1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/cpu/idle-states.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Idle states 8 9maintainers: 10 - Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> 11 - Anup Patel <anup@brainfault.org> 12 13description: |+ 14 ========================================== 15 1 - Introduction 16 ========================================== 17 18 ARM and RISC-V systems contain HW capable of managing power consumption 19 dynamically, where cores can be put in different low-power states (ranging 20 from simple wfi to power gating) according to OS PM policies. The CPU states 21 representing the range of dynamic idle states that a processor can enter at 22 run-time, can be specified through device tree bindings representing the 23 parameters required to enter/exit specific idle states on a given processor. 24 25 ========================================== 26 2 - ARM idle states 27 ========================================== 28 29 According to the Server Base System Architecture document (SBSA, [3]), the 30 power states an ARM CPU can be put into are identified by the following list: 31 32 - Running 33 - Idle_standby 34 - Idle_retention 35 - Sleep 36 - Off 37 38 The power states described in the SBSA document define the basic CPU states on 39 top of which ARM platforms implement power management schemes that allow an OS 40 PM implementation to put the processor in different idle states (which include 41 states listed above; "off" state is not an idle state since it does not have 42 wake-up capabilities, hence it is not considered in this document). 43 44 Idle state parameters (e.g. entry latency) are platform specific and need to 45 be characterized with bindings that provide the required information to OS PM 46 code so that it can build the required tables and use them at runtime. 47 48 The device tree binding definition for ARM idle states is the subject of this 49 document. 50 51 ========================================== 52 3 - RISC-V idle states 53 ========================================== 54 55 On RISC-V systems, the HARTs (or CPUs) [6] can be put in platform specific 56 suspend (or idle) states (ranging from simple WFI, power gating, etc). The 57 RISC-V SBI v0.3 (or higher) [7] hart state management extension provides a 58 standard mechanism for OS to request HART state transitions. 59 60 The platform specific suspend (or idle) states of a hart can be either 61 retentive or non-rententive in nature. A retentive suspend state will 62 preserve HART registers and CSR values for all privilege modes whereas 63 a non-retentive suspend state will not preserve HART registers and CSR 64 values. 65 66 =========================================== 67 4 - idle-states definitions 68 =========================================== 69 70 Idle states are characterized for a specific system through a set of 71 timing and energy related properties, that underline the HW behaviour 72 triggered upon idle states entry and exit. 73 74 The following diagram depicts the CPU execution phases and related timing 75 properties required to enter and exit an idle state: 76 77 ..__[EXEC]__|__[PREP]__|__[ENTRY]__|__[IDLE]__|__[EXIT]__|__[EXEC]__.. 78 | | | | | 79 80 |<------ entry ------->| 81 | latency | 82 |<- exit ->| 83 | latency | 84 |<-------- min-residency -------->| 85 |<------- wakeup-latency ------->| 86 87 Diagram 1: CPU idle state execution phases 88 89 EXEC: Normal CPU execution. 90 91 PREP: Preparation phase before committing the hardware to idle mode 92 like cache flushing. This is abortable on pending wake-up 93 event conditions. The abort latency is assumed to be negligible 94 (i.e. less than the ENTRY + EXIT duration). If aborted, CPU 95 goes back to EXEC. This phase is optional. If not abortable, 96 this should be included in the ENTRY phase instead. 