1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT 2/* 3 * Author: Arınç ÜNAL <arinc.unal@arinc9.com> 4 */ 5 6#include "bcm47094.dtsi" 7#include "bcm5301x-nand-cs0-bch8.dtsi" 8 9#include <dt-bindings/leds/common.h> 10 11/ { 12 memory@0 { 13 reg = <0x00000000 0x08000000>, 14 <0x88000000 0x18000000>; 15 device_type = "memory"; 16 }; 17 18 nvram@1c080000 { 19 compatible = "brcm,nvram"; 20 reg = <0x1c080000 0x00180000>; 21 }; 22 23 gpio-keys { 24 compatible = "gpio-keys"; 25 26 button-led { 27 label = "Backlight"; 28 linux,code = <KEY_BRIGHTNESS_ZERO>; 29 gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; 30 }; 31 32 button-reset { 33 label = "Reset"; 34 linux,code = <KEY_RESTART>; 35 gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; 36 }; 37 38 button-wifi { 39 label = "Wi-Fi"; 40 linux,code = <KEY_RFKILL>; 41 gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; 42 }; 43 44 button-wps { 45 label = "WPS"; 46 linux,code = <KEY_WPS_BUTTON>; 47 gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>; 48 }; 49 }; 50 51 leds { 52 compatible = "gpio-leds"; 53 54 led-lan { 55 color = <LED_COLOR_ID_WHITE>; 56 function = LED_FUNCTION_LAN; 57 gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>; 58 }; 59 60 led-power { 61 color = <LED_COLOR_ID_WHITE>; 62 function = LED_FUNCTION_POWER; 63 gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; 64 linux,default-trigger = "default-on"; 65 }; 66 67 led-usb2 { 68 color = <LED_COLOR_ID_WHITE>; 69 function = LED_FUNCTION_USB; 70 function-enumerator = <1>; 71 gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; 72 trigger-sources = <&ehci_port2>; 73 linux,default-trigger = "usbport"; 74 }; 75 76 led-usb3 { 77 color = <LED_COLOR_ID_WHITE>; 78 function = LED_FUNCTION_USB; 79 function-enumerator = <2>; 80 gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; 81 trigger-sources = <&ehci_port1>, <&xhci_port1>; 82 linux,default-trigger = "usbport"; 83 }; 84 85 led-wan-red { 86 color = <LED_COLOR_ID_RED>; 87 function = LED_FUNCTION_WAN; 88 gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; 89 }; 90 91 led-wps { 92 color = <LED_COLOR_ID_WHITE>; 93 function = LED_FUNCTION_WPS; 94 gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>; 95 }; 96 }; 97}; 98 99&nandcs { 100 partitions { 101 compatible = "fixed-partitions"; 102 #address-cells = <1>; 103 #size-cells = <1>; 104 105 partition@0 { 106 reg = <0x00000000 0x00080000>; 107 label = "boot"; 108 read-only; 109 }; 110 111 partition@80000 { 112 reg = <0x00080000 0x00180000>; 113 label = "nvram"; 114 }; 115 116 partition@200000 { 117 compatible = "brcm,trx"; 118 reg = <0x00200000 0x07e00000>; 119 label = "firmware"; 120 }; 121 }; 122}; 123 124&srab { 125 status = "okay"; 126 127 ports { 128 port@0 { 129 label = "lan4"; 130 }; 131 132 port@1 { 133 label = "lan3"; 134 }; 135 136 port@2 { 137 label = "lan2"; 138 }; 139 140 port@3 { 141 label = "lan1"; 142 }; 143 144 port@4 { 145 label = "wan"; 146 }; 147 148 port@5 { 149 label = "cpu"; 150 }; 151 152 port@7 { 153 label = "cpu"; 154 }; 155 156 port@8 { 157 label = "cpu"; 158 }; 159 }; 160}; 161 162&usb2 { 163 vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; 164}; 165 166&usb3_phy { 167 status = "okay"; 168}; 169