/linux/Documentation/devicetree/bindings/mfd/ |
H A D | tps65910.txt | 4 - compatible: "ti,tps65910" or "ti,tps65911" 5 - reg: I2C slave address 6 - interrupts: the interrupt outputs of the controller 7 - #gpio-cells: number of cells to describe a GPIO, this should be 2. 10 - gpio-controller: mark the device as a GPIO controller 11 - #interrupt-cells: the number of cells to describe an IRQ, this should be 2. 14 Documentation/devicetree/bindings/interrupt-controller/interrupts.txt 15 - regulators: This is the list of child nodes that specify the regulator 20 The regulator is matched with the regulator-compatible. 22 The valid regulator-compatible values are: [all …]
|
H A D | rockchip,rk817.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Chris Zhong <zyw@rock-chips.com> 11 - Zhang Qing <zhangqing@rock-chips.com> 21 - rockchip,rk809 22 - rockchip,rk817 30 '#clock-cells': 32 See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. 39 clock-names: [all …]
|
H A D | rockchip,rk806.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Sebastian Reichel <sebastian.reichel@collabora.com> 19 - rockchip,rk806 27 gpio-controller: true 29 '#gpio-cells': 32 system-power-controller: true 34 vcc1-supply: 36 The input supply for dcdc-reg1. [all …]
|
/linux/Documentation/devicetree/bindings/opp/ |
H A D | opp-v2.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/opp/opp-v2.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Viresh Kumar <viresh.kumar@linaro.org> 13 - $ref: opp-v2-base.yaml# 17 const: operating-points-v2 22 - | 24 * Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states 28 #address-cells = <1>; [all …]
|
/linux/arch/arm/boot/dts/ti/omap/ |
H A D | am3517-craneboard.dts | 1 // SPDX-License-Identifier: GPL-2.0-only 5 * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ 7 /dts-v1/; 13 compatible = "ti,am3517-craneboard", "ti,am3517", "ti,omap3"; 21 compatible = "regulator-fixed"; 22 regulator-name = "vbat"; 23 regulator-min-microvolt = <5000000>; 24 regulator-max-microvolt = <5000000>; 25 regulator-boot-on; 38 clock-frequency = <2600000>; [all …]
|
H A D | am335x-igep0033.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * am335x-igep0033.dtsi - Device Tree file for IGEP COM AQUILA AM335x 5 * Copyright (C) 2013 ISEE 2007 SL - https://www.isee.biz 8 /dts-v1/; 11 #include <dt-bindings/interrupt-controller/irq.h> 16 cpu0-supply = <&vdd1_reg>; 26 pinctrl-names = "default"; 27 pinctrl-0 = <&leds_pins>; 29 compatible = "gpio-leds"; 34 default-state = "on"; [all …]
|
H A D | am335x-phycore-som.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 8 #include <dt-bindings/interrupt-controller/irq.h> 12 compatible = "phytec,am335x-phycore-som", "ti,am33xx"; 22 cpu0-supply = <&vdd1_reg>; 32 compatible = "regulator-fixed"; 33 regulator-name = "vcc5v"; 34 regulator-min-microvolt = <5000000>; 35 regulator-max-microvolt = <5000000>; 36 regulator-boot-on; 37 regulator-always-on; [all …]
|
H A D | am335x-lxm.dts | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * Copyright (C) 2014 NovaTech LLC - https://www.novatechweb.com 5 /dts-v1/; 11 compatible = "novatech,am335x-lxm", "ti,am33xx"; 15 cpu0-supply = <&vdd1_reg>; 24 /* Power supply provides a fixed 5V @2A */ 26 compatible = "regulator-fixed"; 27 regulator-name = "vbat"; 28 regulator-min-microvolt = <5000000>; 29 regulator-max-microvolt = <5000000>; [all …]
|
