| /freebsd/sys/contrib/device-tree/src/arm/ti/omap/ |
| H A D | omap36xx-clocks.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only
9 #clock-cells = <0>;
10 compatible = "ti,omap3-dpll-per-j-type-clock";
16 #clock-cells = <0>;
17 compatible = "ti,hsdiv-gate-clock";
19 ti,bit-shift = <0x1e>;
21 ti,set-rate-parent;
22 ti,set-bit-to-disable;
26 #clock-cells = <0>;
27 compatible = "ti,hsdiv-gate-clock";
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/pinctrl/ |
| H A D | sprd,pinctrl.txt | 6 register contains several bit fields with one bit or several bits
7 to configure for some global common configuration, such as domain
12 to choose one function (like: UART0) for which system, since we
16 of them, so we can not make every Spreadtrum-special configuration
18 global configuration in future. Then we add one "sprd,control" to
19 set these various global control configuration, and we need use
22 Moreover we recognise every fields comprising one bit or several
24 record every pin's bit offset, bit widt
[all...] |
| H A D | sprd,sc9860-pinctrl.txt | 3 Please refer to sprd,pinctrl.txt in this directory for common binding part
7 - compatible: Must be "sprd,sc9860-pinctrl".
8 - reg: The register address of pin controller device.
9 - pins : An array of strings, each string containing the name of a pin.
12 - function: A string containing the name of the function, values must be
14 - drive-strength: Drive strength in mA. Supported values: 2, 4, 6, 8, 10,
16 - input-schmitt-disable: Enable schmitt-trigger mode.
17 - input-schmitt-enable: Disable schmitt-trigger mode.
18 - bias-disable: Disable pin bias.
19 - bias-pull-down: Pull down on pin.
[all …]
|
| /freebsd/sys/contrib/alpine-hal/ |
| H A D | al_hal_nb_regs.h | 1 /*-
10 found at http://www.gnu.org/licenses/gpl-2.0.html
25 ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
29 (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
101 /* [0x6c] Read-only that reflects CPU Cluster Local GIC base high address */
103 /* [0x70] Read-only that reflects CPU Cluster Local GIC base low address */
105 /* [0x74] Read-only that reflects the device's IOGIC base high address. */
107 /* [0x78] Read-only that reflects IOGIC base low address */
310 /* [0x20] Specifies the state of the CPU with reference to power modes. */
451 /* Disable broadcast of barrier onto system bus.
[all …]
|
| H A D | al_hal_pbs_regs.h | 1 /*-
10 found at http://www.gnu.org/licenses/gpl-2.0.html
25 ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
29 (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
227 /* [0x158] Cntl - internal */
231 /* [0x160] Status - internal */
233 /* [0x164] Status - internal */
235 /* [0x168] Status - internal */
237 /* [0x16c] Status - internal */
239 /* [0x170] Control - internal */
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/hwmon/ |
| H A D | max6697.txt | 4 - compatible:
