| /linux/drivers/gpu/drm/i915/ |
| H A D | i915_scheduler.c | diff 22b7a426bbe1ebe1520f92da4cd1617d1e1b5fc4 Thu Jun 20 16:20:51 CEST 2019 Chris Wilson <chris@chris-wilson.co.uk> drm/i915/execlists: Preempt-to-busy
When using a global seqno, we required a precise stop-the-workd event to
handle preemption and unwind the global seqno counter. To accomplish
this, we would preempt to a special out-of-band context and wait for the
machine to report that it was idle. Given an idle machine, we could very
precisely see which requests had completed and which we needed to feed
back into the run queue.
However, now that we have scrapped the global seqno, we no longer need
to precisely unwind the global counter and only track requests by their
per-context seqno. This allows us to loosely unwind inflight requests
while scheduling a preemption, with the enormous caveat that the
requests we put back on the run queue are still _inflight_ (until the
preemption request is complete). This makes request tracking much more
messy, as at any point then we can see a completed request that we
believe is not currently scheduled for execution. We also have to be
careful not to rewind RING_TAIL past RING_HEAD on preempting to the
running context, and for this we use a semaphore to prevent completion
of the request before continuing.
To accomplish this feat, we change how we track requests scheduled to
the HW. Instead of appending our requests onto a single list as we
submit, we track each submission to ELSP as its own block. Then upon
receiving the CS preemption event, we promote the pending block to the
inflight block (discarding what was previously being tracked). As normal
CS completion events arrive, we then remove stale entries from the
inflight tracker.
v2: Be a tinge paranoid and ensure we flush the write into the HWS page
for the GPU semaphore to pick in a timely fashion.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190620142052.19311-1-chris@chris-wilson.co.uk
|
| H A D | i915_utils.h | diff 22b7a426bbe1ebe1520f92da4cd1617d1e1b5fc4 Thu Jun 20 16:20:51 CEST 2019 Chris Wilson <chris@chris-wilson.co.uk> drm/i915/execlists: Preempt-to-busy
When using a global seqno, we required a precise stop-the-workd event to
handle preemption and unwind the global seqno counter. To accomplish
this, we would preempt to a special out-of-band context and wait for the
machine to report that it was idle. Given an idle machine, we could very
precisely see which requests had completed and which we needed to feed
back into the run queue.
However, now that we have scrapped the global seqno, we no longer need
to precisely unwind the global counter and only track requests by their
per-context seqno. This allows us to loosely unwind inflight requests
while scheduling a preemption, with the enormous caveat that the
requests we put back on the run queue are still _inflight_ (until the
preemption request is complete). This makes request tracking much more
messy, as at any point then we can see a completed request that we
believe is not currently scheduled for execution. We also have to be
careful not to rewind RING_TAIL past RING_HEAD on preempting to the
running context, and for this we use a semaphore to prevent completion
of the request before continuing.
To accomplish this feat, we change how we track requests scheduled to
the HW. Instead of appending our requests onto a single list as we
submit, we track each submission to ELSP as its own block. Then upon
receiving the CS preemption event, we promote the pending block to the
inflight block (discarding what was previously being tracked). As normal
CS completion events arrive, we then remove stale entries from the
inflight tracker.
v2: Be a tinge paranoid and ensure we flush the write into the HWS page
for the GPU semaphore to pick in a timely fashion.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190620142052.19311-1-chris@chris-wilson.co.uk
|
| H A D | i915_request.h | diff 22b7a426bbe1ebe1520f92da4cd1617d1e1b5fc4 Thu Jun 20 16:20:51 CEST 2019 Chris Wilson <chris@chris-wilson.co.uk> drm/i915/execlists: Preempt-to-busy
When using a global seqno, we required a precise stop-the-workd event to
handle preemption and unwind the global seqno counter. To accomplish
this, we would preempt to a special out-of-band context and wait for the
machine to report that it was idle. Given an idle machine, we could very
precisely see which requests had completed and which we needed to feed
back into the run queue.
