1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2021, The Linux Foundation. All rights reserved. 4 * Copyright (c) 2022, Linaro Limited 5 */ 6 7/dts-v1/; 8 9#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h> 10#include <dt-bindings/gpio/gpio.h> 11#include <dt-bindings/input/gpio-keys.h> 12#include <dt-bindings/input/input.h> 13#include <dt-bindings/leds/common.h> 14#include <dt-bindings/regulator/qcom,rpmh-regulator.h> 15 16#include "sc8280xp.dtsi" 17#include "sc8280xp-pmics.dtsi" 18 19/ { 20 model = "Lenovo ThinkPad X13s"; 21 compatible = "lenovo,thinkpad-x13s", "qcom,sc8280xp"; 22 23 aliases { 24 i2c4 = &i2c4; 25 i2c21 = &i2c21; 26 serial1 = &uart2; 27 }; 28 29 wcd938x: audio-codec { 30 compatible = "qcom,wcd9380-codec"; 31 32 pinctrl-names = "default"; 33 pinctrl-0 = <&wcd_default>; 34 35 reset-gpios = <&tlmm 106 GPIO_ACTIVE_LOW>; 36 37 vdd-buck-supply = <&vreg_s10b>; 38 vdd-rxtx-supply = <&vreg_s10b>; 39 vdd-io-supply = <&vreg_s10b>; 40 vdd-mic-bias-supply = <&vreg_bob>; 41 42 qcom,micbias1-microvolt = <1800000>; 43 qcom,micbias2-microvolt = <1800000>; 44 qcom,micbias3-microvolt = <1800000>; 45 qcom,micbias4-microvolt = <1800000>; 46 qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; 47 qcom,mbhc-headset-vthreshold-microvolt = <1700000>; 48 qcom,mbhc-headphone-vthreshold-microvolt = <50000>; 49 qcom,rx-device = <&wcd_rx>; 50 qcom,tx-device = <&wcd_tx>; 51 52 #sound-dai-cells = <1>; 53 }; 54 55 backlight: backlight { 56 compatible = "pwm-backlight"; 57 pwms = <&pmc8280c_lpg 3 1000000>; 58 enable-gpios = <&pmc8280_1_gpios 8 GPIO_ACTIVE_HIGH>; 59 power-supply = <&vreg_edp_bl>; 60 61 pinctrl-names = "default"; 62 pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>; 63 }; 64 65 gpio-keys { 66 compatible = "gpio-keys"; 67 68 pinctrl-names = "default"; 69 pinctrl-0 = <&hall_int_n_default>; 70 71 switch-lid { 72 gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; 73 linux,input-type = <EV_SW>; 74 linux,code = <SW_LID>; 75 wakeup-source; 76 wakeup-event-action = <EV_ACT_DEASSERTED>; 77 }; 78 }; 79 80 leds { 81 compatible = "gpio-leds"; 82 83 pinctrl-names = "default"; 84 pinctrl-0 = <&cam_indicator_en>; 85 86 led-camera-indicator { 87 label = "white:camera-indicator"; 88 function = LED_FUNCTION_INDICATOR; 89 color = <LED_COLOR_ID_WHITE>; 90 gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>; 91 linux,default-trigger = "none"; 92 default-state = "off"; 93 /* Reuse as a panic indicator until we get a "camera on" trigger */ 94 panic-indicator; 95 }; 96 }; 97 98 pmic-glink { 99 compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink"; 100 101 #address-cells = <1>; 102 #size-cells = <0>; 103 orientation-gpios = <&tlmm 166 GPIO_ACTIVE_HIGH>, 104 <&tlmm 49 GPIO_ACTIVE_HIGH>; 105 106 connector@0 { 107 compatible = "usb-c-connector"; 108 reg = <0>; 109 power-role = "dual"; 110 data-role = "dual"; 111 112 ports { 113 #address-cells = <1>; 114 #size-cells = <0>; 115 116 port@0 { 117 reg = <0>; 118 119 pmic_glink_con0_hs: endpoint { 120 remote-endpoint = <&usb_0_dwc3_hs>; 121 }; 122 }; 123 124 port@1 { 125 reg = <1>; 126 127 pmic_glink_con0_ss: endpoint { 128 remote-endpoint = <&usb_0_qmpphy_out>; 129 }; 130 }; 131 132 port@2 { 133 reg = <2>; 134 135 pmic_glink_con0_sbu: endpoint { 136 remote-endpoint = <&usb0_sbu_mux>; 137 }; 138 }; 139 }; 140 }; 141 142 connector@1 { 143 compatible = "usb-c-connector"; 144 reg = <1>; 145 power-role = "dual"; 146 data-role = "dual"; 147 148 ports { 149 #address-cells = <1>; 150 #size-cells = <0>; 151 port@0 { 152 reg = <0>; 153 154 pmic_glink_con1_hs: endpoint { 155 remote-endpoint = <&usb_1_dwc3_hs>; 156 }; 157 }; 158 159 port@1 { 160 reg = <1>; 161 162 pmic_glink_con1_ss: endpoint { 163 remote-endpoint = <&usb_1_qmpphy_out>; 164 }; 165 }; 166 167 port@2 { 168 reg = <2>; 169 170 pmic_glink_con1_sbu: endpoint { 171 remote-endpoint = <&usb1_sbu_mux>; 172 }; 173 }; 174 }; 175 }; 176 }; 177 178 vreg_edp_3p3: regulator-edp-3p3 { 179 compatible = "regulator-fixed"; 180 181 regulator-name = "VCC3LCD"; 182 regulator-min-microvolt = <3300000>; 183 regulator-max-microvolt = <3300000>; 184 185 gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>; 186 enable-active-high; 187 188 pinctrl-names = "default"; 189 pinctrl-0 = <&edp_reg_en>; 190 191 regulator-boot-on; 192 }; 193 194 vreg_edp_bl: regulator-edp-bl { 195 compatible = "regulator-fixed"; 196 197 regulator-name = "VBL9"; 198 regulator-min-microvolt = <3600000>; 199 regulator-max-microvolt = <3600000>; 200 201 gpio = <&pmc8280_1_gpios 9 GPIO_ACTIVE_HIGH>; 202 enable-active-high; 203 204 pinctrl-names = "default"; 205 pinctrl-0 = <&edp_bl_reg_en>; 206 207 regulator-boot-on; 208 }; 209 210 vreg_misc_3p3: regulator-misc-3p3 { 211 compatible = "regulator-fixed"; 212 213 regulator-name = "VCC3B"; 214 regulator-min-microvolt = <3300000>; 215 regulator-max-microvolt = <3300000>; 216 217 gpio = <&pmc8280_1_gpios 