Home
last modified time | relevance | path

Searched +full:gpio2 +full:- +full:clk +full:- +full:out (Results 1 – 25 of 72) sorted by relevance

123

/linux/arch/arm64/boot/dts/freescale/
H A Dimx8mn-beacon-som.dtsi1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
6 #include "imx8mn-overdrive.dtsi"
16 compatible = "mmc-pwrseq-simple";
17 pinctrl-names = "default";
18 pinctrl-0 = <&pinctrl_usdhc1_gpio>;
19 reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
21 clock-names = "ext_clock";
22 post-power-on-delay-ms = <80>;
32 cpu-supply = <&buck2_reg>;
36 cpu-supply = <&buck2_reg>;
[all …]
H A Dimx8mm-beacon-som.dtsi1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
6 #include "imx8mm-overdrive.dtsi"
15 compatible = "mmc-pwrseq-simple";
16 pinctrl-names = "default";
17 pinctrl-0 = <&pinctrl_usdhc1_gpio>;
18 reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
20 clock-names = "ext_clock";
21 post-power-on-delay-ms = <80>;
31 cpu-supply = <&buck2_reg>;
35 cpu-supply = <&buck2_reg>;
[all …]
H A Dimx95-tqma9596sa-mb-smarc-2.dts1 // SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
3 * Copyright (c) 2024 TQ-Systems GmbH <linux@ew.tq-group.com>,
4 * D-82229 Seefeld, Germany.
8 /dts-v1/;
10 #include <dt-bindings/phy/phy-imx8-pcie.h>
11 #include "imx95-tqma9596sa.dtsi"
14 model = "TQ-Systems i.MX95 TQMa95xxSA on MB-SMARC-2";
15 compatible = "tq,imx95-tqma9596sa-mb-smarc-2", "tq,imx95-tqma9596sa", "fsl,imx95";
19 gpio1 = &gpio2;
20 gpio2 = &gpio3;
[all …]
H A Dimx8mm-venice-gw7902.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/linux-event-codes.h>
10 #include <dt-bindings/leds/common.h>
11 #include <dt-bindings/net/ti-dp83867.h>
12 #include <dt-bindings/phy/phy-imx8-pcie.h>
18 compatible = "gw,imx8mm-gw7902", "fsl,imx8mm";
29 stdout-path = &uart2;
38 compatible = "fixed-clock";
[all …]
H A Dimx8mq-hummingboard-pulse.dts1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
3 * Copyright (C) 2018 Jon Nettleton <jon@solid-run.com>
6 /dts-v1/;
8 #include "dt-bindings/usb/pd.h"
9 #include "imx8mq-sr-som.dtsi"
13 compatible = "solidrun,hummingboard-pulse", "fsl,imx8mq";
16 stdout-path = &uart1;
19 reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
20 compatible = "regulator-fixed";
21 pinctrl-names = "default";
[all …]
H A Dimx8mn-venice-gw7902.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/linux-event-codes.h>
10 #include <dt-bindings/leds/common.h>
11 #include <dt-bindings/net/ti-dp83867.h>
17 compatible = "gw,imx8mn-gw7902", "fsl,imx8mn";
26 stdout-path = &uart2;
35 compatible = "fixed-clock";
36 #clock-cells = <0>;
[all …]
H A Dimx8mp-beacon-kit.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include <dt-bindings/usb/pd.h>
9 #include <dt-bindings/phy/phy-imx8-pcie.h>
11 #include "imx8mp-beacon-som.dtsi"
15 compatible = "beacon,imx8mp-beacon-kit", "fsl,imx8mp";
23 stdout-path = &uart2;
26 clk_xtal25: clock-xtal25 {
27 compatible = "fixed-clock";
28 #clock-cells = <0>;
[all …]
H A Dimx8mn-beacon-kit.dts1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
6 /dts-v1/;
9 #include "imx8mn-beacon-som.dtsi"
10 #include "imx8mn-beacon-baseboard.dtsi"
14 compatible = "beacon,imx8mn-beacon-kit", "fsl,imx8mn";
17 stdout-path = &uart2;
21 compatible = "hdmi-connector";
26 remote-endpoint = <&adv7535_out>;
31 reg_hdmi: regulator-hdmi-dvdd {
32 compatible = "regulator-fixed";
[all …]
H A Dimx8mm-beacon-kit.dts1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
6 /dts-v1/;
9 #include "imx8mm-beacon-som.dtsi"
10 #include "imx8mm-beacon-baseboard.dtsi"
14 compatible = "beacon,imx8mm-beacon-kit", "fsl,imx8mm";
17 stdout-path = &uart2;
21 compatible = "hdmi-connector";
26 remote-endpoint = <&adv7535_out>;
31 reg_hdmi: regulator-hdmi-dvdd {
32 compatible = "regulator-fixed";
[all …]
H A Dimx8mm-var-som.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
10 model = "Variscite VAR-SOM-MX8MM module";
13 stdout-path = &uart4;
21 reg_eth_phy: regulator-eth-phy {
22 compatible = "regulator-fixed";
23 pinctrl-names = "default";
24 pinctrl-0 = <&pinctrl_reg_eth_phy>;
25 regulator-name = "eth_phy_pwr";
26 regulator-min-microvolt = <3300000>;
27 regulator-max-microvolt = <3300000>;
[all …]
H A Dimx95-tqma9596sa.dtsi1 // SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
3 * Copyright (c) 2024 TQ-Systems GmbH <linux@ew.tq-group.com>,
4 * D-82229 Seefeld, Germany.
