/linux/Documentation/devicetree/bindings/mfd/ |
H A D | ti,lp87524-q1.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/mfd/ti,lp87524-q1.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: TI LP87524-Q1 four 1-phase output buck converter 10 - Keerthy <j-keerthy@ti.com> 14 const: ti,lp87524-q1 20 reset-gpios: 24 gpio-controller: true 26 '#gpio-cells': [all …]
|
H A D | richtek,rt5120.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - ChiYuan Huang <cy_huang@richtek.com> 13 The RT5120 provides four high-efficiency buck converters and one LDO voltage 15 I/O, and peripheral rails in home entertainment devices. The I2C interface is 22 - richtek,rt5120 30 interrupt-controller: true 32 "#interrupt-cells": 35 wakeup-source: true [all …]
|
H A D | maxim,max77802.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Javier Martinez Canillas <javier@dowhile0.org> 11 - Krzysztof Kozlowski <krzk@kernel.org> 18 current regulators (10 high efficiency Buck regulators and 32 Low-DropOut 23 in dt-bindings/clock/maxim,max77802.h. 29 '#clock-cells': 43 inb1-supply: 44 description: Power supply for buck1 [all …]
|
H A D | da9055.txt | 3 DA9055 consists of a large and varied group of sub-devices (I2C Only): 5 Device Supply Names Description 6 ------ ------------ ----------- 7 da9055-gpio : : GPIOs 8 da9055-regulator : : Regulators 9 da9055-onkey : : On key 10 da9055-rtc : : RTC 11 da9055-hwmon : : ADC 12 da9055-watchdog : : Watchdog 14 The CODEC device in DA9055 has a separate, configurable I2C address and so [all …]
|
H A D | ti,lp87565-q1.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/mfd/ti,lp87565-q1.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: TI LP87565-Q1 / LP87565 dual 2-phase output buck converter 10 - Keerthy <j-keerthy@ti.com> 15 - ti,lp87565 16 - ti,lp87565-q1 22 reset-gpios: 26 gpio-controller: true [all …]
|
H A D | da9052-i2c.txt | 4 - compatible : Should be "dlg,da9052", "dlg,da9053-aa", 5 "dlg,da9053-ab", or "dlg,da9053-bb" 8 - dlg,tsi-as-adc : Boolean, if set the X+, X-, Y+, Y- touchscreen 11 - tsiref-supply: Phandle to the regulator, which provides the reference 15 Sub-nodes: 16 - regulators : Contain the regulator nodes. The DA9052/53 regulators are 19 buck1 : regulator BUCK CORE 34 The bindings details of individual regulator device can be found in: 42 compatible = "dlg,da9053-aa"; 46 buck1 { [all …]
|
/linux/arch/arm/boot/dts/ti/omap/ |
H A D | dra71-evm.dts | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/ 7 #include "dra7-mmc-iodelay.dtsi" 8 #include "dra72x-mmc-iodelay.dtsi" 9 #include <dt-bindings/net/ti-dp83867.h> 12 compatible = "ti,dra718-evm", "ti,dra718", "ti,dra722", "ti,dra72", "ti,dra7"; 20 reserved-memory { 21 #address-cells = <2>; 22 #size-cells = <2>; 25 ipu2_memory_region: ipu2-memory@95800000 { [all …]
|
/linux/Documentation/devicetree/bindings/regulator/ |
H A D | richtek,rt5190a-regulator.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 3 --- 4 $id: http://devicetree.org/schemas/regulator/richtek,rt5190a-regulator.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - ChiYuan Huang <cy_huang@richtek.com> 23 - richtek,rt5190a 31 vin2-supply: 34 vin3-supply: 37 vin4-supply: 40 vinldo-supply: [all …]
|
H A D | ti,tps65219.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Jerome Neanne <jerome.neanne@baylibre.com> 18 - ti,tps65219 23 system-power-controller: 29 description: Short-circuit, over-current, under-voltage for regulators, PB interrupts. 32 interrupt-controller: true 34 '#interrupt-cells': 35 description: Specifies the PIN numbers and Flags, as defined in [all …]
