xref: /linux/arch/arm/boot/dts/arm/vexpress-v2m-rs1.dtsi (revision a1ff5a7d78a036d6c2178ee5acd6ba4946243800)
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * ARM Ltd. Versatile Express
4 *
5 * Motherboard Express uATX
6 * V2M-P1
7 *
8 * HBI-0190D
9 *
10 * RS1 memory map ("ARM Cortex-A Series memory map" in the board's
11 * Technical Reference Manual)
12 *
13 * WARNING! The hardware described in this file is independent from the
14 * original variant (vexpress-v2m.dtsi), but there is a strong
15 * correspondence between the two configurations.
16 *
17 * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
18 * CHANGES TO vexpress-v2m.dtsi!
19 */
20#include <dt-bindings/interrupt-controller/arm-gic.h>
21
22/ {
23	v2m_fixed_3v3: regulator-3v3 {
24		compatible = "regulator-fixed";
25		regulator-name = "3V3";
26		regulator-min-microvolt = <3300000>;
27		regulator-max-microvolt = <3300000>;
28		regulator-always-on;
29	};
30
31	v2m_clk24mhz: clock-24000000 {
32		compatible = "fixed-clock";
33		#clock-cells = <0>;
34		clock-frequency = <24000000>;
35		clock-output-names = "v2m:clk24mhz";
36	};
37
38	v2m_refclk1mhz: clock-1000000 {
39		compatible = "fixed-clock";
40		#clock-cells = <0>;
41		clock-frequency = <1000000>;
42		clock-output-names = "v2m:refclk1mhz";
43	};
44
45	v2m_refclk32khz: clock-32768 {
46		compatible = "fixed-clock";
47		#clock-cells = <0>;
48		clock-frequency = <32768>;
49		clock-output-names = "v2m:refclk32khz";
50	};
51
52	leds {
53		compatible = "gpio-leds";
54
55		led-1 {
56			label = "v2m:green:user1";
57			gpios = <&v2m_led_gpios 0 0>;
58			linux,default-trigger = "heartbeat";
59		};
60
61		led-2 {
62			label = "v2m:green:user2";
63			gpios = <&v2m_led_gpios 1 0>;
64			linux,default-trigger = "disk-activity";
65		};
66
67		led-3 {
68			label = "v2m:green:user3";
69			gpios = <&v2m_led_gpios 2 0>;
70			linux,default-trigger = "cpu0";
71		};
72
73		led-4 {
74			label = "v2m:green:user4";
75			gpios = <&v2m_led_gpios 3 0>;
76			linux,default-trigger = "cpu1";
77		};
78
79		led-5 {
80			label = "v2m:green:user5";
81			gpios = <&v2m_led_gpios 4 0>;
82			linux,default-trigger = "cpu2";
83		};
84
85		led-6 {
86			label = "v2m:green:user6";
87			gpios = <&v2m_led_gpios 5 0>;
88			linux,default-trigger = "cpu3";
89		};
90
91		led-7 {
92			label = "v2m:green:user7";
93			gpios = <&v2m_led_gpios 6 0>;
94			linux,default-trigger = "cpu4";
95		};
96
97		led-8 {
98			label = "v2m:green:user8";
99			gpios = <&v2m_led_gpios 7 0>;
100			linux,default-trigger = "cpu5";
101		};
102	};
103
104	bus@8000000 {
105		compatible = "simple-bus";
106		#address-cells = <1>;
107		#size-cells = <1>;
108
109		#interrupt-cells = <1>;
110		interrupt-map-mask = <0 63>;
111		interrupt-map = <0  0 &gic GIC_SPI  0 IRQ_TYPE_LEVEL_HIGH>,
112				<0  1 &gic GIC_SPI  1 IRQ_TYPE_LEVEL_HIGH>,
113				<0  2 &gic GIC_SPI  2 IRQ_TYPE_LEVEL_HIGH>,
114				<0  3 &gic GIC_SPI  3 IRQ_TYPE_LEVEL_HIGH>,
115				<0  4 &gic GIC_SPI  4 IRQ_TYPE_LEVEL_HIGH>,
116				<0  5 &gic GIC_SPI  5 IRQ_TYPE_LEVEL_HIGH>,
117				<0  6 &gic GIC_SPI  6 IRQ_TYPE_LEVEL_HIGH>,
118				<0  7 &gic GIC_SPI  7 IRQ_TYPE_LEVEL_HIGH>,
119				<0  8 &gic GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
120				<0  9 &gic GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
121				<0 10 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
122				<0 11 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
123				<0 12 &gic GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
124				<0 13 &gic GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
125				<0 14 &gic GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
126				<0 15 &gic GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
127				<0 16 &gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
128				<0 17 &gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
