xref: /linux/Documentation/devicetree/bindings/net/pcs/snps,dw-xpcs.yaml (revision a1ff5a7d78a036d6c2178ee5acd6ba4946243800) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/net/pcs/snps,dw-xpcs.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Synopsys DesignWare Ethernet PCS
8
9maintainers:
10  - Serge Semin <fancer.lancer@gmail.com>
11
12description:
13  Synopsys DesignWare Ethernet Physical Coding Sublayer provides an interface
14  between Media Access Control and Physical Medium Attachment Sublayer through
15  the Media Independent Interface (XGMII, USXGMII, XLGMII, GMII, etc)
16  controlled by means of the IEEE std. Clause 45 registers set. The PCS can be
17  optionally synthesized with a vendor-specific interface connected to
18  Synopsys PMA (also called DesignWare Consumer/Enterprise PHY) although in
19  general it can be used to communicate with any compatible PHY.
20
21  The PCS CSRs can be accessible either over the Ethernet MDIO bus or directly
22  by means of the APB3/MCI interfaces. In the later case the XPCS can be mapped
23  right to the system IO memory space.
24
25properties:
26  compatible:
27    oneOf:
28      - description: Synopsys DesignWare XPCS with none or unknown PMA
29        const: snps,dw-xpcs
30      - description: Synopsys DesignWare XPCS with Consumer Gen1 3G PMA
31        const: snps,dw-xpcs-gen1-3g
32      - description: Synopsys DesignWare XPCS with Consumer Gen2 3G PMA
33        const: snps,dw-xpcs-gen2-3g
34      - description: Synopsys DesignWare XPCS with Consumer Gen2 6G PMA
35        const: snps,dw-xpcs-gen2-6g
36      - description: Synopsys DesignWare XPCS with Consumer Gen4 3G PMA
37        const: snps,dw-xpcs-gen4-3g
38      - description: Synopsys DesignWare XPCS with Consumer Gen4 6G PMA
39        const: snps,dw-xpcs-gen4-6g
40      - description: Synopsys DesignWare XPCS with Consumer Gen5 10G PMA
41        const: snps,dw-xpcs-gen5-10g
42      - description: Synopsys DesignWare XPCS with Consumer Gen5 12G PMA
43        const: snps,dw-xpcs-gen5-12g
44
45  reg:
46    items:
47      - description:
48          In case of the MDIO management interface this just a 5-bits ID
49          of the MDIO bus device. If DW XPCS CSRs space is accessed over the
50          MCI or APB3 management interfaces, then the space mapping can be
51          either 'direct' or 'indirect'. In the former case all Clause 45
52          registers are contiguously mapped within the address space
53          MMD '[20:16]', Reg '[15:0]'. In the later case the space is divided
54          to the multiple 256 register sets. There is a special viewport CSR
55          which is responsible for the set selection. The upper part of
56          the CSR address MMD+REG[20:8] is supposed to be written in there
57          so the corresponding subset would be mapped to the lowest 255 CSRs.
58
59  reg-names:
60    items:
61      - enum: [ direct, indirect ]
62
63  reg-io-width:
64    description:
65      The way the CSRs are mapped to the memory is platform depended. Since
66      each Clause 45 CSR is of 16-bits wide the access instructions must be
67      two bytes aligned at least.
68    default: 2
69    enum: [ 2, 4 ]
70
71  interrupts:
72    description:
73      System interface interrupt output (sbd_intr_o) indicating Clause 73/37
74      auto-negotiation events':' Page received, AN is completed or incompatible
75      link partner.
76    maxItems: 1
77
78  clocks:
79    description:
80      The MCI and APB3 interfaces are supposed to be equipped with a clock
81      source connected to the clk_csr_i line.
82
83      PCS/PMA layer can be clocked by an internal reference clock source
84      (phyN_core_refclk) or by an externally connected (phyN_pad_refclk) clock
85      generator. Both clocks can be supplied at a time.
86    minItems: 1
87    maxItems: 3
88
89  clock-names:
90    oneOf:
91      - minItems: 1
92        items: # MDIO
93          - enum: [core, pad]
94          - const: pad
95      - minItems: 1
96        items: # MCI or APB
97          - const: csr
98          - enum: [core, pad]
99          - const: pad
100
101required:
102  - compatible
103  - reg
104
105additionalProperties: false
106
107examples:
108  - |
109    #include <dt-bindings/interrupt-controller/irq.h>
110
111    ethernet-pcs@1f05d000 {
112      compatible = "snps,dw-xpcs";
113      reg = <0x1f05d000 0x1000>;
114      reg-names = "indirect";
115
116      reg-io-width = <4>;
117
118      interrupts = <79 IRQ_TYPE_LEVEL_HIGH>;
119
120      clocks = <&ccu_pclk>, <&ccu_core>, <&ccu_pad>;
121      clock-names = "csr", "core", "pad";
122    };
123  - |
124    mdio-bus {
125      #address-cells = <1>;
126      #size-cells = <0>;
127
128      ethernet-pcs@0 {
129        compatible = "snps,dw-xpcs";
130        reg = <0>;
131
132        clocks = <&ccu_core>, <&ccu_pad>;
133        clock-names = "core", "pad";
134      };
135    };
136...
137