| /linux/Documentation/devicetree/bindings/usb/ | 
| H A D | maxim,max3421.txt | 1 Maxim Integrated SPI-based USB 2.0 host controller MAX3421E4  - compatible: Should be "maxim,max3421"
 5  - spi-max-frequency: maximum frequency for this device must not exceed 26 MHz.
 6  - reg: chip select number to which this device is connected.
 7  - maxim,vbus-en-pin: <GPOUTx ACTIVE_LEVEL>
 8    GPOUTx is the number (1-8) of the GPOUT pin of MAX3421E to drive Vbus.
 10  - interrupts: the interrupt line description for the interrupt controller.
 19 		maxim,vbus-en-pin = <3 1>;
 20 		spi-max-frequency = <26000000>;
 21 		interrupt-parent = <&PIC>;
 
 | 
| /linux/Documentation/devicetree/bindings/mfd/ | 
| H A D | x-powers,axp152.yaml | 1 # SPDX-License-Identifier: GPL-2.03 ---
 4 $id: http://devicetree.org/schemas/mfd/x-powers,axp152.yaml#
 5 $schema: http://devicetree.org/meta-schemas/core.yaml#
 7 title: X-Powers AXP PMIC
 10   - Chen-Yu Tsai <wens@csie.org>
 13   - if:
 18               - x-powers,axp152
 19               - x-powers,axp202
 20               - x-powers,axp209
 [all …]
 
 | 
| /linux/arch/arm64/boot/dts/mediatek/ | 
| H A D | mt8390-genio-common.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)4  * Author: Chris Chen <chris-qj.chen@mediatek.com>
 9  *                    Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
 14 #include <dt-bindings/gpio/gpio.h>
 15 #include <dt-bindings/input/input.h>
 16 #include <dt-bindings/interrupt-controller/irq.h>
 17 #include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
 18 #include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
 19 #include <dt-bindings/spmi/spmi.h>
 20 #include <dt-bindings/usb/pd.h>
 [all …]
 
 | 
| H A D | mt8395-genio-1200-evk.dts | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)7 /dts-v1/;
 11 #include <dt-bindings/gpio/gpio.h>
 12 #include <dt-bindings/input/input.h>
 13 #include <dt-bindings/interrupt-controller/irq.h>
 14 #include <dt-bindings/pinctrl/mt8195-pinfunc.h>
 15 #include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
 16 #include <dt-bindings/spmi/spmi.h>
 17 #include <dt-bindings/usb/pd.h>
 20 	model = "MediaTek Genio 1200 EVK-P1V2-EMMC";
 [all …]
 
 | 
| H A D | mt8192-asurada.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)6 /dts-v1/;
 9 #include <dt-bindings/gpio/gpio.h>
 10 #include <dt-bindings/spmi/spmi.h>
 25 		stdout-path = "serial0:115200n8";
 33 	backlight_lcd0: backlight-lcd0 {
 34 		compatible = "pwm-backlight";
 36 		power-supply = <&ppvar_sys>;
 37 		enable-gpios = <&pio 152 0>;
 38 		brightness-levels = <0 1023>;
 [all …]
 
 | 
| H A D | mt8186-corsola.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)5 /dts-v1/;
 7 #include <dt-bindings/pinctrl/mt8186-pinfunc.h>
 8 #include <dt-bindings/gpio/gpio.h>
 9 #include <dt-bindings/input/input.h>
 10 #include <dt-bindings/input/gpio-keys.h>
 11 #include <dt-bindings/regulator/mediatek,mt6397-regulator.h>
 26 		stdout-path = "serial0:115200n8";
 35 	backlight_lcd0: backlight-lcd0 {
 36 		compatible = "pwm-backlight";
 [all …]
 
