/linux/arch/arm64/boot/dts/qcom/ |
H A D | sdm660-xiaomi-lavender.dts | 1 // SPDX-License-Identifier: GPL-2.0-only 7 /dts-v1/; 12 #include <dt-bindings/input/input.h> 13 #include <dt-bindings/input/gpio-keys.h> 18 chassis-type = "handset"; 25 #address-cells = <2>; 26 #size-cells = <2>; 29 stdout-path = "serial0:115200n8"; 32 compatible = "simple-framebuffer"; 41 vph_pwr: vph-pwr-regulator { [all …]
|
H A D | sdm630-sony-xperia-nile.dtsi | 1 // SPDX-License-Identifier: BSD-3-Clause 10 #include <dt-bindings/gpio/gpio.h> 11 #include <dt-bindings/input/input.h> 12 #include <dt-bindings/input/gpio-keys.h> 13 #include <dt-bindings/leds/common.h> 17 qcom,msm-id = <318 0>; 18 qcom,board-id = <8 1>; 19 qcom,pmic-id = <0x1001b 0x101011a 0x00 0x00 0x1001b 0x201011a 0x00 0x00>; 21 /* This part enables graphical output via bootloader-enabled display */ 25 #address-cells = <2>; [all …]
|
H A D | msm8992-lg-h815.dts | 1 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 8 /dts-v1/; 13 #include <dt-bindings/leds/common.h> 16 /delete-node/ &cont_splash_mem; 19 /delete-node/ &dfps_data_mem; 24 chassis-type = "handset"; 26 qcom,msm-id = <0xfb 0x0>; 27 qcom,pmic-id = <0x10009 0x1000a 0x0 0x0>; 28 qcom,board-id = <0xb64 0x0>; 31 /delete-node/ psci; [all …]
|
H A D | sa8295p-adp.dts | 1 // SPDX-License-Identifier: BSD-3-Clause 7 /dts-v1/; 9 #include <dt-bindings/gpio/gpio.h> 10 #include <dt-bindings/regulator/qcom,rpmh-regulator.h> 11 #include <dt-bindings/spmi/spmi.h> 12 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> 15 #include "sa8540p-pmics.dtsi" 19 compatible = "qcom,sa8295p-adp", "qcom,sa8540p"; 26 stdout-path = "serial0:115200n8"; 29 dp2-connector { [all …]
|
/linux/arch/arm/boot/dts/nvidia/ |
H A D | tegra124-venice2.dts | 1 // SPDX-License-Identifier: GPL-2.0 2 /dts-v1/; 4 #include <dt-bindings/input/input.h> 18 stdout-path = "serial0:115200n8"; 29 vdd-supply = <&vdd_3v3_hdmi>; 30 pll-supply = <&vdd_hdmi_pll>; 31 hdmi-supply = <&vdd_5v0_hdmi>; 33 nvidia,ddc-i2c-bus = <&hdmi_ddc>; 34 nvidia,hpd-gpio = 41 avdd-io-hdmi-dp-supply = <&vdd_1v05_run>; [all …]
|
H A D | tegra114-dalmore.dts | 1 // SPDX-License-Identifier: GPL-2.0 7 /dts-v1/; 9 #include <dt-bindings/input/input.h> 23 stdout-path = "serial0:115200n8"; 34 hdmi-supply = <&vdd_5v0_hdmi>; 35 vdd-supply = <&vdd_hdmi_reg>; 36 pll-supply = <&palmas_smps3_reg>; 38 nvidia,ddc-i2c-bus = <&hdmi_ddc>; 39 nvidia,hpd-gpio = 46 avdd-dsi-csi-supply = <&avdd_1v2_reg>; [all …]
|
H A D | tegra124-jetson-tk1.dts | 1 // SPDX-License-Identifier: GPL-2.0 2 /dts-v1/; 4 #include <dt-bindings/input/input.h> 7 #include "tegra124-jetson-tk1-emc.dtsi" 11 compatible = "nvidia,jetson-tk1", "nvidia,tegra124"; 17 /* This order keeps the mapping DB9 connector <-> ttyS0 */ 24 stdout-path = "serial0:115200n8"; 34 avddio-pex-supply = <&vdd_1v05_run>; 35 dvddio-pex-supply = <&vdd_1v05_run>; 36 avdd-pex-pll-supply = <&vdd_1v05_run>; [all …]
|
H A D | tegra30-asus-transformer-common.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 3 #include <dt-bindings/input/gpio-keys.h> 4 #include <dt-bindings/input/input.h> 5 #include <dt-bindings/thermal/thermal.h> 8 #include "tegra30-cpu-opp.dtsi" 9 #include "tegra30-cpu-opp-microvolt.dtsi" 12 chassis-type = "convertible"; 31 * pre-existing /chosen node to be available to insert the 37 trusted-foundations { 38 compatible = "tlm,trusted-foundations"; [all …]
