| /freebsd/sys/contrib/device-tree/Bindings/phy/ |
| H A D | qcom,qmp-pcie-phy.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/phy/qcom,qmp-pcie-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Qualcomm QMP PHY controller (PCIe)
10 - Vinod Koul <vkoul@kernel.org>
13 QMP PHY controller supports physical layer functionality for a number of
14 controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
19 - qcom,ipq6018-qmp-pcie-phy
20 - qcom,ipq8074-qmp-gen3-pcie-phy
[all …]
|
| H A D | qcom,sc8280xp-qmp-pcie-phy.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/phy/qcom,sc8280xp-qmp-pcie-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Qualcomm QMP PHY controller (PCIe, SC8280XP)
10 - Vinod Koul <vkoul@kernel.org>
13 The QMP PHY controller supports physical layer functionality for a number of
14 controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
19 - qcom,sa8775p-qmp-gen4x2-pcie-phy
20 - qcom,sa8775p-qmp-gen4x4-pcie-phy
[all …]
|
| H A D | nvidia,tegra124-xusb-padctl.txt | 11 Some of the lanes are high-speed lanes, which can be used for PCIe, SATA or
12 super-speed USB. Other lanes are for various types of low-speed, full-speed
13 or high-speed USB (such as UTMI, ULPI and HSIC). The XUSB pad controller
14 contains a software-configurable mux that sits between the I/O controller
15 ports (e.g. PCIe) and the lanes.
17 In addition to per-lane configuration, USB 3.0 ports may require additional
18 settings on a per-board basis.
20 Pads will be represented as children of the top-level XUSB pad controller
23 PHY bindings, as described by the phy-bindings.txt file in this directory.
29 abstraction of the signals that are routed to a USB receptacle (i.e. a PHY
[all …]
|
| H A D | qcom,qmp-phy.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
4 ---
5 $id: "http://devicetree.org/schemas/phy/qcom,qmp-phy.yaml#"
6 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
8 title: Qualcomm QMP PHY controller
11 - Vinod Koul <vkoul@kernel.org>
14 QMP phy controller supports physical layer functionality for a number of
15 controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
20 - qcom,ipq6018-qmp-pcie-phy
21 - qcom,ipq6018-qmp-usb3-phy
[all …]
|
| H A D | hisilicon,phy-hi3670-pcie.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
4 $id: http://devicetree.org/schemas/phy/hisilicon,phy-hi3670-pcie.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: HiSilicon Kirin970 PCIe PHY
10 - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
13 Bindings for PCIe PHY on HiSilicon Kirin 970.
17 const: hisilicon,hi970-pcie-phy
19 "#phy-cells":
24 description: PHY Control registers
[all …]
|
| H A D | airoha,en7581-pcie-phy.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/phy/airoha,en7581-pcie-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Airoha EN7581 PCI-Express PHY
10 - Lorenzo Bianconi <lorenzo@kernel.org>
13 The PCIe PHY supports physical layer functionality for PCIe Gen2/Gen3 port.
17 const: airoha,en7581-pcie-phy
21 - description: PCIE analog base address
22 - description: PCIE lane0 base address
[all …]
|
| H A D | socionext,uniphier-pcie-phy.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/phy/socionext,uniphier-pcie-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Socionext UniPhier PCIe PHY