 | 
| /linux/arch/arm64/boot/dts/allwinner/ | 
| H A D | sun50i-a64-olinuxino.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)4 /dts-v1/;
 6 #include "sun50i-a64.dtsi"
 7 #include "sun50i-a64-cpu-opp.dtsi"
 9 #include <dt-bindings/gpio/gpio.h>
 12 	model = "Olimex A64-Olinuxino";
 13 	compatible = "olimex,a64-olinuxino", "allwinner,sun50i-a64";
 21 		stdout-path = "serial0:115200n8";
 24 	hdmi-connector {
 25 		compatible = "hdmi-connector";
 [all …]
 
 | 
| H A D | sun50i-a100-allwinner-perf1.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)6 /dts-v1/;
 8 #include "sun50i-a100.dtsi"
 9 #include "sun50i-a100-cpu-opp.dtsi"
 11 #include <dt-bindings/gpio/gpio.h>
 15 	compatible = "allwinner,a100-perf1", "allwinner,sun50i-a100";
 22 		stdout-path = "serial0:115200n8";
 27 	vmmc-supply = <®_dcdc1>;
 28 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
 29 	bus-width = <4>;
 [all …]
 
 | 
| H A D | sun50i-a64-amarula-relic.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)5 /dts-v1/;
 7 #include "sun50i-a64.dtsi"
 8 #include "sun50i-a64-cpu-opp.dtsi"
 10 #include <dt-bindings/gpio/gpio.h>
 13 	model = "Amarula A64-Relic";
 14 	compatible = "amarula,a64-relic", "allwinner,sun50i-a64";
 21 		stdout-path = "serial0:115200n8";
 25 		compatible = "i2c-gpio";
 26 		sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>;
 [all …]
 
 | 
| H A D | sun50i-a64-orangepi-win.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)3 // Copyright (C) 2017-2018 Samuel Holland <samuel@sholland.org>
 5 /dts-v1/;
 7 #include "sun50i-a64.dtsi"
 8 #include "sun50i-a64-cpu-opp.dtsi"
 10 #include <dt-bindings/gpio/gpio.h>
 14 	compatible = "xunlong,orangepi-win", "allwinner,sun50i-a64";
 26 		stdout-path = "serial0:115200n8";
 29 	hdmi-connector {
 30 		compatible = "hdmi-connector";
 [all …]
 
 | 
| H A D | sun50i-h64-remix-mini-pc.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)4 /dts-v1/;
 6 #include "sun50i-a64.dtsi"
 7 #include "sun50i-a64-cpu-opp.dtsi"
 9 #include <dt-bindings/gpio/gpio.h>
 13 	compatible = "jide,remix-mini-pc", "allwinner,sun50i-h64",
 14 		     "allwinner,sun50i-a64";
 22 		stdout-path = "serial0:115200n8";
 25 	hdmi-connector {
 26 		compatible = "hdmi-connector";
 [all …]
 
 | 
| /linux/arch/arm/boot/dts/allwinner/ | 
| H A D | sun6i-reference-design-tablet.dtsi | 4  * This file is dual-licensed: you can use it either under the terms43 #include "sunxi-common-regulators.dtsi"
 45 #include <dt-bindings/gpio/gpio.h>
 46 #include <dt-bindings/input/input.h>
 54 		stdout-path = "serial0:115200n8";
 59 	cpu-supply = <®_dcdc3>;
 68 	pinctrl-names = "default";
 69 	pinctrl-0 = <&mmc0_pins>;
 70 	vmmc-supply = <®_dcdc1>;
 71 	bus-width = <4>;
 [all …]
 
 | 
| H A D | sun8i-a83t-cubietruck-plus.dts | 2  * Copyright 2015 Chen-Yu Tsai4  * Chen-Yu Tsai <wens@csie.org>
 6  * This file is dual-licensed: you can use it either under the terms
 45 /dts-v1/;
 46 #include "sun8i-a83t.dtsi"
 48 #include <dt-bindings/gpio/gpio.h>
 52 	compatible = "cubietech,cubietruck-plus", "allwinner,sun8i-a83t";
 60 		stdout-path = "serial0:115200n8";
 63 	hdmi-connector {
 64 		compatible = "hdmi-connector";
 [all …]
 