1 GPIO_ACTIVE_HIGH>; 218 enable-active-high; 219 220 pinctrl-names = "default"; 221 pinctrl-0 = <&misc_3p3_reg_en>; 222 223 regulator-boot-on; 224 regulator-always-on; 225 }; 226 227 vreg_nvme: regulator-nvme { 228 compatible = "regulator-fixed"; 229 230 regulator-name = "VCC3_SSD"; 231 regulator-min-microvolt = <3300000>; 232 regulator-max-microvolt = <3300000>; 233 234 gpio = <&tlmm 135 GPIO_ACTIVE_HIGH>; 235 enable-active-high; 236 237 pinctrl-names = "default"; 238 pinctrl-0 = <&nvme_reg_en>; 239 240 regulator-boot-on; 241 }; 242 243 vreg_vph_pwr: regulator-vph-pwr { 244 compatible = "regulator-fixed"; 245 246 regulator-name = "VPH_VCC3R9"; 247 regulator-min-microvolt = <3900000>; 248 regulator-max-microvolt = <3900000>; 249 250 regulator-always-on; 251 }; 252 253 vreg_wlan: regulator-wlan { 254 compatible = "regulator-fixed"; 255 256 regulator-name = "VCC_WLAN_3R9"; 257 regulator-min-microvolt = <3900000>; 258 regulator-max-microvolt = <3900000>; 259 260 gpio = <&pmr735a_gpios 1 GPIO_ACTIVE_HIGH>; 261 enable-active-high; 262 263 pinctrl-names = "default"; 264 pinctrl-0 = <&hastings_reg_en>; 265 266 regulator-boot-on; 267 }; 268 269 vreg_wwan: regulator-wwan { 270 compatible = "regulator-fixed"; 271 272 regulator-name = "VCC3B_WAN"; 273 regulator-min-microvolt = <3300000>; 274 regulator-max-microvolt = <3300000>; 275 276 gpio = <&pmc8280_2_gpios 1 GPIO_ACTIVE_HIGH>; 277 enable-active-high; 278 279 pinctrl-names = "default"; 280 pinctrl-0 = <&wwan_sw_en>; 281 282 regulator-boot-on; 283 }; 284 285 reserved-memory { 286 gpu_mem: gpu-mem@8bf00000 { 287 reg = <0 0x8bf00000 0 0x2000>; 288 no-map; 289 }; 290 291 linux,cma { 292 compatible = "shared-dma-pool"; 293 size = <0x0 0x8000000>; 294 reusable; 295 linux,cma-default; 296 }; 297 }; 298 299 thermal-zones { 300 pm8008-thermal { 301 polling-delay-passive = <100>; 302 polling-delay = <0>; 303 304 thermal-sensors = <&pm8008>; 305 306 trips { 307 trip0 { 308 temperature = <95000>; 309 hysteresis = <0>; 310 type = "passive"; 311 }; 312 313 trip1 { 314 temperature = <115000>; 315 hysteresis = <0>; 316 type = "critical"; 317 }; 318 }; 319 }; 320 321 skin-temp-thermal { 322 polling-delay-passive = <250>; 323 324 thermal-sensors = <&pmk8280_adc_tm 5>; 325 326 trips { 327 skin_temp_alert0: trip-point0 { 328 temperature = <55000>; 329 hysteresis = <1000>; 330 type = "passive"; 331 }; 332 333 skin_temp_alert1: trip-point1 { 334 temperature = <58000>; 335 hysteresis = <1000>; 336 type = "passive"; 337 }; 338 339 skin-temp-crit { 340 temperature = <73000>; 341 hysteresis = <1000>; 342 type = "critical"; 343 }; 344 }; 345 346 cooling-maps { 347 map0 { 348 trip = <&skin_temp_alert0>; 349 cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 350 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 351 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 352 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 353 }; 354 355 map1 { 356 trip = <&skin_temp_alert1>; 357 cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 358 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 359 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 360 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 361 }; 362 }; 363 }; 364 }; 365 366 usb0-sbu-mux { 367 compatible = "pericom,pi3usb102", "gpio-sbu-mux"; 368 369 enable-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>; 370 select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>; 371 372 pinctrl-names = "default"; 373 pinctrl-0 = <&usb0_sbu_default>; 374 375 mode-switch; 376 orientation-switch; 377 378 port { 379 usb0_sbu_mux: endpoint { 380 remote-endpoint = <&pmic_glink_con0_sbu>; 381 }; 382 }; 383 }; 384 385 usb1-sbu-mux { 386 compatible = "pericom,pi3usb102", "gpio-sbu-mux"; 387 388 enable-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>; 389 select-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; 390 391 pinctrl-names = "default"; 392 pinctrl-0 = <&usb1_sbu_default>; 393 394 mode-switch; 395 orientation-switch; 396 397 port { 398 usb1_sbu_mux: endpoint { 399 remote-endpoint = <&pmic_glink_con1_sbu>; 400 }; 401 }; 402 }; 403 404 wcn6855-pmu { 405 compatible = "qcom,wcn6855-pmu"; 406 407 pinctrl-0 = <&bt_default>, <&wlan_en>; 408 pinctrl-names = "default"; 409 410 wlan-enable-gpios = <&tlmm 134 GPIO_ACTIVE_HIGH>; 411 bt-enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>; 412 swctrl-gpios = <&tlmm 132 GPIO_ACTIVE_HIGH>; 413 414 vddio-supply = <&vreg_s10b>; 415 vddaon-supply = <&vreg_s12b>; 416 vddpmu-supply = <&vreg_s12b>; 417 vddpmumx-supply = <&vreg_s12b>; 418 vddpmucx-supply = <&vreg_s12b>; 419 vddrfa0p95-supply = <&vreg_s12b>; 420 vddrfa1p3-supply = <&vreg_s11b>; 421 vddrfa1p9-supply = <&vreg_s1c>; 422 vddpcie1p3-supply = <&vreg_s11b>; 423 vddpcie1p9-supply = <&vreg_s1c>; 424 425 regulators { 426 vreg_pmu_rfa_cmn_0p8: ldo0 { 427 regulator-name = "vreg_pmu_rfa_cmn_0p8"; 428 }; 429 430 