xref: /linux/tools/include/nolibc/arch-arm.h (revision 3a39d672e7f48b8d6b91a09afa4b55352773b4b5)
1 /* SPDX-License-Identifier: LGPL-2.1 OR MIT */
2 /*
3  * ARM specific definitions for NOLIBC
4  * Copyright (C) 2017-2022 Willy Tarreau <w@1wt.eu>
5  */
6 
7 #ifndef _NOLIBC_ARCH_ARM_H
8 #define _NOLIBC_ARCH_ARM_H
9 
10 #include "compiler.h"
11 #include "crt.h"
12 
13 /* Syscalls for ARM in ARM or Thumb modes :
14  *   - registers are 32-bit
15  *   - stack is 8-byte aligned
16  *     ( http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.faqs/ka4127.html)
17  *   - syscall number is passed in r7
18  *   - arguments are in r0, r1, r2, r3, r4, r5
19  *   - the system call is performed by calling svc #0
20  *   - syscall return comes in r0.
21  *   - only lr is clobbered.
22  *   - the arguments are cast to long and assigned into the target registers
23  *     which are then simply passed as registers to the asm code, so that we
24  *     don't have to experience issues with register constraints.
25  *   - the syscall number is always specified last in order to allow to force
26  *     some registers before (gcc refuses a %-register at the last position).
27  *   - in thumb mode without -fomit-frame-pointer, r7 is also used to store the
28  *     frame pointer, and we cannot directly assign it as a register variable,
29  *     nor can we clobber it. Instead we assign the r6 register and swap it
30  *     with r7 before calling svc, and r6 is marked as clobbered.
31  *     We're just using any regular register which we assign to r7 after saving
32  *     it.
33  *
34  * Also, ARM supports the old_select syscall if newselect is not available
35  */
36 #define __ARCH_WANT_SYS_OLD_SELECT
37 
38 #if (defined(__THUMBEB__) || defined(__THUMBEL__)) && \
39     !defined(NOLIBC_OMIT_FRAME_POINTER)
40 /* swap r6,r7 needed in Thumb mode since we can't use nor clobber r7 */
41 #define _NOLIBC_SYSCALL_REG         "r6"
42 #define _NOLIBC_THUMB_SET_R7        "eor r7, r6\neor r6, r7\neor r7, r6\n"
43 #define _NOLIBC_THUMB_RESTORE_R7    "mov r7, r6\n"
44 
45 #else  /* we're in ARM mode */
46 /* in Arm mode we can directly use r7 */
47 #define _NOLIBC_SYSCALL_REG         "r7"
48 #define _NOLIBC_THUMB_SET_R7        ""
49 #define _NOLIBC_THUMB_RESTORE_R7    ""
50 
51 #endif /* end THUMB */
52 
53 #define my_syscall0(num)                                                      \
54 ({                                                                            \
55 	register long _num  __asm__(_NOLIBC_SYSCALL_REG) = (num);             \
56 	register long _arg1 __asm__ ("r0");                                   \
57 									      \
58 	__asm__ volatile (                                                    \
59 		_NOLIBC_THUMB_SET_R7                                          \
60 		"svc #0\n"                                                    \
61 		_NOLIBC_THUMB_RESTORE_R7                                      \
62 		: "=r"(_arg1), "=r"(_num)                                     \
63 		: "r"(_arg1),                                                 \
64 		  "r"(_num)                                                   \
65 		: "memory", "cc", "lr"                                        \
66 	);                                                                    \
67 	_arg1;                                                                \
68 })
69 
70 #define my_syscall1(num, arg1)                                                \
71 ({                                                                            \
72 	register long _num  __asm__(_NOLIBC_SYSCALL_REG) = (num);             \
73 	register long _arg1 __asm__ ("r0") = (long)(arg1);                    \
74 									      \
75 	__asm__ volatile (                                                    \
76 		_NOLIBC_THUMB_SET_R7                                          \
77 		"svc #0\n"                                                    \
78 		_NOLIBC_THUMB_RESTORE_R7                                      \
79 		: "=r"(_arg1), "=r" (_num)                                    \
80 		: "r"(_arg1),                                                 \
81 		  "r"(_num)                                                   \
82 		: "memory", "cc", "lr"                                        \
83 	);                                                                    \
84 	_arg1;                                                                \
85 })
86 
87 #define my_syscall2(num, arg1, arg2)                                          \
88 ({                                                                            \
89 	register long _num  __asm__(_NOLIBC_SYSCALL_REG) = (num);             \
90 	register long _arg1 __asm__ ("r0") = (long)(arg1);                    \
91 	register long _arg2 __asm__ ("r1") = (long)(arg2);                    \
92 									      \
93 	__asm__ volatile (                                                    \
94 		_NOLIBC_THUMB_SET_R7                                          \
95 		"svc #0\n"                                                    \
96 		_NOLIBC_THUMB_RESTORE_R7                                      \
97 		: "=r"(_arg1), "=r" (_num)                                    \
98 		: "r"(_arg1), "r"(_arg2),                                     \
99 		  "r"(_num)                                                   \
100 		: "memory", "cc", "lr"                                        \
101 	);                                                                    \
102 	_arg1;                                                                \
103 })
104 
105 #define my_syscall3(num, arg1, arg2, arg3)                                    \
106 ({                                                                            \