97 98 ENTRY: The hardware is committed to idle mode. This period must run 99 to completion up to IDLE before anything else can happen. 100 101 IDLE: This is the actual energy-saving idle period. This may last 102 between 0 and infinite time, until a wake-up event occurs. 103 104 EXIT: Period during which the CPU is brought back to operational 105 mode (EXEC). 106 107 entry-latency: Worst case latency required to enter the idle state. The 108 exit-latency may be guaranteed only after entry-latency has passed. 109 110 min-residency: Minimum period, including preparation and entry, for a given 111 idle state to be worthwhile energywise. 112 113 wakeup-latency: Maximum delay between the signaling of a wake-up event and the 114 CPU being able to execute normal code again. If not specified, this is assumed 115 to be entry-latency + exit-latency. 116 117 These timing parameters can be used by an OS in different circumstances. 118 119 An idle CPU requires the expected min-residency time to select the most 120 appropriate idle state based on the expected expiry time of the next IRQ 121 (i.e. wake-up) that causes the CPU to return to the EXEC phase. 122 123 An operating system scheduler may need to compute the shortest wake-up delay 124 for CPUs in the system by detecting how long will it take to get a CPU out 125 of an idle state, e.g.: 126 127 wakeup-delay = exit-latency + max(entry-latency - (now - entry-timestamp), 0) 128 129 In other words, the scheduler can make its scheduling decision by selecting 130 (e.g. waking-up) the CPU with the shortest wake-up delay. 131 The wake-up delay must take into account the entry latency if that period 132 has not expired. The abortable nature of the PREP period can be ignored 133 if it cannot be relied upon (e.g. the PREP deadline may occur much sooner than 134 the worst case since it depends on the CPU operating conditions, i.e. caches 135 state). 136 137 An OS has to reliably probe the wakeup-latency since some devices can enforce 138 latency constraint guarantees to work properly, so the OS has to detect the 139 worst case wake-up latency it can incur if a CPU is allowed to enter an 140 idle state, and possibly to prevent that to guarantee reliable device 141 functioning. 142 143 The min-residency time parameter deserves further explanation since it is 144 expressed in time units but must factor in energy consumption coefficients. 145 146 The energy consumption of a cpu when it enters a power state can be roughly 147 characterised by the following graph: 148 149 | 150 | 151 | 152 e | 153 n | /--- 154 e | /------ 155 r | /------ 156 g | /----- 157 y | /------ 158 | ---- 159 | /| 160 | / | 161 | / | 162 | / | 163 | / | 164 | / | 165 |/ | 166 -----|-------+---------------------------------- 167 0| 1 time(ms) 168 169 Graph 1: Energy vs time example 170 171 The graph is split in two parts delimited by time 1ms on the X-axis. 172 The graph curve with X-axis values = { x | 0 < x < 1ms } has a steep slope 173 and denotes the energy costs incurred while entering and leaving the idle 174 state. 175 The graph curve in the area delimited by X-axis values = {x | x > 1ms } has 176 shallower slope and essentially represents the energy consumption of the idle 177 state. 178 179 min-residency is defined for a given idle state as the minimum expected 180 residency time for a state (inclusive of preparation and entry) after 181 which choosing that state become the most energy efficient option. A good 182 way to visualise this, is by taking the same graph above and comparing some 183 states energy consumptions plots. 