|
H A D | tegra124-apalis-v1.2.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 OR MIT 3 * Copyright 2016-2018 Toradex AG 7 #include "tegra124-apalis-emc.dtsi" 21 avddio-pex-supply = <®_1v05_vdd>; 22 avdd-pex-pll-supply = <®_1v05_vdd>; 23 avdd-pll-erefe-supply = <®_1v05_avdd>; 24 dvddio-pex-supply = <®_1v05_vdd>; 25 hvdd-pex-pll-e-supply = <®_module_3v3>; 26 hvdd-pex-supply = <®_module_3v3>; 27 vddio-pex-ctl-supply = <®_module_3v3>; [all …]
|
H A D | tegra124-apalis.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 OR X11 3 * Copyright 2016-2019 Toradex AG 7 #include "tegra124-apalis-emc.dtsi" 20 avddio-pex-supply = <®_1v05_vdd>; 21 avdd-pex-pll-supply = <®_1v05_vdd>; 22 avdd-pll-erefe-supply = <®_1v05_avdd>; 23 dvddio-pex-supply = <®_1v05_vdd>; 24 hvdd-pex-pll-e-supply = <®_module_3v3>; 25 hvdd-pex-supply = <®_module_3v3>; 26 vddio-pex-ctl-supply = <®_module_3v3>; [all …]
|
H A D | tegra30-lg-x3.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 3 #include <dt-bindings/input/gpio-keys.h> 4 #include <dt-bindings/input/input.h> 5 #include <dt-bindings/leds/common.h> 6 #include <dt-bindings/mfd/max77620.h> 7 #include <dt-bindings/thermal/thermal.h> 10 #include "tegra30-cpu-opp.dtsi" 11 #include "tegra30-cpu-opp-microvolt.dtsi" 14 chassis-type = "handset"; 30 * pre-existing /chosen node to be available to insert the [all …]
|
H A D | tegra114-asus-tf701t.dts | 1 // SPDX-License-Identifier: GPL-2.0 3 /dts-v1/; 5 #include <dt-bindings/input/gpio-keys.h> 6 #include <dt-bindings/input/input.h> 13 chassis-type = "convertible"; 29 trusted-foundations { 30 compatible = "tlm,trusted-foundations"; 31 tlm,version-major = <2>; 32 tlm,version-minor = <8>; 40 reserved-memory { [all …]
|
H A D | tegra30-cardhu.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 2 #include <dt-bindings/input/input.h> 3 #include <dt-bindings/thermal/thermal.h> 5 #include "tegra30-cpu-opp.dtsi" 6 #include "tegra30-cpu-opp-microvolt.dtsi" 16 * use tegra30-cardhu-a02.dts, Cardhu fab version A04 and later, use 17 * tegra30-cardhu-a04.dts. 20 * The sticker will have number like 600-81291-1000-002 C.3. In this 4th 22 * The (downstream internal) U-Boot of Cardhu display the board-id as 43 stdout-path = "serial0:115200n8"; [all …]
|
/linux/Documentation/devicetree/bindings/iio/frequency/ |
H A D | adi,admv1014.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Antoniu Miclaus <antoniu.miclaus@analog.com> 21 - adi,admv1014 26 spi-max-frequency: 32 clock-names: 34 - const: lo_in 38 vcm-supply: 40 Common-mode voltage regulator. [all …]
|
H A D | adi,admv1013.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Antoniu Miclaus <antoniu.miclaus@analog.com> 21 - adi,admv1013 26 spi-max-frequency: 34 clock-names: 36 - const: lo_in 38 vcm-supply: 42 vcc-drv-supply: [all …]
|
/linux/Documentation/devicetree/bindings/mfd/ |
H A D | as3722.txt | 4 ------------------- 5 - compatible: Must be "ams,as3722". 6 - reg: I2C device address. 7 - interrupt-controller: AS3722 has internal interrupt controller which takes the 8 interrupt request from internal sub-blocks like RTC, regulators, GPIOs as well 10 - #interrupt-cells: Should be set to 2 for IRQ number and flags. 12 of AS3722 are defined at dt-bindings/mfd/as3722.h 14 interrupts.txt, using dt-bindings/irq. 17 -------------------- 18 - ams,enable-internal-int-pullup: Boolean property, to enable internal pullup on [all …]