8 /dts-v1/;
10 #include <dt-bindings/net/ti-dp83867.h>
11 #include <dt-bindings/phy/phy-imx8-pcie.h>
12 #include <dt-bindings/usb/pd.h>
30 reserved-memory {
31 #address-cells = <2>;
32 #size-cells = <2>;
[all …]
H A Dimx8mm-data-modul-edm-sbc.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include <dt-bindings/net/qca-ar803x.h>
9 #include <dt-bindings/phy/phy-imx8-pcie.h>
14 compatible = "dmo,imx8mm-data-modul-edm-sbc", "fsl,imx8mm";
22 stdout-path = &uart3;
32 compatible = "pwm-backlight";
33 pinctrl-names = "default";
34 pinctrl-0 = <&pinctrl_panel_backlight>;
35 brightness-levels = <0 1 10 20 30 40 50 60 70 75 80 90 100>;
[all …]
H A Dimx8mm-venice-gw7903.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/linux-event-codes.h>
10 #include <dt-bindings/leds/common.h>
11 #include <dt-bindings/phy/phy-imx8-pcie.h>
17 compatible = "gw,imx8mm-gw7903", "fsl,imx8mm";
27 stdout-path = &uart2;
35 gpio-keys {
36 compatible = "gpio-keys";
[all …]
H A Dimx8mp-dhcom-som.dtsi1 // SPDX-License-Identifier: GPL-2.0
3 * Copyright (C) 2021-2022 Marek Vasut <marex@denx.de>
10 compatible = "dh,imx8mp-dhcom-som", "fsl,imx8mp";
22 /* Memory size 512 MiB..8 GiB will be filled by U-Boot */
26 reg_eth_vio: regulator-eth-vio {
27 compatible = "regulator-fixed";
29 regulator-always-on;
30 regulator-boot-on;
31 regulator-min-microvolt = <3300000>;
32 regulator-max-microvolt = <3300000>;
[all …]
H A Dimx8mn-bsh-smm-s2-common.dtsi1 // SPDX-License-Identifier: GPL-2.0+
7 /dts-v1/;
10 #include "imx8mn-bsh-smm-s2-display.dtsi"
14 stdout-path = &uart4;
17 fec_supply: fec-supply-en {
18 compatible = "regulator-fixed";
19 vin-supply = <&buck4_reg>;
20 regulator-name = "tja1101_en";
21 regulator-min-microvolt = <3300000>;
22 regulator-max-microvolt = <3300000>;
[all …]
/linux/Documentation/devicetree/bindings/sound/
H A Drealtek,rt5682s.yaml1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Derek Fang <derek.fang@realtek.com>