184 185 For sake of simplicity, let's consider a system with two idle states IDLE1, 186 and IDLE2: 187 188 | 189 | 190 | 191 | /-- IDLE1 192 e | /--- 193 n | /---- 194 e | /--- 195 r | /-----/--------- IDLE2 196 g | /-------/--------- 197 y | ------------ /---| 198 | / /---- | 199 | / /--- | 200 | / /---- | 201 | / /--- | 202 | --- | 203 | / | 204 | / | 205 |/ | time 206 ---/----------------------------+------------------------ 207 |IDLE1-energy < IDLE2-energy | IDLE2-energy < IDLE1-energy 208 | 209 IDLE2-min-residency 210 211 Graph 2: idle states min-residency example 212 213 In graph 2 above, that takes into account idle states entry/exit energy 214 costs, it is clear that if the idle state residency time (i.e. time till next 215 wake-up IRQ) is less than IDLE2-min-residency, IDLE1 is the better idle state 216 choice energywise. 217 218 This is mainly down to the fact that IDLE1 entry/exit energy costs are lower 219 than IDLE2. 220 221 However, the lower power consumption (i.e. shallower energy curve slope) of 222 idle state IDLE2 implies that after a suitable time, IDLE2 becomes more energy 223 efficient. 224 225 The time at which IDLE2 becomes more energy efficient than IDLE1 (and other 226 shallower states in a system with multiple idle states) is defined 227 IDLE2-min-residency and corresponds to the time when energy consumption of 228 IDLE1 and IDLE2 states breaks even. 229 230 The definitions provided in this section underpin the idle states 231 properties specification that is the subject of the following sections. 232 233 =========================================== 234 5 - idle-states node 235 =========================================== 236 237 The processor idle states are defined within the idle-states node, which is 238 a direct child of the cpus node [1] and provides a container where the 239 processor idle states, defined as device tree nodes, are listed. 240 241 On ARM systems, it is a container of processor idle states nodes. If the 242 system does not provide CPU power management capabilities, or the processor 243 just supports idle_standby, an idle-states node is not required. 244 245 =========================================== 246 6 - Qualcomm specific STATES 247 =========================================== 248 249 Idle states have different enter/exit latency and residency values. 250 The idle states supported by the QCOM SoC are defined as - 251 252 * Standby 253 * Retention 254 * Standalone Power Collapse (Standalone PC or SPC) 255 * Power Collapse (PC) 256 257 Standby: Standby does a little more in addition to architectural clock gating. 258 When the WFI instruction is executed the ARM core would gate its internal 259 clocks. In addition to gating the clocks, QCOM cpus use this instruction as a 260 trigger to execute the SPM state machine. The SPM state machine waits for the 261 interrupt to trigger the core back in to active. This triggers the cache 262 hierarchy to enter standby states, when all cpus are idle. An interrupt brings 263 the SPM state machine out of its wait, the next step is to ensure that the 264 cache hierarchy is also out of standby, and then the cpu is allowed to resume 265 execution. This state is defined as a generic ARM WFI state by the ARM cpuidle 266 driver and is not defined in the DT. The SPM state machine should be 267 configured to execute this state by default and after executing every other 268 state below. 269 270 Retention: Retention is a low power state where the core is clock gated and 271 the memory and the registers associated with the core are retained. The 272 voltage may be reduced to the minimum value needed to keep the processor 273 registers active. The SPM should be configured to execute the retention 274 sequence and would wait for interrupt, before restoring the cpu to execution 275 state. Retention may have a slightly higher latency than Standby. 