBOWL_MODE01_8_24_LUT0_TRANSPARENT_LUT1_OPAQUE :
895 HYPERBOWL_MODE01_8_24_LUT0_OPAQUE_LUT1_OPAQUE;
896
897 /* First write to Hyperbowl must happen twice (bug) */
898 WRITE_WORD(hyperbowl, fb, REG_40);
899 WRITE_WORD(hyperbowl, fb, REG_40);
900
901 WRITE_WORD(HYPERBOWL_MODE2_8_24, fb, REG_39);
902
903 WRITE_WORD(0x014c0148, fb, REG_42); /* Set lut 0 to be the direct color */
904 WRITE_WORD(0x404c4048, fb, REG_43);
905 WRITE_WORD(0x034c0348, fb, REG_44);
906 WRITE_WORD(0x444c4448, fb, REG_45);
907 } else {
908 hyperbowl = HYPERBOWL_MODE_FOR_8_OVER_88_LUT0_NO_TRANSPARENCIES;
909
910 /* First write to Hyperbowl must happen twice (bug) */
911 WRITE_WORD(hyperbowl, fb, REG_40);
912 WRITE_WORD(hyperbowl, fb, REG_40);
913
914 WRITE_WORD(0x00000000, fb, REG_42);
915 WRITE_WORD(0x00000000, fb, REG_43);
916 WRITE_WORD(0x00000000, fb, REG_44);
917 WRITE_WORD(0x444c4048, fb, REG_45);
918 }
919 }
920
921
922 /* ------------------- driver specific functions --------------------------- */
923
924 static int
stifb_check_var(struct fb_var_screeninfo * var,struct fb_info * info)925 stifb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
926 {
927 struct stifb_info *fb = info->par;
928
929 if (var->xres != fb->info->var.xres ||
930 var->yres != fb->info->var.yres ||
931 var->bits_per_pixel != fb->info->var.bits_per_pixel)
932 return -EINVAL;
933
934 var->xres_virtual = var->xres;
935 var->yres_virtual = var->yres;
936 var->xoffset = 0;
937 var->yoffset = 0;
938 var->grayscale = fb->info->var.grayscale;
939 var->red.length = fb->info->var.red.length;
940 var->green.length = fb->info->var.green.length;
941 var->blue.length = fb->info->var.blue.length;
942
943 return 0;
944 }
945
946 static int
stifb_setcolreg(u_int regno,u_int red,u_int green,u_int blue,u_int transp,struct fb_info * info)947 stifb_setcolreg(u_int regno, u_int red, u_int green,
948 u_int blue, u_int transp, struct fb_info *info)
949 {
950 struct stifb_info *fb = info->par;
951 u32 color;
952
953 if (regno >= NR_PALETTE)
954 return 1;
955
956 red >>= 8;
957 green >>= 8;
958 blue >>= 8;
959
960 DEBUG_OFF();
961
962 START_IMAGE_COLORMAP_ACCESS(fb);
963
964 if (unlikely(fb->info->var.grayscale)) {
965 /* gray = 0.30*R + 0.59*G + 0.11*B */
966 color = ((red * 77) +
967 (green * 151) +
968 (blue * 28)) >> 8;
969 } else {
970 color = ((red << 16) |
971 (green << 8) |
972 (blue));
973 }
974
975 if (fb->info->fix.visual == FB_VISUAL_DIRECTCOLOR) {
976 struct fb_var_screeninfo *var = &fb->info->var;
977 if (regno < 16)
978 ((u32 *)fb->info->pseudo_palette)[regno] =
979 regno << var->red.offset |
980 regno << var->green.offset |
981 regno << var->blue.offset;
982 }
983
984 WRITE_IMAGE_COLOR(fb, regno, color);
985
986 if (fb->id == S9000_ID_HCRX) {
987 NgleLutBltCtl lutBltCtl;
988
989 lutBltCtl = setHyperLutBltCtl(fb,
990 0, /* Offset w/i LUT */
991 256); /* Load entire LUT */
992 NGLE_BINC_SET_SRCADDR(fb,
993 NGLE_LONG_FB_ADDRESS(0, 0x100, 0));
994 /* 0x100 is same as used in WRITE_IMAGE_COLOR() */
995 START_COLORMAPLOAD(fb, lutBltCtl.all);
996 SETUP_FB(fb);
997 } else {
998 /* cleanup colormap hardware */
