/linux/arch/arm/boot/dts/marvell/ |
H A D | mmp2-brownstone.dts | 1 // SPDX-License-Identifier: GPL-2.0-only 7 /dts-v1/; 12 compatible = "mrvl,mmp2-brownstone", "mrvl,mmp2"; 15 …t=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on"; 34 interrupt-parent = <&intcmux4>; 35 interrupt-controller; 36 #interrupt-cells = <1>; 37 maxim,tsc-irq = <0>; 41 regulator-min-microvolt = <637500>; 42 regulator-max-microvolt = <1425000>; [all …]
|
H A D | pxa910-dkb.dts | 1 // SPDX-License-Identifier: GPL-2.0-only 7 /dts-v1/; 12 compatible = "mrvl,pxa910-dkb", "mrvl,pxa910"; 15 …t=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on"; 34 interrupt-parent = <&intc>; 35 interrupt-controller; 36 #interrupt-cells = <1>; 38 marvell,88pm860x-irq-read-clr; 39 marvell,88pm860x-slave-addr = <0x11>; 43 regulator-min-microvolt = <1000000>; [all …]
|
/linux/arch/arm/boot/dts/rockchip/ |
H A D | rk3288-evb-rk808.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 3 /dts-v1/; 4 #include "rk3288-evb.dtsi" 8 compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288"; 12 clock-frequency = <400000>; 17 interrupt-parent = <&gpio0>; 19 pinctrl-names = "default"; 20 pinctrl-0 = <&pmic_int &global_pwroff>; 21 rockchip,system-power-controller; 22 wakeup-source; [all …]
|
/linux/Documentation/devicetree/bindings/mfd/ |
H A D | rockchip,rk806.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Sebastian Reichel <sebastian.reichel@collabora.com> 19 - rockchip,rk806 27 gpio-controller: true 29 '#gpio-cells': 32 system-power-controller: true 34 vcc1-supply: 36 The input supply for dcdc-reg1. [all …]
|
/linux/arch/arm64/boot/dts/rockchip/ |
H A D | px30-firefly-jd4-core.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 #include <dt-bindings/gpio/gpio.h> 7 #include <dt-bindings/pinctrl/rockchip.h> 11 compatible = "firefly,px30-jd4-core", "rockchip,px30"; 13 emmc_pwrseq: emmc-pwrseq { 14 compatible = "mmc-pwrseq-emmc"; 15 pinctrl-0 = <&emmc_reset>; 16 pinctrl-names = "default"; 17 reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>; 20 vcc5v0_sys: regulator-vcc5v0-sys { [all …]
|
H A D | rk3588-friendlyelec-cm3588.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 9 /dts-v1/; 11 #include <dt-bindings/gpio/gpio.h> 12 #include <dt-bindings/leds/common.h> 13 #include <dt-bindings/pinctrl/rockchip.h> 26 stdout-path = "serial2:1500000n8"; 30 compatible = "gpio-leds"; 32 led_sys: led-0 { 36 linux,default-trigger = "heartbeat"; 37 pinctrl-names = "default"; [all …]
|
H A D | rk3399-evb.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 /dts-v1/; 7 #include <dt-bindings/pwm/pwm.h> 8 #include "rk3399-base.dtsi" 12 compatible = "rockchip,rk3399-evb", "rockchip,rk3399"; 20 compatible = "pwm-backlight"; 21 brightness-levels = < 54 default-brightness-level = <200>; 58 edp_panel: edp-panel { 59 compatible = "lg,lp079qx1-sp0v"; [all …]
|
H A D | rk3588s-nanopi-r6.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 3 /dts-v1/; 5 #include <dt-bindings/pinctrl/rockchip.h> 6 #include <dt-bindings/gpio/gpio.h> 7 #include <dt-bindings/input/input.h> 8 #include <dt-bindings/soc/rockchip,vop2.h> 19 stdout-path = "serial2:1500000n8"; 22 adc-keys { 23 compatible = "adc-keys"; 24 io-channels = <&saradc 0>; [all …]
|
H A D | rk3588-jaguar.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 /dts-v1/; 7 #include <dt-bindings/gpio/gpio.h> 8 #include <dt-bindings/input/input.h> 9 #include <dt-bindings/leds/common.h> 10 #include <dt-bindings/pinctrl/rockchip.h> 11 #include <dt-bindings/soc/rockchip,vop2.h> 12 #include <dt-bindings/usb/pd.h> 16 model = "Theobroma Systems RK3588-SBC Jaguar"; 17 compatible = "tsd,rk3588-jaguar", "rockchip,rk3588"; [all …]