H A D | am335x-moxa-uc-8100-common.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * Copyright (C) 2020 MOXA Inc. - https://www.moxa.com/ 14 cpu0-supply = <&vdd1_reg>; 18 vbat: vbat-regulator { 19 compatible = "regulator-fixed"; 22 /* Power supply provides a fixed 3.3V @3A */ 23 vmmcsd_fixed: vmmcsd-regulator { 24 compatible = "regulator-fixed"; 25 regulator-name = "vmmcsd_fixed"; 26 regulator-min-microvolt = <3300000>; [all …]
|
/linux/arch/arm/boot/dts/nvidia/ |
H A D | tegra30-asus-nexus7-grouper-ti-pmic.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 3 #include <dt-bindings/interrupt-controller/arm-gic.h> 4 #include <dt-bindings/gpio/gpio.h> 13 #interrupt-cells = <2>; 14 interrupt-controller; 15 wakeup-source; 17 ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>; 18 ti,system-power-controller; 19 ti,sleep-keep-ck32k; 20 ti,sleep-enable; [all …]
|
/linux/arch/arm/boot/dts/rockchip/ |
H A D | rk3066a-marsboard.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 /dts-v1/; 11 compatible = "haoyu,marsboard-rk3066", "rockchip,rk3066a"; 23 compatible = "hdmi-connector"; 28 remote-endpoint = <&hdmi_out_con>; 33 vdd_log: regulator-vdd-log { 34 compatible = "pwm-regulator"; 36 regulator-name = "vdd_log"; 37 regulator-min-microvolt = <1200000>; 38 regulator-max-microvolt = <1200000>; [all …]
|
H A D | rk3288-evb-rk808.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 3 /dts-v1/; 4 #include "rk3288-evb.dtsi" 8 compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288"; 12 clock-frequency = <400000>; 17 interrupt-parent = <&gpio0>; 19 pinctrl-names = "default"; 20 pinctrl-0 = <&pmic_int &global_pwroff>; 21 rockchip,system-power-controller; 22 wakeup-source; [all …]
|
H A D | rv1108-elgin-r1.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 7 /dts-v1/; 13 compatible = "elgin,rv1108-r1", "rockchip,rv1108"; 25 stdout-path = "serial2:1500000n8"; 28 vcc_sys: regulator-vsys { 29 compatible = "regulator-fixed"; 30 regulator-name = "vsys"; 31 regulator-min-microvolt = <5000000>; 32 regulator-max-microvolt = <5000000>; 33 regulator-boot-on; [all …]
|
H A D | rk3036-kylin.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 3 /dts-v1/; 9 compatible = "rockchip,rk3036-kylin", "rockchip,rk3036"; 18 stdout-path = "serial2:115200n8"; 26 hdmi_con: hdmi-con { 27 compatible = "hdmi-connector"; 32 remote-endpoint = <&hdmi_out_con>; 37 leds: gpio-leds { 38 compatible = "gpio-leds"; 40 work_led: led-0 { [all …]
|
/linux/arch/arm64/boot/dts/amlogic/ |
H A D | meson-g12b-odroid-go-ultra.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 /dts-v1/; 8 #include "meson-g12b-s922x.dtsi" 9 #include <dt-bindings/input/input.h> 10 #include <dt-bindings/leds/common.h> 11 #include <dt-bindings/gpio/meson-g12a-gpio.h> 12 #include <dt-bindings/sound/meson-g12a-toacodec.h> 13 #include <dt-bindings/sound/meson-g12a-tohdmitx.h> 16 compatible = "hardkernel,odroid-go-ultra", "amlogic,s922x", "amlogic,g12b"; 17 model = "Hardkernel ODROID-GO-Ultra"; [all …]
|
/linux/arch/arm64/boot/dts/rockchip/ |
H A D | px30-firefly-jd4-core.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 #include <dt-bindings/gpio/gpio.h> 7 #include <dt-bindings/pinctrl/rockchip.h> 11 compatible = "firefly,px30-jd4-core", "rockchip,px30"; 13 emmc_pwrseq: emmc-pwrseq { 14 compatible = "mmc-pwrseq-emmc"; 15 pinctrl-0 = <&emmc_reset>; 16 pinctrl-names = "default"; 17 reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>; 20 vcc5v0_sys: regulator-vcc5v0-sys { [all …]
|