129				<0 18 &gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
130				<0 19 &gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
131				<0 20 &gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
132				<0 21 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
133				<0 22 &gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
134				<0 23 &gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
135				<0 24 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
136				<0 25 &gic GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
137				<0 26 &gic GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
138				<0 27 &gic GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
139				<0 28 &gic GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
140				<0 29 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
141				<0 30 &gic GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
142				<0 31 &gic GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
143				<0 32 &gic GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
144				<0 33 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
145				<0 34 &gic GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
146				<0 35 &gic GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
147				<0 36 &gic GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
148				<0 37 &gic GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
149				<0 38 &gic GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
150				<0 39 &gic GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
151				<0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
152				<0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
153				<0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
154
155		motherboard-bus@8000000 {
156			arm,hbi = <0x190>;
157			arm,vexpress,site = <0>;
158			compatible = "arm,vexpress,v2m-p1", "simple-bus";
159			#address-cells = <2>; /* SMB chipselect number and offset */
160			#size-cells = <1>;
161			ranges = <0 0 0x08000000 0x04000000>,
162				 <1 0 0x14000000 0x04000000>,
163				 <2 0 0x18000000 0x04000000>,
164				 <3 0 0x1c000000 0x04000000>,
165				 <4 0 0x0c000000 0x04000000>,
166				 <5 0 0x10000000 0x04000000>;
167
168			nor_flash: flash@0 {
169				compatible = "arm,vexpress-flash", "cfi-flash";
170				reg = <0 0x00000000 0x04000000>,
171				      <4 0x00000000 0x04000000>;
172				bank-width = <4>;
173				partitions {
174					compatible = "arm,arm-firmware-suite";
175				};
176			};
177
178			psram@100000000 {
179				compatible = "arm,vexpress-psram", "mtd-ram";
180				reg = <1 0x00000000 0x02000000>;
181				bank-width = <4>;
182			};
183
184			ethernet@202000000 {
185				compatible = "smsc,lan9118", "smsc,lan9115";
186				reg = <2 0x02000000 0x10000>;
187				interrupts = <15>;
188				phy-mode = "mii";
189				reg-io-width = <4>;
190				smsc,irq-active-high;
191				smsc,irq-push-pull;
192				vdd33a-supply = <&v2m_fixed_3v3>;
193				vddvario-supply = <&v2m_fixed_3v3>;
194			};
195
196			usb@203000000 {
197				compatible = "nxp,usb-isp1761";
198				reg = <2 0x03000000 0x20000>;
199				interrupts = <16>;
200				dr_mode = "peripheral";
201			};
202
203			iofpga-bus@300000000 {
204				compatible = "simple-bus";
205				#address-cells = <1>;
206				#size-cells = <1>;
207				ranges = <0 3 0 0x200000>;
208
209				v2m_sysreg: sysreg@10000 {
210					compatible = "arm,vexpress-sysreg";
211					reg = <0x010000 0x1000>;
212					#address-cells = <1>;
213					#size-cells = <1>;
214					ranges = <0 0x10000 0x1000>;
215
216					v2m_led_gpios: gpio@8 {
217						compatible = "arm,vexpress-sysreg,sys_led";
218						reg = <0x008 4>;
219						gpio-controller;
220						#gpio-cells = <2>;
221					};
222
223					v2m_mmc_gpios: gpio@48 {
224						compatible = "arm,vexpress-sysreg,sys_mci";