However, now that we have scrapped the global seqno, we no longer need
to precisely unwind the global counter and only track requests by their
per-context seqno. This allows us to loosely unwind inflight requests
while scheduling a preemption, with the enormous caveat that the
requests we put back on the run queue are still _inflight_ (until the
preemption request is complete). This makes request tracking much more
messy, as at any point then we can see a completed request that we
believe is not currently scheduled for execution. We also have to be
careful not to rewind RING_TAIL past RING_HEAD on preempting to the
running context, and for this we use a semaphore to prevent completion
of the request before continuing.
To accomplish this feat, we change how we track requests scheduled to
the HW. Instead of appending our requests onto a single list as we
submit, we track each submission to ELSP as its own block. Then upon
receiving the CS preemption event, we promote the pending block to the
inflight block (discarding what was previously being tracked). As normal
CS completion events arrive, we then remove stale entries from the
inflight tracker.
v2: Be a tinge paranoid and ensure we flush the write into the HWS page
for the GPU semaphore to pick in a timely fashion.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190620142052.19311-1-chris@chris-wilson.co.uk
|
| H A D | i915_request.c | diff 22b7a426bbe1ebe1520f92da4cd1617d1e1b5fc4 Thu Jun 20 16:20:51 CEST 2019 Chris Wilson <chris@chris-wilson.co.uk> drm/i915/execlists: Preempt-to-busy
When using a global seqno, we required a precise stop-the-workd event to
handle preemption and unwind the global seqno counter. To accomplish
this, we would preempt to a special out-of-band context and wait for the
machine to report that it was idle. Given an idle machine, we could very
precisely see which requests had completed and which we needed to feed
back into the run queue.
However, now that we have scrapped the global seqno, we no longer need
to precisely unwind the global counter and only track requests by their
per-context seqno. This allows us to loosely unwind inflight requests
while scheduling a preemption, with the enormous caveat that the
requests we put back on the run queue are still _inflight_ (until the
preemption request is complete). This makes request tracking much more
messy, as at any point then we can see a completed request that we
believe is not currently scheduled for execution. We also have to be
careful not to rewind RING_TAIL past RING_HEAD on preempting to the
running context, and for this we use a semaphore to prevent completion
of the request before continuing.
To accomplish this feat, we change how we track requests scheduled to
the HW. Instead of appending our requests onto a single list as we
submit, we track each submission to ELSP as its own block. Then upon
receiving the CS preemption event, we promote the pending block to the
inflight block (discarding what was previously being tracked). As normal
CS completion events arrive, we then remove stale entries from the
inflight tracker.
v2: Be a tinge paranoid and ensure we flush the write into the HWS page
for the GPU semaphore to pick in a timely fashion.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190620142052.19311-1-chris@chris-wilson.co.uk
|
| H A D | i915_gpu_error.c | diff 22b7a426bbe1ebe1520f92da4cd1617d1e1b5fc4 Thu Jun 20 16:20:51 CEST 2019 Chris Wilson <chris@chris-wilson.co.uk> drm/i915/execlists: Preempt-to-busy
When using a global seqno, we required a precise stop-the-workd event to
handle preemption and unwind the global seqno counter. To accomplish
this, we would preempt to a special out-of-band context and wait for the
machine to report that it was idle. Given an idle machine, we could very
precisely see which requests had completed and which we needed to feed
back into the run queue.
However, now that we have scrapped the global seqno, we no longer need
to precisely unwind the global counter and only track requests by their
per-context seqno. This allows us to loosely unwind inflight requests
while scheduling a preemption, with the enormous caveat that the
requests we put back on the run queue are still _inflight_ (until the
preemption request is complete). This makes request tracking much more
messy, as at any point then we can see a completed request that we
believe is not currently scheduled for execution. We also have to be
careful not to rewind RING_TAIL past RING_HEAD on preempting to the
running context, and for this we use a semaphore to prevent completion
of the request before continuing.