16 - reg: I2C address
20 - smbus-timeout-disable
21 Set to disable SMBus timeout. If not specified, SMBus timeout will be
23 - extended-range-enable
24 Only valid for MAX6581. Set to enable extended temperature range.
26 - beta-compensation-enable
27 Only valid for MAX6693 and MX6694. Set to enable beta compensation on
30 - alert-mask
31 Alert bit mask. Alert disabled for bits set.
[all …]
|
| /freebsd/sys/dev/ice/ |
| H A D | virtchnl_inline_ipsec.h | |
| /freebsd/share/man/man4/ |
| H A D | ice.4 | 2 .\" SPDX-License-Identifier: BSD-3-Clause
4 .\" Copyright (c) 2019-2020, Intel Corporation
18 .\" contributors may be used to endorse or promote products derived from
22 .\" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
26 .\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
40 .Nd Intel Ethernet 800 Series 1GbE to 200GbE driver
73 .Bl -bullet -compact
91 .Sx Link-Level Flow Control
113 .Sx Optics and auto-negotiation
115 .Sx PCI-Express Slot Bandwidth
[all …]
|
| /freebsd/crypto/openssl/doc/man3/ |
| H A D | OPENSSL_ia32cap.pod | 5 OPENSSL_ia32cap - the x86[_64] processor capabilities vector
13 OpenSSL supports a range of x86[_64] instruction set extensions and
15 stored internally as ten 32-bit capability vectors and for simplicity
16 represented logically below as five 64-bit vectors. This logical
17 vector (LV) representation is used to streamline the definition of the
22 environment variable capability bit modifications are applied. After toolkit
23 initialization is complete, populated vectors are then used to choose
24 between different code paths to provide optimal performance across a wide
28 Instruction Set Extensions Programming Reference, and the AMD64 Architecture
39 =item bit #0+4 denoting presence of Time-Stamp Counter;
[all …]
|
| /freebsd/sys/dev/msk/ |
| H A D | if_mskreg.h | 17 * are provided to you under the BSD-type license terms provided
22 * - Redistributions of source code must retain the above copyright
24 * - Redistributions in binary form must reproduce the above
28 * - Neither the name of Marvell nor the names of its contributors
29 * may be used to endorse or promote products derived from this
34 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
38 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
48 /*-
49 * SPDX-License-Identifier: BSD-4-Clause AND BSD-3-Clause
65 * 4. Neither the name of the author nor the names of any co-contributors
[all …]
|
| /freebsd/contrib/wpa/src/common/ |
| H A D | qca-vendor.h | 3 * Copyright (c) 2014-2017, Qualcomm Atheros, Inc.
4 * Copyright (c) 2018-2020, The Linux Foundation
5 * Copyright (c) 2021-2023, Qualcomm Innovation Center, Inc.
17 * can be assigned through normal review process for changes to the upstream
23 #ifndef BIT
24 #define BIT(x) (1U << (x)) macro
28 * enum qca_radiotap_vendor_ids - QCA radiotap vendor namespace IDs
37 * QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION to configure the number of
41 * Global NSS configuration - Applies to all bands (2.4 GHz and 5/6 GHz)
42 * The following attributes are used to dynamically configure the number of
[all …]
|
| /freebsd/sbin/camcontrol/ |
| H A D | camcontrol.8 | 13 .\" 3. The name of the author may not be used to endorse or promote products
17 .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21 .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
145 .Bk -words
171 .Op Fl a Ar enable|disable
172 .Op Fl A Ar enable|disable
173 .Op Fl s Ar enable|disable
174 .Op Fl S Ar enable|disable
208 .Op Fl D Ar enable|disable
213 .Op Fl T Ar enable|disable
[all …]
|
| /freebsd/sbin/ifconfig/ |
| H A D | ifconfig.8 | 1 .\"-
2 .\" SPDX-License-Identifier: BSD-3-Clause
16 .\" may be used to endorse or promote products derived from this software
20 .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24 .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
