Home
last modified time | relevance | path

Searched full:pad (Results 1 – 25 of 1522) sorted by relevance

12345678910>>...61

/freebsd/sys/arm/freescale/vybrid/
H A Dvf_iomuxc.h31 #define IOMUXC_PTA6 0x000 /* Software MUX Pad Control Register 0 */
32 #define IOMUXC_PTA8 0x004 /* Software MUX Pad Control Register 1 */
33 #define IOMUXC_PTA9 0x008 /* Software MUX Pad Control Register 2 */
34 #define IOMUXC_PTA10 0x00C /* Software MUX Pad Control Register 3 */
35 #define IOMUXC_PTA11 0x010 /* Software MUX Pad Control Register 4 */
36 #define IOMUXC_PTA12 0x014 /* Software MUX Pad Control Register 5 */
37 #define IOMUXC_PTA16 0x018 /* Software MUX Pad Control Register 6 */
38 #define IOMUXC_PTA17 0x01C /* Software MUX Pad Control Register 7 */
39 #define IOMUXC_PTA18 0x020 /* Software MUX Pad Control Register 8 */
40 #define IOMUXC_PTA19 0x024 /* Software MUX Pad Control Register 9 */
[all …]
/freebsd/sys/contrib/device-tree/Bindings/net/
H A Dmicrel-ksz90x1.txt25 corresponding pad skew register:
27 Device Tree Value Delay Pad Skew Register Value
48 - rxc-skew-ps : Skew control of RXC pad
49 - rxdv-skew-ps : Skew control of RX CTL pad
50 - txc-skew-ps : Skew control of TXC pad
51 - txen-skew-ps : Skew control of TX CTL pad
52 - rxd0-skew-ps : Skew control of RX data 0 pad
53 - rxd1-skew-ps : Skew control of RX data 1 pad
54 - rxd2-skew-ps : Skew control of RX data 2 pad
55 - rxd3-skew-ps : Skew control of RX data 3 pad
[all …]
/freebsd/contrib/ncurses/man/
H A Dcurs_pad.3x63 \fBint prefresh(WINDOW *\fIpad\fB, int \fIpminrow\fB, int \fIpmincol\fB,\fR
65 \fBint pnoutrefresh(WINDOW *\fIpad\fB, int \fIpminrow\fB, int \fIpmincol\fB,\fR
68 \fBint pechochar(WINDOW *\fIpad\fB, chtype \fIch\fB);\fR
69 \fBint pecho_wchar(WINDOW *\fIpad\fB, const cchar_t *\fIwch\fB);\fR
74 .I pad
90 \fB\%newpad\fP creates and returns a pointer to a new pad data structure
97 creates and returns a pointer to a subwindow within a pad
104 the new pad is placed at position
109 changes made to one pad can affect both.
123 of the pad and screen are involved.
[all …]
/freebsd/sys/contrib/device-tree/Bindings/mmc/
H A Dnvidia,tegra20-sdhci.txt51 - pinctrl-names, pinctrl-0, pinctrl-1 : Specify pad voltage
57 Tegra210 where pad config registers are in the pinmux register domain
62 - nvidia,pad-autocal-pull-up-offset-3v3,
63 nvidia,pad-autocal-pull-down-offset-3v3 : Specify drive strength
65 - nvidia,pad-autocal-pull-up-offset-1v8,
66 nvidia,pad-autocal-pull-down-offset-1v8 : Specify drive strength
68 - nvidia,pad-autocal-pull-up-offset-3v3-timeout,
69 nvidia,pad-autocal-pull-down-offset-3v3-timeout : Specify drive
72 - nvidia,pad-autocal-pull-up-offset-1v8-timeout,
73 nvidia,pad-autocal-pull-down-offset-1v8-timeout : Specify drive
[all …]
H A Dnvidia,tegra20-sdhci.yaml112 nvidia,pad-autocal-pull-down-offset-1v8:
117 nvidia,pad-autocal-pull-down-offset-1v8-timeout:
122 nvidia,pad-autocal-pull-down-offset-3v3:
127 nvidia,pad-autocal-pull-down-offset-3v3-timeout:
132 nvidia,pad-autocal-pull-down-offset-sdr104:
136 nvidia,pad-autocal-pull-down-offset-hs400:
140 nvidia,pad-autocal-pull-up-offset-1v8:
145 nvidia,pad-autocal-pull-up-offset-1v8-timeout:
150 nvidia,pad-autocal-pull-up-offset-3v3:
162 nvidia,pad-autocal-pull-up-offset-3v3-timeout:
[all …]
/freebsd/sys/arm64/nvidia/tegra210/
H A Dtegra210_xusbpadctl.c436 #define PAD(n, t, cn, rn, e, d) { \ macro
445 PAD("usb2", PADCTL_PAD_USB2, "trk", NULL, usb2_enable, usb2_disable),
446 PAD("hsic", PADCTL_PAD_HSIC, "trk", NULL, hsic_enable, hsic_disable),
447 PAD("pcie", PADCTL_PAD_PCIE, "pll", "phy", pcie_enable, pcie_disable),
448 PAD("sata", PADCTL_PAD_SATA, "pll", "phy", sata_enable, sata_disable),
467 struct padctl_pad *pad; member
543 uphy_pex_enable(struct padctl_softc *sc, struct padctl_pad *pad) in uphy_pex_enable() argument
555 rv = clk_enable(pad->clk); in uphy_pex_enable()
557 device_printf(sc->dev, "Cannot enable clock for pad '%s': %d\n", in uphy_pex_enable()
558 pad->name, rv); in uphy_pex_enable()
[all …]
/freebsd/contrib/ncurses/ncurses/widechar/
H A Dlib_pecho_wchar.c39 pecho_wchar(WINDOW *pad, const cchar_t *wch) in NCURSES_EXPORT()
41 T((T_CALLED("pecho_wchar(%p, %s)"), (void *) pad, _tracech_t(wch))); in NCURSES_EXPORT()
43 if (pad == 0) in NCURSES_EXPORT()
46 if (!IS_PAD(pad)) in NCURSES_EXPORT()
47 returnCode(wecho_wchar(pad, wch)); in NCURSES_EXPORT()
49 wadd_wch(pad, wch); in NCURSES_EXPORT()
50 prefresh(pad, pad->_pad._pad_y, in NCURSES_EXPORT()
51 pad->_pad._pad_x, in NCURSES_EXPORT()
52 pad->_pad._pad_top, in NCURSES_EXPORT()
53 pad->_pad._pad_left, in NCURSES_EXPORT()
[all …]
/freebsd/contrib/wpa/src/crypto/
H A Daes-omac1.c16 static void gf_mulx(u8 *pad) in gf_mulx() argument
20 carry = pad[0] & 0x80; in gf_mulx()
22 pad[i] = (pad[i] << 1) | (pad[i + 1] >> 7); in gf_mulx()
23 pad[AES_BLOCK_SIZE - 1] <<= 1; in gf_mulx()
25 pad[AES_BLOCK_SIZE - 1] ^= 0x87; in gf_mulx()
47 u8 cbc[AES_BLOCK_SIZE], pad[AES_BLOCK_SIZE]; in omac1_aes_vector() local
89 os_memset(pad, 0, AES_BLOCK_SIZE); in omac1_aes_vector()
90 aes_encrypt(ctx, pad, pad); in omac1_aes_vector()
91 gf_mulx(pad); in omac1_aes_vector()
109 gf_mulx(pad); in omac1_aes_vector()
[all …]
H A Daes-siv.c20 static void dbl(u8 *pad) in dbl() argument
24 carry = pad[0] & 0x80; in dbl()
26 pad[i] = (pad[i] << 1) | (pad[i + 1] >> 7); in dbl()
27 pad[AES_BLOCK_SIZE - 1] <<= 1; in dbl()
29 pad[AES_BLOCK_SIZE - 1] ^= 0x87; in dbl()
54 static void pad_block(u8 *pad, const u8 *addr, size_t len) in pad_block() argument
56 os_memset(pad, 0, AES_BLOCK_SIZE); in pad_block()
57 os_memcpy(pad, addr, len); in pad_block()
60 pad[len] = 0x80; in pad_block()
/freebsd/usr.sbin/cxgbetool/
H A Dreg_defs_t4.c5147 { "Pad", 11, 1 },
