xref: /linux/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson1.c (revision 8be4d31cb8aaeea27bde4b7ddb26e28a89062ebf)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Loongson-1 DWMAC glue layer
4  *
5  * Copyright (C) 2011-2023 Keguang Zhang <keguang.zhang@gmail.com>
6  */
7 
8 #include <linux/mfd/syscon.h>
9 #include <linux/module.h>
10 #include <linux/of.h>
11 #include <linux/phy.h>
12 #include <linux/platform_device.h>
13 #include <linux/regmap.h>
14 
15 #include "stmmac.h"
16 #include "stmmac_platform.h"
17 
18 #define LS1B_GMAC0_BASE		(0x1fe10000)
19 #define LS1B_GMAC1_BASE		(0x1fe20000)
20 
21 /* Loongson-1 SYSCON Registers */
22 #define LS1X_SYSCON0		(0x0)
23 #define LS1X_SYSCON1		(0x4)
24 
25 /* Loongson-1B SYSCON Register Bits */
26 #define GMAC1_USE_UART1		BIT(4)
27 #define GMAC1_USE_UART0		BIT(3)
28 
29 #define GMAC1_SHUT		BIT(13)
30 #define GMAC0_SHUT		BIT(12)
31 
32 #define GMAC1_USE_TXCLK		BIT(3)
33 #define GMAC0_USE_TXCLK		BIT(2)
34 #define GMAC1_USE_PWM23		BIT(1)
35 #define GMAC0_USE_PWM01		BIT(0)
36 
37 /* Loongson-1C SYSCON Register Bits */
38 #define GMAC_SHUT		BIT(6)
39 
40 #define PHY_INTF_SELI		GENMASK(30, 28)
41 #define PHY_INTF_MII		FIELD_PREP(PHY_INTF_SELI, 0)
42 #define PHY_INTF_RMII		FIELD_PREP(PHY_INTF_SELI, 4)
43 
44 struct ls1x_dwmac {
45 	struct plat_stmmacenet_data *plat_dat;
46 	struct regmap *regmap;
47 	unsigned int id;
48 };
49 
50 struct ls1x_data {
51 	int (*setup)(struct platform_device *pdev,
52 		     struct plat_stmmacenet_data *plat_dat);
53 	int (*init)(struct platform_device *pdev, void *bsp_priv);
54 };
55 
ls1b_dwmac_setup(struct platform_device * pdev,struct plat_stmmacenet_data * plat_dat)56 static int ls1b_dwmac_setup(struct platform_device *pdev,
57 			    struct plat_stmmacenet_data *plat_dat)
58 {
59 	struct ls1x_dwmac *dwmac = plat_dat->bsp_priv;
60 	struct resource *res;
61 
62 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
63 	if (!res) {
64 		/* This shouldn't fail - stmmac_get_platform_resources()
65 		 * already mapped this resource.
66 		 */
67 		dev_err(&pdev->dev, "Could not get IO_MEM resources\n");
68 		return -EINVAL;
69 	}
70 
71 	if (res->start == LS1B_GMAC0_BASE) {
72 		dwmac->id = 0;
73 	} else if (res->start == LS1B_GMAC1_BASE) {
74 		dwmac->id = 1;
75 	} else {
76 		dev_err(&pdev->dev, "Invalid Ethernet MAC base address %pR",
77 			res);
78 		return -EINVAL;
79 	}
80 
81 	return 0;
82 }
83 
ls1b_dwmac_syscon_init(struct platform_device * pdev,void * priv)84 static int ls1b_dwmac_syscon_init(struct platform_device *pdev, void *priv)
85 {
86 	struct ls1x_dwmac *dwmac = priv;
87 	struct plat_stmmacenet_data *plat = dwmac->plat_dat;
88 	struct regmap *regmap = dwmac->regmap;
89 
90 	if (dwmac->id == 0) {
91 		switch (plat->phy_interface) {
92 		case PHY_INTERFACE_MODE_RGMII_ID:
93 			regmap_update_bits(regmap, LS1X_SYSCON0,
94 					   GMAC0_USE_TXCLK | GMAC0_USE_PWM01,
95 					   0);
96 			break;
97 		case PHY_INTERFACE_MODE_MII:
98 			regmap_update_bits(regmap, LS1X_SYSCON0,
99 					   GMAC0_USE_TXCLK | GMAC0_USE_PWM01,
100 					   GMAC0_USE_TXCLK | GMAC0_USE_PWM01);
101 			break;
102 		default:
103 			dev_err(&pdev->dev, "Unsupported PHY mode %u\n",
104 				plat->phy_interface);
105 			return -EOPNOTSUPP;
106 		}
107 
108 		regmap_update_bits(regmap, LS1X_SYSCON0, GMAC0_SHUT, 0);
109 	} else if (dwmac->id == 1) {
110 		regmap_update_bits(regmap, LS1X_SYSCON0,
111 				   GMAC1_USE_UART1 | GMAC1_USE_UART0,
112 				   GMAC1_USE_UART1 | GMAC1_USE_UART0);
113 
114 		switch (plat->phy_interface) {
115 		case PHY_INTERFACE_MODE_RGMII_ID:
116 			regmap_update_bits(regmap, LS1X_SYSCON1,
117 					   GMAC1_USE_TXCLK | GMAC1_USE_PWM23,
