| /linux/arch/arm/boot/dts/aspeed/ |
| H A D | aspeed-bmc-inventec-starscream.dts | 1 // SPDX-License-Identifier: GPL-2.0-or-later 4 /dts-v1/; 6 #include "aspeed-g6.dtsi" 7 #include "aspeed-g6-pinctrl.dtsi" 8 #include <dt-bindings/i2c/i2c.h> 9 #include <dt-bindings/gpio/aspeed-gpio.h> 13 compatible = "inventec,starscream-bmc", "aspeed,ast2600"; 20 stdout-path = &uart5; 28 reserved-memory { 29 #address-cells = <1>; [all …]
|
| /linux/arch/arm64/boot/dts/st/ |
| H A D | stm32mp253.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) 3 * Copyright (C) STMicroelectronics 2023 - All Rights Reserved 11 compatible = "arm,cortex-a35"; 14 enable-method = "psci"; 15 power-domains = <&CPU_PD1>; 16 power-domain-names = "psci"; 20 arm-pmu { 23 interrupt-affinity = <&cpu0>, <&cpu1>; 27 CPU_PD1: power-domain-cpu1 { 28 #power-domain-cells = <0>; [all …]
|
| H A D | stm32mp233.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) 3 * Copyright (C) STMicroelectronics 2025 - All Rights Reserved 11 compatible = "arm,cortex-a35"; 14 enable-method = "psci"; 15 power-domains = <&cpu1_pd>; 16 power-domain-names = "psci"; 20 arm-pmu { 23 interrupt-affinity = <&cpu0>, <&cpu1>; 27 cpu1_pd: power-domain-cpu1 { 28 #power-domain-cells = <0>; [all …]
|
| /linux/arch/arm/boot/dts/axis/ |
| H A D | artpec6.dtsi | 2 * Device Tree Source for the Axis ARTPEC-6 SoC 4 * This file is dual-licensed: you can use it either under the terms 43 #include <dt-bindings/interrupt-controller/arm-gic.h> 44 #include <dt-bindings/dma/nbpfaxi.h> 45 #include <dt-bindings/clock/axis,artpec6-clkctrl.h> 48 #address-cells = <1>; 49 #size-cells = <1>; 51 interrupt-parent = <&intc>; 54 #address-cells = <1>; 55 #size-cells = <0>; [all …]
|
| /linux/arch/arm64/boot/dts/amlogic/ |
| H A D | meson-a1-ad402.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 7 /dts-v1/; 9 #include "meson-a1.dtsi" 10 #include <dt-bindings/thermal/thermal.h> 21 stdout-path = "serial0:115200n8"; 29 reserved-memory { 33 no-map; 39 compatible = "linaro,optee-tz"; 44 battery_4v2: regulator-battery-4v2 { 45 compatible = "regulator-fixed"; [all …]
|
| /linux/arch/arm/boot/dts/st/ |
| H A D | ste-dbx5x0.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-or-later 6 #include <dt-bindings/interrupt-controller/irq.h> 7 #include <dt-bindings/interrupt-controller/arm-gic.h> 8 #include <dt-bindings/clock/ste-db8500-clkout.h> 9 #include <dt-bindings/reset/stericsson,db8500-prcc-reset.h> 10 #include <dt-bindings/mfd/dbx500-prcmu.h> 11 #include <dt-bindings/arm/ux500_pm_domains.h> 12 #include <dt-bindings/gpio/gpio.h> 13 #include <dt-bindings/thermal/thermal.h> 16 #address-cells = <1>; [all …]
|
| /linux/arch/arm/boot/dts/renesas/ |
| H A D | r8a7792.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 3 * Device Tree Source for the R-Car V2H (R8A77920) SoC 8 #include <dt-bindings/clock/r8a7792-cpg-mssr.h> 9 #include <dt-bindings/interrupt-controller/irq.h> 10 #include <dt-bindings/interrupt-controller/arm-gic.h> 11 #include <dt-bindings/power/r8a7792-sysc.h> 15 #address-cells = <2>; 16 #size-cells = <2>; 17 interrupt-parent = <&gic>; 40 compatible = "fixed-clock"; [all …]
|
| H A D | r8a77470.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 8 #include <dt-bindings/interrupt-controller/irq.h> 9 #include <dt-bindings/interrupt-controller/arm-gic.h> 10 #include <dt-bindings/clock/r8a77470-cpg-mssr.h> 11 #include <dt-bindings/power/r8a77470-sysc.h> 14 #address-cells = <2>; 15 #size-cells = <2>; 16 interrupt-parent = <&gic>; 27 #address-cells = <1>; 28 #size-cells = <0>; [all …]
|
| H A D | r8a7794.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 3 * Device Tree Source for the R-Car E2 (R8A77940) SoC 9 #include <dt-bindings/clock/r8a7794-cpg-mssr.h> 10 #include <dt-bindings/interrupt-controller/arm-gic.h> 11 #include <dt-bindings/interrupt-controller/irq.h> 12 #include <dt-bindings/power/r8a7794-sysc.h> 16 #address-cells = <2>; 17 #size-cells = <2>; 18 interrupt-parent = <&gic>; 40 compatible = "fixed-clock"; [all …]