999 FINISH_IMAGE_COLORMAP_ACCESS(fb);
1000 }
1001
1002 DEBUG_ON();
1003
1004 return 0;
1005 }
1006
1007 static int
stifb_blank(int blank_mode,struct fb_info * info)1008 stifb_blank(int blank_mode, struct fb_info *info)
1009 {
1010 struct stifb_info *fb = info->par;
1011 int enable = (blank_mode == 0) ? ENABLE : DISABLE;
1012
1013 switch (fb->id) {
1014 case S9000_ID_A1439A:
1015 CRX24_ENABLE_DISABLE_DISPLAY(fb, enable);
1016 break;
1017 case CRT_ID_VISUALIZE_EG:
1018 case S9000_ID_ARTIST:
1019 ARTIST_ENABLE_DISABLE_DISPLAY(fb, enable);
1020 break;
1021 case S9000_ID_HCRX:
1022 HYPER_ENABLE_DISABLE_DISPLAY(fb, enable);
1023 break;
1024 case S9000_ID_A1659A:
1025 case S9000_ID_TIMBER:
1026 case CRX24_OVERLAY_PLANES:
1027 default:
1028 ENABLE_DISABLE_DISPLAY(fb, enable);
1029 break;
1030 }
1031
1032 SETUP_FB(fb);
1033 return 0;
1034 }
1035
1036 static void
stifb_copyarea(struct fb_info * info,const struct fb_copyarea * area)1037 stifb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
1038 {
1039 struct stifb_info *fb = info->par;
1040
1041 SETUP_COPYAREA(fb);
1042
1043 SETUP_HW(fb);
1044 if (fb->info->var.bits_per_pixel == 32) {
1045 WRITE_WORD(0xBBA0A000, fb, REG_10);
1046
1047 NGLE_REALLY_SET_IMAGE_PLANEMASK(fb, 0xffffffff);
1048 } else {
1049 WRITE_WORD(fb->id == S9000_ID_HCRX ? 0x13a02000 : 0x13a01000, fb, REG_10);
1050
1051 NGLE_REALLY_SET_IMAGE_PLANEMASK(fb, 0xff);
1052 }
1053
1054 NGLE_QUICK_SET_IMAGE_BITMAP_OP(fb,
1055 IBOvals(RopSrc, MaskAddrOffset(0),
1056 BitmapExtent08, StaticReg(1),
1057 DataDynamic, MaskOtc, BGx(0), FGx(0)));
1058
1059 WRITE_WORD(((area->sx << 16) | area->sy), fb, REG_24);
1060 WRITE_WORD(((area->width << 16) | area->height), fb, REG_7);
1061 WRITE_WORD(((area->dx << 16) | area->dy), fb, REG_25);
1062
1063 SETUP_FB(fb);
1064 }
1065
1066 #define ARTIST_VRAM_SIZE 0x000804
1067 #define ARTIST_VRAM_SRC 0x000808
1068 #define ARTIST_VRAM_SIZE_TRIGGER_WINFILL 0x000a04
1069 #define ARTIST_VRAM_DEST_TRIGGER_BLOCKMOVE 0x000b00
1070 #define ARTIST_SRC_BM_ACCESS 0x018008
1071 #define ARTIST_FGCOLOR 0x018010
1072 #define ARTIST_BGCOLOR 0x018014
1073 #define ARTIST_BITMAP_OP 0x01801c
1074
1075 static void
stifb_fillrect(struct fb_info * info,const struct fb_fillrect * rect)1076 stifb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
1077 {
1078 struct stifb_info *fb = info->par;
1079
1080 if (rect->rop != ROP_COPY ||
1081 (fb->id == S9000_ID_HCRX && fb->info->var.bits_per_pixel == 32))
1082 return cfb_fillrect(info, rect);
1083
1084 SETUP_HW(fb);
1085
1086 if (fb->info->var.bits_per_pixel == 32) {
1087 WRITE_WORD(0xBBA0A000, fb, REG_10);
1088
1089 NGLE_REALLY_SET_IMAGE_PLANEMASK(fb, 0xffffffff);
1090 } else {
1091 WRITE_WORD(fb->id == S9000_ID_HCRX ? 0x13a02000 : 0x13a01000, fb, REG_10);
1092
1093 NGLE_REALLY_SET_IMAGE_PLANEMASK(fb, 0xff);
1094 }
1095
1096 WRITE_WORD(0x03000300, fb, ARTIST_BITMAP_OP);
1097 WRITE_WORD(0x2ea01000, fb, ARTIST_SRC_BM_ACCESS);
1098 NGLE_QUICK_SET_DST_BM_ACCESS(fb, 0x2ea01000);
1099 NGLE_REALLY_SET_IMAGE_FG_COLOR(fb, rect->color);
1100 WRITE_WORD(0, fb, ARTIST_BGCOLOR);
1101
