/linux/Documentation/devicetree/bindings/memory-controllers/ |
H A D | ti,gpmc-child.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/memory-controllers/ti,gpmc-child.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Tony Lindgren <tony@atomide.com> 11 - Roger Quadros <rogerq@kernel.org> 24 gpmc,sync-clk-ps: 28 # Chip-select signal timings corresponding to GPMC_CONFIG2: 29 gpmc,cs-on-ns: 33 gpmc,cs-rd-off-ns: [all …]
|
/linux/arch/arm/boot/dts/ti/omap/ |
H A D | omap-gpmc-smsc911x.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 10 vddvario: regulator-vddvario { 11 compatible = "regulator-fixed"; 12 regulator-name = "vddvario"; 13 regulator-always-on; 16 vdd33a: regulator-vdd33a { 17 compatible = "regulator-fixed"; 18 regulator-name = "vdd33a"; 19 regulator-always-on; 26 bank-width = <2>; [all …]
|
H A D | omap-gpmc-smsc9221.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 14 vddvario: regulator-vddvario { 15 compatible = "regulator-fixed"; 16 regulator-name = "vddvario"; 17 regulator-always-on; 20 vdd33a: regulator-vdd33a { 21 compatible = "regulator-fixed"; 22 regulator-name = "vdd33a"; 23 regulator-always-on; 30 bank-width = <2>; [all …]
|
H A D | omap3-overo-tobiduo-common.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 10 #include "omap3-overo-common-peripherals.dtsi" 12 #include "omap-gpmc-smsc9221.dtsi" 17 interrupt-parent = <&gpio6>; 23 bank-width = <2>; 25 gpmc,mux-add-data = <0>; 26 gpmc,cs-on-ns = <0>; 27 gpmc,cs-rd-off-ns = <42>; 28 gpmc,cs-wr-off-ns = <36>; 29 gpmc,adv-on-ns = <6>; [all …]
|
H A D | omap2430-sdp.dts | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ 5 /dts-v1/; 11 compatible = "ti,omap2430-sdp", "ti,omap2430", "ti,omap2"; 20 clock-frequency = <100000>; 31 vmmc-supply = <&vmmc1>; 32 bus-width = <4>; 39 interrupt-parent = <&gpio5>; 42 bank-width = <2>; 43 gpmc,sync-clk-ps = <0>; [all …]
|
H A D | omap3-devkit8000-common.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 6 #include <dt-bindings/input/input.h> 16 compatible = "gpio-leds"; 18 led-heartbeat { 20 gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>; /* 186 -> LED1 */ 21 default-state = "on"; 22 linux,default-trigger = "heartbeat"; 25 led-mmc { 27 gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 -> LED2 */ 28 default-state = "on"; [all …]
|
H A D | omap-zoom-common.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 6 #include "omap-gpmc-smsc911x.dtsi" 20 bank-width = <2>; 21 reg-shift = <1>; 22 reg-io-width = <1>; 23 interrupt-parent = <&gpio4>; 25 clock-frequency = <1843200>; 26 current-speed = <115200>; 27 gpmc,mux-add-data = <0>; 28 gpmc,device-width = <1>; [all …]
|
H A D | omap2420-h4.dts | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ 5 /dts-v1/; 11 compatible = "ti,omap2420-h4", "ti,omap2420", "ti,omap2"; 23 compatible = "cfi-flash"; 24 linux,mtd-name = "intel,ge28f256l18b85"; 25 #address-cells = <1>; 26 #size-cells = <1>; 28 bank-width = <2>; 30 gpmc,mux-add-data = <2>; [all …]
|
H A D | omap3-gta04a5one.dts | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * Copyright (C) 2014-18 H. Nikolaus Schaller <hns@goldelico.com> 6 #include "omap3-gta04a5.dts" 13 gpmc_pins: gpmc-pins { 14 pinctrl-single,pins = < 45 pinctrl-names = "default"; 46 pinctrl-0 = <&gpmc_pins>; 48 /delete-node/ nand@0,0; 52 #address-cells = <1>; 53 #size-cells = <1>; [all …]
