xref: /linux/tools/testing/selftests/drivers/net/hw/ethtool.sh (revision 621cde16e49b3ecf7d59a8106a20aaebfb4a59a9)
1#!/bin/bash
2# SPDX-License-Identifier: GPL-2.0
3
4ALL_TESTS="
5	same_speeds_autoneg_off
6	different_speeds_autoneg_off
7	combination_of_neg_on_and_off
8	advertise_subset_of_speeds
9	check_highest_speed_is_chosen
10	different_speeds_autoneg_on
11"
12NUM_NETIFS=2
13lib_dir=$(dirname "$0")
14source "$lib_dir"/../../../net/forwarding/lib.sh
15source ethtool_lib.sh
16
17h1_create()
18{
19	simple_if_init $h1 192.0.2.1/24
20}
21
22h1_destroy()
23{
24	simple_if_fini $h1 192.0.2.1/24
25}
26
27h2_create()
28{
29	simple_if_init $h2 192.0.2.2/24
30}
31
32h2_destroy()
33{
34	simple_if_fini $h2 192.0.2.2/24
35}
36
37setup_prepare()
38{
39	h1=${NETIFS[p1]}
40	h2=${NETIFS[p2]}
41
42	h1_create
43	h2_create
44}
45
46cleanup()
47{
48	pre_cleanup
49
50	h2_destroy
51	h1_destroy
52}
53
54same_speeds_autoneg_off()
55{
56	# Check that when each of the reported speeds is forced, the links come
57	# up and are operational.
58	local -a speeds_arr=($(common_speeds_get $h1 $h2 0 0))
59
60	for speed in "${speeds_arr[@]}"; do
61		RET=0
62		ethtool_set $h1 speed $speed autoneg off
63		ethtool_set $h2 speed $speed autoneg off
64
65		setup_wait_dev_with_timeout $h1
66		setup_wait_dev_with_timeout $h2
67		ping_do $h1 192.0.2.2
68		check_err $? "ping with speed $speed autoneg off"
69		log_test "force speed $speed on both ends"
70	done
71
72	ethtool -s $h2 autoneg on
73	ethtool -s $h1 autoneg on
74}
75
76different_speeds_autoneg_off()
77{
78	# Test that when we force different speeds, links are not up and ping
79	# fails.
80	RET=0
81
82	local -a speeds_arr=($(different_speeds_get $h1 $h2 0 0))
83	local speed1=${speeds_arr[0]}
84	local speed2=${speeds_arr[1]}
85
86	ethtool_set $h1 speed $speed1 autoneg off
87	ethtool_set $h2 speed $speed2 autoneg off
88
89	setup_wait_dev_with_timeout $h1
90	setup_wait_dev_with_timeout $h2
91	ping_do $h1 192.0.2.2
92	check_fail $? "ping with different speeds"
93
94	log_test "force of different speeds autoneg off"
95
96	ethtool -s $h2 autoneg on
97	ethtool -s $h1 autoneg on
98}
99
100combination_of_neg_on_and_off()
101{
102	# Test that when one device is forced to a speed supported by both
103	# endpoints and the other device is configured to autoneg on, the links
104	# are up and ping passes.
105	local -a speeds_arr=($(common_speeds_get $h1 $h2 0 1))
106
107	for speed in "${speeds_arr[@]}"; do
108		RET=0
109		ethtool_set $h1 speed $speed autoneg off
110
111		setup_wait_dev_with_timeout $h1
112		setup_wait_dev_with_timeout $h2
113		ping_do $h1 192.0.2.2
114		check_err $? "ping with h1-speed=$speed autoneg off, h2 autoneg on"
115		log_test "force speed $speed vs. autoneg"
116	done
117
118	ethtool -s $h1 autoneg on
119}
120
121hex_speed_value_get()
122{
123	local speed=$1; shift
124
125	local shift_size=${speed_values[$speed]}
126	speed=$((0x1 << $"shift_size"))
127	printf "%#x" "$speed"
128}
129
130subset_of_common_speeds_get()
131{
132	local dev1=$1; shift
133	local dev2=$1; shift
134	local adver=$1; shift
135
136	local -a speeds_arr=($(common_speeds_get $dev1 $dev2 0 $adver))
137	local speed_to_advertise=0
138	local speed_to_remove=${speeds_arr[0]}
139	speed_to_remove+='base'
140
141	local -a speeds_mode_arr=($(common_speeds_get $dev1 $dev2 1 $adver))
142
143	for speed in ${speeds_mode_arr[@]}; do
144		if [[ $speed != $speed_to_remove* ]]; then
145			speed=$(hex_speed_value_get $speed)
146			speed_to_advertise=$(($speed_to_advertise | \
147						$speed))
148		fi
149
150	done
151
152	# Convert to hex.