1102 NGLE_SET_DSTXY(fb, (rect->dx << 16) | (rect->dy));
1103 SET_LENXY_START_RECFILL(fb, (rect->width << 16) | (rect->height));
1104
1105 SETUP_FB(fb);
1106 }
1107
1108 static void __init
stifb_init_display(struct stifb_info * fb)1109 stifb_init_display(struct stifb_info *fb)
1110 {
1111 int id = fb->id;
1112
1113 SETUP_FB(fb);
1114
1115 /* HCRX specific initialization */
1116 SETUP_HCRX(fb);
1117
1118 /*
1119 if (id == S9000_ID_HCRX)
1120 hyperInitSprite(fb);
1121 else
1122 ngleInitSprite(fb);
1123 */
1124
1125 /* Initialize the image planes. */
1126 switch (id) {
1127 case S9000_ID_HCRX:
1128 hyperResetPlanes(fb, ENABLE);
1129 break;
1130 case S9000_ID_A1439A:
1131 rattlerSetupPlanes(fb);
1132 break;
1133 case S9000_ID_A1659A:
1134 case S9000_ID_ARTIST:
1135 case CRT_ID_VISUALIZE_EG:
1136 elkSetupPlanes(fb);
1137 break;
1138 }
1139
1140 /* Clear attribute planes on non HCRX devices. */
1141 switch (id) {
1142 case S9000_ID_A1659A:
1143 case S9000_ID_A1439A:
1144 if (fb->info->var.bits_per_pixel == 32)
1145 ngleSetupAttrPlanes(fb, BUFF1_CMAP3);
1146 else {
1147 ngleSetupAttrPlanes(fb, BUFF1_CMAP0);
1148 }
1149 if (id == S9000_ID_A1439A)
1150 ngleClearOverlayPlanes(fb, 0xff, 0);
1151 break;
1152 case S9000_ID_ARTIST:
1153 case CRT_ID_VISUALIZE_EG:
1154 if (fb->info->var.bits_per_pixel == 32)
1155 ngleSetupAttrPlanes(fb, BUFF1_CMAP3);
1156 else {
1157 ngleSetupAttrPlanes(fb, ARTIST_CMAP0);
1158 }
1159 break;
1160 }
1161 stifb_blank(0, fb->info); /* 0=enable screen */
1162
1163 SETUP_FB(fb);
1164 }
1165
1166 /* ------------ Interfaces to hardware functions ------------ */
1167
1168 static const struct fb_ops stifb_ops = {
1169 .owner = THIS_MODULE,
1170 __FB_DEFAULT_IOMEM_OPS_RDWR,
1171 .fb_check_var = stifb_check_var,
1172 .fb_setcolreg = stifb_setcolreg,
1173 .fb_blank = stifb_blank,
1174 .fb_fillrect = stifb_fillrect,
1175 .fb_copyarea = stifb_copyarea,
1176 .fb_imageblit = cfb_imageblit,
1177 __FB_DEFAULT_IOMEM_OPS_MMAP,
1178 };
1179
1180
1181 /*
1182 * Initialization
1183 */
1184
stifb_init_fb(struct sti_struct * sti,int bpp_pref)1185 static int __init stifb_init_fb(struct sti_struct *sti, int bpp_pref)
1186 {
1187 struct fb_fix_screeninfo *fix;
1188 struct fb_var_screeninfo *var;
1189 struct stifb_info *fb;
1190 struct fb_info *info;
1191 unsigned long sti_rom_address;
1192 char modestr[32];
1193 char *dev_name;
1194 int bpp, xres, yres;
1195
1196 info = framebuffer_alloc(sizeof(*fb), sti->dev);
1197 if (!info)
1198 return -ENOMEM;
1199 fb = info->par;
1200 fb->info = info;
1201
1202 /* set struct to a known state */
1203 fix = &info->fix;
1204 var = &info->var;
1205
1206 fb->sti = sti;
1207 dev_name = sti->sti_data->inq_outptr.dev_name;
1208 /* store upper 32bits of the graphics id */
1209 fb->id = fb->sti->graphics_id[0];
1210
1211 /* only supported cards are allowed */
1212 switch (fb->id) {
1213 case CRT_ID_VISUALIZE_EG:
1214 /* Visualize cards can run either in "double buffer" or
1215 "standard" mode. Depending on the mode, the card reports
1216 a different device name, e.g. "INTERNAL_EG_DX1024" in double
1217 buffer mode and "INTERNAL_EG_X1024" in standard mode.