5151 { "Pad", 11, 1 },
5155 { "Pad", 11, 1 },
5159 { "Pad", 11, 1 },
5163 { "Pad", 11, 1 },
5167 { "Pad", 11, 1 },
5171 { "Pad", 11, 1 },
5175 { "Pad", 11, 1 },
5179 { "Pad", 11, 1 },
5183 { "Pad", 11, 1 },
[all …]
/freebsd/contrib/ncurses/ncurses/base/
H A Dlib_pad.c39 * newpad -- create a new pad
40 * pnoutrefresh -- refresh a pad, no update
41 * pechochar -- add a char to a pad and refresh
190 T(("pad being refreshed")); in pnoutrefresh()
194 _tracedump("...pad", win); in pnoutrefresh()
202 T(("pad being shifted by %d line(s)", displaced)); in pnoutrefresh()
209 * from the pad to newscr whenever the window is wide enough that in pnoutrefresh()
214 * really ugly. So. What we do is consider the pad "wide" if it in pnoutrefresh()
276 * Clean up debris from scrolling or resizing the pad, so we do not in pnoutrefresh()
298 * Use the pad's current position, if it will be visible. in pnoutrefresh()
[all …]
/freebsd/crypto/openssl/crypto/asn1/
H A Da_int.c51 * encoding, except if the first byte is >= 0x80 we need to add a zero pad.
63 * Padding is a little trickier too. If the first bytes is > 0x80 then we pad
65 * is non-zero we pad with 0xff. The reason for this distinction is that 0x80
70 * If |pad| is zero, the operation is effectively reduced to memcpy,
71 * and if |pad| is 0xff, then it performs two's complement, ~dst + 1.
77 size_t len, unsigned char pad) in twos_complement() argument
79 unsigned int carry = pad & 1; in twos_complement()
92 *(--dst) = (unsigned char)(carry += *(--src) ^ pad); in twos_complement()
100 unsigned int pad = 0; in i2c_ibuf() local
108 pad = 1; in i2c_ibuf()
[all …]
/freebsd/sys/contrib/device-tree/Bindings/arm/tegra/
H A Dnvidia,tegra186-pmc.txt42 == Pad Control ==
44 On Tegra SoCs a pad is a set of pins which are configured as a group.
46 used to set pad power state and signaling voltage. A pad can be either
48 voltage configuration varies depending on the pad in question. 3.3 V and
52 Pad configurations are described with pin configuration nodes which
70 - pins: A list of strings, each of which contains the name of a pad
74 - low-power-enable: Configure the pad into power down mode
75 - low-power-disable: Configure the pad into active mode
79 include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h.
86 Pad configuration state example:
H A Dnvidia,tegra186-pmc.yaml88 These are pad configuration nodes. On Tegra SoCs a pad is a set of
90 attribute of the hardware. The PMC can be used to set pad power
91 state and signaling voltage. A pad can be either in active or
93 configuration varies depending on the pad in question. 3.3 V and
97 Pad configurations are described with pin configuration nodes
125 description: Must contain the name of the pad(s) to be
129 description: Configure the pad into power down mode.
133 description: Configure the pad into active mode.
