/linux/arch/powerpc/boot/dts/ |
H A D | mpc5200b.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-or-later 10 /dts-v1/; 15 #address-cells = <1>; 16 #size-cells = <1>; 17 interrupt-parent = <&mpc5200_pic>; 20 #address-cells = <1>; 21 #size-cells = <0>; 26 d-cache-line-size = <32>; 27 i-cache-line-size = <32>; 28 d-cache-size = <0x4000>; // L1, 16K [all …]
|
H A D | lite5200.dts | 1 // SPDX-License-Identifier: GPL-2.0-or-later 5 * Copyright 2006-2007 Secret Lab Technologies Ltd. 9 /dts-v1/; 14 #address-cells = <1>; 15 #size-cells = <1>; 16 interrupt-parent = <&mpc5200_pic>; 19 #address-cells = <1>; 20 #size-cells = <0>; 25 d-cache-line-size = <32>; 26 i-cache-line-size = <32>; [all …]
|
H A D | charon.dts | 1 // SPDX-License-Identifier: GPL-2.0-or-later 12 /dts-v1/; 17 #address-cells = <1>; 18 #size-cells = <1>; 19 interrupt-parent = <&mpc5200_pic>; 22 #address-cells = <1>; 23 #size-cells = <0>; 28 d-cache-line-size = <32>; 29 i-cache-line-size = <32>; 30 d-cache-size = <0x4000>; // L1, 16K [all …]
|
H A D | tqm5200.dts | 1 // SPDX-License-Identifier: GPL-2.0-or-later 9 /dts-v1/; 14 #address-cells = <1>; 15 #size-cells = <1>; 16 interrupt-parent = <&mpc5200_pic>; 19 #address-cells = <1>; 20 #size-cells = <0>; 25 d-cache-line-size = <32>; 26 i-cache-line-size = <32>; 27 d-cache-size = <0x4000>; // L1, 16K [all …]
|
H A D | a4m072.dts | 1 // SPDX-License-Identifier: GPL-2.0-or-later 14 &gpt0 { fsl,has-wdt; }; 15 &gpt3 { gpio-controller; }; 16 &gpt4 { gpio-controller; }; 17 &gpt5 { gpio-controller; }; 24 #address-cells = <1>; 25 #size-cells = <1>; 26 compatible = "fsl,mpc5200b-immr"; 29 bus-frequency = <0>; /* From boot loader */ 30 system-frequency = <0>; /* From boot loader */ [all …]
|
H A D | motionpro.dts | 1 // SPDX-License-Identifier: GPL-2.0-or-later 3 * Motion-PRO board Device Tree Source 11 &gpt0 { fsl,has-wdt; }; 12 &gpt6 { // Motion-PRO status LED 13 compatible = "promess,motionpro-led"; 14 label = "motionpro-statusled"; 15 blink-delay = <100>; // 100 msec 17 &gpt7 { // Motion-PRO ready LED 18 compatible = "promess,motionpro-led"; 19 label = "motionpro-readyled"; [all …]
|
H A D | cm5200.dts | 1 // SPDX-License-Identifier: GPL-2.0-or-later 11 &gpt0 { fsl,has-wdt; }; 27 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; 31 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; 35 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; 47 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; 51 phy-handle = <&phy0>; 55 phy0: ethernet-phy@0 { 64 i2c@3d00 { 75 // 16-bit flash device at LocalPlus Bus CS0 [all …]
|
H A D | uc101.dts | 1 // SPDX-License-Identifier: GPL-2.0-or-later 7 * Copyright 2006-2007 Secret Lab Technologies Ltd. 12 &gpt0 { gpio-controller; }; 13 &gpt1 { gpio-controller; }; 14 &gpt2 { gpio-controller; }; 15 &gpt3 { gpio-controller; }; 16 &gpt4 { gpio-controller; }; 17 &gpt5 { gpio-controller; }; 18 &gpt6 { gpio-controller; }; 19 &gpt7 { gpio-controller; }; [all …]
|
H A D | pcm030.dts | 1 // SPDX-License-Identifier: GPL-2.0-or-later 3 * phyCORE-MPC5200B-tiny (pcm030) board Device Tree Source 13 &gpt0 { fsl,has-wdt; }; 14 &gpt2 { gpio-controller; }; 15 &gpt3 { gpio-controller; }; 16 &gpt4 { gpio-controller; }; 17 &gpt5 { gpio-controller; }; 18 &gpt6 { gpio-controller; }; 19 &gpt7 { gpio-controller; }; 27 compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97"; [all …]
|
H A D | lite5200b.dts | 1 // SPDX-License-Identifier: GPL-2.0-or-later 5 * Copyright 2006-2007 Secret Lab Technologies Ltd. 11 &gpt0 { fsl,has-wdt; }; 12 &gpt2 { gpio-controller; }; 13 &gpt3 { gpio-controller; }; 20 compatible = "gpio-leds"; 26 linux,default-trigger = "heartbeat"; 40 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; 41 cell-index = <0>; 66 // compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97"; [all …]
|
H A D | mucmc52.dts | 1 // SPDX-License-Identifier: GPL-2.0-or-later 7 * Copyright 2006-2007 Secret Lab Technologies Ltd. 13 &gpt0 { gpio-controller; }; 14 &gpt1 { gpio-controller; }; 15 &gpt2 { gpio-controller; }; 16 &gpt3 { gpio-controller; }; 50 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; 54 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; 70 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; 74 phy-handle = <&phy0>; [all …]
|
H A D | a3m071.dts | 1 // SPDX-License-Identifier: GPL-2.0-or-later 16 &gpt0 { fsl,has-wdt; }; 23 #address-cells = <1>; 24 #size-cells = <1>; 25 compatible = "fsl,mpc5200b-immr"; 28 bus-frequency = <0>; /* From boot loader */ 29 system-frequency = <0>; /* From boot loader */ 40 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; 62 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; 68 phy-handle = <&phy0>; [all …]