To accomplish this feat, we change how we track requests scheduled to
the HW. Instead of appending our requests onto a single list as we
submit, we track each submission to ELSP as its own block. Then upon
receiving the CS preemption event, we promote the pending block to the
inflight block (discarding what was previously being tracked). As normal
CS completion events arrive, we then remove stale entries from the
inflight tracker.
v2: Be a tinge paranoid and ensure we flush the write into the HWS page
for the GPU semaphore to pick in a timely fashion.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190620142052.19311-1-chris@chris-wilson.co.uk
|
| /linux/drivers/gpu/drm/i915/gt/ |
| H A D | intel_engine.h | diff 22b7a426bbe1ebe1520f92da4cd1617d1e1b5fc4 Thu Jun 20 16:20:51 CEST 2019 Chris Wilson <chris@chris-wilson.co.uk> drm/i915/execlists: Preempt-to-busy
When using a global seqno, we required a precise stop-the-workd event to
handle preemption and unwind the global seqno counter. To accomplish
this, we would preempt to a special out-of-band context and wait for the
machine to report that it was idle. Given an idle machine, we could very
precisely see which requests had completed and which we needed to feed
back into the run queue.
However, now that we have scrapped the global seqno, we no longer need
to precisely unwind the global counter and only track requests by their
per-context seqno. This allows us to loosely unwind inflight requests
while scheduling a preemption, with the enormous caveat that the
requests we put back on the run queue are still _inflight_ (until the
preemption request is complete). This makes request tracking much more
messy, as at any point then we can see a completed request that we
believe is not currently scheduled for execution. We also have to be
careful not to rewind RING_TAIL past RING_HEAD on preempting to the
running context, and for this we use a semaphore to prevent completion
of the request before continuing.
To accomplish this feat, we change how we track requests scheduled to
the HW. Instead of appending our requests onto a single list as we
submit, we track each submission to ELSP as its own block. Then upon
receiving the CS preemption event, we promote the pending block to the
inflight block (discarding what was previously being tracked). As normal
CS completion events arrive, we then remove stale entries from the
inflight tracker.
v2: Be a tinge paranoid and ensure we flush the write into the HWS page
for the GPU semaphore to pick in a timely fashion.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190620142052.19311-1-chris@chris-wilson.co.uk
|
| H A D | intel_context_types.h | diff 22b7a426bbe1ebe1520f92da4cd1617d1e1b5fc4 Thu Jun 20 16:20:51 CEST 2019 Chris Wilson <chris@chris-wilson.co.uk> drm/i915/execlists: Preempt-to-busy
When using a global seqno, we required a precise stop-the-workd event to
handle preemption and unwind the global seqno counter. To accomplish
this, we would preempt to a special out-of-band context and wait for the
machine to report that it was idle. Given an idle machine, we could very
precisely see which requests had completed and which we needed to feed
back into the run queue.
However, now that we have scrapped the global seqno, we no longer need
to precisely unwind the global counter and only track requests by their
per-context seqno. This allows us to loosely unwind inflight requests
while scheduling a preemption, with the enormous caveat that the
requests we put back on the run queue are still _inflight_ (until the
preemption request is complete). This makes request tracking much more
messy, as at any point then we can see a completed request that we
believe is not currently scheduled for execution. We also have to be
careful not to rewind RING_TAIL past RING_HEAD on preempting to the
running context, and for this we use a semaphore to prevent completion
of the request before continuing.
To accomplish this feat, we change how we track requests scheduled to
the HW. Instead of appending our requests onto a single list as we
submit, we track each submission to ELSP as its own block. Then upon
receiving the CS preemption event, we promote the pending block to the
inflight block (discarding what was previously being tracked). As normal
CS completion events arrive, we then remove stale entries from the
inflight tracker.
v2: Be a tinge paranoid and ensure we flush the write into the HWS page
for the GPU semaphore to pick in a timely fashion.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190620142052.19311-1-chris@chris-wilson.co.uk
|
| H A D | intel_engine_types.h | diff 22b7a426bbe1ebe1520f92da4cd1617d1e1b5fc4 Thu Jun 20 16:20:51 CEST 2019 Chris Wilson <chris@chris-wilson.co.uk> drm/i915/execlists: Preempt-to-busy
When using a global seqno, we required a precise stop-the-workd event to
handle preemption and unwind the global seqno counter. To accomplish
this, we would preempt to a special out-of-band context and wait for the
machine to report that it was idle. Given an idle machine, we could very
precisely see which requests had completed and which we needed to feed
back into the run queue.