vreg_pmu_aon_0p8: ldo1 { 431 regulator-name = "vreg_pmu_aon_0p8"; 432 }; 433 434 vreg_pmu_wlcx_0p8: ldo2 { 435 regulator-name = "vreg_pmu_wlcx_0p8"; 436 }; 437 438 vreg_pmu_wlmx_0p8: ldo3 { 439 regulator-name = "vreg_pmu_wlmx_0p8"; 440 }; 441 442 vreg_pmu_btcmx_0p8: ldo4 { 443 regulator-name = "vreg_pmu_btcmx_0p8"; 444 }; 445 446 vreg_pmu_pcie_1p8: ldo5 { 447 regulator-name = "vreg_pmu_pcie_1p8"; 448 }; 449 450 vreg_pmu_pcie_0p9: ldo6 { 451 regulator-name = "vreg_pmu_pcie_0p9"; 452 }; 453 454 vreg_pmu_rfa_0p8: ldo7 { 455 regulator-name = "vreg_pmu_rfa_0p8"; 456 }; 457 458 vreg_pmu_rfa_1p2: ldo8 { 459 regulator-name = "vreg_pmu_rfa_1p2"; 460 }; 461 462 vreg_pmu_rfa_1p7: ldo9 { 463 regulator-name = "vreg_pmu_rfa_1p7"; 464 }; 465 }; 466 }; 467}; 468 469&apps_rsc { 470 regulators-0 { 471 compatible = "qcom,pm8350-rpmh-regulators"; 472 qcom,pmic-id = "b"; 473 474 vdd-l1-l4-supply = <&vreg_s12b>; 475 vdd-l2-l7-supply = <&vreg_bob>; 476 vdd-l3-l5-supply = <&vreg_s11b>; 477 vdd-l6-l9-l10-supply = <&vreg_s12b>; 478 vdd-l8-supply = <&vreg_s12b>; 479 480 vreg_s10b: smps10 { 481 regulator-name = "vreg_s10b"; 482 regulator-min-microvolt = <1800000>; 483 regulator-max-microvolt = <1800000>; 484 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 485 regulator-always-on; 486 }; 487 488 vreg_s11b: smps11 { 489 regulator-name = "vreg_s11b"; 490 regulator-min-microvolt = <1272000>; 491 regulator-max-microvolt = <1272000>; 492 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 493 }; 494 495 vreg_s12b: smps12 { 496 regulator-name = "vreg_s12b"; 497 regulator-min-microvolt = <984000>; 498 regulator-max-microvolt = <984000>; 499 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 500 }; 501 502 vreg_l1b: ldo1 { 503 regulator-name = "vreg_l1b"; 504 regulator-min-microvolt = <912000>; 505 regulator-max-microvolt = <912000>; 506 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 507 }; 508 509 vreg_l3b: ldo3 { 510 regulator-name = "vreg_l3b"; 511 regulator-min-microvolt = <1200000>; 512 regulator-max-microvolt = <1200000>; 513 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 514 regulator-boot-on; 515 }; 516 517 vreg_l4b: ldo4 { 518 regulator-name = "vreg_l4b"; 519 regulator-min-microvolt = <912000>; 520 regulator-max-microvolt = <912000>; 521 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 522 }; 523 524 vreg_l6b: ldo6 { 525 regulator-name = "vreg_l6b"; 526 regulator-min-microvolt = <880000>; 527 regulator-max-microvolt = <880000>; 528 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 529 regulator-boot-on; 530 }; 531 }; 532 533 regulators-1 { 534 compatible = "qcom,pm8350c-rpmh-regulators"; 535 qcom,pmic-id = "c"; 536 537 vdd-bob-supply = <&vreg_vph_pwr>; 538 vdd-l1-l12-supply = <&vreg_s1c>; 539 vdd-l2-l8-supply = <&vreg_s1c>; 540 vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; 541 vdd-l6-l9-l11-supply = <&vreg_bob>; 542 vdd-l10-supply = <&vreg_s11b>; 543 544 vreg_s1c: smps1 { 545 regulator-name = "vreg_s1c"; 546 regulator-min-microvolt = <1880000>; 547 regulator-max-microvolt = <1900000>; 548 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 549 regulator-always-on; 550 }; 551 552 vreg_l1c: ldo1 { 553 regulator-name = "vreg_l1c"; 554 regulator-min-microvolt = <1800000>; 555 regulator-max-microvolt = <1800000>; 556 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 557 }; 558 559 vreg_l8c: ldo8 { 560 regulator-name = "vreg_l8c"; 561 regulator-min-microvolt = <1800000>; 562 regulator-max-microvolt = <1800000>; 563 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 564 }; 565 566 vreg_l12c: ldo12 { 567 regulator-name = "vreg_l12c"; 568 regulator-min-microvolt = <1800000>; 569 regulator-max-microvolt = <1800000>; 570 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 571 }; 572 573 vreg_l13c: ldo13 { 574 regulator-name = "vreg_l13c"; 575 regulator-min-microvolt = <3072000>; 576 regulator-max-microvolt = <3072000>; 577 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 578 }; 579 580 vreg_bob: bob { 581 regulator-name = "vreg_bob"; 582 regulator-min-microvolt = <3008000>; 583 regulator-max-microvolt = <3960000>; 584 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; 585 regulator-always-on; 586 }; 587 }; 588 589 regulators-2 { 590 compatible = "qcom,pm8350-rpmh-regulators"; 591 qcom,pmic-id = "d"; 592 593 vdd-l1-l4-supply = <&vreg_s11b>; 594 vdd-l2-l7-supply = <&vreg_bob>; 595 vdd-l3-l5-supply = <&vreg_s11b>; 596 vdd-l6-l9-l10-supply = <&vreg_s12b>; 597 vdd-l8-supply = <&vreg_s12b>; 598 599 vreg_l2d: ldo2 { 600 regulator-name = "vreg_l2d"; 601 regulator-min-microvolt = <3072000>; 602 regulator-max-microvolt = <3072000>; 603 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 604 }; 605 606 vreg_l3d: ldo3 { 607 regulator-name = "vreg_l3d"; 608 regulator-min-microvolt = <1200000>; 609 regulator-max-microvolt = <1200000>; 610 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 