225						reg = <0x048 4>;
226						gpio-controller;
227						#gpio-cells = <2>;
228					};
229
230					v2m_flash_gpios: gpio@4c {
231						compatible = "arm,vexpress-sysreg,sys_flash";
232						reg = <0x04c 4>;
233						gpio-controller;
234						#gpio-cells = <2>;
235					};
236				};
237
238				v2m_sysctl: sysctl@20000 {
239					compatible = "arm,sp810", "arm,primecell";
240					reg = <0x020000 0x1000>;
241					clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
242					clock-names = "refclk", "timclk", "apb_pclk";
243					#clock-cells = <1>;
244					clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
245					assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
246					assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
247				};
248
249				/* PCI-E I2C bus */
250				v2m_i2c_pcie: i2c@30000 {
251					compatible = "arm,versatile-i2c";
252					reg = <0x030000 0x1000>;
253
254					#address-cells = <1>;
255					#size-cells = <0>;
256
257					pcie-switch@60 {
258						compatible = "idt,89hpes32h8";
259						reg = <0x60>;
260					};
261				};
262
263				aaci@40000 {
264					compatible = "arm,pl041", "arm,primecell";
265					reg = <0x040000 0x1000>;
266					interrupts = <11>;
267					clocks = <&smbclk>;
268					clock-names = "apb_pclk";
269				};
270
271				mmc@50000 {
272					compatible = "arm,pl180", "arm,primecell";
273					reg = <0x050000 0x1000>;
274					interrupts = <9>, <10>;
275					cd-gpios = <&v2m_mmc_gpios 0 0>;
276					wp-gpios = <&v2m_mmc_gpios 1 0>;
277					max-frequency = <12000000>;
278					vmmc-supply = <&v2m_fixed_3v3>;
279					clocks = <&v2m_clk24mhz>, <&smbclk>;
280					clock-names = "mclk", "apb_pclk";
281				};
282
283				kmi@60000 {
284					compatible = "arm,pl050", "arm,primecell";
285					reg = <0x060000 0x1000>;
286					interrupts = <12>;
287					clocks = <&v2m_clk24mhz>, <&smbclk>;
288					clock-names = "KMIREFCLK", "apb_pclk";
289				};
290
291				kmi@70000 {
292					compatible = "arm,pl050", "arm,primecell";
293					reg = <0x070000 0x1000>;
294					interrupts = <13>;
295					clocks = <&v2m_clk24mhz>, <&smbclk>;
296					clock-names = "KMIREFCLK", "apb_pclk";
297				};
298
299				v2m_serial0: serial@90000 {
300					compatible = "arm,pl011", "arm,primecell";
301					reg = <0x090000 0x1000>;
302					interrupts = <5>;
303					clocks = <&v2m_oscclk2>, <&smbclk>;
304					clock-names = "uartclk", "apb_pclk";
305				};
306
307				v2m_serial1: serial@a0000 {
308					compatible = "arm,pl011", "arm,primecell";
309					reg = <0x0a0000 0x1000>;
310					interrupts = <6>;
311					clocks = <&v2m_oscclk2>, <&smbclk>;
312					clock-names = "uartclk", "apb_pclk";
313				};
314
315				v2m_serial2: serial@b0000 {
316					compatible = "arm,pl011", "arm,primecell";
317					reg = <0x0b0000 0x1000>;
318					interrupts = <7>;
319					clocks = <&v2m_oscclk2>, <&smbclk>;
320					clock-names = "uartclk", "apb_pclk";
321				};
322
323				v2m_serial3: serial@c0000 {
324					compatible = "arm,pl011", "arm,primecell";
325					reg = <0x0c0000 0x1000>;
326					interrupts = <8>;
327					clocks = <&v2m_oscclk2>, <&smbclk>;
328					clock-names = "uartclk", "apb_pclk";
329				};
330
331				watchdog@f0000 {
332					compatible = "arm,sp805", "arm,primecell";
333					reg = <0x0f0000 0x1000>;
334					interrupts = <0>;
335					clocks = <&v2m_refclk32khz>, <&smbclk>;
336					clock-names = "wdog_clk", "apb_pclk";
337				};
338
339				v2m_timer01: timer@110000 {
340					compatible = "arm,sp804", "arm,primecell";
341					reg = <0x110000 0x1000>;
342					interrupts = <2>;
343					clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
344					clock-names = "timclken1", "timclken2", "apb_pclk";
345				};
346
347				v2m_timer23: timer@120000 {
348					compatible = "arm,sp804", "arm,primecell";
349					reg = <0x120000 0x1000>;
350					interrupts = <3>;
