xref: /linux/arch/arm/boot/dts/unisoc/rda8810pl.dtsi (revision cdd5b5a9761fd66d17586e4f4ba6588c70e640ea)
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * RDA8810PL SoC
4 *
5 * Copyright (c) 2017 Andreas Färber
6 * Copyright (c) 2018 Manivannan Sadhasivam
7 */
8
9#include <dt-bindings/interrupt-controller/irq.h>
10
11/ {
12	compatible = "rda,8810pl";
13	interrupt-parent = <&intc>;
14	#address-cells = <1>;
15	#size-cells = <1>;
16
17	cpus {
18		#address-cells = <1>;
19		#size-cells = <0>;
20
21		cpu@0 {
22			device_type = "cpu";
23			compatible = "arm,cortex-a5";
24			reg = <0x0>;
25		};
26	};
27
28	sram@100000 {
29		compatible = "mmio-sram";
30		reg = <0x100000 0x10000>;
31		#address-cells = <1>;
32		#size-cells = <1>;
33		ranges;
34	};
35
36	modem@10000000 {
37		compatible = "simple-bus";
38		#address-cells = <1>;
39		#size-cells = <1>;
40		ranges = <0x0 0x10000000 0xfffffff>;
41
42		gpioc@1a08000 {
43			compatible = "rda,8810pl-gpio";
44			reg = <0x1a08000 0x1000>;
45			gpio-controller;
46			#gpio-cells = <2>;
47			ngpios = <32>;
48		};
49	};
50
51	apb@20800000 {
52		compatible = "simple-bus";
53		#address-cells = <1>;
54		#size-cells = <1>;
55		ranges = <0x0 0x20800000 0x100000>;
56
57		intc: interrupt-controller@0 {
58			compatible = "rda,8810pl-intc";
59			reg = <0x0 0x1000>;
60			interrupt-controller;
61			#interrupt-cells = <2>;
62		};
63	};
64
65	apb@20900000 {
66		compatible = "simple-bus";
67		#address-cells = <1>;
68		#size-cells = <1>;
69		ranges = <0x0 0x20900000 0x100000>;
70
71		timer@10000 {
72			compatible = "rda,8810pl-timer";
73			reg = <0x10000 0x1000>;
74			interrupts = <16 IRQ_TYPE_LEVEL_HIGH>,
75				     <17 IRQ_TYPE_LEVEL_HIGH>;
76			interrupt-names = "hwtimer", "ostimer";
77		};
78
79		gpioa@30000 {
80			compatible = "rda,8810pl-gpio";
81			reg = <0x30000 0x1000>;
82			gpio-controller;
83			#gpio-cells = <2>;
84			ngpios = <32>;
85			interrupt-controller;
86			#interrupt-cells = <2>;
87			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
88		};
89
90		gpiob@31000 {
91			compatible = "rda,8810pl-gpio";
92			reg = <0x31000 0x1000>;
93			gpio-controller;
94			#gpio-cells = <2>;
95			ngpios = <32>;
96			interrupt-controller;
97			#interrupt-cells = <2>;
98			interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
99		};
100
101		gpiod@32000 {
102			compatible = "rda,8810pl-gpio";
103			reg = <0x32000 0x1000>;
104			gpio-controller;
105			#gpio-cells = <2>;
106			ngpios = <32>;
107			interrupt-controller;
108			#interrupt-cells = <2>;
109			interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
110		};
111	};
112
113	apb@20a00000 {
114		compatible = "simple-bus";
115		#address-cells = <1>;
116		#size-cells = <1>;
117		ranges = <0x0 0x20a00000 0x100000>;
118
119		uart1: serial@0 {
120			compatible = "rda,8810pl-uart";
121			reg = <0x0 0x1000>;
122			interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
123			status = "disabled";
124		};
125
126		uart2: serial@10000 {
127			compatible = "rda,8810pl-uart";
128			reg = <0x10000 0x1000>;
129			interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
130			status = "disabled";
131		};
132
133		uart3: serial@90000 {
134			compatible = "rda,8810pl-uart";
135			reg = <0x90000 0x1000>;
136			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
137			status = "disabled";
138		};
139	};
140
141	l2: cache-controller@21100000 {
142		compatible = "arm,pl310-cache";
143		reg = <0x21100000 0x1000>;
144		cache-unified;
145		cache-level = <2>;
146	};
147};
148