276 277 Standalone PC: A cpu can power down and warmboot if there is a sufficient time 278 between the time it enters idle and the next known wake up. SPC mode is used 279 to indicate a core entering a power down state without consulting any other 280 cpu or the system resources. This helps save power only on that core. The SPM 281 sequence for this idle state is programmed to power down the supply to the 282 core, wait for the interrupt, restore power to the core, and ensure the 283 system state including cache hierarchy is ready before allowing core to 284 resume. Applying power and resetting the core causes the core to warmboot 285 back into Elevation Level (EL) which trampolines the control back to the 286 kernel. Entering a power down state for the cpu, needs to be done by trapping 287 into a EL. Failing to do so, would result in a crash enforced by the warm boot 288 code in the EL for the SoC. On SoCs with write-back L1 cache, the cache has to 289 be flushed in s/w, before powering down the core. 290 291 Power Collapse: This state is similar to the SPC mode, but distinguishes 292 itself in that the cpu acknowledges and permits the SoC to enter deeper sleep 293 modes. In a hierarchical power domain SoC, this means L2 and other caches can 294 be flushed, system bus, clocks - lowered, and SoC main XO clock gated and 295 voltages reduced, provided all cpus enter this state. Since the span of low 296 power modes possible at this state is vast, the exit latency and the residency 297 of this low power mode would be considered high even though at a cpu level, 298 this essentially is cpu power down. The SPM in this state also may handshake 299 with the Resource power manager (RPM) processor in the SoC to indicate a 300 complete application processor subsystem shut down. 301 302 =========================================== 303 7 - References 304 =========================================== 305 306 [1] ARM Linux Kernel documentation - CPUs bindings 307 Documentation/devicetree/bindings/arm/cpus.yaml 308 309 [2] ARM Linux Kernel documentation - PSCI bindings 310 Documentation/devicetree/bindings/arm/psci.yaml 311 312 [3] ARM Server Base System Architecture (SBSA) 313 http://infocenter.arm.com/help/index.jsp 314 315 [4] ARM Architecture Reference Manuals 316 http://infocenter.arm.com/help/index.jsp 317 318 [5] ARM Linux Kernel documentation - Booting AArch64 Linux 319 Documentation/arch/arm64/booting.rst 320 321 [6] RISC-V Linux Kernel documentation - CPUs bindings 322 Documentation/devicetree/bindings/riscv/cpus.yaml 323 324 [7] RISC-V Supervisor Binary Interface (SBI) 325 http://github.com/riscv/riscv-sbi-doc/riscv-sbi.adoc 326 327properties: 328 $nodename: 329 const: idle-states 330 331 entry-method: 332 description: | 333 Usage and definition depend on ARM architecture version. 334 335 On ARM v8 64-bit this property is required. 336 On ARM 32-bit systems this property is optional 337 338 This assumes that the "enable-method" property is set to "psci" in the cpu 339 node[5] that is responsible for setting up CPU idle management in the OS 340 implementation. 341 const: psci 342 343patternProperties: 344 "^(cpu|cluster)-": 345 type: object 346 description: | 347 Each state node represents an idle state description and must be defined 348 as follows. 349 350 The idle state entered by executing the wfi instruction (idle_standby 351 SBSA,[3][4]) is considered standard on all ARM and RISC-V platforms and 352 therefore must not be listed. 353 354 In addition to the properties listed above, a state node may require 355 additional properties specific to the entry-method defined in the 356 idle-states node. Please refer to the entry-method bindings 357 documentation for properties definitions. 