|
H A D | maxim,max8997.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Krzysztof Kozlowski <krzk@kernel.org> 15 motor driver, flash LED driver and Micro-USB Interface Controller. 22 const: maxim,max8997-pmic 24 charger-supply: 30 - description: irq1 interrupt 31 - description: alert interrupt 33 max8997,pmic-buck1-dvs-voltage: [all …]
|
H A D | microchip,mcp16502.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: MCP16502 - High-Performance PMIC 10 - Andrei Simion <andrei.simion@microchip.com> 16 of High-Performance mode (HPM). 22 lpm-gpios: 26 suspend-to-ram, keeping the PMIC into HIBERNATE mode. 31 lvin-supply: 32 description: Input supply phandle for LDO1 and LDO2 [all …]
|
/linux/arch/arm64/boot/dts/freescale/ |
H A D | imx8mn-ddr4-evk.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 /dts-v1/; 9 #include "imx8mn-evk.dtsi" 13 compatible = "fsl,imx8mn-ddr4-evk", "fsl,imx8mn"; 17 cpu-supply = <&buck2_reg>; 21 cpu-supply = <&buck2_reg>; 25 cpu-supply = <&buck2_reg>; 29 cpu-supply = <&buck2_reg>; 33 operating-points-v2 = <&ddrc_opp_table>; 35 ddrc_opp_table: opp-table { [all …]
|
H A D | imx8mp-beacon-som.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 18 reg_wl_bt: regulator-wifi-bt { 19 compatible = "regulator-fixed"; 20 pinctrl-names = "default"; 21 pinctrl-0 = <&pinctrl_reg_wl_bt>; 22 regulator-name = "wl-bt-pow-dwn"; 23 regulator-min-microvolt = <3300000>; 24 regulator-max-microvolt = <3300000>; 26 startup-delay-us = <70000>; 27 regulator-always-on; [all …]
|
H A D | imx8mm-tqma8mqml.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) 3 * Copyright 2020-2021 TQ-Systems GmbH 6 #include <dt-bindings/phy/phy-imx8-pcie.h> 10 model = "TQ-Systems GmbH i.MX8MM TQMa8MxML"; 11 compatible = "tq,imx8mm-tqma8mqml", "fsl,imx8mm"; 19 /* e-MMC IO, needed for HS modes */ 20 reg_vcc1v8: regulator-vcc1v8 { 21 compatible = "regulator-fixed"; 22 regulator-name = "TQMA8MXML_VCC1V8"; 23 regulator-min-microvolt = <1800000>; [all …]
|
H A D | imx8mn-beacon-som.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 6 #include "imx8mn-overdrive.dtsi" 16 compatible = "mmc-pwrseq-simple"; 17 pinctrl-names = "default"; 18 pinctrl-0 = <&pinctrl_usdhc1_gpio>; 19 reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; 21 clock-names = "ext_clock"; 22 post-power-on-delay-ms = <80>; 32 cpu-supply = <&buck2_reg>; 36 cpu-supply = <&buck2_reg>; [all …]
|
H A D | imx8mm-innocomm-wb15.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 7 #include <dt-bindings/phy/phy-imx8-pcie.h> 10 reg_modem: regulator-modem { 11 compatible = "regulator-fixed"; 12 pinctrl-names = "default"; 13 pinctrl-0 = <&pinctrl_modem_regulator>; 14 regulator-min-microvolt = <3300000>; 15 regulator-max-microvolt = <3300000>; 16 regulator-name = "epdev_on"; 18 enable-active-high; [all …]
|
H A D | imx8mm-phycore-som.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 8 #include <dt-bindings/net/ti-dp83867.h> 11 model = "PHYTEC phyCORE-i.MX8MM"; 12 compatible = "phytec,imx8mm-phycore-som", "fsl,imx8mm"; 24 reg_vdd_3v3_s: regulator-vdd-3v3-s { 25 compatible = "regulator-fixed"; 26 regulator-always-on; 27 regulator-boot-on; 28 regulator-max-microvolt = <3300000>; 29 regulator-min-microvolt = <3300000>; [all …]
|