1218 Since this driver only supports standard mode, we check
1219 if the device name contains the string "DX" and tell the
1220 user how to reconfigure the card. */
1221 if (strstr(dev_name, "DX")) {
1222 printk(KERN_WARNING
1223 "WARNING: stifb framebuffer driver does not support '%s' in double-buffer mode.\n"
1224 "WARNING: Please disable the double-buffer mode in IPL menu (the PARISC-BIOS).\n",
1225 dev_name);
1226 goto out_err0;
1227 }
1228 fallthrough;
1229 case S9000_ID_ARTIST:
1230 case S9000_ID_HCRX:
1231 case S9000_ID_TIMBER:
1232 case S9000_ID_A1659A:
1233 case S9000_ID_A1439A:
1234 break;
1235 default:
1236 printk(KERN_WARNING "stifb: '%s' (id: 0x%08x) not supported.\n",
1237 dev_name, fb->id);
1238 goto out_err0;
1239 }
1240
1241 /* default to 8 bpp on most graphic chips */
1242 bpp = 8;
1243 xres = sti_onscreen_x(fb->sti);
1244 yres = sti_onscreen_y(fb->sti);
1245
1246 ngleGetDeviceRomData(fb);
1247
1248 /* get (virtual) io region base addr */
1249 fix->mmio_start = REGION_BASE(fb,2);
1250 fix->mmio_len = 0x400000;
1251
1252 /* Reject any device not in the NGLE family */
1253 switch (fb->id) {
1254 case S9000_ID_A1659A: /* CRX/A1659A */
1255 break;
1256 case S9000_ID_ELM: /* GRX, grayscale but else same as A1659A */
1257 var->grayscale = 1;
1258 fb->id = S9000_ID_A1659A;
1259 break;
1260 case S9000_ID_TIMBER: /* HP9000/710 Any (may be a grayscale device) */
1261 if (strstr(dev_name, "GRAYSCALE") ||
1262 strstr(dev_name, "Grayscale") ||
1263 strstr(dev_name, "grayscale"))
1264 var->grayscale = 1;
1265 break;
1266 case S9000_ID_TOMCAT: /* Dual CRX, behaves else like a CRX */
1267 /* FIXME: TomCat supports two heads:
1268 * fb.iobase = REGION_BASE(fb_info,3);
1269 * fb.screen_base = ioremap(REGION_BASE(fb_info,2),xxx);
1270 * for now we only support the left one ! */
1271 xres = fb->ngle_rom.x_size_visible;
1272 yres = fb->ngle_rom.y_size_visible;
1273 fb->id = S9000_ID_A1659A;
1274 break;
1275 case S9000_ID_A1439A: /* CRX24/A1439A */
1276 bpp = 32;
1277 break;
1278 case S9000_ID_HCRX: /* Hyperdrive/HCRX */
1279 memset(&fb->ngle_rom, 0, sizeof(fb->ngle_rom));
1280 if ((fb->sti->regions_phys[0] & 0xfc000000) ==
1281 (fb->sti->regions_phys[2] & 0xfc000000))
1282 sti_rom_address = F_EXTEND(fb->sti->regions_phys[0]);
1283 else
1284 sti_rom_address = F_EXTEND(fb->sti->regions_phys[1]);
1285
1286 fb->deviceSpecificConfig = gsc_readl(sti_rom_address);
1287 if (IS_24_DEVICE(fb)) {
1288 if (bpp_pref == 8 || bpp_pref == 32)
1289 bpp = bpp_pref;
1290 else
1291 bpp = 32;
1292 } else
1293 bpp = 8;
1294 READ_WORD(fb, REG_15);
1295 SETUP_HW(fb);
1296 break;
1297 case CRT_ID_VISUALIZE_EG:
1298 case S9000_ID_ARTIST: /* Artist */
1299 break;
1300 default:
1301 #ifdef FALLBACK_TO_1BPP
1302 printk(KERN_WARNING
1303 "stifb: Unsupported graphics card (id=0x%08x) "
1304 "- now trying 1bpp mode instead\n",
1305 fb->id);
1306 bpp = 1; /* default to 1 bpp */
1307 break;
1308 #else
1309 printk(KERN_WARNING
1310 "stifb: Unsupported graphics card (id=0x%08x) "