|
H A D | digsy_mtc.dts | 1 // SPDX-License-Identifier: GPL-2.0-or-later 12 &gpt0 { gpio-controller; fsl,has-wdt; }; 13 &gpt1 { gpio-controller; }; 16 model = "intercontrol,digsy-mtc"; 17 compatible = "intercontrol,digsy-mtc"; 41 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; 45 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; 53 phy-handle = <&phy0>; 57 phy0: ethernet-phy@0 { 62 i2c@3d00 { [all …]
|
H A D | pcm032.dts | 1 // SPDX-License-Identifier: GPL-2.0-or-later 3 * phyCORE-MPC5200B-IO (pcm032) board Device Tree Source 5 * Copyright (C) 2006-2009 Pengutronix 11 &gpt0 { fsl,has-wdt; }; 12 &gpt2 { gpio-controller; }; 13 &gpt3 { gpio-controller; }; 14 &gpt4 { gpio-controller; }; 15 &gpt5 { gpio-controller; }; 16 &gpt6 { gpio-controller; }; 17 &gpt7 { gpio-controller; }; [all …]
|
/linux/Documentation/devicetree/bindings/powerpc/fsl/ |
H A D | mpc5200.txt | 1 MPC5200 Device Tree Bindings 2 ---------------------------- 4 (c) 2006-2009 Secret Lab Technologies Ltd 8 ------------------ 9 For mpc5200 on-chip devices, the format for each compatible value is 10 <chip>-<device>[-<mode>]. The OS should be able to match a device driver 15 The split between the MPC5200 and the MPC5200B leaves a bit of a 18 chip? For the MPC5200; the answer is easy. Most of the SoC devices 19 originally appeared on the MPC5200. Since they didn't exist anywhere 21 "fsl,mpc5200-<device>". [all …]
|
/linux/Documentation/devicetree/bindings/i2c/ |
H A D | i2c-mpc.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/i2c/i2c-mpc.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: I2C-Bus adapter for MPC824x/83xx/85xx/86xx/512x/52xx SoCs 10 - Chris Packham <chris.packham@alliedtelesis.co.nz> 13 - $ref: /schemas/i2c/i2c-controller.yaml# 18 - items: 19 - enum: 20 - mpc5200-i2c [all …]
|
/linux/sound/soc/fsl/ |
H A D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0-only 17 This option is only useful for out-of-tree drivers since 18 in-tree drivers select it automatically. 29 This option is only useful for out-of-tree drivers since 30 in-tree drivers select it automatically. 40 This option is only useful for out-of-tree drivers since 41 in-tree drivers select it automatically. 58 This option is only useful for out-of-tree drivers since 59 in-tree drivers select it automatically. 71 This option is only useful for out-of-tree drivers since [all …]
|
/linux/Documentation/devicetree/bindings/ |
H A D | incomplete-devices.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 3 --- 4 $id: http://devicetree.org/schemas/incomplete-devices.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Rob Herring <robh@kernel.org> 16 Examples are devices using ACPI PRP0001 with non-updatable firmware/ACPI 17 tables or old PowerPC platforms without in-tree DTS. 21 un-approved compatible. 29 - description: 30 Rejected compatibles in Devicetree, but used in ACPI-based devices [all …]
|
/linux/drivers/i2c/busses/ |
H A D | i2c-mpc.c | 1 // SPDX-License-Identifier: GPL-2.0 3 * This is a combined i2c adapter and algorithm driver for the 5 * the same I2C unit (8240, 8245, 85xx). 7 * Copyright (C) 2003-2004 Humboldt Solutions Ltd, adrian@humboldt.co.uk 25 #include <linux/i2c.h> 109 void (*setup)(struct device_node *node, struct mpc_i2c *i2c, u32 clock); 112 static inline void writeccr(struct mpc_i2c *i2c, u32 x) in writeccr() argument 114 writeb(x, i2c->base + MPC_I2C_CR); in writeccr() 122 static void mpc_i2c_fixup(struct mpc_i2c *i2c) in mpc_i2c_fixup() argument 127 for (k = 9; k; k--) { in mpc_i2c_fixup() [all …]
|
/linux/drivers/rtc/ |
H A D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0-only 44 This clock should be battery-backed, so that it reads the correct 45 time when the system boots from a power-off state. Otherwise, your 141 once-per-second update interrupts, used for synchronization. 159 will be called rtc-test. 161 comment "I2C RTC drivers" 163 if I2C 173 will be called rtc-88pm860x. 183 will be called rtc-88pm80x. 193 will be called rtc-88pm886. [all …]
|
/linux/drivers/watchdog/ |
H A D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0-only 16 on-line as fast as possible after a lock-up. There's both a watchdog 21 <file:Documentation/watchdog/watchdog-api.rst> in the kernel source. 51 bool "Update boot-enabled watchdog until userspace takes over" 77 bool "Enable watchdog hrtimer-based pretimeouts" 198 tristate "ChromeOS EC-based watchdog" 234 depends on I2C 244 depends on I2C 252 tristate "Watchdog device controlled through GPIO-line" 257 controlled through GPIO-line. [all …]
|