xref: /linux/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6b.dtsi (revision 3a39d672e7f48b8d6b91a09afa4b55352773b4b5) 
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright 2013 Sascha Hauer, Pengutronix
4 * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
5 */
6
7#include <dt-bindings/gpio/gpio.h>
8
9&i2c3 {
10	pinctrl-names = "default", "gpio";
11	pinctrl-0 = <&pinctrl_i2c3>;
12	pinctrl-1 = <&pinctrl_i2c3_recovery>;
13	scl-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
14	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
15	clock-frequency = <100000>;
16	status = "okay";
17
18	pmic: pmic@8 {
19		compatible = "fsl,pfuze100";
20		reg = <0x08>;
21	};
22
23	temperature-sensor@48 {
24		compatible = "national,lm75a";
25		reg = <0x48>;
26		vs-supply = <&reg_3p3v>;
27	};
28
29	eeprom@50 {
30		compatible = "st,24c64", "atmel,24c64";
31		reg = <0x50>;
32		pagesize = <32>;
33		vcc-supply = <&reg_3p3v>;
34	};
35};
36
37&iomuxc {
38	pinctrl_i2c3: i2c3grp {
39		fsl,pins = <
40			MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b899
41			MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899
42		>;
43	};
44
45	pinctrl_i2c3_recovery: i2c3recoverygrp {
46		fsl,pins = <
47			MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x4001b899
48			MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b899
49		>;
50	};
51};
52