Home
last modified time | relevance | path

Searched +full:redboot +full:- +full:fis (Results 1 – 25 of 34) sorted by relevance

12

/linux/Documentation/arch/arm/sa1100/
H A Dassabet.rst2 The Intel Assabet (SA-1110 evaluation) board
13 -------------------
25 -----------------------
39 John Dorsey has produced add-on patches to add support for Assabet and
42 RedBoot (http://sources.redhat.com/redboot/)
44 RedBoot is a bootloader developed by Red Hat based on the eCos RTOS
48 RedBoot is currently the recommended choice since it's the only one to have
51 Brief examples on how to boot Linux with RedBoot are shown below. But first
52 you need to have RedBoot installed in your flash memory. A known to work
53 precompiled RedBoot binary is available from the following location:
[all …]
/linux/Documentation/devicetree/bindings/mtd/partitions/
H A Dredboot-fis.yaml1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/mtd/partitions/redboot-fis.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: RedBoot FLASH Image System (FIS) Partitions
9 description: The FLASH Image System (FIS) directory is a flash description
10 format closely associated with the RedBoot boot loader.
17 - Linus Walleij <linus.walleij@linaro.org>
23 const: redboot-fis
25 fis-index-block:
[all …]
H A Dpartitions.yaml1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
14 - Miquel Raynal <miquel.raynal@bootlin.com>
17 - $ref: arm,arm-firmware-suite.yaml
18 - $ref: brcm,bcm4908-partitions.yaml
19 - $ref: brcm,bcm947xx-cfe-partitions.yaml
20 - $ref: fixed-partitions.yaml
21 - $ref: linksys,ns-partitions.yaml
22 - $ref: qcom,smem-part.yaml
[all …]
/linux/drivers/mtd/parsers/
H A Dredboot.c1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Parse RedBoot-style Flash Image System (FIS) tables and
7 * Copyright © 2001-2010 David Woodhouse <dwmw2@infradead.org>
26 unsigned char _pad[256 - (16 + 7 * sizeof(u32))];
41 /* RedBoot doesn't actually write the desc_cksum field yet AFAICT */ in redboot_checksum()
60 ret = of_property_read_u32(npart, "fis-index-block", &dirblock); in parse_redboot_of()
95 offset = master->size + directory * master->erasesize; in parse_redboot_partitions()
99 pr_notice("Failed to find a non-bad block to check for RedBoot partition table\n"); in parse_redboot_partitions()
100 return -EIO; in parse_redboot_partitions()
102 offset -= master->erasesize; in parse_redboot_partitions()
[all …]
H A DKconfig1 # SPDX-License-Identifier: GPL-2.0-only
19 tristate "Broadcom's U-Boot partition parser"
22 Broadcom uses a custom way of storing U-Boot environment variables.
23 They are placed inside U-Boot partition itself at unspecified offset.
44 <mtddef> := <mtd-id>:<partdef>[,<partdef>]
46 <mtd-id> := unique id used in mapping driver/device
47 <size> := standard linux memsize OR "-" to denote all
57 1 flash resource (mtd-id "sa1100"), with 1 single writable partition:
58 mtdparts=sa1100:-
60 Same flash, but 2 named partitions, the first one being read-only:
[all …]
/linux/arch/arm/boot/dts/intel/ixp/
H A Dintel-ixp42x-adi-coyote.dts1 // SPDX-License-Identifier: ISC
5 * Ethernet set-up from OpenWrt.
8 /dts-v1/;
10 #include "intel-ixp42x.dtsi"
11 #include <dt-bindings/input/input.h>
16 #address-cells = <1>;
17 #size-cells = <1>;
27 stdout-path = "uart1:115200n8";
39 compatible = "intel,ixp4xx-flash", "cfi-flash";
40 bank-width = <2>;
[all …]
H A Dintel-ixp42x-ixdpg425.dts1 // SPDX-License-Identifier: ISC
5 * Ethernet set-up from OpenWrt.