10 This describes the devicetree bindings for PHY interface built into
11 PCIe controller implemented on Socionext UniPhier SoCs.
14 - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
19 - socionext,uniphier-pro5-pcie-phy
20 - socionext,uniphier-ld20-pcie-phy
[all …]
|
| H A D | nvidia,tegra210-xusb-padctl.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
[all...] |
| H A D | qcom,ipq8074-qmp-pcie-phy.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/phy/qcom,ipq8074-qmp-pcie-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Qualcomm QMP PHY controller (PCIe, IPQ8074)
10 - Vinod Koul <vkoul@kernel.org>
13 QMP PHY controller supports physical layer functionality for a number of
14 controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
19 - qcom,ipq6018-qmp-pcie-phy
20 - qcom,ipq8074-qmp-gen3-pcie-phy
[all …]
|
| H A D | fsl,imx8-pcie-phy.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/phy/fsl,imx8-pcie-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Freescale i.MX8 SoC series PCIe PHY
10 - Richard Zhu <hongxing.zhu@nxp.com>
13 "#phy-cells":
18 - fsl,imx8mm-pcie-phy
19 - fsl,imx8mp-pcie-phy
27 clock-names:
[all …]
|
| H A D | nvidia,tegra124-xusb-padctl.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
4 $id: http://devicetree.org/schemas/phy/nvidia,tegra124-xusb-padctl.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Thierry Reding <thierry.reding@gmail.com>
11 - Jon Hunter <jonathanh@nvidia.com>
21 Some of the lanes are high-speed lanes, which can be used for PCIe, SATA or
22 super-speed USB. Other lanes are for various types of low-speed, full-speed
23 or high-speed USB (such as UTMI, ULPI and HSIC). The XUSB pad controller
24 contains a software-configurable mux that sits between the I/O controller
[all …]
|
| H A D | brcm,cygnus-pcie-phy.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
4 $id: http://devicetree.org/schemas/phy/brcm,cygnus-pcie-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Broadcom Cygnus PCIe PHY
10 - Ray Jui <ray.jui@broadcom.com>
11 - Scott Branden <scott.branden@broadcom.com>
15 pattern: "^pcie[-|_]phy(@.*)?$"
19 - const: brcm,cygnus-pcie-phy
24 Base address and length of the PCIe PHY block
[all …]
|
| H A D | lantiq,vrx200-pcie-phy.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/phy/lantiq,vrx200-pcie-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Lantiq VRX200 and ARX300 PCIe PHY
10 - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
13 "#phy-cells":
15 description: selects the PHY mode as defined in <dt-bindings/phy/phy-lantiq-vrx200-pcie.h>
19 - lantiq,vrx200-pcie-phy
20 - lantiq,arx300-pcie-phy
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/pci/ |
| H A D | rockchip-pcie-host.txt | 1 * Rockchip AXI PCIe Root Port Bridge DT description
4 - #address-cells: Address representation for root ports, set to <3>
5 - #size-cells: Size representation for root ports, set to <2>
6 - #interrupt-cells: specifies the number of cells needed to encode an
8 - compatible: Should contain "rockchip,rk3399-pcie"
9 - reg: Two register ranges as listed in the reg-names property
10 - reg-names: Must include the following names
11 - "axi-base"
12 - "apb-base"
13 - clocks: Must contain an entry for each entry in clock-names.
[all …]
|
| H A D | mediatek-pcie-gen3.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/pci/mediatek-pcie-gen3.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Gen3 PCIe controller on MediaTek SoCs
10 - Jianjun Wang <jianjun.wang@mediatek.com>
13 PCIe Gen3 MAC controller for MediaTek SoCs, it supports Gen3 speed
16 This PCIe controller supports up to 256 MSI vectors, the MSI hardware
19 +-----+
21 +-----+
[all …]
|
| H A D | brcm,iproc-pcie.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/pci/brcm,iproc-pcie.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Broadcom iProc PCIe controller with the platform bus interface
10 - Ray Jui <ray.jui@broadcom.com>
11 - Scott Branden <scott.branden@broadcom.com>
14 - $ref: /schemas/pci/pci-host-bridge.yaml#
19 - enum:
22 - brcm,iproc-pcie
[all …]
|
| H A D | fsl,imx6q-pcie.txt | 1 * Freescale i.MX6 PCIe interface
3 This PCIe host controller is based on the Synopsys DesignWare PCIe IP
4 and thus inherits all the common properties defined in designware-pcie.txt.
7 - compatible:
8 - "fsl,imx6q-pcie"
9 - "fsl,imx6sx-pcie",
10 - "fsl,imx6qp-pcie"
11 - "fsl,imx7d-pcie"
12 - "fsl,imx8mq-pcie"
13 - reg: base address and length of the PCIe controller
[all …]
|
| H A D | rockchip-pcie-ep.txt | 1 * Rockchip AXI PCIe Endpoint Controller DT description
4 - compatible: Should contain "rockchip,rk3399-pcie-ep"
5 - reg: Two register ranges as listed in the reg-names property
6 - reg-names: Must include the following names
7 - "apb-base"
8 - "mem-base"
9 - clocks: Must contain an entry for each entry in clock-names.