358 359 properties: 360 compatible: 361 oneOf: 362 - items: 363 - enum: 364 - qcom,idle-state-ret 365 - qcom,idle-state-spc 366 - qcom,idle-state-pc 367 - const: arm,idle-state 368 - enum: 369 - arm,idle-state 370 - riscv,idle-state 371 372 arm,psci-suspend-param: 373 $ref: /schemas/types.yaml#/definitions/uint32 374 description: | 375 power_state parameter to pass to the ARM PSCI suspend call. 376 377 Device tree nodes that require usage of PSCI CPU_SUSPEND function 378 (i.e. idle states node with entry-method property is set to "psci") 379 must specify this property. 380 381 riscv,sbi-suspend-param: 382 $ref: /schemas/types.yaml#/definitions/uint32 383 description: | 384 suspend_type parameter to pass to the RISC-V SBI HSM suspend call. 385 386 This property is required in idle state nodes of device tree meant 387 for RISC-V systems. For more details on the suspend_type parameter 388 refer the SBI specification v0.3 (or higher) [7]. 389 390 local-timer-stop: 391 description: 392 If present the CPU local timer control logic is 393 lost on state entry, otherwise it is retained. 394 type: boolean 395 396 entry-latency-us: 397 description: 398 Worst case latency in microseconds required to enter the idle state. 399 400 exit-latency-us: 401 description: 402 Worst case latency in microseconds required to exit the idle state. 403 The exit-latency-us duration may be guaranteed only after 404 entry-latency-us has passed. 405 406 min-residency-us: 407 description: 408 Minimum residency duration in microseconds, inclusive of preparation 409 and entry, for this idle state to be considered worthwhile energy wise 410 (refer to section 2 of this document for a complete description). 411 412 wakeup-latency-us: 413 description: | 414 Maximum delay between the signaling of a wake-up event and the CPU 415 being able to execute normal code again. If omitted, this is assumed 416 to be equal to: 417 418 entry-latency-us + exit-latency-us 419 420 It is important to supply this value on systems where the duration of 421 PREP phase (see diagram 1, section 2) is non-neglibigle. In such 422 systems entry-latency-us + exit-latency-us will exceed 423 wakeup-latency-us by this duration. 424 425 idle-state-name: 426 $ref: /schemas/types.yaml#/definitions/string 427 description: 428 A string used as a descriptive name for the idle state. 429 430 additionalProperties: false 431 432 required: 433 - compatible 434 - entry-latency-us 435 - exit-latency-us 436 - min-residency-us 437 438additionalProperties: false 439 440examples: 441 - | 442 443 cpus { 444 #size-cells = <0>; 445 #address-cells = <2>; 446 447 cpu@0 { 448 device_type = "cpu"; 449 compatible = "arm,cortex-a57"; 450 reg = <0x0 0x0>; 451 enable-method = "psci"; 452 cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>, 453 <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>; 454 }; 455 456 cpu@1 { 457 device_type = "cpu"; 458 compatible = "arm,cortex-a57"; 459 reg = <0x0 0x1>; 460 enable-method = "psci"; 461 cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>, 462 <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>; 463 }; 464 465 cpu@100 { 466 device_type = "cpu"; 467 compatible = "arm,cortex-a57"; 468 reg = <0x0 0x100>; 469 enable-method = "psci"; 470 cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>, 471 <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>; 472 }; 473 474 cpu@101 { 475 device_type = "cpu"; 476 compatible = "arm,cortex-a57"; 477 reg = <0x0 0x101>; 478 enable-method = "psci"; 479 cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>, 480 <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>; 481 }; 482 483 cpu@10000 { 484 device_type = "cpu"; 485 compatible = "arm,cortex-a57"; 486 reg = <0x0 0x10000>; 487 enable-method = "psci"; 488 cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>, 489 <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>; 