 | 
| H A D | sun8i-a83t-bananapi-m3.dts | 2  * Copyright 2017 Chen-Yu Tsai4  * Chen-Yu Tsai <wens@csie.org>
 6  * This file is dual-licensed: you can use it either under the terms
 45 /dts-v1/;
 46 #include "sun8i-a83t.dtsi"
 48 #include <dt-bindings/gpio/gpio.h>
 51 	model = "Banana Pi BPI-M3";
 52 	compatible = "sinovoip,bpi-m3", "allwinner,sun8i-a83t";
 60 		stdout-path = "serial0:115200n8";
 64 		compatible = "hdmi-connector";
 [all …]
 
 | 
| H A D | sun8i-r16-parrot.dts | 4  * Quentin Schulz <quentin.schulz@free-electrons.com>6  * This file is dual-licensed: you can use it either under the terms
 45 /dts-v1/;
 46 #include "sun8i-a33.dtsi"
 47 #include "sunxi-common-regulators.dtsi"
 49 #include <dt-bindings/gpio/gpio.h>
 50 #include <dt-bindings/input/input.h>
 54 	compatible = "allwinner,parrot", "allwinner,sun8i-a33";
 61 		stdout-path = "serial0:115200n8";
 65 		compatible = "gpio-leds";
 [all …]
 
 | 
| H A D | sun8i-a33-olinuxino.dts | 2  * Copyright 2016 - Stefan Mavrodiev <stefan.mavrodiev@gmail.com>5  * This file is dual-licensed: you can use it either under the terms
 44 /dts-v1/;
 45 #include "sun8i-a33.dtsi"
 47 #include <dt-bindings/gpio/gpio.h>
 48 #include <dt-bindings/input/input.h>
 51 	model = "Olimex A33-OLinuXino";
 52 	compatible = "olimex,a33-olinuxino","allwinner,sun8i-a33";
 59 		stdout-path = "serial0:115200n8";
 63 		compatible = "gpio-leds";
 [all …]
 
 | 
| H A D | sun8i-reference-design-tablet.dtsi | 4  * This file is dual-licensed: you can use it either under the terms42 #include "sunxi-reference-design-tablet.dtsi"
 44 #include <dt-bindings/pwm/pwm.h>
 52 		compatible = "pwm-backlight";
 54 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 55 		default-brightness-level = <8>;
 56 		enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
 57 		power-supply = <®_dc1sw>;
 61 		stdout-path = "serial0:115200n8";
 71 	clock-frequency = <400000>;
 [all …]
 
 | 
| H A D | sun9i-a80-optimus.dts | 2  * Copyright 2014 Chen-Yu Tsai4  * Chen-Yu Tsai <wens@csie.org>
 6  * This file is dual-licensed: you can use it either under the terms
 45 /dts-v1/;
 46 #include "sun9i-a80.dtsi"
 48 #include <dt-bindings/gpio/gpio.h>
 52 	compatible = "merrii,a80-optimus", "allwinner,sun9i-a80";
 60 		stdout-path = "serial0:115200n8";
 64 		compatible = "gpio-leds";
 83 	reg_usb1_vbus: usb1-vbus {
 [all …]
 
 | 
| H A D | sun6i-a31s-primo81.dts | 4  * Copyright 2015 Chen-Yu Tsai <wens@csie.org>6  * This file is dual-licensed: you can use it either under the terms
 45 /dts-v1/;
 46 #include "sun6i-a31s.dtsi"
 47 #include "sunxi-common-regulators.dtsi"
 49 #include <dt-bindings/gpio/gpio.h>
 50 #include <dt-bindings/input/input.h>
 54 	compatible = "msi,primo81", "allwinner,sun6i-a31s";
 56 	hdmi-connector {
 57 		compatible = "hdmi-connector";
 [all …]
 