However, now that we have scrapped the global seqno, we no longer need
to precisely unwind the global counter and only track requests by their
per-context seqno. This allows us to loosely unwind inflight requests
while scheduling a preemption, with the enormous caveat that the
requests we put back on the run queue are still _inflight_ (until the
preemption request is complete). This makes request tracking much more
messy, as at any point then we can see a completed request that we
believe is not currently scheduled for execution. We also have to be
careful not to rewind RING_TAIL past RING_HEAD on preempting to the
running context, and for this we use a semaphore to prevent completion
of the request before continuing.
To accomplish this feat, we change how we track requests scheduled to
the HW. Instead of appending our requests onto a single list as we
submit, we track each submission to ELSP as its own block. Then upon
receiving the CS preemption event, we promote the pending block to the
inflight block (discarding what was previously being tracked). As normal
CS completion events arrive, we then remove stale entries from the
inflight tracker.
v2: Be a tinge paranoid and ensure we flush the write into the HWS page
for the GPU semaphore to pick in a timely fashion.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190620142052.19311-1-chris@chris-wilson.co.uk
|
| H A D | intel_engine_cs.c | diff 22b7a426bbe1ebe1520f92da4cd1617d1e1b5fc4 Thu Jun 20 16:20:51 CEST 2019 Chris Wilson <chris@chris-wilson.co.uk> drm/i915/execlists: Preempt-to-busy
When using a global seqno, we required a precise stop-the-workd event to
handle preemption and unwind the global seqno counter. To accomplish
this, we would preempt to a special out-of-band context and wait for the
machine to report that it was idle. Given an idle machine, we could very
precisely see which requests had completed and which we needed to feed
back into the run queue.
However, now that we have scrapped the global seqno, we no longer need
to precisely unwind the global counter and only track requests by their
per-context seqno. This allows us to loosely unwind inflight requests
while scheduling a preemption, with the enormous caveat that the
requests we put back on the run queue are still _inflight_ (until the
preemption request is complete). This makes request tracking much more
messy, as at any point then we can see a completed request that we
believe is not currently scheduled for execution. We also have to be
careful not to rewind RING_TAIL past RING_HEAD on preempting to the
running context, and for this we use a semaphore to prevent completion
of the request before continuing.
To accomplish this feat, we change how we track requests scheduled to
the HW. Instead of appending our requests onto a single list as we
submit, we track each submission to ELSP as its own block. Then upon
receiving the CS preemption event, we promote the pending block to the
inflight block (discarding what was previously being tracked). As normal
CS completion events arrive, we then remove stale entries from the
inflight tracker.
v2: Be a tinge paranoid and ensure we flush the write into the HWS page
for the GPU semaphore to pick in a timely fashion.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190620142052.19311-1-chris@chris-wilson.co.uk
|
| H A D | intel_lrc.c | diff 22b7a426bbe1ebe1520f92da4cd1617d1e1b5fc4 Thu Jun 20 16:20:51 CEST 2019 Chris Wilson <chris@chris-wilson.co.uk> drm/i915/execlists: Preempt-to-busy
When using a global seqno, we required a precise stop-the-workd event to
handle preemption and unwind the global seqno counter. To accomplish
this, we would preempt to a special out-of-band context and wait for the
machine to report that it was idle. Given an idle machine, we could very
precisely see which requests had completed and which we needed to feed
back into the run queue.
However, now that we have scrapped the global seqno, we no longer need
to precisely unwind the global counter and only track requests by their
per-context seqno. This allows us to loosely unwind inflight requests
while scheduling a preemption, with the enormous caveat that the
requests we put back on the run queue are still _inflight_ (until the
preemption request is complete). This makes request tracking much more
messy, as at any point then we can see a completed request that we
believe is not currently scheduled for execution. We also have to be
careful not to rewind RING_TAIL past RING_HEAD on preempting to the
running context, and for this we use a semaphore to prevent completion
of the request before continuing.