107 	register long _num  __asm__(_NOLIBC_SYSCALL_REG) = (num);             \
108 	register long _arg1 __asm__ ("r0") = (long)(arg1);                    \
109 	register long _arg2 __asm__ ("r1") = (long)(arg2);                    \
110 	register long _arg3 __asm__ ("r2") = (long)(arg3);                    \
111 									      \
112 	__asm__ volatile (                                                    \
113 		_NOLIBC_THUMB_SET_R7                                          \
114 		"svc #0\n"                                                    \
115 		_NOLIBC_THUMB_RESTORE_R7                                      \
116 		: "=r"(_arg1), "=r" (_num)                                    \
117 		: "r"(_arg1), "r"(_arg2), "r"(_arg3),                         \
118 		  "r"(_num)                                                   \
119 		: "memory", "cc", "lr"                                        \
120 	);                                                                    \
121 	_arg1;                                                                \
122 })
123 
124 #define my_syscall4(num, arg1, arg2, arg3, arg4)                              \
125 ({                                                                            \
126 	register long _num  __asm__(_NOLIBC_SYSCALL_REG) = (num);             \
127 	register long _arg1 __asm__ ("r0") = (long)(arg1);                    \
128 	register long _arg2 __asm__ ("r1") = (long)(arg2);                    \
129 	register long _arg3 __asm__ ("r2") = (long)(arg3);                    \
130 	register long _arg4 __asm__ ("r3") = (long)(arg4);                    \
131 									      \
132 	__asm__ volatile (                                                    \
133 		_NOLIBC_THUMB_SET_R7                                          \
134 		"svc #0\n"                                                    \
135 		_NOLIBC_THUMB_RESTORE_R7                                      \
136 		: "=r"(_arg1), "=r" (_num)                                    \
137 		: "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4),             \
138 		  "r"(_num)                                                   \
139 		: "memory", "cc", "lr"                                        \
140 	);                                                                    \
141 	_arg1;                                                                \
142 })
143 
144 #define my_syscall5(num, arg1, arg2, arg3, arg4, arg5)                        \
145 ({                                                                            \
146 	register long _num  __asm__(_NOLIBC_SYSCALL_REG) = (num);             \
147 	register long _arg1 __asm__ ("r0") = (long)(arg1);                    \
148 	register long _arg2 __asm__ ("r1") = (long)(arg2);                    \
149 	register long _arg3 __asm__ ("r2") = (long)(arg3);                    \
150 	register long _arg4 __asm__ ("r3") = (long)(arg4);                    \
151 	register long _arg5 __asm__ ("r4") = (long)(arg5);                    \
152 									      \
153 	__asm__ volatile (                                                    \
154 		_NOLIBC_THUMB_SET_R7                                          \
155 		"svc #0\n"                                                    \
156 		_NOLIBC_THUMB_RESTORE_R7                                      \
157 		: "=r"(_arg1), "=r" (_num)                                    \
158 		: "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), \
159 		  "r"(_num)                                                   \
160 		: "memory", "cc", "lr"                                        \
161 	);                                                                    \
162 	_arg1;                                                                \
163 })
164 
165 #define my_syscall6(num, arg1, arg2, arg3, arg4, arg5, arg6)                  \
166 ({                                                                            \
167 	register long _num  __asm__(_NOLIBC_SYSCALL_REG) = (num);             \
168 	register long _arg1 __asm__ ("r0") = (long)(arg1);                    \
169 	register long _arg2 __asm__ ("r1") = (long)(arg2);                    \
170 	register long _arg3 __asm__ ("r2") = (long)(arg3);                    \
171 	register long _arg4 __asm__ ("r3") = (long)(arg4);                    \
172 	register long _arg5 __asm__ ("r4") = (long)(arg5);                    \
173 	register long _arg6 __asm__ ("r5") = (long)(arg6);                    \
174 									      \
175 	__asm__ volatile (                                                    \
176 		_NOLIBC_THUMB_SET_R7                                          \
177 		"svc #0\n"                                                    \
178 		_NOLIBC_THUMB_RESTORE_R7                                      \
179 		: "=r"(_arg1), "=r" (_num)                                    \
180 		: "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), \
181 		  "r"(_arg6), "r"(_num)                                       \
182 		: "memory", "cc", "lr"                                        \
183 	);                                                                    \
184 	_arg1;                                                                \
185 })
186 
187 /* startup code */
_start(void)188 void __attribute__((weak, noreturn)) __nolibc_entrypoint __no_stack_protector _start(void)
189 {
190 	__asm__ volatile (
191 		"mov r0, sp\n"          /* save stack pointer to %r0, as arg1 of _start_c */
192 		"and ip, r0, #-8\n"     /* sp must be 8-byte aligned in the callee        */
193 		"mov sp, ip\n"
194 		"bl  _start_c\n"        /* transfer to c runtime                          */
195 	);
196 	__nolibc_entrypoint_epilogue();
197 }
198 
199 #endif /* _NOLIBC_ARCH_ARM_H */
200