H A D | imx8mm-beacon-som.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 6 #include "imx8mm-overdrive.dtsi" 15 compatible = "mmc-pwrseq-simple"; 16 pinctrl-names = "default"; 17 pinctrl-0 = <&pinctrl_usdhc1_gpio>; 18 reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; 20 clock-names = "ext_clock"; 21 post-power-on-delay-ms = <80>; 31 cpu-supply = <&buck2_reg>; 35 cpu-supply = <&buck2_reg>; [all …]
|
H A D | imx8mm-var-som.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 10 model = "Variscite VAR-SOM-MX8MM module"; 13 stdout-path = &uart4; 21 reg_eth_phy: regulator-eth-phy { 22 compatible = "regulator-fixed"; 23 pinctrl-names = "default"; 24 pinctrl-0 = <&pinctrl_reg_eth_phy>; 25 regulator-name = "eth_phy_pwr"; 26 regulator-min-microvolt = <3300000>; 27 regulator-max-microvolt = <3300000>; [all …]
|
H A D | imx8mn-var-som.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 4 * Copyright 2019-2020 Variscite Ltd. 11 model = "Variscite VAR-SOM-MX8MN module"; 12 compatible = "variscite,var-som-mx8mn", "fsl,imx8mn"; 15 stdout-path = &uart4; 23 reg_eth_phy: regulator-eth-phy { 24 compatible = "regulator-fixed"; 25 pinctrl-names = "default"; 26 pinctrl-0 = <&pinctrl_reg_eth_phy>; 27 regulator-name = "eth_phy_pwr"; [all …]
|
/linux/arch/arm/boot/dts/synaptics/ |
H A D | berlin2cd-valve-steamlink.dts | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 5 /dts-v1/; 8 #include <dt-bindings/gpio/gpio.h> 19 gpio-restart { 20 compatible = "gpio-restart"; 22 active-delay = <100>; 23 inactive-delay = <10>; 24 wait-delay = <100>; 30 cpu-supply = <&vcpu>; 31 operating-points = < [all …]
|
/linux/arch/arm/boot/dts/samsung/ |
H A D | s5pv210-aries.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 6 /dts-v1/; 7 #include <dt-bindings/gpio/gpio.h> 8 #include <dt-bindings/interrupt-controller/irq.h> 32 reserved-memory { 33 #address-cells = <1>; 34 #size-cells = <1>; 38 compatible = "shared-dma-pool"; 39 no-map; 44 compatible = "shared-dma-pool"; [all …]
|
/linux/arch/arm/boot/dts/nxp/imx/ |
H A D | imx7d-remarkable2.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 4 * Copyright (C) 2019 reMarkable AS - http://www.remarkable.com/ 8 /dts-v1/; 11 #include <dt-bindings/input/linux-event-codes.h> 15 compatible = "remarkable,imx7d-remarkable2", "fsl,imx7d"; 18 stdout-path = &uart6; 26 thermal-zones { 27 epd-thermal { 28 thermal-sensors = <&sy7636a>; 29 polling-delay-passive = <30000>; [all …]
|
/linux/arch/arm64/boot/dts/ti/ |
H A D | k3-am68-sk-base-board.dts | 1 // SPDX-License-Identifier: GPL-2.0-only OR MIT 3 * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/ 8 /dts-v1/; 10 #include "k3-am68-sk-som.dtsi" 11 #include <dt-bindings/net/ti-dp83867.h> 12 #include <dt-bindings/phy/phy-cadence.h> 13 #include <dt-bindings/phy/phy.h> 15 #include "k3-serdes.h" 18 compatible = "ti,am68-sk", "ti,j721s2"; 22 stdout-path = "serial2:115200n8"; [all …]
|
H A D | k3-am64-phycore-som.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only OR MIT 3 * Copyright (C) 2021-2024 PHYTEC America, LLC - https://www.phytec.com 6 * Copyright (C) 2022-2024 PHYTEC Messtechnik GmbH 10 * https://www.phytec.com/product/phycore-am64x 13 #include <dt-bindings/gpio/gpio.h> 14 #include <dt-bindings/leds/common.h> 15 #include <dt-bindings/net/ti-dp83867.h> 18 model = "PHYTEC phyCORE-AM64x"; 19 compatible = "phytec,am64-phycore-som", "ti,am642"; 32 reserved_memory: reserved-memory { [all …]
|