118 					   0);
119 
120 			break;
121 		case PHY_INTERFACE_MODE_MII:
122 			regmap_update_bits(regmap, LS1X_SYSCON1,
123 					   GMAC1_USE_TXCLK | GMAC1_USE_PWM23,
124 					   GMAC1_USE_TXCLK | GMAC1_USE_PWM23);
125 			break;
126 		default:
127 			dev_err(&pdev->dev, "Unsupported PHY mode %u\n",
128 				plat->phy_interface);
129 			return -EOPNOTSUPP;
130 		}
131 
132 		regmap_update_bits(regmap, LS1X_SYSCON1, GMAC1_SHUT, 0);
133 	}
134 
135 	return 0;
136 }
137 
ls1c_dwmac_syscon_init(struct platform_device * pdev,void * priv)138 static int ls1c_dwmac_syscon_init(struct platform_device *pdev, void *priv)
139 {
140 	struct ls1x_dwmac *dwmac = priv;
141 	struct plat_stmmacenet_data *plat = dwmac->plat_dat;
142 	struct regmap *regmap = dwmac->regmap;
143 
144 	switch (plat->phy_interface) {
145 	case PHY_INTERFACE_MODE_MII:
146 		regmap_update_bits(regmap, LS1X_SYSCON1, PHY_INTF_SELI,
147 				   PHY_INTF_MII);
148 		break;
149 	case PHY_INTERFACE_MODE_RMII:
150 		regmap_update_bits(regmap, LS1X_SYSCON1, PHY_INTF_SELI,
151 				   PHY_INTF_RMII);
152 		break;
153 	default:
154 		dev_err(&pdev->dev, "Unsupported PHY-mode %u\n",
155 			plat->phy_interface);
156 		return -EOPNOTSUPP;
157 	}
158 
159 	regmap_update_bits(regmap, LS1X_SYSCON0, GMAC0_SHUT, 0);
160 
161 	return 0;
162 }
163 
ls1x_dwmac_probe(struct platform_device * pdev)164 static int ls1x_dwmac_probe(struct platform_device *pdev)
165 {
166 	struct plat_stmmacenet_data *plat_dat;
167 	struct stmmac_resources stmmac_res;
168 	const struct ls1x_data *data;
169 	struct regmap *regmap;
170 	struct ls1x_dwmac *dwmac;
171 	int ret;
172 
173 	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
174 	if (ret)
175 		return ret;
176 
177 	/* Probe syscon */
178 	regmap = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
179 						 "loongson,ls1-syscon");
180 	if (IS_ERR(regmap))
181 		return dev_err_probe(&pdev->dev, PTR_ERR(regmap),
182 				     "Unable to find syscon\n");
183 
184 	data = of_device_get_match_data(&pdev->dev);
185 	if (!data) {
186 		dev_err(&pdev->dev, "No of match data provided\n");
187 		return -EINVAL;
188 	}
189 
190 	dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL);
191 	if (!dwmac)
192 		return -ENOMEM;
193 
194 	plat_dat = devm_stmmac_probe_config_dt(pdev, stmmac_res.mac);
195 	if (IS_ERR(plat_dat))
196 		return dev_err_probe(&pdev->dev, PTR_ERR(plat_dat),
197 				     "dt configuration failed\n");
198 
199 	plat_dat->bsp_priv = dwmac;
200 	plat_dat->init = data->init;
201 	dwmac->plat_dat = plat_dat;
202 	dwmac->regmap = regmap;
203 
204 	if (data->setup) {
205 		ret = data->setup(pdev, plat_dat);
206 		if (ret)
207 			return ret;
208 	}
209 
210 	return devm_stmmac_pltfr_probe(pdev, plat_dat, &stmmac_res);
211 }
212 
213 static const struct ls1x_data ls1b_dwmac_data = {
214 	.setup = ls1b_dwmac_setup,
215 	.init = ls1b_dwmac_syscon_init,
216 };
217 
218 static const struct ls1x_data ls1c_dwmac_data = {
219 	.init = ls1c_dwmac_syscon_init,
220 };
221 
222 static const struct of_device_id ls1x_dwmac_match[] = {
223 	{
224 		.compatible = "loongson,ls1b-gmac",
225 		.data = &ls1b_dwmac_data,
226 	},
227 	{
228 		.compatible = "loongson,ls1c-emac",
229 		.data = &ls1c_dwmac_data,
230 	},
231 	{ }
232 };
233 MODULE_DEVICE_TABLE(of, ls1x_dwmac_match);
234 
235 static struct platform_driver ls1x_dwmac_driver = {
236 	.probe = ls1x_dwmac_probe,
237 	.driver = {
238 		.name = "loongson1-dwmac",
239 		.of_match_table = ls1x_dwmac_match,
240 	},
241 };
242 module_platform_driver(ls1x_dwmac_driver);
243 
244 MODULE_AUTHOR("Keguang Zhang <keguang.zhang@gmail.com>");
245 MODULE_DESCRIPTION("Loongson-1 DWMAC glue layer");
246 MODULE_LICENSE("GPL");
247