153	printf "%#x" "$speed_to_advertise"
154}
155
156speed_to_advertise_get()
157{
158	# The function returns the hex number that is composed by OR-ing all
159	# the modes corresponding to the provided speed.
160	local speed_without_mode=$1; shift
161	local supported_speeds=("$@"); shift
162	local speed_to_advertise=0
163
164	speed_without_mode+='base'
165
166	for speed in ${supported_speeds[@]}; do
167		if [[ $speed == $speed_without_mode* ]]; then
168			speed=$(hex_speed_value_get $speed)
169			speed_to_advertise=$(($speed_to_advertise | \
170						$speed))
171		fi
172
173	done
174
175	# Convert to hex.
176	printf "%#x" "$speed_to_advertise"
177}
178
179advertise_subset_of_speeds()
180{
181	# Test that when one device advertises a subset of speeds and another
182	# advertises a specific speed (but all modes of this speed), the links
183	# are up and ping passes.
184	RET=0
185
186	local speed_1_to_advertise=$(subset_of_common_speeds_get $h1 $h2 1)
187	ethtool_set $h1 advertise $speed_1_to_advertise
188
189	if [ $RET != 0 ]; then
190		log_test "advertise subset of speeds"
191		return
192	fi
193
194	local -a speeds_arr_without_mode=($(common_speeds_get $h1 $h2 0 1))
195	# Check only speeds that h1 advertised. Remove the first speed.
196	unset speeds_arr_without_mode[0]
197	local -a speeds_arr_with_mode=($(common_speeds_get $h1 $h2 1 1))
198
199	for speed_value in ${speeds_arr_without_mode[@]}; do
200		RET=0
201		local speed_2_to_advertise=$(speed_to_advertise_get $speed_value \
202			"${speeds_arr_with_mode[@]}")
203		ethtool_set $h2 advertise $speed_2_to_advertise
204
205		setup_wait_dev_with_timeout $h1
206		setup_wait_dev_with_timeout $h2
207		ping_do $h1 192.0.2.2
208		check_err $? "ping with h1=$speed_1_to_advertise, h2=$speed_2_to_advertise ($speed_value)"
209
210		log_test "advertise $speed_1_to_advertise vs. $speed_2_to_advertise"
211	done
212
213	ethtool -s $h2 autoneg on
214	ethtool -s $h1 autoneg on
215}
216
217check_highest_speed_is_chosen()
218{
219	# Test that when one device advertises a subset of speeds, the other
220	# chooses the highest speed. This test checks configuration without
221	# traffic.
222	RET=0
223
224	local max_speed
225	local chosen_speed
226	local speed_to_advertise=$(subset_of_common_speeds_get $h1 $h2 1)
227
228	ethtool_set $h1 advertise $speed_to_advertise
229
230	if [ $RET != 0 ]; then
231		log_test "check highest speed"
232		return
233	fi
234
235	local -a speeds_arr=($(common_speeds_get $h1 $h2 0 1))
236
237	max_speed=${speeds_arr[0]}
238	for current in ${speeds_arr[@]}; do
239		if [[ $current -gt $max_speed ]]; then
240			max_speed=$current
241		fi
242	done
243
244	setup_wait_dev_with_timeout $h1
245	setup_wait_dev_with_timeout $h2
246	chosen_speed=$(ethtool $h1 | grep 'Speed:')
247	chosen_speed=${chosen_speed%"Mb/s"*}
248	chosen_speed=${chosen_speed#*"Speed: "}
249	((chosen_speed == max_speed))
250	check_err $? "h1 advertise $speed_to_advertise, h2 sync to speed $chosen_speed"
251
252	log_test "check highest speed"
253
254	ethtool -s $h2 autoneg on
255	ethtool -s $h1 autoneg on
256}
257
258different_speeds_autoneg_on()
259{
260	# Test that when we configure links to advertise different speeds,
261	# links are not up and ping fails.
262	RET=0
263
264	local -a speeds=($(different_speeds_get $h1 $h2 1 1))
265	local speed1=${speeds[0]}
266	local speed2=${speeds[1]}
267
268	speed1=$(hex_speed_value_get $speed1)
269	speed2=$(hex_speed_value_get $speed2)
270
271	ethtool_set $h1 advertise $speed1
272	ethtool_set $h2 advertise $speed2
273
274	if (($RET)); then
275		setup_wait_dev_with_timeout $h1
276		setup_wait_dev_with_timeout $h2
277		ping_do $h1 192.0.2.2
278		check_fail $? "ping with different speeds autoneg on"
279	fi
280
281	log_test "advertise different speeds autoneg on"
282
283	ethtool -s $h2 autoneg on
284	ethtool -s $h1 autoneg on
285}
286
287trap cleanup EXIT
288
289setup_prepare
290setup_wait
291
292declare -gA speed_values
293eval "speed_values=($(speeds_arr_get))"
294
295tests_run
296
297exit $EXIT_STATUS
298