H A D | rk3328-orangepi-r1-plus.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 3 * Based on rk3328-nanopi-r2s.dts, which is: 4 * Copyright (c) 2020 David Bauer <mail@david-bauer.net> 7 /dts-v1/; 9 #include <dt-bindings/gpio/gpio.h> 10 #include <dt-bindings/leds/common.h> 21 stdout-path = "serial2:1500000n8"; 24 gmac_clk: gmac-clock { 25 compatible = "fixed-clock"; 26 clock-frequency = <125000000>; [all …]
|
H A D | rk3328-rock64.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 /dts-v1/; 20 stdout-path = "serial2:1500000n8"; 23 gmac_clkin: external-gmac-clock { 24 compatible = "fixed-clock"; 25 clock-frequency = <125000000>; 26 clock-output-names = "gmac_clkin"; 27 #clock-cells = <0>; 30 vcc_sd: regulator-sdmmc { 31 compatible = "regulator-fixed"; [all …]
|
H A D | rk3568-radxa-cm3i.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 3 #include <dt-bindings/gpio/gpio.h> 4 #include <dt-bindings/leds/common.h> 5 #include <dt-bindings/pinctrl/rockchip.h> 16 stdout-path = "serial2:115200n8"; 19 gpio-leds { 20 compatible = "gpio-leds"; 22 led_user: led-0 { 26 linux,default-trigger = "heartbeat"; 27 pinctrl-names = "default"; [all …]
|
H A D | px30-ringneck.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 /dts-v1/; 8 #include <dt-bindings/leds/common.h> 20 attiny-updi-gate-regulator { 21 compatible = "regulator-output"; 22 vout-supply = <&vg_attiny_updi>; 25 emmc_pwrseq: emmc-pwrseq { 26 compatible = "mmc-pwrseq-emmc"; 27 pinctrl-0 = <&emmc_reset>; 28 pinctrl-names = "default"; [all …]
|
H A D | rk3399-evb-ind.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 /dts-v1/; 11 compatible = "rockchip,rk3399-evb-ind", "rockchip,rk3399"; 19 stdout-path = "serial2:1500000n8"; 22 vcc5v0_sys: regulator-vcc5v0-sys { 23 compatible = "regulator-fixed"; 24 enable-active-high; 26 regulator-name = "vcc5v0_sys"; 27 regulator-always-on; 28 regulator-boot-on; [all …]
|
H A D | rk3588-evb2-v10.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 7 /dts-v1/; 9 #include <dt-bindings/clock/rockchip,rk3588-cru.h> 10 #include <dt-bindings/gpio/gpio.h> 11 #include <dt-bindings/pinctrl/rockchip.h> 12 #include <dt-bindings/soc/rockchip,vop2.h> 17 compatible = "rockchip,rk3588-evb2-v10", "rockchip,rk3588"; 25 stdout-path = "serial2:1500000n8"; 28 hdmi-con { 29 compatible = "hdmi-connector"; [all …]
|
H A D | rk3588-armsom-lm7.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 3 /dts-v1/; 5 #include <dt-bindings/gpio/gpio.h> 6 #include <dt-bindings/leds/common.h> 17 stdout-path = "serial2:1500000n8"; 20 vcc5v0_sys: regulator-vcc5v0-sys { 21 compatible = "regulator-fixed"; 22 regulator-name = "vcc5v0_sys"; 23 regulator-always-on; 24 regulator-boot-on; [all …]
|
H A D | rk3588-edgeble-neu6a-common.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 #include <dt-bindings/gpio/gpio.h> 7 #include <dt-bindings/leds/common.h> 14 gpio-leds { 15 compatible = "gpio-leds"; 17 led_user: led-0 { 21 linux,default-trigger = "heartbeat"; 22 pinctrl-names = "default"; 23 pinctrl-0 = <&led_user_en>; 27 vcc12v_dcin: regulator-vcc12v-dcin { [all …]
|
H A D | rk3588-firefly-core-3588j.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 3 #include <dt-bindings/gpio/gpio.h> 4 #include <dt-bindings/pinctrl/rockchip.h> 9 compatible = "firefly,core-3588j", "rockchip,rk3588"; 17 cpu-supply = <&vdd_cpu_big0_s0>; 21 cpu-supply = <&vdd_cpu_big0_s0>; 25 cpu-supply = <&vdd_cpu_big1_s0>; 29 cpu-supply = <&vdd_cpu_big1_s0>; 33 cpu-supply = <&vdd_cpu_lit_s0>; 37 cpu-supply = <&vdd_cpu_lit_s0>; [all …]
|