 | 
| H A D | sun8i-r16-bananapi-m2m.dts | 2  * Copyright (c) 2017 Free Electrons <maxime.ripard@free-electrons.com>4  * This file is dual-licensed: you can use it either under the terms
 43 /dts-v1/;
 44 #include "sun8i-a33.dtsi"
 46 #include <dt-bindings/gpio/gpio.h>
 50 	compatible = "sinovoip,bananapi-m2m", "allwinner,sun8i-a33";
 61 		stdout-path = "serial0:115200n8";
 65 		compatible = "gpio-leds";
 67 		led-0 {
 68 			label = "bpi-m2m:blue:usr";
 [all …]
 
 | 
| /linux/arch/arm64/boot/dts/qcom/ | 
| H A D | msm8998-sony-xperia-yoshino.dtsi | 1 // SPDX-License-Identifier: BSD-3-Clause8 #include <dt-bindings/input/input.h>
 9 #include <dt-bindings/leds/common.h>
 10 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 18 	qcom,msm-id = <0x124 0x20000>, <0x124 0x20001>; /* 8998v2, v2.1 */
 19 	qcom,board-id = <8 0>;
 23 			compatible = "gpio-gate-clock";
 24 			pinctrl-0 = <&div_clk1>;
 25 			pinctrl-names = "default";
 27 			#clock-cells = <0>;
 [all …]
 
 | 
| /linux/arch/arm/boot/dts/samsung/ | 
| H A D | exynos5420-peach-pit.dts | 1 // SPDX-License-Identifier: GPL-2.08 /dts-v1/;
 9 #include <dt-bindings/input/input.h>
 10 #include <dt-bindings/gpio/gpio.h>
 11 #include <dt-bindings/interrupt-controller/irq.h>
 12 #include <dt-bindings/clock/maxim,max77802.h>
 13 #include <dt-bindings/regulator/maxim,max77802.h>
 14 #include <dt-bindings/sound/samsung-i2s.h>
 16 #include "exynos5420-cpus.dtsi"
 21 	compatible = "google,pit-rev16",
 [all …]
 
 | 
| H A D | exynos5800-peach-pi.dts | 1 // SPDX-License-Identifier: GPL-2.08 /dts-v1/;
 9 #include <dt-bindings/input/input.h>
 10 #include <dt-bindings/gpio/gpio.h>
 11 #include <dt-bindings/interrupt-controller/irq.h>
 12 #include <dt-bindings/clock/maxim,max77802.h>
 13 #include <dt-bindings/regulator/maxim,max77802.h>
 14 #include <dt-bindings/sound/samsung-i2s.h>
 16 #include "exynos5420-cpus.dtsi"
 21 	compatible = "google,pi-rev16",
 [all …]
 
 | 
| /linux/arch/arm64/boot/dts/rockchip/ | 
| H A D | rk3566-bigtreetech-cb2.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)3 /dts-v1/;
 5 #include <dt-bindings/gpio/gpio.h>
 6 #include <dt-bindings/pwm/pwm.h>
 7 #include <dt-bindings/pinctrl/rockchip.h>
 8 #include <dt-bindings/soc/rockchip,vop2.h>
 9 #include <dt-bindings/leds/common.h>
 20 		stdout-path = "serial2:1500000n8";
 23 	ext_cam_clk: clock-25000000-cam {
 24 		compatible = "fixed-clock";
 [all …]
 
 | 
| /linux/arch/arm/boot/dts/qcom/ | 
| H A D | qcom-msm8974pro-sony-xperia-shinano-common.dtsi | 1 // SPDX-License-Identifier: GPL-2.02 #include "qcom-msm8974pro.dtsi"
 5 #include <dt-bindings/input/input.h>
 6 #include <dt-bindings/leds/common.h>
 7 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 18 		stdout-path = "serial0:115200n8";
 21 	gpio-keys {
 22 		compatible = "gpio-keys";
 24 		pinctrl-0 = <&gpio_keys_pin_a>;
 25 		pinctrl-names = "default";
 [all …]
 
 |