10 See ../clocks/clock-bindings.txt for details.
11 - clock-names: Must include the following entries:
12 - "aclk"
[all …]
|
| H A D | qcom,pcie.txt | 3 - compatible:
7 - "qcom,pcie-ipq8064" for ipq8064
8 - "qcom,pcie-ipq8064-v2" for ipq8064 rev 2 or ipq8065
9 - "qcom,pcie-apq8064" for apq8064
10 - "qcom,pcie-apq8084" for apq8084
11 - "qcom,pcie-msm8996" for msm8996 or apq8096
12 - "qcom,pcie-ipq4019" for ipq4019
13 - "qcom,pcie-ipq8074" for ipq8074
14 - "qcom,pcie-qcs404" for qcs404
15 - "qcom,pcie-sc8180x" for sc8180x
[all …]
|
| H A D | brcm,iproc-pcie.txt | 1 * Broadcom iProc PCIe controller with the platform bus interface
4 - compatible:
5 "brcm,iproc-pcie" for the first generation of PAXB based controller,
7 "brcm,iproc-pcie-paxb-v2" for the second generation of PAXB-based
9 "brcm,iproc-pcie-paxc" for the first generation of PAXC based
11 "brcm,iproc-pcie-paxc-v2" for the second generation of PAXC based
13 PAXB-based root complex is used for external endpoint devices. PAXC-based
15 - reg: base address and length of the PCIe controller I/O register space
16 - #interrupt-cells: set to <1>
17 - interrupt-map-mask and interrupt-map, standard PCI properties to define the
[all …]
|
| H A D | samsung,exynos5440-pcie.txt | 1 * Samsung Exynos 5440 PCIe interface
3 This PCIe host controller is based on the Synopsys DesignWare PCIe IP
4 and thus inherits all the common properties defined in designware-pcie.txt.
7 - compatible: "samsung,exynos5440-pcie"
8 - reg: base addresses and lengths of the PCIe controller,
9 - reg-names : First name should be set to "elbi".
12 NOTE: When using the "config" property, reg-names must be set.
13 - interrupts: A list of interrupt outputs for level interrupt,
15 - phys: From PHY binding. Phandle for the generic PHY.
16 Refer to Documentation/devicetree/bindings/phy/samsung-phy.txt
[all …]
|
| H A D | qcom,pcie.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/pci/qcom,pcie.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Bjorn Andersson <bjorn.andersson@linaro.org>
11 - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
14 Qualcomm PCIe root complex controller is based on the Synopsys DesignWare
15 PCIe IP.
20 - enum:
21 - qcom,pcie-apq8064
[all …]
|
| H A D | rockchip,rk3399-pcie-common.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/pci/rockchip,rk3399-pcie-common.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Rockchip AXI PCIe Bridge Common Properties
10 - Shawn Lin <shawn.lin@rock-chips.com>
14 maxItems: 2
19 clock-names:
21 - const: aclk
22 - const: aclk-perf
[all …]
|
| H A D | fsl,imx6q-pcie-common.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/pci/fsl,imx6q-pcie-common.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Freescale i.MX6 PCIe RC/EP controller
10 - Lucas Stach <l.stach@pengutronix.de>
11 - Richard Zhu <hongxing.zhu@nxp.com>
14 Generic Freescale i.MX PCIe Root Port and Endpoint controller
22 clock-names:
26 num-lanes:
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/pinctrl/ |
| H A D | nvidia,tegra124-xusb-padctl.txt | 6 required for PCIe and SATA, it lacks the flexibility to represent the features
7 needed for USB. For the new binding, see ../phy/nvidia,tegra-xusb-padctl.txt.
12 associated PHY that must be powered up before the pad can be used.
14 This document defines the device-specific binding for the XUSB pad controller.
16 Refer to pinctrl-bindings.txt in this directory for generic information about
17 pin controller device tree bindings and ../phy/phy-bindings.txt for details on
21 --------------------
22 - compatible: For Tegra124, must contain "nvidia,tegra124-xusb-padctl".
23 Otherwise, must contain '"nvidia,<chip>-xusb-padctl",
24 "nvidia-tegra124-xusb-padctl"', where <chip> is tegra132 or tegra210.
[all …]
|