To accomplish this feat, we change how we track requests scheduled to
the HW. Instead of appending our requests onto a single list as we
submit, we track each submission to ELSP as its own block. Then upon
receiving the CS preemption event, we promote the pending block to the
inflight block (discarding what was previously being tracked). As normal
CS completion events arrive, we then remove stale entries from the
inflight tracker.
v2: Be a tinge paranoid and ensure we flush the write into the HWS page
for the GPU semaphore to pick in a timely fashion.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190620142052.19311-1-chris@chris-wilson.co.uk
|
| /linux/drivers/gpu/drm/i915/selftests/ |
| H A D | i915_request.c | diff 22b7a426bbe1ebe1520f92da4cd1617d1e1b5fc4 Thu Jun 20 16:20:51 CEST 2019 Chris Wilson <chris@chris-wilson.co.uk> drm/i915/execlists: Preempt-to-busy
When using a global seqno, we required a precise stop-the-workd event to
handle preemption and unwind the global seqno counter. To accomplish
this, we would preempt to a special out-of-band context and wait for the
machine to report that it was idle. Given an idle machine, we could very
precisely see which requests had completed and which we needed to feed
back into the run queue.
However, now that we have scrapped the global seqno, we no longer need
to precisely unwind the global counter and only track requests by their
per-context seqno. This allows us to loosely unwind inflight requests
while scheduling a preemption, with the enormous caveat that the
requests we put back on the run queue are still _inflight_ (until the
preemption request is complete). This makes request tracking much more
messy, as at any point then we can see a completed request that we
believe is not currently scheduled for execution. We also have to be
careful not to rewind RING_TAIL past RING_HEAD on preempting to the
running context, and for this we use a semaphore to prevent completion
of the request before continuing.
To accomplish this feat, we change how we track requests scheduled to
the HW. Instead of appending our requests onto a single list as we
submit, we track each submission to ELSP as its own block. Then upon
receiving the CS preemption event, we promote the pending block to the
inflight block (discarding what was previously being tracked). As normal
CS completion events arrive, we then remove stale entries from the
inflight tracker.
v2: Be a tinge paranoid and ensure we flush the write into the HWS page
for the GPU semaphore to pick in a timely fashion.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190620142052.19311-1-chris@chris-wilson.co.uk
|
| /linux/drivers/gpu/drm/i915/gem/ |
| H A D | i915_gem_context.c | diff 22b7a426bbe1ebe1520f92da4cd1617d1e1b5fc4 Thu Jun 20 16:20:51 CEST 2019 Chris Wilson <chris@chris-wilson.co.uk> drm/i915/execlists: Preempt-to-busy
When using a global seqno, we required a precise stop-the-workd event to
handle preemption and unwind the global seqno counter. To accomplish
this, we would preempt to a special out-of-band context and wait for the
machine to report that it was idle. Given an idle machine, we could very
precisely see which requests had completed and which we needed to feed
back into the run queue.
However, now that we have scrapped the global seqno, we no longer need
to precisely unwind the global counter and only track requests by their
per-context seqno. This allows us to loosely unwind inflight requests
while scheduling a preemption, with the enormous caveat that the
requests we put back on the run queue are still _inflight_ (until the
preemption request is complete). This makes request tracking much more
messy, as at any point then we can see a completed request that we
believe is not currently scheduled for execution. We also have to be
careful not to rewind RING_TAIL past RING_HEAD on preempting to the
running context, and for this we use a semaphore to prevent completion
of the request before continuing.
To accomplish this feat, we change how we track requests scheduled to
the HW. Instead of appending our requests onto a single list as we
submit, we track each submission to ELSP as its own block. Then upon
receiving the CS preemption event, we promote the pending block to the
inflight block (discarding what was previously being tracked). As normal
CS completion events arrive, we then remove stale entries from the
inflight tracker.
v2: Be a tinge paranoid and ensure we flush the write into the HWS page
for the GPU semaphore to pick in a timely fashion.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190620142052.19311-1-chris@chris-wilson.co.uk
|