82 utility is used to assign an address
87 utility must be used at boot time to define the network address
89 a later time to redefine an interface's address
93 .Bl -tag -width indent
120 The format is specified as a comma-separated list of
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/usb/ |
| H A D | usb251xb.txt | 1 Microchip USB 2.0 Hi-Speed Hub Controller
4 Hi-Speed Controller.
7 - compatible : Should be "microchip,usb251xb" or one of the specific types:
11 - reg : I2C address on the selected bus (default is <0x2C>)
14 - reset-gpios : Should specify the gpio for hub reset
15 - vdd-supply : Should specify the phandle to the regulator supplying vdd
16 - skip-config : Skip Hub configuration, but only send the USB-Attach command
17 - vendor-id : Set USB Vendor ID of the hub (16 bit, default is 0x0424)
18 - product-id : Set USB Product ID of the hub (16 bit, default depends on type)
19 - device-id : Set USB Device ID of the hub (16 bit, default is 0x0bb3)
[all …]
|
| /freebsd/contrib/ncurses/ |
| H A D | README.MinGW | 1 -------------------------------------------------------------------------------
2 -- Copyright 2020 Thomas E. Dickey --
3 -- Copyright 2008-2011,2012 Free Software Foundation, Inc. --
4 -- --
5 -- Permission is hereby granted, free of charge, to any person obtaining a --
6 -- copy of this software and associated documentation files (the --
7 -- "Software"), to deal in the Software without restriction, including --
8 -- without limitation the rights to use, copy, modify, merge, publish, --
9 -- distribute, distribute with modifications, sublicense, and/or sell copies --
10 -- of the Software, and to permit persons to whom the Software is furnished --
[all …]
|
| /freebsd/contrib/wpa/wpa_supplicant/ |
| H A D | config_ssid.h | 3 * Copyright (c) 2003-2013, Jouni Malinen <j@w1.fi>
17 #define DEFAULT_EAP_WORKAROUND ((unsigned int) -1)
31 #define DEFAULT_BG_SCAN_PERIOD -1
41 #define DEFAULT_TX_STBC -1 /* no change */
42 #define DEFAULT_RX_STBC -1 /* no change */
43 #define DEFAULT_DISABLE_MAX_AMSDU -1 /* no change */
44 #define DEFAULT_AMPDU_FACTOR -1 /* no change */
45 #define DEFAULT_AMPDU_DENSITY -1 /* no change */
47 #define DEFAULT_MAX_OPER_CHWIDTH -1
75 WPAS_MAC_ADDR_STYLE_NOT_SET = -1,
[all …]
|
| /freebsd/sys/net/ |
| H A D | sff8472.h | 1 /*-
2 * SPDX-License-Identifier: BSD-2-Clause
4 * Copyright (c) 2013 George V. Neville-Neil
17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
33 * The following set of constants are from Document SFF-8472
43 * 0-95 Serial ID Defined by SFP MSA
44 * 96-127 Vendor Specific Data
45 * 128-255 Reserved
48 * 0-55 Alarm and Warning Thresholds
[all …]
|
| /freebsd/sys/contrib/ncsw/inc/flib/ |
| H A D | fsl_fman_dtsec.h | 2 * Copyright 2008-2012 Freescale Semiconductor Inc.
12 * names of its contributors may be used to endorse or promote products
22 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
26 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
42 * To prepare dTSEC block for transfer use the following call sequence:
44 * - fman_dtsec_defconfig() - This step is optional and yet recommended. Its
45 * use is to obtain the default dTSEC configuration parameters.
47 * - Change dtsec configuration in &dtsec_cfg. This structure will be used
48 * to customize the dTSEC behavior.
50 * - fman_dtsec_init() - Applies the configuration on dTSEC hardware. Note that
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/sound/ |
| H A D | cs35l35.txt | 5 - compatible : "cirrus,cs35l35"
7 - reg : the I2C address of the device for I2C
9 - VA-supply, VP-supply : power supplies for the device,
13 - interrupts : IRQ line info CS35L35.