|
H A D | am335x-nano.dts | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * Copyright (C) 2013 Newflow Ltd - https://www.newflow.co.uk/ 5 /dts-v1/; 15 cpu0-supply = <&dcdc2_reg>; 25 compatible = "gpio-leds"; 30 default-state = "off"; 36 pinctrl-names = "default"; 37 pinctrl-0 = <&misc_pins>; 39 misc_pins: misc-pins { 40 pinctrl-single,pins = < [all …]
|
H A D | omap3-lilly-a83x.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-or-later 9 model = "INCOstartec LILLY-A83X module (DM3730)"; 10 compatible = "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap36xx", "ti,omap3"; 22 compatible = "gpio-leds"; 25 label = "lilly-a83x::led1"; 27 linux,default-trigger = "default-on"; 33 compatible = "ti,omap-twl4030"; 34 ti,model = "lilly-a83x"; 40 compatible = "regulator-fixed"; 41 regulator-name = "VCC3"; [all …]
|
H A D | omap4-duovero-parlor.dts | 1 // SPDX-License-Identifier: GPL-2.0-only 5 /dts-v1/; 7 #include "omap4-duovero.dtsi" 9 #include <dt-bindings/input/input.h> 13 compatible = "gumstix,omap4-duovero-parlor", "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4"; 20 compatible = "gpio-leds"; 24 linux,default-trigger = "heartbeat"; 29 compatible = "gpio-keys"; 30 #address-cells = <1>; 31 #size-cells = <0>; [all …]
|
H A D | am335x-chilisom.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * Copyright (C) 2015 Jablotron s.r.o. -- https://www.jablotron.com/ 7 #include <dt-bindings/interrupt-controller/irq.h> 11 compatible = "grinn,am335x-chilisom", "ti,am33xx"; 15 cpu0-supply = <&dcdc2_reg>; 26 pinctrl-names = "default"; 28 i2c0_pins: i2c0-pins { 29 pinctrl-single,pins = < 35 nandflash_pins: nandflash-pins { 36 pinctrl-single,pins = < [all …]
|
H A D | omap2420-n8x0-common.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 11 stdout-path = &uart3; 16 compatible = "i2c-cbus-gpio"; 21 #address-cells = <1>; 22 #size-cells = <0>; 25 interrupt-parent = <&gpio4>; 34 clock-frequency = <400000>; 44 clock-frequency = <400000>; 50 /* gpio-irq for dma: 26 */ 53 #address-cells = <1>; [all …]
|
H A D | omap3-lilly-dbb056.dts | 1 // SPDX-License-Identifier: GPL-2.0-or-later 5 /dts-v1/; 7 #include "omap3-lilly-a83x.dtsi" 10 model = "INCOstartec LILLY-DBB056 (DM3730)"; 11 …compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,… 15 vaux2: regulator-vaux2 { 16 compatible = "ti,twl4030-vaux2"; 17 regulator-min-microvolt = <2800000>; 18 regulator-max-microvolt = <2800000>; 19 regulator-always-on; [all …]
|
H A D | am335x-igep0033.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * am335x-igep0033.dtsi - Device Tree file for IGEP COM AQUILA AM335x 5 * Copyright (C) 2013 ISEE 2007 SL - https://www.isee.biz 8 /dts-v1/; 11 #include <dt-bindings/interrupt-controller/irq.h> 16 cpu0-supply = <&vdd1_reg>; 26 pinctrl-names = "default"; 27 pinctrl-0 = <&leds_pins>; 29 compatible = "gpio-leds"; 34 default-state = "on"; [all …]
|
H A D | am335x-myirtech-myc.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* SPDX-FileCopyrightText: Alexander Shiyan, <shc_work@mail.ru> */ 5 /* Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */ 7 /dts-v1/; 11 #include <dt-bindings/interrupt-controller/irq.h> 12 #include <dt-bindings/leds/common.h> 15 model = "MYIR MYC-AM335X"; 16 compatible = "myir,myc-am335x", "ti,am33xx"; 20 cpu0-supply = <&vdd_core>; 21 voltage-tolerance = <2>; [all …]