611 }; 612 613 vreg_l4d: ldo4 { 614 regulator-name = "vreg_l4d"; 615 regulator-min-microvolt = <1200000>; 616 regulator-max-microvolt = <1200000>; 617 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 618 }; 619 620 vreg_l6d: ldo6 { 621 regulator-name = "vreg_l6d"; 622 regulator-min-microvolt = <880000>; 623 regulator-max-microvolt = <880000>; 624 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 625 }; 626 627 vreg_l7d: ldo7 { 628 regulator-name = "vreg_l7d"; 629 regulator-min-microvolt = <3072000>; 630 regulator-max-microvolt = <3072000>; 631 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 632 }; 633 634 vreg_l8d: ldo8 { 635 regulator-name = "vreg_l8d"; 636 regulator-min-microvolt = <912000>; 637 regulator-max-microvolt = <912000>; 638 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 639 }; 640 641 vreg_l9d: ldo9 { 642 regulator-name = "vreg_l9d"; 643 regulator-min-microvolt = <912000>; 644 regulator-max-microvolt = <912000>; 645 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 646 }; 647 648 vreg_l10d: ldo10 { 649 regulator-name = "vreg_l10d"; 650 regulator-min-microvolt = <912000>; 651 regulator-max-microvolt = <912000>; 652 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 653 }; 654 }; 655}; 656 657&camss { 658 vdda-phy-supply = <&vreg_l6d>; 659 vdda-pll-supply = <&vreg_l4d>; 660 661 status = "okay"; 662 663 ports { 664 port@0 { 665 csiphy0_lanes01_ep: endpoint@0 { 666 reg = <0>; 667 clock-lanes = <7>; 668 data-lanes = <0 1>; 669 remote-endpoint = <&ov5675_ep>; 670 }; 671 }; 672 }; 673}; 674 675&cci2 { 676 status = "okay"; 677}; 678 679&cci2_i2c1 { 680 camera@10 { 681 compatible = "ovti,ov5675"; 682 reg = <0x10>; 683 684 reset-gpios = <&tlmm 15 GPIO_ACTIVE_LOW>; 685 pinctrl-names = "default"; 686 pinctrl-0 = <&cam_rgb_default>; 687 688 clocks = <&camcc CAMCC_MCLK3_CLK>; 689 690 orientation = <0>; /* Front facing */ 691 692 avdd-supply = <&vreg_l6q>; 693 dvdd-supply = <&vreg_l2q>; 694 dovdd-supply = <&vreg_l7q>; 695 696 port { 697 ov5675_ep: endpoint { 698 data-lanes = <1 2>; 699 link-frequencies = /bits/ 64 <450000000>; 700 remote-endpoint = <&csiphy0_lanes01_ep>; 701 }; 702 }; 703 704 }; 705}; 706 707&dispcc0 { 708 status = "okay"; 709}; 710 711&gpu { 712 status = "okay"; 713 714 zap-shader { 715 memory-region = <&gpu_mem>; 716 firmware-name = "qcom/sc8280xp/LENOVO/21BX/qcdxkmsuc8280.mbn"; 717 }; 718}; 719 720&mdss0 { 721 status = "okay"; 722}; 723 724&mdss0_dp0 { 725 status = "okay"; 726}; 727 728&mdss0_dp0_out { 729 data-lanes = <0 1>; 730 remote-endpoint = <&usb_0_qmpphy_dp_in>; 731}; 732 733&mdss0_dp1 { 734 status = "okay"; 735}; 736 737&mdss0_dp1_out { 738 data-lanes = <0 1>; 739 remote-endpoint = <&usb_1_qmpphy_dp_in>; 740}; 741 742&mdss0_dp3 { 743 compatible = "qcom,sc8280xp-edp"; 744 /delete-property/ #sound-dai-cells; 745 746 data-lanes = <0 1 2 3>; 747 748 status = "okay"; 749 750 aux-bus { 751 panel { 752 compatible = "edp-panel"; 753 754 backlight = <&backlight>; 755 power-supply = <&vreg_edp_3p3>; 756 757 port { 758 edp_panel_in: endpoint { 759 remote-endpoint = <&mdss0_dp3_out>; 760 }; 761 }; 762 }; 763 }; 764 765 ports { 766 port@1 { 767 reg = <1>; 768 mdss0_dp3_out: endpoint { 769 remote-endpoint = <&edp_panel_in>; 770 }; 771 }; 772 }; 773}; 774 775&mdss0_dp3_phy { 776 compatible = "qcom,sc8280xp-edp-phy"; 777 vdda-phy-supply = <&vreg_l6b>; 778 vdda-pll-supply = <&vreg_l3b>; 779 780 status = "okay"; 781}; 782 783&i2c4 { 784 clock-frequency = <400000>; 785 786 pinctrl-names = "default"; 787 pinctrl-0 = <&i2c4_default>; 788 789 status = "okay"; 790 791 touchscreen@10 { 792 compatible = "elan,ekth5015m", "elan,ekth6915"; 793 reg = <0x10>; 794 795 interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>; 796 reset-gpios = <&tlmm 99 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; 797 no-reset-on-power-off; 798 799 vcc33-supply = <&vreg_misc_3p3>; 800 vccio-supply = <&vreg_misc_3p3>; 801 802 pinctrl-names = "default"; 803 pinctrl-0 = <&ts0_default>; 804 }; 805}; 806 807&i2c11 { 808 clock-frequency = <400000>; 809 810 pinctrl-names = "default"; 811 pinctrl-0 = <&i2c11_default>; 812 813 status = "okay"; 814 815 pm8008: pmic@c { 816 compatible = "qcom,pm8008"; 817 reg = <0xc>; 818 819 interrupts-extended = <&tlmm 41 IRQ_TYPE_EDGE_RISING>; 820 reset-gpios = <&tlmm 42 GPIO_ACTIVE_LOW>; 821 822 vdd-l1-l2-supply = <&vreg_s11b>; 823 vdd-l3-l4-supply = <&vreg_bob>; 824 vdd-l5-supply = <&vreg_bob>; 825 vdd-l6-supply = <&vreg_bob>; 826 vdd-l7-supply = <&vreg_bob>; 827 828 pinctrl-names = "default"; 829 pinctrl-0 = <&pm8008_default>; 830 831 gpio-controller; 832 #gpio-cells = <2>; 833 gpio-ranges = <&pm8008 0 0 2>; 834 835 interrupt-controller; 836 #interrupt-cells = <2>; 837 838 #thermal-sensor-cells = <0>; 839 840 regulators { 841 vreg_l1q: ldo1 { 842 regulator-name = "vreg_l1q"; 843 regulator-min-microvolt = <1200000>; 844 regulator-max-microvolt = <1200000>; 845 }; 846 847 vreg_l2q: ldo2 { 848 regulator-name = "vreg_l2q"; 849 regulator-min-microvolt = <1200000>; 850 regulator-max-microvolt = <1200000>; 851 }; 852 853 vreg_l3q: ldo3 { 854 regulator-name = "vreg_l3q"; 855 regulator-min-microvolt = <2800000>; 856 regulator-max-microvolt = <2800000>; 857 }; 858 859 vreg_l4q: ldo4 { 860 regulator-name = "vreg_l4q"; 861 regulator-min-microvolt = <2800000>; 862 regulator-max-microvolt = <2800000>; 863 }; 864 865 vreg_l5q: ldo5 { 866 regulator-name = "vreg_l5q"; 867 regulator-min-microvolt = <1800000>; 868 regulator-max-microvolt = <1800000>; 869 }; 870 871 vreg_l6q: ldo6 { 872 regulator-name = "vreg_l6q"; 873 regulator-min-microvolt = <1800000>; 874 regulator-max-microvolt = <1800000>; 875 }; 876 877 vreg_l7q: ldo7 { 878 regulator-name = "vreg_l7q"; 879 regulator-min-microvolt = <2800000>; 880 regulator-max-microvolt = <2800000>; 881 }; 882 }; 883 }; 884}; 885 886&i2c21 { 887 clock-frequency = <400000>; 888 889 pinctrl-names = "default"; 890 pinctrl-0 = <&i2c21_default>, <&tpad_default>; 891 892 status = "okay"; 893 894 touchpad@15 { 895 compatible = "hid-over-i2c"; 896 reg = <0x15>; 897 898 hid-descr-addr = <0x1>; 899 interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; 900 vdd-supply = <&vreg_misc_3p3>; 901 vddl-supply = <&vreg_s10b>; 902 903 wakeup-source; 904 }; 905 906 touchpad@2c { 907 compatible = "hid-over-i2c"; 908 reg = <0x2c>; 909 910 hid-descr-addr = <0x20>; 911 interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; 912 vdd-supply = <&vreg_misc_3p3>; 913 vddl-supply = <&vreg_s10b>; 914 915 wakeup-source; 916 }; 917 918 keyboard@68 { 919 compatible = "hid-over-i2c"; 920 reg = <0x68>; 921 922 hid-descr-addr = <0x1>; 923 interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; 924 vdd-supply = <&vreg_misc_3p3>; 925 vddl-supply = <&vreg_s10b>; 926 927 pinctrl-names = "default"; 928 pinctrl-0 = <&kybd_default>; 929 930 wakeup-source; 931 }; 932}; 933 934&pcie2a { 935 perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; 936 wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; 937 938 vddpe-3v3-supply = <&vreg_nvme>; 939 940 pinctrl-names = "default"; 941 pinctrl-0 = <&pcie2a_default>; 942 943 status = "okay"; 944}; 945 946&pcie2a_phy { 947 vdda-phy-supply = <&vreg_l6d>; 948 vdda-pll-supply = <&vreg_l4d>; 949 950 status = "okay"; 951}; 952 953&pcie3a { 954 perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>; 955 wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; 956 957 vddpe-3v3-supply = <&vreg_wwan>; 958 959 pinctrl-names = "default"; 960 pinctrl-0 = <&pcie3a_default>; 961 962 status = "okay"; 963}; 964 965&pcie3a_phy { 966 vdda-phy-supply = <&vreg_l6d>; 967 vdda-pll-supply = <&vreg_l4d>; 968 969 status = "okay"; 970}; 971 972&pcie4 { 973 max-link-speed = <2>; 974 975 perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>; 976 wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>; 977 978 vddpe-3v3-supply = <&vreg_wlan>; 979 980 pinctrl-names = "default"; 981 pinctrl-0 = <&pcie4_default>; 982 983 status = "okay"; 984}; 985 986&pcie4_port0 { 987 wifi@0 { 988 compatible = "pci17cb,1103"; 989 reg = <0x10000 0x0 0x0 0x0 0x0>; 990 991 vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>; 992 vddaon-supply = <&vreg_pmu_aon_0p8>; 993 vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; 994 vddwlmx-supply = <&vreg_pmu_wlmx_0p8>; 995 vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; 996 vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; 997 vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; 998 vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; 999 vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; 1000 1001 qcom,ath11k-calibration-variant = "LE_X13S"; 1002 }; 1003}; 1004 1005&pcie4_phy { 1006 vdda-phy-supply = <&vreg_l6d>; 1007 vdda-pll-supply = <&vreg_l4d>; 1008 1009 status = "okay"; 1010}; 1011 1012&pmc8280c_lpg { 1013 status = "okay"; 1014}; 1015 1016&pmk8280_adc_tm { 1017 status = "okay"; 1018 1019 sys-therm@0 { 1020 reg = <0>; 1021 io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(1)>; 1022 qcom,hw-settle-time-us = <200>; 1023 qcom,avg-samples = <2>; 1024 qcom,ratiometric; 1025 }; 1026 1027 sys-therm@1 { 1028 reg = <1>; 1029 io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(1)>; 1030 qcom,hw-settle-time-us = <200>; 1031 qcom,avg-samples = <2>; 1032 qcom,ratiometric; 1033 }; 1034 1035 sys-therm@2 { 1036 reg = <2>; 1037 io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(1)>; 1038 qcom,hw-settle-time-us = <200>; 1039 qcom,avg-samples = <2>; 1040 qcom,ratiometric; 1041 }; 1042 1043 sys-therm@3 { 1044 reg = <3>; 1045 io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>; 1046 qcom,hw-settle-time-us = <200>; 1047 qcom,avg-samples = <2>; 1048 qcom,ratiometric; 1049 }; 1050 1051 sys-therm@4 { 1052 reg = <4>; 1053 io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(3)>; 