490 }; 491 492 cpu@10001 { 493 device_type = "cpu"; 494 compatible = "arm,cortex-a57"; 495 reg = <0x0 0x10001>; 496 enable-method = "psci"; 497 cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>, 498 <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>; 499 }; 500 501 cpu@10100 { 502 device_type = "cpu"; 503 compatible = "arm,cortex-a57"; 504 reg = <0x0 0x10100>; 505 enable-method = "psci"; 506 cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>, 507 <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>; 508 }; 509 510 cpu@10101 { 511 device_type = "cpu"; 512 compatible = "arm,cortex-a57"; 513 reg = <0x0 0x10101>; 514 enable-method = "psci"; 515 cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>, 516 <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>; 517 }; 518 519 cpu@100000000 { 520 device_type = "cpu"; 521 compatible = "arm,cortex-a53"; 522 reg = <0x1 0x0>; 523 enable-method = "psci"; 524 cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>, 525 <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>; 526 }; 527 528 cpu@100000001 { 529 device_type = "cpu"; 530 compatible = "arm,cortex-a53"; 531 reg = <0x1 0x1>; 532 enable-method = "psci"; 533 cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>, 534 <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>; 535 }; 536 537 cpu@100000100 { 538 device_type = "cpu"; 539 compatible = "arm,cortex-a53"; 540 reg = <0x1 0x100>; 541 enable-method = "psci"; 542 cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>, 543 <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>; 544 }; 545 546 cpu@100000101 { 547 device_type = "cpu"; 548 compatible = "arm,cortex-a53"; 549 reg = <0x1 0x101>; 550 enable-method = "psci"; 551 cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>, 552 <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>; 553 }; 554 555 cpu@100010000 { 556 device_type = "cpu"; 557 compatible = "arm,cortex-a53"; 558 reg = <0x1 0x10000>; 559 enable-method = "psci"; 560 cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>, 561 <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>; 562 }; 563 564 cpu@100010001 { 565 device_type = "cpu"; 566 compatible = "arm,cortex-a53"; 567 reg = <0x1 0x10001>; 568 enable-method = "psci"; 569 cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>, 570 <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>; 571 }; 572 573 cpu@100010100 { 574 device_type = "cpu"; 575 compatible = "arm,cortex-a53"; 576 reg = <0x1 0x10100>; 577 enable-method = "psci"; 578 cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>, 579 <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>; 580 }; 581 582 cpu@100010101 { 583 device_type = "cpu"; 584 compatible = "arm,cortex-a53"; 585 reg = <0x1 0x10101>; 586 enable-method = "psci"; 587 cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>, 588 <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>; 589 }; 590 591 idle-states { 592 entry-method = "psci"; 593 594 CPU_RETENTION_0_0: cpu-retention-0-0 { 595 compatible = "arm,idle-state"; 596 arm,psci-suspend-param = <0x0010000>; 597 entry-latency-us = <20>; 598 exit-latency-us = <40>; 599 min-residency-us = <80>; 600 }; 601 602 CLUSTER_RETENTION_0: cluster-retention-0 { 603 compatible = "arm,idle-state"; 604 local-timer-stop; 605 arm,psci-suspend-param = <0x1010000>; 606 entry-latency-us = <50>; 607 exit-latency-us = <100>; 608 min-residency-us = <250>; 609 wakeup-latency-us = <130>; 610 }; 611 612 CPU_SLEEP_0_0: cpu-sleep-0-0 { 613 compatible = "arm,idle-state"; 614 local-timer-stop; 615 arm,psci-suspend-param = <0x0010000>; 616 entry-latency-us = <250>; 617 exit-latency-us = <500>; 618 min-residency-us = <950>; 619 }; 620 621 CLUSTER_SLEEP_0: cluster-sleep-0 { 622 compatible = "arm,idle-state"; 