|
H A D | am335x-phycore-som.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 8 #include <dt-bindings/interrupt-controller/irq.h> 12 compatible = "phytec,am335x-phycore-som", "ti,am33xx"; 22 cpu0-supply = <&vdd1_reg>; 32 compatible = "regulator-fixed"; 33 regulator-name = "vcc5v"; 34 regulator-min-microvolt = <5000000>; 35 regulator-max-microvolt = <5000000>; 36 regulator-boot-on; 37 regulator-always-on; [all …]
|
H A D | omap3-tao3530.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ 6 /dts-v1/; 26 cpu0-supply = <&vcc>; 37 compatible = "regulator-fixed"; 38 regulator-name = "hsusb2_vbus"; 39 regulator-min-microvolt = <3300000>; 40 regulator-max-microvolt = <3300000>; 42 startup-delay-us = <70000>; 46 hsusb2_phy: hsusb2-phy-pins { [all …]
|
H A D | logicpd-torpedo-baseboard.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 5 compatible = "gpio-keys"; 6 pinctrl-names = "default"; 7 pinctrl-0 = <&gpio_key_pins &gpio_key_pins_wkup>; 13 wakeup-source; 20 wakeup-source; 27 wakeup-source; 34 wakeup-source; 39 compatible = "ti,omap-twl4030"; 45 compatible = "gpio-leds"; [all …]
|
H A D | am335x-cm-t335.dts | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * am335x-cm-t335.dts - Device Tree file for Compulab CM-T335 5 * Copyright (C) 2014 - 2015 CompuLab Ltd. - https://www.compulab.co.il/ 8 /dts-v1/; 11 #include <dt-bindings/interrupt-controller/irq.h> 14 model = "CompuLab CM-T335"; 15 compatible = "compulab,cm-t335", "ti,am33xx"; 23 compatible = "gpio-leds"; 24 pinctrl-names = "default"; 25 pinctrl-0 = <&gpio_led_pins>; [all …]
|
H A D | omap3-beagle.dts | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ 5 /dts-v1/; 11 compatible = "ti,omap3-beagle", "ti,omap3430", "ti,omap3"; 15 cpu0-supply = <&vcc>; 30 compatible = "gpio-leds"; 31 led-pmu-stat { 36 led-heartbeat { 38 gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */ 39 linux,default-trigger = "heartbeat"; [all …]
|
/linux/arch/arm64/boot/dts/ti/ |
H A D | k3-am62-lp-sk-nand.dtso | 1 // SPDX-License-Identifier: GPL-2.0 3 * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/ 6 /dts-v1/; 8 #include <dt-bindings/gpio/gpio.h> 9 #include <dt-bindings/interrupt-controller/irq.h> 10 #include "k3-pinctrl.h" 17 gpmc0_pins_default: gpmc0-pins-default { 18 pinctrl-single,pins = < 44 pinctrl-names = "default"; 45 pinctrl-0 = <&gpmc0_pins_default>; [all …]
|
H A D | k3-am642-evm-nand.dtso | 1 // SPDX-License-Identifier: GPL-2.0-only OR MIT 5 * Copyright (C) 2021-2024 Texas Instruments Incorporated - https://www.ti.com/ 8 /dts-v1/; 10 #include <dt-bindings/gpio/gpio.h> 11 #include <dt-bindings/interrupt-controller/irq.h> 12 #include "k3-pinctrl.h" 15 gpmc0_default_pins: gpmc0-default-pins { 16 bootph-all; 17 pinctrl-single,pins = < 53 gpmc0-hog { [all …]
|
/linux/drivers/memory/ |
H A D | omap-gpmc.c | 1 // SPDX-License-Identifier: GPL-2.0-only 5 * Copyright (C) 2005-2006 Nokia Corporation 10 * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> 33 #include <linux/omap-gpmc.h> 37 #include <linux/platform_data/mtd-nand-omap2.h> 39 #define DEVICE_NAME "omap-gpmc" 207 /* Structure to save gpmc cs context */ 221 * to support core off on OMAP3 258 /* Define chip-selects as reserved by default until probe completes */ 278 void gpmc_cs_write_reg(int cs, int idx, u32 val) in gpmc_cs_write_reg() argument [all …]
|