14 (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
15 for further information relating to interrupt properties)
17 - cirrus,boost-in
[all...] |
| /freebsd/secure/lib/libcrypto/man/man3/ |
| H A D | OPENSSL_ia32cap.3 | 1 .\" -*- mode: troff; coding: utf-8 -*-
35 .\" entries marked with X<> in POD. Of course, you'll have to process the
58 .TH OPENSSL_IA32CAP 3ossl 2025-09-30 3.5.4 OpenSSL
64 OPENSSL_ia32cap \- the x86[_64] processor capabilities vector
72 OpenSSL supports a range of x86[_64] instruction set extensions and
74 stored internally as ten 32\-bit capability vectors and for simplicity
75 represented logically below as five 64\-bit vectors. This logical
76 vector (LV) representation is used to streamline the definition of the
81 environment variable capability bit modifications are applied. After toolkit
82 initialization is complete, populated vectors are then used to choose
[all …]
|
| /freebsd/sys/contrib/dev/iwlwifi/fw/api/ |
| H A D | mac-cfg.h | 1 /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
3 * Copyright (C) 2012-2014, 2018-2019, 2021-2025 Intel Corporation
4 * Copyright (C) 2013-2015 Intel Mobile Communications GmbH
5 * Copyright (C) 2016-2017 Intel Deutschland GmbH
13 * enum iwl_mac_conf_subcmd_ids - mac configuration command IDs
104 * struct iwl_p2p_noa_attr - NOA attr contained in probe resp FW notification
127 * struct iwl_probe_resp_data_notif - notification with NOA and CSA counter
144 * struct iwl_missed_vap_notif - notification of missing vap detection
148 * @profile_periodicity: beacons period to have our profile inside
159 * struct iwl_channel_switch_start_notif_v1 - Channel switch start notification
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/clock/ti/ |
| H A D | ti,gate-clock.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only
3 ---
4 $id: http://devicetree.org/schemas/clock/ti/ti,gate-clock.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Tero Kristo <kristo@kernel.org>
15 This clock is quite much similar to the basic gate-clock [1], however,
18 will be controlled instead and the corresponding hw-ops for
21 [1] Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml
27 - ti,gate-clock # basic gate clock
28 - ti,wait-gate-clock # gate clock which waits until clock is
[all …]
|
| H A D | gate.txt | 4 quite much similar to the basic gate-clock [2], however,
7 will be controlled instead and the corresponding hw-ops for
10 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
11 [2] Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml
15 - compatible : shall be one of:
16 "ti,gate-clock" - basic gate clock
17 "ti,wait-gate-clock" - gate clock which waits until clock is active before
19 "ti,dss-gate-clock" - gate clock with DSS specific hardware handling
20 "ti,am35xx-gate-clock" - gate clock with AM35xx specific hardware handling
21 "ti,clkdm-gate-clock" - clockdomain gate clock, which derives its functional
[all …]
|
| /freebsd/sys/contrib/dev/athk/ath10k/ |
| H A D | wmi.h | 1 /* SPDX-License-Identifier: ISC */
3 * Copyright (c) 2005-2011 Atheros Communications Inc.
4 * Copyright (c) 2011-2017 Qualcomm Atheros, Inc.
5 * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
19 * messages from the host to the target. Events and Replies are messages
20 * from the target to the host.
22 * Ownership of correctness in regards to WMI commands belongs to the host
23 * driver and the target is not required to validate parameters for value,
28 * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff
34 * 3. DO NOT define bit fields within structures. Implement bit fields
[all …]
|
| /freebsd/crypto/openssl/apps/include/ |
| H A D | opt.h | 2 * Copyright 2018-2025 The OpenSSL Project Authors. All Rights Reserved.
17 #define OPT_COMMON OPT_ERR = -1, OPT_EOF = 0, OPT_HELP
38 { "policy", OPT_V_POLICY, 's', "adds policy to the acceptable policy set"}, \
53 { "ignore_critical", OPT_V_IGNORE_CRITICAL, '-', \
55 { "issuer_checks", OPT_V_ISSUER_CHECKS, '-', "(deprecated)"}, \
56 { "crl_check", OPT_V_CRL_CHECK, '-', "check leaf certificate revocation" }, \
57 { "crl_check_all", OPT_V_CRL_CHECK_ALL, '-', "check full chain revocation" }, \
58 { "policy_check", OPT_V_POLICY_CHECK, '-', "perform rfc5280 policy checks"}, \
59 { "explicit_policy", OPT_V_EXPLICIT_POLICY, '-', \
60 "set policy variable require-explicit-policy"}, \
[all …]
|