|
| H A D | r8a7793.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 3 * Device Tree Source for the R-Car M2-N (R8A77930) SoC 5 * Copyright (C) 2014-2015 Renesas Electronics Corporation 8 #include <dt-bindings/clock/r8a7793-cpg-mssr.h> 9 #include <dt-bindings/interrupt-controller/arm-gic.h> 10 #include <dt-bindings/interrupt-controller/irq.h> 11 #include <dt-bindings/power/r8a7793-sysc.h> 15 #address-cells = <2>; 16 #size-cells = <2>; 17 interrupt-parent = <&gic>; [all …]
|
| /linux/arch/arm64/boot/dts/allwinner/ |
| H A D | sun50i-h618-orangepi-zero3.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 /dts-v1/; 8 #include "sun50i-h616-orangepi-zero.dtsi" 9 #include "sun50i-h616-cpu-opp.dtsi" 13 compatible = "xunlong,orangepi-zero3", "allwinner,sun50i-h618"; 16 &cpu0 { 17 cpu-supply = <®_dcdc2>; 21 allwinner,tx-delay-ps = <700>; 22 phy-mode = "rgmii-rxid"; 23 phy-supply = <®_dldo1>; [all …]
|
| H A D | sun50i-h616-orangepi-zero2.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 /dts-v1/; 8 #include "sun50i-h616-orangepi-zero.dtsi" 9 #include "sun50i-h616-cpu-opp.dtsi" 13 compatible = "xunlong,orangepi-zero2", "allwinner,sun50i-h616"; 16 &cpu0 { 17 cpu-supply = <®_dcdca>; 21 allwinner,rx-delay-ps = <3100>; 22 allwinner,tx-delay-ps = <700>; 23 phy-mode = "rgmii"; [all …]
|
| /linux/arch/arm/boot/dts/microchip/ |
| H A D | sama7g5.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 3 * sama7g5.dtsi - Device Tree Include file for SAMA7G5 family SoC 12 #include <dt-bindings/iio/adc/at91-sama5d2_adc.h> 13 #include <dt-bindings/interrupt-controller/irq.h> 14 #include <dt-bindings/interrupt-controller/arm-gic.h> 15 #include <dt-bindings/clock/at91.h> 16 #include <dt-bindings/dma/at91.h> 17 #include <dt-bindings/gpio/gpio.h> 18 #include <dt-bindings/mfd/at91-usart.h> 19 #include <dt-bindings/nvmem/microchip,sama7g5-otpc.h> [all …]
|
| /linux/drivers/net/ethernet/sunplus/ |
| H A D | spl2sw_mac.c | 1 // SPDX-License-Identifier: GPL-2.0 20 if (comm->enable == 0) { in spl2sw_mac_hw_stop() 22 writel(0xffffffff, comm->l2sw_reg_base + L2SW_SW_INT_MASK_0); in spl2sw_mac_hw_stop() 23 writel(0xffffffff, comm->l2sw_reg_base + L2SW_SW_INT_STATUS_0); in spl2sw_mac_hw_stop() 26 reg = readl(comm->l2sw_reg_base + L2SW_CPU_CNTL); in spl2sw_mac_hw_stop() 28 writel(reg, comm->l2sw_reg_base + L2SW_CPU_CNTL); in spl2sw_mac_hw_stop() 32 reg = readl(comm->l2sw_reg_base + L2SW_PORT_CNTL0); in spl2sw_mac_hw_stop() 33 reg |= FIELD_PREP(MAC_DIS_PORT, ~comm->enable); in spl2sw_mac_hw_stop() 34 writel(reg, comm->l2sw_reg_base + L2SW_PORT_CNTL0); in spl2sw_mac_hw_stop() 42 reg = readl(comm->l2sw_reg_base + L2SW_CPU_CNTL); in spl2sw_mac_hw_start() [all …]
|
| /linux/arch/mips/boot/dts/loongson/ |
| H A D | loongson1b.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 3 * Copyright (c) 2023-2025 Keguang Zhang <keguang.zhang@gmail.com> 6 /dts-v1/; 10 cpu_opp_table: opp-table { 11 compatible = "operating-points-v2"; 12 opp-shared; 14 opp-44000000 { 15 opp-hz = /bits/ 64 <44000000>; 17 opp-47142000 { 18 opp-hz = /bits/ 64 <47142000>; [all …]
|
| /linux/drivers/cpufreq/ |
| H A D | tegra186-cpufreq.c | 1 // SPDX-License-Identifier: GPL-2.0-only 7 #include <linux/dma-mapping.h> 14 #include <soc/tegra/bpmp-abi.h> 29 /* CPU0 - A57 Cluster */ 34 /* CPU1 - Denver Cluster */ 39 /* CPU2 - Denver Cluster */ 44 /* CPU3 - A57 Cluster */ 49 /* CPU4 - A57 Cluster */ 54 /* CPU5 - A57 Cluster */ 80 dev = get_cpu_device(policy->cpu); in tegra_cpufreq_set_bw() [all …]
|
| /linux/Documentation/devicetree/bindings/net/ |