1311 "- skipping.\n",
1312 fb->id);
1313 goto out_err0;
1314 #endif
1315 }
1316
1317
1318 /* get framebuffer physical and virtual base addr & len (64bit ready) */
1319 fix->smem_start = F_EXTEND(fb->sti->regions_phys[1]);
1320 fix->smem_len = fb->sti->regions[1].region_desc.length * 4096;
1321
1322 fix->line_length = (fb->sti->glob_cfg->total_x * bpp) / 8;
1323 if (!fix->line_length)
1324 fix->line_length = 2048; /* default */
1325
1326 /* limit fbsize to max visible screen size */
1327 if (fix->smem_len > yres*fix->line_length)
1328 fix->smem_len = ALIGN(yres*fix->line_length, 4*1024*1024);
1329
1330 fix->accel = FB_ACCEL_NONE;
1331
1332 switch (bpp) {
1333 case 1:
1334 fix->type = FB_TYPE_PLANES; /* well, sort of */
1335 fix->visual = FB_VISUAL_MONO10;
1336 var->red.length = var->green.length = var->blue.length = 1;
1337 break;
1338 case 8:
1339 fix->type = FB_TYPE_PACKED_PIXELS;
1340 fix->visual = FB_VISUAL_PSEUDOCOLOR;
1341 var->red.length = var->green.length = var->blue.length = 8;
1342 break;
1343 case 32:
1344 fix->type = FB_TYPE_PACKED_PIXELS;
1345 fix->visual = FB_VISUAL_DIRECTCOLOR;
1346 var->red.length = var->green.length = var->blue.length = var->transp.length = 8;
1347 var->blue.offset = 0;
1348 var->green.offset = 8;
1349 var->red.offset = 16;
1350 var->transp.offset = 24;
1351 break;
1352 default:
1353 break;
1354 }
1355
1356 var->xres = var->xres_virtual = xres;
1357 var->yres = var->yres_virtual = yres;
1358 var->bits_per_pixel = bpp;
1359
1360 strcpy(fix->id, "stifb");
1361 info->fbops = &stifb_ops;
1362 info->screen_base = ioremap(REGION_BASE(fb,1), fix->smem_len);
1363 if (!info->screen_base) {
1364 printk(KERN_ERR "stifb: failed to map memory\n");
1365 goto out_err0;
1366 }
1367 info->screen_size = fix->smem_len;
1368 info->flags = FBINFO_HWACCEL_COPYAREA | FBINFO_HWACCEL_FILLRECT;
1369 info->pseudo_palette = &fb->pseudo_palette;
1370
1371 scnprintf(modestr, sizeof(modestr), "%dx%d-%d", xres, yres, bpp);
1372 fb_find_mode(&info->var, info, modestr, NULL, 0, NULL, bpp);
1373
1374 /* This has to be done !!! */
1375 if (fb_alloc_cmap(&info->cmap, NR_PALETTE, 0))
1376 goto out_err1;
1377 stifb_init_display(fb);
1378
1379 if (!request_mem_region(fix->smem_start, fix->smem_len, "stifb fb")) {
1380 printk(KERN_ERR "stifb: cannot reserve fb region 0x%04lx-0x%04lx\n",
1381 fix->smem_start, fix->smem_start+fix->smem_len);
1382 goto out_err2;
1383 }
1384
1385 if (!request_mem_region(fix->mmio_start, fix->mmio_len, "stifb mmio")) {
1386 printk(KERN_ERR "stifb: cannot reserve sti mmio region 0x%04lx-0x%04lx\n",
1387 fix->mmio_start, fix->mmio_start+fix->mmio_len);
1388 goto out_err3;
1389 }
1390
1391 /* save for primary gfx device detection & unregister_framebuffer() */
1392 if (register_framebuffer(fb->info) < 0)
1393 goto out_err4;
1394
1395 fb_info(fb->info, "%s %dx%d-%d frame buffer device, %s, id: %04x, mmio: 0x%04lx\n",
1396 fix->id,
1397 var->xres,
1398 var->yres,
1399 var->bits_per_pixel,
1400 dev_name,
1401 fb->id,
1402 fix->mmio_start);