145 include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h
176 #include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
/freebsd/sys/contrib/libsodium/src/libsodium/crypto_auth/hmacsha256/
H A Dauth_hmacsha256.c40 unsigned char pad[64]; in crypto_auth_hmacsha256_init() local
52 memset(pad, 0x36, 64); in crypto_auth_hmacsha256_init()
54 pad[i] ^= key[i]; in crypto_auth_hmacsha256_init()
56 crypto_hash_sha256_update(&state->ictx, pad, 64); in crypto_auth_hmacsha256_init()
59 memset(pad, 0x5c, 64); in crypto_auth_hmacsha256_init()
61 pad[i] ^= key[i]; in crypto_auth_hmacsha256_init()
63 crypto_hash_sha256_update(&state->octx, pad, 64); in crypto_auth_hmacsha256_init()
65 sodium_memzero((void *) pad, sizeof pad); in crypto_auth_hmacsha256_init()
/freebsd/sys/contrib/libsodium/src/libsodium/crypto_auth/hmacsha512/
H A Dauth_hmacsha512.c40 unsigned char pad[128]; in crypto_auth_hmacsha512_init() local
52 memset(pad, 0x36, 128); in crypto_auth_hmacsha512_init()
54 pad[i] ^= key[i]; in crypto_auth_hmacsha512_init()
56 crypto_hash_sha512_update(&state->ictx, pad, 128); in crypto_auth_hmacsha512_init()
59 memset(pad, 0x5c, 128); in crypto_auth_hmacsha512_init()
61 pad[i] ^= key[i]; in crypto_auth_hmacsha512_init()
63 crypto_hash_sha512_update(&state->octx, pad, 128); in crypto_auth_hmacsha512_init()
65 sodium_memzero((void *) pad, sizeof pad); in crypto_auth_hmacsha512_init()
/freebsd/contrib/bsddialog/lib/
H A Dmenubox.c58 WINDOW *pad; /* pad for the private items */ member
59 int ypad; /* start pad line */
60 int ys, ye, xs, xe; /* pad pos */
308 wattron(m->pad, t.menu.desccolor); in drawseparators()
310 mvwhline(m->pad, i, 0, '-', m->line); in drawseparators()
312 mvwhline_set(m->pad, i, 0, WACS_HLINE, m->line); in drawseparators()
313 wattroff(m->pad, t.menu.desccolor); in drawseparators()
319 wmove(m->pad, i, (labellen < realw) ? realw/2 - labellen/2 : 0); in drawseparators()
320 wattron(m->pad, in drawseparators()
[all...]
/freebsd/sys/contrib/device-tree/Bindings/phy/
H A Dnvidia,tegra124-xusb-padctl.txt1 Device tree binding for NVIDIA Tegra XUSB pad controller
4 The Tegra XUSB pad controller manages a set of I/O lanes (with differential
6 is controlled by a HW block referred to as a "pad" in the Tegra hardware
7 documentation. Each such "pad" may control either one or multiple lanes,
13 or high-speed USB (such as UTMI, ULPI and HSIC). The XUSB pad controller
20 Pads will be represented as children of the top-level XUSB pad controller
21 device tree node. Each lane exposed by the pad will be represented by its
26 pad controller and the XUSB controller as "ports". This is confusing since
64 - vclamp-usb-supply: Bias rail for USB pad. Must supply 1.8 V.
70 - vclamp-usb-supply: Bias rail for USB pad. Must supply 1.8 V.
[all …]
H A Dnvidia,tegra186-xusb-padctl.yaml7 title: NVIDIA Tegra186 XUSB pad controller
14 The Tegra XUSB pad controller manages a set of I/O lanes (with differential
16 is controlled by a HW block referred to as a "pad" in the Tegra hardware
17 documentation. Each such "pad" may control either one or multiple lanes,
23 or high-speed USB (such as UTMI, ULPI and HSIC). The XUSB pad controller
30 Pads will be represented as children of the top-level XUSB pad controller
31 device tree node. Each lane exposed by the pad will be represented by its
36 pad controller and the XUSB controller as "ports". This is confusing since
49 - description: pad controller registers
54 - description: XUSB pad controller interrupt
[all …]
/freebsd/contrib/bearssl/src/x509/
H A Dasn1.t0115 addr: pad
379 \ and processed, but not the length. The first pad byte is set to the
381 \ exceeds 255 bytes, then a single 0 is written in the pad, and this
386 dup 255 > if skip-close-elt 0 addr-pad set8 0 ret then
387 dup addr-pad set8
388 addr-pad 1+ read-blob
392 \ value is returned, which is true (-1) if the OID value fits on the pad,
470 \ Add byte to current pad value. Offset is updated, or set to 0 on error.