| H A D | marvell,pp2.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Marcin Wojtas <mw@semihalf.com> 11 - Russell King <linux@armlinux.org> 21 - marvell,armada-375-pp2 22 - marvell,armada-7k-pp22 28 "#address-cells": 31 "#size-cells": 37 - description: main controller clock [all …]
|
| /linux/arch/arm64/boot/dts/freescale/ |
| H A D | fsl-ls1043a.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 3 * Device Tree Include file for NXP Layerscape-1043A family SoC. 5 * Copyright 2014-2015 Freescale Semiconductor, Inc. 11 #include <dt-bindings/clock/fsl,qoriq-clockgen.h> 12 #include <dt-bindings/thermal/thermal.h> 13 #include <dt-bindings/interrupt-controller/arm-gic.h> 14 #include <dt-bindings/gpio/gpio.h> 18 interrupt-parent = <&gic>; 19 #address-cells = <2>; 20 #size-cells = <2>; [all …]
|
| /linux/arch/arm/boot/dts/rockchip/ |
| H A D | rk322x.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 3 #include <dt-bindings/gpio/gpio.h> 4 #include <dt-bindings/interrupt-controller/irq.h> 5 #include <dt-bindings/interrupt-controller/arm-gic.h> 6 #include <dt-bindings/pinctrl/rockchip.h> 7 #include <dt-bindings/clock/rk3228-cru.h> 8 #include <dt-bindings/thermal/thermal.h> 9 #include <dt-bindings/power/rk3228-power.h> 12 #address-cells = <1>; 13 #size-cells = <1>; [all …]
|
| H A D | rv1126.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 #include <dt-bindings/clock/rockchip,rv1126-cru.h> 7 #include <dt-bindings/gpio/gpio.h> 8 #include <dt-bindings/interrupt-controller/arm-gic.h> 9 #include <dt-bindings/interrupt-controller/irq.h> 10 #include <dt-bindings/pinctrl/rockchip.h> 11 #include <dt-bindings/power/rockchip,rv1126-power.h> 12 #include <dt-bindings/soc/rockchip,boot-mode.h> 15 #address-cells = <1>; 16 #size-cells = <1>; [all …]
|
| /linux/arch/arm/boot/dts/xilinx/ |
| H A D | zynq-7000.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 3 * Copyright (C) 2011 - 2014 Xilinx 7 #address-cells = <1>; 8 #size-cells = <1>; 9 compatible = "xlnx,zynq-7000"; 12 u-boot { 13 compatible = "u-boot,config"; 14 bootscr-address = /bits/ 64 <0x3000000>; 19 #address-cells = <1>; 20 #size-cells = <0>; [all …]
|
| /linux/arch/arm64/boot/dts/intel/ |
| H A D | socfpga_agilex.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 6 /dts-v1/; 7 #include <dt-bindings/reset/altr,rst-mgr-s10.h> 8 #include <dt-bindings/gpio/gpio.h> 9 #include <dt-bindings/interrupt-controller/arm-gic.h> 10 #include <dt-bindings/clock/agilex-clock.h> 13 compatible = "intel,socfpga-agilex"; 14 #address-cells = <2>; 15 #size-cells = <2>; 17 reserved-memory { [all …]
|
| /linux/arch/arm/boot/dts/ti/keystone/ |
| H A D | keystone-k2g-ice.dts | 1 // SPDX-License-Identifier: GPL-2.0 5 * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/ 7 /dts-v1/; 9 #include "keystone-k2g.dtsi" 10 #include <dt-bindings/net/ti-dp83867.h> 13 compatible = "ti,k2g-ice", "ti,k2g", "ti,keystone"; 21 reserved-memory { 22 #address-cells = <2>; 23 #size-cells = <2>; 26 dsp_common_memory: dsp-common-memory@81f800000 { [all …]
|
| /linux/arch/arm/boot/dts/ti/omap/ |
| H A D | am335x-bonegreen-eco.dts | 1 // SPDX-License-Identifier: GPL-2.0-only 5 /dts-v1/; 8 #include "am335x-bone-common.dtsi" 9 #include "am335x-bonegreen-common.dtsi" 10 #include <dt-bindings/net/ti-dp83867.h> 14 compatible = "seeed,am335x-bone-green-eco", "ti,am33xx"; 18 cpu0-supply = <&buck1>; 22 sys_5v: regulator-sys-5v { 23 compatible = "regulator-fixed"; 24 regulator-name = "sys_5v"; [all …]
|
| /linux/arch/arm/boot/dts/nxp/imx/ |
| H A D | imx53-usbarmory.dts | 1 // SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) 10 /dts-v1/; 15 compatible = "inversepath,imx53-usbarmory", "fsl,imx53"; 20 stdout-path = &uart1; 29 compatible = "gpio-leds"; 30 pinctrl-names = "default"; 31 pinctrl-0 = <&pinctrl_led>; 33 led-user { 36 linux,default-trigger = "heartbeat"; 45 &cpu0 { [all …]
|