13 Rt5682s(ALC5682I-VS) is a rt5682i variant which supports I2C only.
16 - $ref: dai-common.yaml#
30 realtek,dmic1-data-pin:
33 - 0 # dmic1 data is not used
34 - 1 # using GPIO2 pin as dmic1 data pin
35 - 2 # using GPIO5 pin as dmic1 data pin
[all …]
/linux/arch/arm/boot/dts/nxp/imx/
H A Dimx6q-tbs2910.dts1 // SPDX-License-Identifier: GPL-2.0+ OR MIT
5 /dts-v1/;
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/input.h>
13 compatible = "tbs,imx6q-tbs2910", "fsl,imx6q";
16 stdout-path = &uart1;
23 /delete-property/ mmc3;
32 compatible = "gpio-fan";
33 pinctrl-names = "default";
34 pinctrl-0 = <&pinctrl_gpio_fan>;
[all …]
H A Dimx6ull-dhcor-maveo-box.dts1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
7 * DHCR-iMX6ULL-C080-R051-SPI-WBT-I-01LG
8 * DHCOR PCB number: 578-200 or newer
9 * maveo box PCB number: 525-200 or newer
12 /dts-v1/;
14 #include "imx6ull-dhcor-som.dtsi"
18 compatible = "marantec,imx6ull-dhcor-maveo-box", "dh,imx6ull-dhcor-som",
28 stdout-path = "serial0:115200n8";
31 reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
32 compatible = "regulator-fixed";
[all …]
/linux/arch/mips/boot/dts/img/
H A Dpistachio.dtsi1 // SPDX-License-Identifier: GPL-2.0-only
7 #include <dt-bindings/clock/pistachio-clk.h>
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/interrupt-controller/irq.h>
10 #include <dt-bindings/interrupt-controller/mips-gic.h>
11 #include <dt-bindings/reset/pistachio-resets.h>
16 #address-cells = <1>;
17 #size-cells = <1>;
19 interrupt-parent = <&gic>;
22 #address-cells = <1>;
[all …]
/linux/arch/arm64/boot/dts/rockchip/
H A Drk3318-a95x-z2.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 /dts-v1/;
4 #include <dt-bindings/input/input.h>
9 compatible = "zkmagic,a95x-z2", "rockchip,rk3318";
19 stdout-path = "serial2:1500000n8";
22 adc-keys {
23 compatible = "adc-keys";
24 io-channels = <&saradc 0>;
25 io-channel-names = "buttons";
26 keyup-threshold-microvolt = <1800000>;
[all …]
H A Drk3399-gru.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
5 * Copyright 2016-2017 Google, Inc
8 #include <dt-bindings/input/input.h>
9 #include "rk3399-op1.dtsi"
18 stdout-path = "serial2:115200n8";
24 * In general an attempt is made to include all rails called out by
27 * - Rails that only connect to the EC (or devices that the EC talks to)
29 * - Rails _are_ included if the rails go to the AP even if the AP
38 * - The EC controls the enable and the EC always enables a rail as
40 * - The rails are actually connected to each other by a jumper and
[all …]
/linux/arch/arm64/boot/dts/renesas/
H A Dulcb.dtsi1 // SPDX-License-Identifier: GPL-2.0
3 * Device Tree Source for the R-Car Gen3 ULCB board
10 * > amixer set "DVC Out" 1%
14 #include <dt-bindings/gpio/gpio.h>
15 #include <dt-bindings/input/input.h>
18 model = "Renesas R-Car Gen3 ULCB board";
37 stdout-path = "serial0:115200n8";
40 audio_clkout: audio-clkout {
43 * but needed to avoid cs2000/rcar_sound probe dead-lock
45 compatible = "fixed-clock";
[all …]
/linux/drivers/net/phy/
H A Ddp83822.c1 // SPDX-License-Identifier: GPL-2.0
215 struct net_device *ndev = phydev->attached_dev; in dp83822_config_wol()
219 if (wol->wolopts & (WAKE_MAGIC | WAKE_MAGICSECURE)) { in dp83822_config_wol()
220 mac = (const u8 *)ndev->dev_addr; in dp83822_config_wol()
223 return -EINVAL; in dp83822_config_wol()
237 if (wol->wolopts & WAKE_MAGIC) in dp83822_config_wol()
242 if (wol->wolopts & WAKE_MAGICSECURE) { in dp83822_config_wol()
245 (wol->sopass[1] << 8) | wol->sopass[0]); in dp83822_config_wol()
248 (wol->sopass[3] << 8) | wol->sopass[2]); in dp83822_config_wol()
251 (wol->sopass[5] << 8) | wol->sopass[4]); in dp83822_config_wol()
[all …]
/linux/drivers/pinctrl/
H A Dpinctrl-xway.c1 // SPDX-License-Identifier: GPL-2.0-only
3 * linux/drivers/pinctrl/pinmux-xway.c
4 * based on linux/drivers/pinctrl/pinmux-pxa910.c
21 #include "pinctrl-lantiq.h"
110 /* --------- ase related code --------- */
117 MFP_XWAY(GPIO2, GPIO, STP, DFE, EPHY),
157 static const unsigned ase_pins_stp[] = {GPIO1, GPIO2, GPIO3};
159 static const unsigned ase_pins_ephy_led0[] = {GPIO2};
163 static const unsigned ase_pins_dfe_led1[] = {GPIO2};
238 /* --------- danube related code --------- */
[all …]
/linux/sound/soc/codecs/
H A Dcs35l41.c1 // SPDX-License-Identifier: GPL-2.0
3 // cs35l41.c -- CS35l41 ALSA SoC audio driver
5 // Copyright 2017-2021 Cirrus Logic, Inc.
23 #include <sound/soc-dapm.h>
165 return -EINVAL; in cs35l41_get_fs_mon_config_index()
170 1, 913, TLV_DB_MINMAX_ITEM(-10200, 1200));
187 struct snd_soc_component *component = snd_soc_dapm_to_component(w->dap in cs35l41_dsp_preload_ev()
1014 struct cs35l41_gpio_cfg *gpio2 = &hw_cfg->gpio2; cs35l41_handle_pdata() local
[all...]

123