471 : pad-append ( off val -- off )
473 over addr-pad + set8 1+ ;
[all …]
/freebsd/contrib/llvm-project/llvm/lib/Target/WebAssembly/
H A DWebAssemblyLateEHPrepare.cpp61 // Returns the nearest EH pad that dominates this instruction. This does not use
63 // EH pad. This assumes valid EH scopes so the first EH pad it arrives in all
65 // Returns nullptr in case it does not find any EH pad in the search, or finds
163 // Hoist catch instructions to the beginning of their matching EH pad BBs in
165 // (1) catch instruction is not the first instruction in EH pad.
170 // (2) catch instruction is in a non-EH pad BB. For example,
185 assert(EHPad && "No matching EH pad for catch"); in hoistCatches()
187 // Skip EH_LABELs in the beginning of an EH pad if present. We don't use in hoistCatches()
189 // EH_LABEL instruction in the beginning of an EH pad. in hoistCatches()
209 // Skip EH_LABELs in the beginning of an EH pad if present. in addCatchAlls()
[all …]
/freebsd/crypto/openssl/test/recipes/30-test_evp_data/
H A Devpciph_aes_wrap.txt59 Cipher = id-aes192-wrap-pad
64 Cipher = id-aes192-wrap-pad
132 Cipher = AES-128-WRAP-PAD-INV
138 Cipher = AES-128-WRAP-PAD-INV
145 Cipher = AES-192-WRAP-PAD-INV
152 Cipher = AES-256-WRAP-PAD-INV
159 Cipher = AES-128-WRAP-PAD-INV
165 Cipher = AES-192-WRAP-PAD-INV
171 Cipher = AES-256-WRAP-PAD-INV
/freebsd/crypto/openssl/crypto/bn/asm/
H A Dvia-mont.pl98 $pad=16*1; # amount of reserved bytes on top of every vector
110 # &DWP(64+(4*$num+$pad)*0,"esp") # padded tp[num]
111 # &DWP(64+(4*$num+$pad)*1,"esp") # padded copy of ap[num]
112 # &DWP(64+(4*$num+$pad)*2,"esp") # padded copy of bp[num]
113 # &DWP(64+(4*$num+$pad)*3,"esp") # padded copy of np[num]
141 &lea ("ecx",&DWP($pad,"","ecx",4)); # ecx becomes vector size in bytes
158 &lea ("ebp",&DWP(-$pad,"ecx"));
164 &lea ("ecx",&DWP((32+$pad)/4,"ecx"));# padded tp + scratch
168 &lea ("edi",&DWP(64+$pad,"esp","ecx",4));# pointer to ap copy
171 &mov ("ecx",$pad/4);
[all …]
/freebsd/contrib/llvm-project/llvm/lib/CodeGen/AsmPrinter/
H A DEHStreamer.h42 /// Structure holding a try-range and the associated landing pad.
44 // The index of the landing pad.
47 // The index of the begin and end labels in the landing pad's label lists.
66 // LPad contains the landing pad start labels.
67 const LandingPadInfo *LPad; // Null indicates that there is no landing pad.
94 /// landing pad site.
104 /// invoke has a try-range containing the call, a non-zero landing pad and an
106 /// containing the call and zero for the landing pad and the action. Calls
122 /// 1. The landing pad site information describes the range of code covered
125 /// pad that handles the exception once processed. Finally an index into
[all …]
/freebsd/crypto/openssl/test/recipes/
H A D15-test_rsaoaep.t50 '-pkeyopt', 'pad-mode:oaep',
63 '-pkeyopt', 'pad-mode:oaep',
75 '-pkeyopt', 'pad-mode:oaep',
85 '-pkeyopt', 'pad-mode:oaep',
98 '-pkeyopt', 'pad-mode:oaep',
109 '-pkeyopt', 'pad-mode:oaep',
121 '-pkeyopt', 'pad-mode:oaep',
133 '-pkeyopt', 'pad-mode:oaep',
145 '-pkeyopt', 'pad-mode:oaep',
154 '-pkeyopt', 'pad-mode:oaep',

12345678910>>...61