|
/linux/Documentation/devicetree/bindings/iio/adc/ |
H A D | adi,ad7192.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 4 --- 6 $schema: http://devicetree.org/meta-schemas/core.yaml# 11 - Michae [all...] |
/linux/arch/arm64/boot/dts/nvidia/ |
H A D | tegra132-norrin.dts | 1 // SPDX-License-Identifier: GPL-2.0 2 /dts-v1/; 4 #include <dt-bindings/input/input.h> 18 stdout-path = "serial0:115200n8"; 30 vdd-supply = <&vdd_3v3_hdmi>; 31 pll-supply = <&vdd_hdmi_pll>; 32 hdmi-supply = <&vdd_5v0_hdmi>; 34 nvidia,ddc-i2c-bus = <&hdmi_ddc>; 35 nvidia,hpd-gpio = 42 avdd-io-hdmi-dp-supply = <&vdd_3v3_hdmi>; [all …]
|
/linux/Documentation/devicetree/bindings/regulator/ |
H A D | qcom,qca6390-pmu.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/regulator/qcom,qca6390-pmu.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Bartosz Golaszewski <bartosz.golaszewski@linaro.org> 20 - qcom,qca6390-pmu 21 - qcom,wcn6750-pmu 22 - qcom,wcn6855-pmu 23 - qcom,wcn7850-pmu 25 vdd-supply: [all …]
|
H A D | mediatek,mt6358-regulator.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/regulator/mediatek,mt6358-regulator.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Zhiyong Tao <zhiyong.tao@mediatek.com> 14 All voltage regulators provided by the PMIC are described as sub-nodes of 20 - const: mediatek,mt6358-regulator 21 - items: 22 - const: mediatek,mt6366-regulator 23 - const: mediatek,mt6358-regulator [all …]
|
/linux/Documentation/devicetree/bindings/leds/backlight/ |
H A D | kinetic,ktz8866.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Jianhua Lu <lujianhua000@gmail.com> 13 The Kinetic Technologies KTZ8866 is a high efficiency 6-channels-current-sinks 15 https://www.kinet-ic.com/ktz8866/ 18 - $ref: common.yaml# 27 vddpos-supply: 28 description: positive boost supply regulator. 30 vddneg-supply: [all …]
|
/linux/arch/arm64/boot/dts/rockchip/ |
H A D | rk3568-radxa-e25.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 3 /dts-v1/; 4 #include "rk3568-radxa-cm3i.dtsi" 14 pwm-leds { 15 compatible = "pwm-leds-multicolor"; 17 multi-led { 20 max-brightness = <255>; 22 led-red { 27 led-green { 32 led-blue { [all …]
|
/linux/Documentation/devicetree/bindings/display/panel/ |
H A D | jdi,lt070me05000.yaml | 1 # SPDX-License-Identifier: GPL-2.0 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Vinay Simha BN <simhavcs@gmail.com> 13 - $ref: panel-common.yaml# 22 enable-gpios: true 23 reset-gpios: true 25 vddp-supply: 27 The regulator that provides the supply voltage Power IC supply (3-5V) 29 iovcc-supply: [all …]
|
H A D | boe,tv101wum-nl6.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/display/panel/boe,tv101wum-nl6.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: BOE TV101WUM-NL6 DSI Display Panel 10 - Thierry Reding <thierry.reding@gmail.com> 11 - Sam Ravnborg <sam@ravnborg.org> 14 - $ref: panel-common.yaml# 19 # BOE TV101WUM-NL6 10.1" WUXGA TFT LCD panel 20 - boe,tv101wum-nl6 [all …]
|
H A D | himax,hx83102.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: Himax HX83102 MIPI-DSI LCD panel controller 10 - Cong Yang <yangcong5@huaqin.corp-partner.google.com> 13 - $ref: panel-common.yaml# 18 - enum: 19 # Boe nv110wum-l60 11.0" WUXGA TFT LCD panel 20 - boe,nv110wum-l60 22 - ivo,t109nw41 [all …]
|