1403
1404 dev_set_drvdata(sti->dev, info);
1405
1406 return 0;
1407
1408
1409 out_err4:
1410 release_mem_region(fix->mmio_start, fix->mmio_len);
1411 out_err3:
1412 release_mem_region(fix->smem_start, fix->smem_len);
1413 out_err2:
1414 fb_dealloc_cmap(&info->cmap);
1415 out_err1:
1416 iounmap(info->screen_base);
1417 out_err0:
1418 framebuffer_release(info);
1419 return -ENXIO;
1420 }
1421
1422 static int stifb_disabled __initdata;
1423
1424 int __init
1425 stifb_setup(char *options);
1426
stifb_init(void)1427 static int __init stifb_init(void)
1428 {
1429 struct sti_struct *sti;
1430 struct sti_struct *def_sti;
1431 int i;
1432
1433 #ifndef MODULE
1434 char *option = NULL;
1435
1436 if (fb_get_options("stifb", &option))
1437 return -ENODEV;
1438 stifb_setup(option);
1439 #endif
1440 if (stifb_disabled) {
1441 printk(KERN_INFO "stifb: disabled by \"stifb=off\" kernel parameter\n");
1442 return -ENXIO;
1443 }
1444
1445 def_sti = sti_get_rom(0);
1446 if (def_sti) {
1447 for (i = 1; i <= MAX_STI_ROMS; i++) {
1448 sti = sti_get_rom(i);
1449 if (!sti)
1450 break;
1451 if (sti == def_sti) {
1452 stifb_init_fb(sti, stifb_bpp_pref[i - 1]);
1453 break;
1454 }
1455 }
1456 }
1457
1458 for (i = 1; i <= MAX_STI_ROMS; i++) {
1459 sti = sti_get_rom(i);
1460 if (!sti)
1461 break;
1462 if (sti == def_sti)
1463 continue;
1464 stifb_init_fb(sti, stifb_bpp_pref[i - 1]);
1465 }
1466 return 0;
1467 }
1468
1469 /*
1470 * Cleanup
1471 */
1472
1473 static void __exit
stifb_cleanup(void)1474 stifb_cleanup(void)
1475 {
1476 struct sti_struct *sti;
1477 int i;
1478
1479 for (i = 1; i <= MAX_STI_ROMS; i++) {
1480 sti = sti_get_rom(i);
1481 if (!sti)
1482 break;
1483 if (sti->dev) {
1484 struct fb_info *info = dev_get_drvdata(sti->dev);
1485
1486 if (!info)
1487 continue;
1488 unregister_framebuffer(info);
1489 release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
1490 release_mem_region(info->fix.smem_start, info->fix.smem_len);
1491 if (info->screen_base)
1492 iounmap(info->screen_base);
1493 fb_dealloc_cmap(&info->cmap);
1494 framebuffer_release(info);
1495 dev_set_drvdata(sti->dev, NULL);
1496 }
1497 }
1498 }
1499
1500 int __init
stifb_setup(char * options)1501 stifb_setup(char *options)
1502 {
1503 int i;
1504
1505 if (!options || !*options)
1506 return 1;
1507
1508 if (strncmp(options, "off", 3) == 0) {
1509 stifb_disabled = 1;
1510 options += 3;
1511 }
1512
1513 if (strncmp(options, "bpp", 3) == 0) {
1514 options += 3;
1515 for (i = 0; i < MAX_STI_ROMS; i++) {
1516 if (*options++ != ':')
1517 break;
1518 stifb_bpp_pref[i] = simple_strtoul(options, &options, 10);
1519 }
1520 }
1521 return 1;
1522 }
1523
1524 __setup("stifb=", stifb_setup);
1525
1526 module_init(stifb_init);
1527 module_exit(stifb_cleanup);
1528
1529 MODULE_AUTHOR("Helge Deller <deller@gmx.de>, Thomas Bogendoerfer <tsbogend@alpha.franken.de>");
1530 MODULE_DESCRIPTION("Framebuffer driver for HP's NGLE series graphics cards in HP PARISC machines");
1531 MODULE_LICENSE("GPL v2");
1532