15 /dts-v1/;
17 #include "intel-ixp42x.dtsi"
18 #include <dt-bindings/input/input.h>
23 #address-cells = <1>;
24 #size-cells = <1>;
34 stdout-path = "uart0:115200n8";
44 compatible = "intel,ixp4xx-flash", "cfi-flash";
45 bank-width = <2>;
[all …]
H A Dintel-ixp42x-netgear-wg302v1.dts1 // SPDX-License-Identifier: ISC
7 /dts-v1/;
9 #include "intel-ixp42x.dtsi"
10 #include <dt-bindings/input/input.h>
15 #address-cells = <1>;
16 #size-cells = <1>;
25 /* The RedBoot comes up in 9600 baud so let's keep this */
27 stdout-path = "uart1:9600n8";
38 compatible = "intel,ixp4xx-flash", "cfi-flash";
39 bank-width = <2>;
[all …]
H A Dintel-ixp46x-ixdp465.dts1 // SPDX-License-Identifier: ISC
7 /dts-v1/;
9 #include "intel-ixp45x-ixp46x.dtsi"
10 #include "intel-ixp4xx-reference-design.dtsi"
11 #include <dt-bindings/input/input.h>
16 #address-cells = <1>;
17 #size-cells = <1>;
22 compatible = "intel,ixp4xx-flash", "cfi-flash";
23 bank-width = <2>;
25 intel,ixp4xx-eb-write-enable = <1>;
[all …]
H A Dintel-ixp43x-kixrp435.dts1 // SPDX-License-Identifier: ISC
7 /dts-v1/;
9 #include "intel-ixp43x.dtsi"
10 #include "intel-ixp4xx-reference-design.dtsi"
11 #include <dt-bindings/input/input.h>
16 #address-cells = <1>;
17 #size-cells = <1>;
22 compatible = "intel,ixp4xx-flash", "cfi-flash";
23 bank-width = <2>;
25 intel,ixp4xx-eb-write-enable = <1>;
[all …]
H A Dintel-ixp42x-ixdp425.dts1 // SPDX-License-Identifier: ISC
11 /dts-v1/;
13 #include "intel-ixp42x.dtsi"
14 #include "intel-ixp4xx-reference-design.dtsi"
15 #include <dt-bindings/input/input.h>
20 #address-cells = <1>;
21 #size-cells = <1>;
26 compatible = "intel,ixp4xx-flash", "cfi-flash";
27 bank-width = <2>;
29 intel,ixp4xx-eb-write-enable = <1>;
[all …]
H A Dintel-ixp42x-welltech-epbx100.dts1 // SPDX-License-Identifier: GPL-2.0
6 /dts-v1/;
8 #include "intel-ixp42x.dtsi"
13 #address-cells = <1>;
14 #size-cells = <1>;
24 stdout-path = "uart0:115200n8";
34 compatible = "intel,ixp4xx-flash", "cfi-flash";
35 bank-width = <2>;
42 compatible = "fixed-partitions";
43 #address-cells = <1>;
[all …]
H A Dintel-ixp42x-gateway-7001.dts1 // SPDX-License-Identifier: ISC
7 /dts-v1/;
9 #include "intel-ixp42x.dtsi"
10 #include <dt-bindings/input/input.h>
15 #address-cells = <1>;
16 #size-cells = <1>;
26 stdout-path = "uart1:115200n8";
37 compatible = "intel,ixp4xx-flash", "cfi-flash";
38 bank-width = <2>;
45 intel,ixp4xx-eb-write-enable = <1>;
[all …]
H A Dintel-ixp42x-iomega-nas100d.dts1 // SPDX-License-Identifier: ISC
6 /dts-v1/;
8 #include "intel-ixp42x.dtsi"
9 #include <dt-bindings/input/input.h>
13 compatible = "iom,nas-100d", "intel,ixp42x";
14 #address-cells = <1>;
15 #size-cells = <1>;
25 stdout-path = "uart0:115200n8";
33 compatible = "gpio-leds";
34 led-wlan {
[all …]
H A Dintel-ixp42x-dlink-dsm-g600.dts1 // SPDX-License-Identifier: ISC
3 * Device Tree file for D-Link DSM-G600 revision A based on IXP420
11 /dts-v1/;
13 #include "intel-ixp42x.dtsi"
14 #include <dt-bindings/input/input.h>
17 model = "D-Link DSM-G600 rev A";
18 compatible = "dlink,dsm-g600-a", "intel,ixp42x";
19 #address-cells = <1>;
20 #size-cells = <1>;
30 stdout-path = "uart0:115200n8";
[all …]
H A Dintel-ixp42x-linksys-nslu2.dts1 // SPDX-License-Identifier: ISC
6 /dts-v1/;
8 #include "intel-ixp42x.dtsi"
9 #include <dt-bindings/input/input.h>