623 local-timer-stop; 624 arm,psci-suspend-param = <0x1010000>; 625 entry-latency-us = <600>; 626 exit-latency-us = <1100>; 627 min-residency-us = <2700>; 628 wakeup-latency-us = <1500>; 629 }; 630 631 CPU_RETENTION_1_0: cpu-retention-1-0 { 632 compatible = "arm,idle-state"; 633 arm,psci-suspend-param = <0x0010000>; 634 entry-latency-us = <20>; 635 exit-latency-us = <40>; 636 min-residency-us = <90>; 637 }; 638 639 CLUSTER_RETENTION_1: cluster-retention-1 { 640 compatible = "arm,idle-state"; 641 local-timer-stop; 642 arm,psci-suspend-param = <0x1010000>; 643 entry-latency-us = <50>; 644 exit-latency-us = <100>; 645 min-residency-us = <270>; 646 wakeup-latency-us = <100>; 647 }; 648 649 CPU_SLEEP_1_0: cpu-sleep-1-0 { 650 compatible = "arm,idle-state"; 651 local-timer-stop; 652 arm,psci-suspend-param = <0x0010000>; 653 entry-latency-us = <70>; 654 exit-latency-us = <100>; 655 min-residency-us = <300>; 656 wakeup-latency-us = <150>; 657 }; 658 659 CLUSTER_SLEEP_1: cluster-sleep-1 { 660 compatible = "arm,idle-state"; 661 local-timer-stop; 662 arm,psci-suspend-param = <0x1010000>; 663 entry-latency-us = <500>; 664 exit-latency-us = <1200>; 665 min-residency-us = <3500>; 666 wakeup-latency-us = <1300>; 667 }; 668 }; 669 }; 670 671 - | 672 // Example 2 (ARM 32-bit, 8-cpu system, two clusters): 673 674 cpus { 675 #size-cells = <0>; 676 #address-cells = <1>; 677 678 cpu@0 { 679 device_type = "cpu"; 680 compatible = "arm,cortex-a15"; 681 reg = <0x0>; 682 cpu-idle-states = <&cpu_sleep_0_0>, <&cluster_sleep_0>; 683 }; 684 685 cpu@1 { 686 device_type = "cpu"; 687 compatible = "arm,cortex-a15"; 688 reg = <0x1>; 689 cpu-idle-states = <&cpu_sleep_0_0>, <&cluster_sleep_0>; 690 }; 691 692 cpu@2 { 693 device_type = "cpu"; 694 compatible = "arm,cortex-a15"; 695 reg = <0x2>; 696 cpu-idle-states = <&cpu_sleep_0_0>, <&cluster_sleep_0>; 697 }; 698 699 cpu@3 { 700 device_type = "cpu"; 701 compatible = "arm,cortex-a15"; 702 reg = <0x3>; 703 cpu-idle-states = <&cpu_sleep_0_0>, <&cluster_sleep_0>; 704 }; 705 706 cpu@100 { 707 device_type = "cpu"; 708 compatible = "arm,cortex-a7"; 709 reg = <0x100>; 710 cpu-idle-states = <&cpu_sleep_1_0>, <&cluster_sleep_1>; 711 }; 712 713 cpu@101 { 714 device_type = "cpu"; 715 compatible = "arm,cortex-a7"; 716 reg = <0x101>; 717 cpu-idle-states = <&cpu_sleep_1_0>, <&cluster_sleep_1>; 718 }; 719 720 cpu@102 { 721 device_type = "cpu"; 722 compatible = "arm,cortex-a7"; 723 reg = <0x102>; 724 cpu-idle-states = <&cpu_sleep_1_0>, <&cluster_sleep_1>; 725 }; 726 727 cpu@103 { 728 device_type = "cpu"; 729 compatible = "arm,cortex-a7"; 730 reg = <0x103>; 731 cpu-idle-states = <&cpu_sleep_1_0>, <&cluster_sleep_1>; 732 }; 733 734 idle-states { 735 cpu_sleep_0_0: cpu-sleep-0-0 { 736 compatible = "arm,idle-state"; 737 local-timer-stop; 738 entry-latency-us = <200>; 739 exit-latency-us = <100>; 740 min-residency-us = <400>; 741 wakeup-latency-us = <250>; 742 }; 743 744 cluster_sleep_0: cluster-sleep-0 { 745 compatible = "arm,idle-state"; 746 local-timer-stop; 747 entry-latency-us = <500>; 748 exit-latency-us = <1500>; 749 min-residency-us = <2500>; 750 wakeup-latency-us = <1700>; 751 }; 752 753 cpu_sleep_1_0: cpu-sleep-1-0 { 754 compatible = "arm,idle-state"; 755 local-timer-stop; 756 entry-latency-us = <300>; 757 exit-latency-us = <500>; 758 min-residency-us = <900>; 759 wakeup-latency-us = <600>; 760 }; 761 762 cluster_sleep_1: cluster-sleep-1 { 763 compatible = "arm,idle-state"; 764 local-timer-stop; 765 entry-latency-us = <800>; 766 exit-latency-us = <2000>; 767 min-residency-us = <6500>; 768 wakeup-latency-us = <2300>; 769 }; 770 }; 771 }; 772 773 - | 774 // Example 3 (RISC-V 64-bit, 4-cpu systems, two clusters): 775 776 cpus { 777 #size-cells = <0>; 778 #address-cells = <1>; 779 780 cpu@0 { 781 device_type = "cpu"; 782 