351					clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
352					clock-names = "timclken1", "timclken2", "apb_pclk";
353				};
354
355				/* DVI I2C bus */
356				v2m_i2c_dvi: i2c@160000 {
357					compatible = "arm,versatile-i2c";
358					reg = <0x160000 0x1000>;
359					#address-cells = <1>;
360					#size-cells = <0>;
361
362					dvi-transmitter@39 {
363						compatible = "sil,sii9022-tpi", "sil,sii9022";
364						reg = <0x39>;
365
366						ports {
367							#address-cells = <1>;
368							#size-cells = <0>;
369
370							port@0 {
371								reg = <0>;
372								dvi_bridge_in: endpoint {
373									remote-endpoint = <&clcd_pads>;
374								};
375							};
376						};
377					};
378
379					dvi-transmitter@60 {
380						compatible = "sil,sii9022-cpi", "sil,sii9022";
381						reg = <0x60>;
382					};
383				};
384
385				rtc@170000 {
386					compatible = "arm,pl031", "arm,primecell";
387					reg = <0x170000 0x1000>;
388					interrupts = <4>;
389					clocks = <&smbclk>;
390					clock-names = "apb_pclk";
391				};
392
393				compact-flash@1a0000 {
394					compatible = "arm,vexpress-cf", "ata-generic";
395					reg = <0x1a0000 0x100
396					       0x1a0100 0xf00>;
397					reg-shift = <2>;
398				};
399
400				clcd@1f0000 {
401					compatible = "arm,pl111", "arm,primecell";
402					reg = <0x1f0000 0x1000>;
403					interrupt-names = "combined";
404					interrupts = <14>;
405					clocks = <&v2m_oscclk1>, <&smbclk>;
406					clock-names = "clcdclk", "apb_pclk";
407					/* 800x600 16bpp @36MHz works fine */
408					max-memory-bandwidth = <54000000>;
409					memory-region = <&vram>;
410
411					port {
412						clcd_pads: endpoint {
413							remote-endpoint = <&dvi_bridge_in>;
414							arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
415						};
416					};
417				};
418
419				mcc {
420					compatible = "arm,vexpress,config-bus";
421					arm,vexpress,config-bridge = <&v2m_sysreg>;
422
423					oscclk0 {
424						/* MCC static memory clock */
425						compatible = "arm,vexpress-osc";
426						arm,vexpress-sysreg,func = <1 0>;
427						freq-range = <25000000 60000000>;
428						#clock-cells = <0>;
429						clock-output-names = "v2m:oscclk0";
430					};
431
432					v2m_oscclk1: oscclk1 {
433						/* CLCD clock */
434						compatible = "arm,vexpress-osc";
435						arm,vexpress-sysreg,func = <1 1>;
436						freq-range = <23750000 65000000>;
437						#clock-cells = <0>;
438						clock-output-names = "v2m:oscclk1";
439					};
440
441					v2m_oscclk2: oscclk2 {
442						/* IO FPGA peripheral clock */
443						compatible = "arm,vexpress-osc";
444						arm,vexpress-sysreg,func = <1 2>;
445						freq-range = <24000000 24000000>;
446						#clock-cells = <0>;
447						clock-output-names = "v2m:oscclk2";
448					};
449
450					volt-vio {
451						/* Logic level voltage */
452						compatible = "arm,vexpress-volt";
453						arm,vexpress-sysreg,func = <2 0>;
454						regulator-name = "VIO";
455						regulator-always-on;
456						label = "VIO";
457					};
458
459					temp-mcc {
460						/* MCC internal operating temperature */
461						compatible = "arm,vexpress-temp";
462						arm,vexpress-sysreg,func = <4 0>;
463						label = "MCC";
464					};
465
466					reset {
467						compatible = "arm,vexpress-reset";
468						arm,vexpress-sysreg,func = <5 0>;
469					};
470
471					muxfpga {
472						compatible = "arm,vexpress-muxfpga";
473						arm,vexpress-sysreg,func = <7 0>;
474					};
475
476					shutdown {
477						compatible = "arm,vexpress-shutdown";
478						arm,vexpress-sysreg,func = <8 0>;
479					};
480
481					reboot {
482						compatible = "arm,vexpress-reboot";
483						arm,vexpress-sysreg,func = <9 0>;
484					};
485
486					dvimode {
487						compatible = "arm,vexpress-dvimode";
488						arm,vexpress-sysreg,func = <11 0>;
489					};
490				};
491			};
492		};
493	};
494};
495