14 #address-cells = <1>;
15 #size-cells = <1>;
25 stdout-path = "uart0:115200n8";
33 compatible = "gpio-leds";
34 led-status {
37 default-state = "on";
[all …]
H A Dintel-ixp42x-arcom-vulcan.dts1 // SPDX-License-Identifier: ISC
8 /dts-v1/;
10 #include "intel-ixp42x.dtsi"
11 #include <dt-bindings/input/input.h>
16 #address-cells = <1>;
17 #size-cells = <1>;
27 stdout-path = "uart0:115200n8";
35 compatible = "w1-gpio";
42 compatible = "intel,ixp4xx-flash", "cfi-flash";
43 bank-width = <2>;
[all …]
H A Dintel-ixp42x-gateworks-gw2348.dts1 // SPDX-License-Identifier: ISC
7 /dts-v1/;
9 #include "intel-ixp42x.dtsi"
10 #include <dt-bindings/input/input.h>
15 #address-cells = <1>;
16 #size-cells = <1>;
25 stdout-path = "uart0:115200n8";
33 compatible = "gpio-leds";
34 led-user {
37 default-state = "on";
[all …]
/linux/arch/arm/boot/dts/marvell/
H A Darmada-385-synology-ds116.dts1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
8 /dts-v1/;
9 #include "armada-385.dtsi"
10 #include <dt-bindings/gpio/gpio.h>
14 compatible = "marvell,a385-gp", "marvell,armada385", "marvell,armada380";
17 stdout-path = "serial0:115200n8";
32 internal-regs {
34 pinctrl-names = "default";
35 pinctrl-0 = <&i2c0_pins>;
37 clock-frequency = <100000>;
[all …]
/linux/arch/arm/boot/dts/gemini/
H A Dgemini-ns2502.dts1 // SPDX-License-Identifier: GPL-2.0
7 /dts-v1/;
12 model = "Edimax NS-2502";
13 compatible = "edimax,ns-2502", "cortina,gemini";
14 #address-cells = <1>;
15 #size-cells = <1>;
24 mdio-gpio0 = &mdio0;
29 stdout-path = &uart0;
33 compatible = "virtual,mdio-gpio";
36 #address-cells = <1>;
[all …]
H A Dgemini-ssi1328.dts1 // SPDX-License-Identifier: GPL-2.0
7 /dts-v1/;
14 #address-cells = <1>;
15 #size-cells = <1>;
24 mdio-gpio0 = &mdio0;
29 stdout-path = &uart0;
33 compatible = "virtual,mdio-gpio";
36 #address-cells = <1>;
37 #size-cells = <0>;
40 phy0: ethernet-phy@1 {
[all …]
H A Dgemini-wbd111.dts1 // SPDX-License-Identifier: GPL-2.0
3 * Device Tree file for Wiliboard WBD-111
6 /dts-v1/;
9 #include <dt-bindings/input/input.h>
12 model = "Wiliboard WBD-111";
13 compatible = "wiligear,wiliboard-wbd111", "cortina,gemini";
14 #address-cells = <1>;
15 #size-cells = <1>;
25 stdout-path = &uart0;
29 compatible = "gpio-keys";
[all …]
H A Dgemini-wbd222.dts1 // SPDX-License-Identifier: GPL-2.0
3 * Device Tree file for Wiliboard WBD-222
6 /dts-v1/;
9 #include <dt-bindings/input/input.h>
12 model = "Wiliboard WBD-222";
13 compatible = "wiligear,wiliboard-wbd222", "cortina,gemini";
14 #address-cells = <1>;
15 #size-cells = <1>;
24 stdout-path = &uart0;
28 compatible = "gpio-keys";
[all …]
H A Dgemini-nas4220b.dts1 // SPDX-License-Identifier: GPL-2.0
3 * Device Tree file for the Gemini-based Raidsonic NAS IB-4220-B
6 /dts-v1/;
9 #include <dt-bindings/input/input.h>
12 model = "Raidsonic NAS IB-4220-B";
13 compatible = "raidsonic,ib-4220-b", "cortina,gemini";
14 #address-cells = <1>;
15 #size-cells = <1>;
24 stdout-path = &uart0;
28 compatible = "gpio-keys";
[all …]
H A Dgemini-sq201.dts1 // SPDX-License-Identifier: GPL-2.0
6 /dts-v1/;
9 #include <dt-bindings/input/input.h>
14 #address-cells = <1>;
15 #size-cells = <1>;
24 stdout-path = &uart0;
28 compatible = "gpio-keys";
30 button-setup {
31 debounce-interval = <100>;
32 wakeup-source;
[all …]

12