|
H A D | rk3588s-rock-5a.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 3 /dts-v1/; 5 #include <dt-bindings/gpio/gpio.h> 6 #include <dt-bindings/leds/common.h> 7 #include <dt-bindings/pinctrl/rockchip.h> 8 #include <dt-bindings/soc/rockchip,vop2.h> 13 compatible = "radxa,rock-5a", "rockchip,rk3588s"; 21 analog-sound { 22 compatible = "audio-graph-card"; 23 label = "rk3588-es8316"; [all …]
|
H A D | rk3588-tiger.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 #include <dt-bindings/gpio/gpio.h> 7 #include <dt-bindings/leds/common.h> 8 #include <dt-bindings/pinctrl/rockchip.h> 12 compatible = "tsd,rk3588-tiger", "rockchip,rk3588"; 20 emmc_pwrseq: emmc-pwrseq { 21 compatible = "mmc-pwrseq-emmc"; 22 pinctrl-0 = <&emmc_reset>; 23 pinctrl-names = "default"; 24 reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>; [all …]
|
H A D | rk3566-radxa-zero-3.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 3 #include <dt-bindings/gpio/gpio.h> 4 #include <dt-bindings/leds/common.h> 5 #include <dt-bindings/soc/rockchip,vop2.h> 10 stdout-path = "serial2:1500000n8"; 13 hdmi-con { 14 compatible = "hdmi-connector"; 19 remote-endpoint = <&hdmi_out_con>; 25 compatible = "gpio-leds"; 26 pinctrl-names = "default"; [all …]
|
H A D | rk3588-rock-5b.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 3 /dts-v1/; 5 #include <dt-bindings/gpio/gpio.h> 6 #include <dt-bindings/leds/common.h> 7 #include <dt-bindings/soc/rockchip,vop2.h> 12 compatible = "radxa,rock-5b", "rockchip,rk3588"; 21 stdout-path = "serial2:1500000n8"; 24 analog-sound { 25 compatible = "audio-graph-card"; 26 label = "rk3588-es8316"; [all …]
|
H A D | rk3566-lubancat-1.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 3 /dts-v1/; 4 #include <dt-bindings/gpio/gpio.h> 5 #include <dt-bindings/leds/common.h> 6 #include <dt-bindings/pinctrl/rockchip.h> 7 #include <dt-bindings/soc/rockchip,vop2.h> 12 compatible = "embedfire,lubancat-1", "rockchip,rk3566"; 21 stdout-path = "serial2:1500000n8"; 24 gmac1_clkin: external-gmac1-clock { 25 compatible = "fixed-clock"; [all …]
|
H A D | rk3588s-odroid-m2.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 3 /dts-v1/; 5 #include <dt-bindings/gpio/gpio.h> 6 #include <dt-bindings/leds/common.h> 7 #include <dt-bindings/pinctrl/rockchip.h> 8 #include <dt-bindings/soc/rockchip,vop2.h> 9 #include <dt-bindings/usb/pd.h> 13 model = "Hardkernel ODROID-M2"; 14 compatible = "hardkernel,odroid-m2", "rockchip,rk3588s"; 23 stdout-path = "serial2:1500000n8"; [all …]
|
/linux/Documentation/devicetree/bindings/regulator/ |
H A D | pv88060.txt | 1 * Powerventure Semiconductor PV88060 Voltage Regulator 4 - compatible: "pvs,pv88060". 5 - reg: I2C slave address, usually 0x49. 6 - interrupts: the interrupt outputs of the controller 7 - regulators: A node that houses a sub-node for each regulator within the 8 device. Each sub-node is identified using the node's name, with valid 9 values listed below. The content of each sub-node is defined by the 10 standard binding for regulators; see regulator.txt. 15 - Any optional property defined in regulator.txt 22 interrupt-parent = <&gpio>; [all …]
|