compatible = "riscv"; 783 reg = <0x0>; 784 riscv,isa = "rv64imafdc"; 785 mmu-type = "riscv,sv48"; 786 cpu-idle-states = <&CPU_RET_0_0>, <&CPU_NONRET_0_0>, 787 <&CLUSTER_RET_0>, <&CLUSTER_NONRET_0>; 788 789 cpu_intc0: interrupt-controller { 790 #interrupt-cells = <1>; 791 compatible = "riscv,cpu-intc"; 792 interrupt-controller; 793 }; 794 }; 795 796 cpu@1 { 797 device_type = "cpu"; 798 compatible = "riscv"; 799 reg = <0x1>; 800 riscv,isa = "rv64imafdc"; 801 mmu-type = "riscv,sv48"; 802 cpu-idle-states = <&CPU_RET_0_0>, <&CPU_NONRET_0_0>, 803 <&CLUSTER_RET_0>, <&CLUSTER_NONRET_0>; 804 805 cpu_intc1: interrupt-controller { 806 #interrupt-cells = <1>; 807 compatible = "riscv,cpu-intc"; 808 interrupt-controller; 809 }; 810 }; 811 812 cpu@10 { 813 device_type = "cpu"; 814 compatible = "riscv"; 815 reg = <0x10>; 816 riscv,isa = "rv64imafdc"; 817 mmu-type = "riscv,sv48"; 818 cpu-idle-states = <&CPU_RET_1_0>, <&CPU_NONRET_1_0>, 819 <&CLUSTER_RET_1>, <&CLUSTER_NONRET_1>; 820 821 cpu_intc10: interrupt-controller { 822 #interrupt-cells = <1>; 823 compatible = "riscv,cpu-intc"; 824 interrupt-controller; 825 }; 826 }; 827 828 cpu@11 { 829 device_type = "cpu"; 830 compatible = "riscv"; 831 reg = <0x11>; 832 riscv,isa = "rv64imafdc"; 833 mmu-type = "riscv,sv48"; 834 cpu-idle-states = <&CPU_RET_1_0>, <&CPU_NONRET_1_0>, 835 <&CLUSTER_RET_1>, <&CLUSTER_NONRET_1>; 836 837 cpu_intc11: interrupt-controller { 838 #interrupt-cells = <1>; 839 compatible = "riscv,cpu-intc"; 840 interrupt-controller; 841 }; 842 }; 843 844 idle-states { 845 CPU_RET_0_0: cpu-retentive-0-0 { 846 compatible = "riscv,idle-state"; 847 riscv,sbi-suspend-param = <0x10000000>; 848 entry-latency-us = <20>; 849 exit-latency-us = <40>; 850 min-residency-us = <80>; 851 }; 852 853 CPU_NONRET_0_0: cpu-nonretentive-0-0 { 854 compatible = "riscv,idle-state"; 855 riscv,sbi-suspend-param = <0x90000000>; 856 entry-latency-us = <250>; 857 exit-latency-us = <500>; 858 min-residency-us = <950>; 859 }; 860 861 CLUSTER_RET_0: cluster-retentive-0 { 862 compatible = "riscv,idle-state"; 863 riscv,sbi-suspend-param = <0x11000000>; 864 local-timer-stop; 865 entry-latency-us = <50>; 866 exit-latency-us = <100>; 867 min-residency-us = <250>; 868 wakeup-latency-us = <130>; 869 }; 870 871 CLUSTER_NONRET_0: cluster-nonretentive-0 { 872 compatible = "riscv,idle-state"; 873 riscv,sbi-suspend-param = <0x91000000>; 874 local-timer-stop; 875 entry-latency-us = <600>; 876 exit-latency-us = <1100>; 877 min-residency-us = <2700>; 878 wakeup-latency-us = <1500>; 879 }; 880 881 CPU_RET_1_0: cpu-retentive-1-0 { 882 compatible = "riscv,idle-state"; 883 riscv,sbi-suspend-param = <0x10000010>; 884 entry-latency-us = <20>; 885 exit-latency-us = <40>; 886 min-residency-us = <80>; 887 }; 888 889 CPU_NONRET_1_0: cpu-nonretentive-1-0 { 890 compatible = "riscv,idle-state"; 891 riscv,sbi-suspend-param = <0x90000010>; 892 entry-latency-us = <250>; 893 exit-latency-us = <500>; 894 min-residency-us = <950>; 895 }; 896 897 CLUSTER_RET_1: cluster-retentive-1 { 898 compatible = "riscv,idle-state"; 899 riscv,sbi-suspend-param = <0x11000010>; 900 local-timer-stop; 901 entry-latency-us = <50>; 902 exit-latency-us = <100>; 903 min-residency-us = <250>; 904 wakeup-latency-us = <130>; 905 }; 906 907 CLUSTER_NONRET_1: cluster-nonretentive-1 { 908 compatible = "riscv,idle-state"; 909 riscv,sbi-suspend-param = <0x91000010>; 910 local-timer-stop; 911 entry-latency-us = <600>; 912 exit-latency-us = <1100>; 913 min-residency-us = <2700>; 914 wakeup-latency-us = <1500>; 915 }; 916 }; 917 }; 918 919 // Example 4 - Qualcomm SPC 920 idle-states { 921 cpu_spc: cpu-spc { 922 compatible = "qcom,idle-state-spc", "arm,idle-state"; 923 entry-latency-us = <150>; 924 exit-latency-us = <200>; 925 min-residency-us = <2000>; 926 }; 927 }; 928... 929