1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Copyright (C) 2016 PHYTEC Messtechnik GmbH 4 * Author: Christian Hemp <c.hemp@phytec.de> 5 */ 6 7#include <dt-bindings/gpio/gpio.h> 8#include <dt-bindings/interrupt-controller/irq.h> 9#include <dt-bindings/pwm/pwm.h> 10 11/ { 12 model = "PHYTEC phyCORE-i.MX6 UltraLite"; 13 compatible = "phytec,imx6ul-pcl063", "fsl,imx6ul"; 14 15 chosen { 16 stdout-path = &uart1; 17 }; 18 19 /* 20 * Set the minimum memory size here and 21 * let the bootloader set the real size. 22 */ 23 memory@80000000 { 24 device_type = "memory"; 25 reg = <0x80000000 0x8000000>; 26 }; 27 28 gpio_leds_som: leds { 29 pinctrl-names = "default"; 30 pinctrl-0 = <&pinctrl_gpioleds_som>; 31 compatible = "gpio-leds"; 32 33 led-phycore-green { 34 gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; 35 linux,default-trigger = "heartbeat"; 36 }; 37 }; 38}; 39 40&fec1 { 41 pinctrl-names = "default"; 42 pinctrl-0 = <&pinctrl_enet1>; 43 phy-mode = "rmii"; 44 phy-handle = <ðphy1>; 45 status = "disabled"; 46 47 mdio: mdio { 48 #address-cells = <1>; 49 #size-cells = <0>; 50 51 ethphy1: ethernet-phy@1 { 52 reg = <1>; 53 interrupt-parent = <&gpio1>; 54 interrupts = <2 IRQ_TYPE_LEVEL_LOW>; 55 micrel,led-mode = <1>; 56 clocks = <&clks IMX6UL_CLK_ENET_REF>; 57 clock-names = "rmii-ref"; 58 status = "disabled"; 59 }; 60 }; 61}; 62 63&gpmi { 64 pinctrl-names = "default"; 65 pinctrl-0 = <&pinctrl_gpmi_nand>; 66 nand-on-flash-bbt; 67 status = "disabled"; 68}; 69 70&i2c1 { 71 pinctrl-names = "default", "gpio"; 72 pinctrl-0 = <&pinctrl_i2c1>; 73 pinctrl-1 = <&pinctrl_i2c1_gpio>; 74 scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 75 sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 76 clock-frequency = <100000>; 77 status = "okay"; 78 79 eeprom@52 { 80 compatible = "catalyst,24c32", "atmel,24c32"; 81 pagesize = <32>; 82 reg = <0x52>; 83 }; 84}; 85 86&snvs_poweroff { 87 status = "okay"; 88}; 89 90&uart1 { 91 pinctrl-names = "default"; 92 pinctrl-0 = <&pinctrl_uart1>; 93 status = "okay"; 94}; 95 96&usdhc2 { 97 pinctrl-names = "default"; 98 pinctrl-0 = <&pinctrl_usdhc2>; 99 bus-width = <8>; 100 no-1-8-v; 101 non-removable; 102 status = "disabled"; 103}; 104 105&wdog1 { 106 fsl,suspend-in-wait; 107}; 108 109&iomuxc { 110 pinctrl_enet1: enet1grp { 111 fsl,pins = < 112 MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x10010 113 MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x10010 114 MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 115 MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 116 MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 117 MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 118 MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b010 119 MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b010 120 MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b010 121 MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b010 122 MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x17059 123 >; 124 }; 125 126 pinctrl_gpioleds_som: gpioledssomgrp { 127 fsl,pins = <MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x0b0b0>; 128 }; 129 130 pinctrl_gpmi_nand: gpminandgrp { 131 fsl,pins = < 132 MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0x0b0b1 133 MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0x0b0b1 134 MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0x0b0b1 135 MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0x0b000 136 MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0x0b0b1 137 MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0x0b0b1 138 MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0x0b0b1 139 MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x0b0b1 140 MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0x0b0b1 141 MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0x0b0b1 142 MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0x0b0b1 143 MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0x0b0b1 144 MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0x0b0b1 145 MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0x0b0b1 146 MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0x0b0b1 147 >; 148 }; 149 150 pinctrl_i2c1: i2cgrp { 151 fsl,pins = < 152 MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 153 MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 154 >; 155 }; 156 157 pinctrl_i2c1_gpio: i2cgpiogrp { 158 fsl,pins = < 159 MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x4001b8b0 160 MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x4001b8b0 161 >; 162 }; 163 164 pinctrl_uart1: uart1grp { 165 fsl,pins = < 166 MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 167 MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 168 >; 169 }; 170 171 pinctrl_usdhc2: usdhc2grp { 172 fsl,pins = < 173 MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9 174 MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9 175 MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9 176 MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9 177 MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9 178 MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9 179 MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170f9 180 MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170f9 181 MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170f9 182 MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170f9 183 >; 184 }; 185 186}; 187