H A D | tps65090.txt | 4 - compatible: "ti,tps65090" 5 - reg: I2C slave address 6 - interrupts: the interrupt outputs of the controller 7 - regulators: A node that houses a sub-node for each regulator within the 8 device. Each sub-node is identified using the node's name, with valid 9 values listed below. The content of each sub-node is defined by the 10 standard binding for regulators; see regulator.txt. 11 dcdc[1-3], fet[1-7] and ldo[1-2] respectively. 12 - vsys[1-3]-supply: The input supply for DCDC[1-3] respectively. 13 - infet[1-7]-supply: The input supply for FET[1-7] respectively. [all …]
|
H A D | nxp,pf8x00-regulator.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/regulator/nxp,pf8x00-regulator.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Jagan Teki <jagan@amarulasolutions.com> 11 - Troy Kisky <troy.kisky@boundarydevices.com> 16 linear and one vsnvs regulators. It has built-in one time programmable 22 - nxp,pf8100 23 - nxp,pf8121a 24 - nxp,pf8200 [all …]
|
/linux/arch/arm/boot/dts/nxp/imx/ |
H A D | e60k02.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 4 * based on works 11 * found in ebook-readers like the Kobo Clara HD (with i.MX6SLL) and 14 #include <dt-bindings/input/input.h> 23 stdout-path = &uart1; 26 gpio_keys: gpio-keys { 27 compatible = "gpio-keys"; 29 key-power { 33 wakeup-source; 36 key-cover { [all …]
|
H A D | e70k02.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 4 * based on works 11 * found in ebook-readers like the Kobo Clara HD (with i.MX6SLL) and 14 #include <dt-bindings/input/input.h> 23 stdout-path = &uart1; 26 gpio_keys: gpio-keys { 27 compatible = "gpio-keys"; 29 key-power { 33 wakeup-source; 36 key-cover { [all …]
|
/linux/arch/arm/boot/dts/nvidia/ |
H A D | tegra114-tn7.dts | 1 // SPDX-License-Identifier: GPL-2.0 2 /dts-v1/; 4 #include <dt-bindings/input/input.h> 15 linux,initrd-start = <0x82000000>; 16 linux,initrd-end = <0x82800000>; 24 trusted-foundations { 25 compatible = "tlm,trusted-foundations"; 26 tlm,version-major = <2>; 27 tlm,version-minor = <8>; 40 avdd-dsi-csi-supply = <&vdd_1v2_ap>; [all …]
|
/linux/arch/arm64/boot/dts/freescale/ |
H A D | imx8mm-evkb.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 3 * Copyright 2019-2020 NXP 6 /dts-v1/; 8 #include "imx8mm-evk.dtsi" 12 compatible = "fsl,imx8mm-evkb", "fsl,imx8mm"; 16 /delete-node/ pmic@4b; 21 pinctrl-0 = <&pinctrl_pmic>; 22 pinctrl-names = "default"; 23 interrupt-parent = <&gpio1>; 29 regulator-name = "BUCK1"; [all …]
|
H A D | imx8mm-icore-mx8mm.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 9 compatible = "engicam,icore-mx8mm", "fsl,imx8mm"; 13 cpu-supply = <®_buck4>; 17 cpu-supply = <®_buck4>; 21 cpu-supply = <®_buck4>; 25 cpu-supply = <®_buck4>; 29 pinctrl-names = "default"; 30 pinctrl-0 = <&pinctrl_fec1>; 31 phy-mode = "rgmii-id"; 32 phy-handle = <ðphy>; [all …]
|
H A D | imx8mn-evk.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 /dts-v1/; 9 #include "imx8mn-evk.dtsi" 10 #include <dt-bindings/interrupt-controller/irq.h> 14 compatible = "fsl,imx8mn-evk", "fsl,imx8mn"; 18 cpu-supply = <&buck2>; 22 cpu-supply = <&buck2>; 26 cpu-supply = <&buck2>; 30 cpu-supply = <&buck2>; 37 pinctrl-names = "default"; [all …]
|
/linux/arch/arm/boot/dts/ti/omap/ |
H A D | am57xx-idk-common.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/ 6 #include "am57xx-industrial-grade.dtsi" 16 stdout-path = &uart3; 19 vmain: fixedregulator-vmain { 20 compatible = "regulator-fixed"; 21 regulator-name = "VMAIN"; 22 regulator-min-microvolt = <5000000>; 23 regulator-max-microvolt = <5000000>; 24 regulator-always-on; [all …]
|