1054 qcom,hw-settle-time-us = <200>; 1055 qcom,avg-samples = <2>; 1056 qcom,ratiometric; 1057 }; 1058 1059 sys-therm@5 { 1060 reg = <5>; 1061 io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(3)>; 1062 qcom,hw-settle-time-us = <200>; 1063 qcom,avg-samples = <2>; 1064 qcom,ratiometric; 1065 }; 1066 1067 sys-therm@6 { 1068 reg = <6>; 1069 io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(3)>; 1070 qcom,hw-settle-time-us = <200>; 1071 qcom,avg-samples = <2>; 1072 qcom,ratiometric; 1073 }; 1074 1075 sys-therm@7 { 1076 reg = <7>; 1077 io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(3)>; 1078 qcom,hw-settle-time-us = <200>; 1079 qcom,avg-samples = <2>; 1080 qcom,ratiometric; 1081 }; 1082}; 1083 1084&pmk8280_pon_pwrkey { 1085 status = "okay"; 1086}; 1087 1088&pmk8280_pon_resin { 1089 status = "okay"; 1090}; 1091 1092&pmk8280_rtc { 1093 nvmem-cells = <&rtc_offset>; 1094 nvmem-cell-names = "offset"; 1095 1096 status = "okay"; 1097}; 1098 1099&pmk8280_sdam_6 { 1100 status = "okay"; 1101 1102 rtc_offset: rtc-offset@bc { 1103 reg = <0xbc 0x4>; 1104 }; 1105}; 1106 1107&pmk8280_vadc { 1108 channel@144 { 1109 reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>; 1110 qcom,hw-settle-time = <200>; 1111 qcom,ratiometric; 1112 label = "sys_therm1"; 1113 }; 1114 1115 channel@145 { 1116 reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>; 1117 qcom,hw-settle-time = <200>; 1118 qcom,ratiometric; 1119 label = "sys_therm2"; 1120 }; 1121 1122 channel@146 { 1123 reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>; 1124 qcom,hw-settle-time = <200>; 1125 qcom,ratiometric; 1126 label = "sys_therm3"; 1127 }; 1128 1129 channel@147 { 1130 reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>; 1131 qcom,hw-settle-time = <200>; 1132 qcom,ratiometric; 1133 label = "sys_therm4"; 1134 }; 1135 1136 channel@344 { 1137 reg = <PM8350_ADC7_AMUX_THM1_100K_PU(3)>; 1138 qcom,hw-settle-time = <200>; 1139 qcom,ratiometric; 1140 label = "sys_therm5"; 1141 }; 1142 1143 channel@345 { 1144 reg = <PM8350_ADC7_AMUX_THM2_100K_PU(3)>; 1145 qcom,hw-settle-time = <200>; 1146 qcom,ratiometric; 1147 label = "sys_therm6"; 1148 }; 1149 1150 channel@346 { 1151 reg = <PM8350_ADC7_AMUX_THM3_100K_PU(3)>; 1152 qcom,hw-settle-time = <200>; 1153 qcom,ratiometric; 1154 label = "sys_therm7"; 1155 }; 1156 1157 channel@347 { 1158 reg = <PM8350_ADC7_AMUX_THM4_100K_PU(3)>; 1159 qcom,hw-settle-time = <200>; 1160 qcom,ratiometric; 1161 label = "sys_therm8"; 1162 }; 1163}; 1164 1165&qup0 { 1166 status = "okay"; 1167}; 1168 1169&qup1 { 1170 status = "okay"; 1171}; 1172 1173&qup2 { 1174 status = "okay"; 1175}; 1176 1177&remoteproc_adsp { 1178 firmware-name = "qcom/sc8280xp/LENOVO/21BX/qcadsp8280.mbn"; 1179 1180 status = "okay"; 1181}; 1182 1183&remoteproc_nsp0 { 1184 firmware-name = "qcom/sc8280xp/LENOVO/21BX/qccdsp8280.mbn"; 1185 1186 status = "okay"; 1187}; 1188 1189&rxmacro { 1190 status = "okay"; 1191}; 1192 1193&sound { 1194 compatible = "qcom,sc8280xp-sndcard"; 1195 model = "SC8280XP-LENOVO-X13S"; 1196 audio-routing = 1197 "SpkrLeft IN", "WSA_SPK1 OUT", 1198 "SpkrRight IN", "WSA_SPK2 OUT", 1199 "IN1_HPHL", "HPHL_OUT", 1200 "IN2_HPHR", "HPHR_OUT", 1201 "AMIC2", "MIC BIAS2", 1202 "VA DMIC0", "MIC BIAS1", 1203 "VA DMIC1", "MIC BIAS1", 1204 "VA DMIC2", "MIC BIAS3", 1205 "VA DMIC0", "VA MIC BIAS1", 1206 "VA DMIC1", "VA MIC BIAS1", 1207 "VA DMIC2", "VA MIC BIAS3", 1208 "TX SWR_ADC1", "ADC2_OUTPUT"; 1209 1210 wcd-playback-dai-link { 1211 link-name = "WCD Playback"; 1212 cpu { 1213 sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; 1214 }; 1215 1216 codec { 1217 sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>; 1218 }; 1219 1220 platform { 1221 sound-dai = <&q6apm>; 1222 }; 1223 }; 1224 1225 wcd-capture-dai-link { 1226 link-name = "WCD Capture"; 1227 cpu { 1228 sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; 1229 }; 1230 1231 codec { 1232 sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>; 1233 }; 1234 1235 platform { 1236 sound-dai = <&q6apm>; 1237 }; 1238 }; 1239 1240 wsa-dai-link { 1241 link-name = "WSA Playback"; 1242 cpu { 1243 sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; 1244 }; 1245 1246 codec { 1247 sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>; 1248 }; 1249 1250 platform { 1251 sound-dai = <&q6apm>; 1252 }; 1253 }; 1254 1255 va-dai-link { 1256 link-name = "VA Capture"; 1257 cpu { 1258 sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; 1259 }; 1260 1261 platform { 1262 sound-dai = <&q6apm>; 1263 }; 1264 1265 codec { 1266 sound-dai = <&vamacro 0>; 1267 }; 1268 }; 1269}; 1270 1271&swr0 { 1272 status = "okay"; 1273 1274 left_spkr: wsa8830-left@0,1 { 1275 compatible = "sdw10217020200"; 1276 reg = <0 1>; 1277 pinctrl-names = "default"; 1278 pinctrl-0 = <&spkr_1_sd_n_default>; 1279 powerdown-gpios = <&tlmm 178 GPIO_ACTIVE_LOW>; 1280 #thermal-sensor-cells = <0>; 1281 sound-name-prefix = "SpkrLeft"; 1282 #sound-dai-cells = <0>; 1283 vdd-supply = <&vreg_s10b>; 1284 }; 1285 1286 right_spkr: wsa8830-right@0,2 { 1287 compatible = "sdw10217020200"; 1288 reg = <0 2>; 1289 pinctrl-names = "default"; 1290 pinctrl-0 = <&spkr_2_sd_n_default>; 1291 powerdown-gpios = <&tlmm 179 GPIO_ACTIVE_LOW>; 1292 #thermal-sensor-cells = <0>; 1293 sound-name-prefix = "SpkrRight"; 1294 #sound-dai-cells = <0>; 1295 vdd-supply = <&vreg_s10b>; 1296 }; 1297}; 1298 1299&swr1 { 1300 status = "okay"; 1301 1302 wcd_rx: wcd9380-rx@0,4 { 1303 compatible = "sdw20217010d00"; 1304 reg = <0 4>; 1305 qcom,rx-port-mapping = <1 2 3 4 5>; 1306 }; 1307}; 1308 1309&swr2 { 1310 status = "okay"; 1311 1312 wcd_tx: wcd9380-tx@0,3 { 1313 compatible = "sdw20217010d00"; 1314 reg = <0 3>; 1315 qcom,tx-port-mapping = <1 1 2 3>; 1316 }; 1317}; 1318 1319&txmacro { 1320 status = "okay"; 1321}; 1322 1323&uart2 { 1324 pinctrl-0 = <&uart2_default>; 1325 pinctrl-names = "default"; 1326 1327 status = "okay"; 1328 1329 bluetooth { 1330 compatible = "qcom,wcn6855-bt"; 1331 1332 vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>; 1333 vddaon-supply = <&vreg_pmu_aon_0p8>; 1334 vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; 1335 vddwlmx-supply = <&vreg_pmu_wlmx_0p8>; 1336 vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>; 1337 vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; 1338 vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; 1339 vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; 1340 1341 max-speed = <3200000>; 1342 }; 1343}; 1344 1345&usb_0 { 1346 status = "okay"; 1347}; 1348 1349&usb_0_dwc3 { 1350 dr_mode = "host"; 1351}; 1352 1353&usb_0_dwc3_hs { 1354 remote-endpoint = <&pmic_glink_con0_hs>; 1355}; 1356 1357&usb_0_hsphy { 1358 vdda-pll-supply = <&vreg_l9d>; 1359 vdda18-supply = <&vreg_l1c>; 1360 vdda33-supply = <&vreg_l7d>; 1361 1362 status = "okay"; 1363}; 1364 1365&usb_0_qmpphy { 1366 vdda-phy-supply = <&vreg_l9d>; 1367 vdda-pll-supply = <&vreg_l4d>; 1368 1369 orientation-switch; 1370 1371 status = "okay"; 1372}; 1373 1374&usb_0_qmpphy_dp_in { 1375 remote-endpoint = <&mdss0_dp0_out>; 1376}; 1377 1378&usb_0_qmpphy_out { 1379 remote-endpoint = <&pmic_glink_con0_ss>; 1380}; 1381 1382&usb_1 { 1383 status = "okay"; 1384}; 1385 1386&usb_1_dwc3 { 1387 dr_mode = "host"; 1388}; 1389 1390&usb_1_dwc3_hs { 1391 remote-endpoint = <&pmic_glink_con1_hs>; 1392}; 1393 1394&usb_1_hsphy { 1395 vdda-pll-supply = <&vreg_l4b>; 1396 vdda18-supply = <&vreg_l1c>; 1397 vdda33-supply = <&vreg_l13c>; 1398 1399 status = "okay"; 1400}; 1401 1402&usb_1_qmpphy { 1403 vdda-phy-supply = <&vreg_l4b>; 1404 vdda-pll-supply = <&vreg_l3b>; 1405 1406 orientation-switch; 1407 1408 status = "okay"; 1409}; 1410 1411&usb_1_qmpphy_dp_in { 1412 remote-endpoint = <&mdss0_dp1_out>; 1413}; 1414 1415&usb_1_qmpphy_out { 1416 remote-endpoint = <&pmic_glink_con1_ss>; 1417}; 1418 1419&usb_2 { 1420 status = "okay"; 1421}; 1422 1423&usb_2_hsphy0 { 1424 vdda-pll-supply = <&vreg_l1b>; 1425 vdda18-supply = <&vreg_l1c>; 1426 vdda33-supply = <&vreg_l7d>; 1427 1428 status = "okay"; 1429}; 1430 1431&usb_2_hsphy1 { 1432 vdda-pll-supply = <&vreg_l8d>; 1433 vdda18-supply = <&vreg_l1c>; 1434 vdda33-supply = <&vreg_l7d>; 1435 1436 status = "okay"; 1437}; 1438 1439&usb_2_hsphy2 { 1440 vdda-pll-supply = <&vreg_l10d>; 1441 vdda18-supply = <&vreg_l8c>; 1442 vdda33-supply = <&vreg_l2d>; 1443 1444 status = "okay"; 1445}; 1446 1447&usb_2_hsphy3 { 1448 vdda-pll-supply = <&vreg_l10d>; 1449 vdda18-supply = <&vreg_l8c>; 1450 vdda33-supply = <&vreg_l2d>; 1451 1452 status = "okay"; 1453}; 1454 1455&usb_2_qmpphy0 { 1456 vdda-phy-supply = <&vreg_l1b>; 1457 vdda-pll-supply = <&vreg_l4d>; 1458 1459 status = "okay"; 1460}; 1461 1462&usb_2_qmpphy1 { 1463 vdda-phy-supply = <&vreg_l8d>; 1464 vdda-pll-supply = <&vreg_l4d>; 1465 1466 status = "okay"; 1467}; 1468 1469&vamacro { 1470 pinctrl-0 = <&dmic01_default>, <&dmic23_default>; 1471 pinctrl-names = "default"; 1472 1473 vdd-micb-supply = <&vreg_s10b>; 1474 1475 qcom,dmic-sample-rate = <4800000>; 1476 1477 status = "okay"; 1478}; 1479 1480&wsamacro { 1481 status = "okay"; 1482}; 1483 1484&xo_board_clk { 1485 clock-frequency = <38400000>; 1486}; 1487 1488/* PINCTRL */ 1489 1490&lpass_tlmm { 1491 status = "okay"; 1492}; 1493 1494&pmc8280_1_gpios { 1495 edp_bl_en: edp-bl-en-state { 1496 pins = "gpio8"; 1497 function = "normal"; 1498 }; 1499 1500 edp_bl_reg_en: edp-bl-reg-en-state { 1501 pins = "gpio9"; 1502 function = "normal"; 1503 }; 1504 1505 misc_3p3_reg_en: misc-3p3-reg-en-state { 1506 pins = "gpio1"; 1507 function = "normal"; 1508 }; 1509}; 1510 1511&pmc8280_2_gpios { 1512 wwan_sw_en: wwan-sw-en-state { 1513 pins = "gpio1"; 1514 function = "normal"; 1515 }; 1516}; 1517 1518&pmc8280c_gpios { 1519 edp_bl_pwm: edp-bl-pwm-state { 1520 pins = "gpio8"; 1521 function = "func1"; 1522 }; 1523}; 1524 1525&pmr735a_gpios { 1526 hastings_reg_en: hastings-reg-en-state { 1527 pins = "gpio1"; 1528 function = "normal"; 1529 }; 1530}; 1531 1532&tlmm { 1533 gpio-reserved-ranges = <70 2>, <74 6>, <125 2>, <128 2>, <154 4>; 1534 1535 bt_default: bt-default-state { 1536 hstp-bt-en-pins { 1537 pins = "gpio133"; 1538 function = "gpio"; 1539 drive-strength = <16>; 1540 bias-disable; 1541 }; 1542 1543 hstp-sw-ctrl-pins { 1544 pins = "gpio132"; 1545 function = "gpio"; 1546 bias-pull-down; 1547 }; 1548 }; 1549 1550 cam_indicator_en: cam-indicator-en-state { 1551 pins = "gpio28"; 1552 function = "gpio"; 1553 drive-strength = <2>; 1554 bias-disable; 1555 }; 1556 1557 cam_rgb_default: cam-rgb-default-state { 1558 mclk-pins { 1559 pins = "gpio17"; 1560 function = "cam_mclk"; 1561 drive-strength = <16>; 1562 bias-disable; 1563 }; 1564 1565 sc-rgb-xshut-n-pins { 1566 pins = "gpio15"; 1567 function = "gpio"; 1568 drive-strength = <2>; 1569 bias-disable; 1570 }; 1571 }; 1572 1573 edp_reg_en: edp-reg-en-state { 1574 pins = "gpio25"; 1575 function = "gpio"; 1576 drive-strength = <16>; 1577 bias-disable; 1578 }; 1579 1580 hall_int_n_default: hall-int-n-state { 1581 pins = "gpio107"; 1582 function = "gpio"; 1583 bias-disable; 1584 }; 1585 1586 i2c4_default: i2c4-default-state { 1587 pins = "gpio171", "gpio172"; 1588 function = "qup4"; 1589 drive-strength = <16>; 1590 bias-disable; 1591 }; 1592 1593 i2c11_default: i2c11-default-state { 1594 pins = "gpio18", "gpio19"; 1595 function = "qup11"; 1596 drive-strength = <16>; 1597 bias-disable; 1598 }; 1599 1600 i2c21_default: i2c21-default-state { 1601 pins = "gpio81", "gpio82"; 1602 function = "qup21"; 1603 drive-strength = <16>; 1604 bias-disable; 1605 }; 1606 1607 kybd_default: kybd-default-state { 1608 disable-pins { 1609 pins = "gpio102"; 1610 function = "gpio"; 1611 output-low; 1612 }; 1613 1614 int-n-pins { 1615 pins = "gpio104"; 1616 function = "gpio"; 1617 bias-disable; 1618 }; 1619 1620 reset-pins { 1621 pins = "gpio105"; 1622 function = "gpio"; 1623 bias-disable; 1624 }; 1625 }; 1626 1627 nvme_reg_en: nvme-reg-en-state { 1628 pins = "gpio135"; 1629 function = "gpio"; 1630 drive-strength = <2>; 1631 bias-disable; 1632 }; 1633 1634 pcie2a_default: pcie2a-default-state { 1635 clkreq-n-pins { 1636 pins = "gpio142"; 1637 function = "pcie2a_clkreq"; 1638 drive-strength = <2>; 1639 bias-pull-up; 1640 }; 1641 1642 perst-n-pins { 1643 pins = "gpio143"; 1644 function = "gpio"; 1645 drive-strength = <2>; 1646 bias-disable; 1647 }; 1648 1649 wake-n-pins { 1650 pins = "gpio145"; 1651 function = "gpio"; 1652 drive-strength = <2>; 1653 bias-pull-up; 1654 }; 1655 }; 1656 1657 pcie3a_default: pcie3a-default-state { 1658 clkreq-n-pins { 1659 pins = "gpio150"; 1660 function = "pcie3a_clkreq"; 1661 drive-strength = <2>; 1662 bias-pull-up; 1663 }; 1664 1665 perst-n-pins { 1666 pins = "gpio151"; 1667 function = "gpio"; 1668 drive-strength = <2>; 1669 bias-disable; 1670 }; 1671 1672 wake-n-pins { 1673 pins = "gpio148"; 1674 function = "gpio"; 1675 drive-strength = <2>; 1676 bias-pull-up; 1677 }; 1678 }; 1679 1680 pcie4_default: pcie4-default-state { 1681 clkreq-n-pins { 1682 pins = "gpio140"; 1683 function = "pcie4_clkreq"; 1684 drive-strength = <2>; 1685 bias-pull-up; 1686 }; 1687 1688 perst-n-pins { 1689 pins = "gpio141"; 1690 function = "gpio"; 1691 drive-strength = <2>; 1692 bias-disable; 1693 }; 1694 1695 wake-n-pins { 1696 pins = "gpio139"; 1697 function = "gpio"; 1698 drive-strength = <2>; 1699 bias-pull-up; 1700 }; 1701 }; 1702 1703 pm8008_default: pm8008-default-state { 1704 int-pins { 1705 pins = "gpio41"; 1706 function = "gpio"; 1707 drive-strength = <2>; 1708 bias-pull-down; 1709 }; 1710 1711 reset-n-pins { 1712 pins = "gpio42"; 1713 function = "gpio"; 1714 drive-strength = <2>; 1715 bias-disable; 1716 }; 1717 }; 1718 1719 spkr_1_sd_n_default: spkr-1-sd-n-default-state { 1720 perst-n-pins { 1721 pins = "gpio178"; 1722 function = "gpio"; 1723 drive-strength = <16>; 1724 bias-disable; 1725 output-high; 1726 }; 1727 }; 1728 1729 spkr_2_sd_n_default: spkr-2-sd-n-default-state { 1730 perst-n-pins { 1731 pins = "gpio179"; 1732 function = "gpio"; 1733 drive-strength = <16>; 1734 bias-disable; 1735 output-high; 1736 }; 1737 }; 1738 1739 tpad_default: tpad-default-state { 1740 int-n-pins { 1741 pins = "gpio182"; 1742 function = "gpio"; 1743 bias-disable; 1744 }; 1745 }; 1746 1747 ts0_default: ts0-default-state { 1748 int-n-pins { 1749 pins = "gpio175"; 1750 function = "gpio"; 1751 bias-disable; 1752 }; 1753 1754 reset-n-pins { 1755 pins = "gpio99"; 1756 function = "gpio"; 1757 drive-strength = <2>; 1758 bias-disable; 1759 }; 1760 }; 1761 1762 uart2_default: uart2-default-state { 1763 cts-pins { 1764 pins = "gpio121"; 1765 function = "qup2"; 1766 bias-bus-hold; 1767 }; 1768 1769 rts-pins { 1770 pins = "gpio122"; 1771 function = "qup2"; 1772 drive-strength = <2>; 1773 bias-disable; 1774 }; 1775 1776 rx-pins { 1777 pins = "gpio124"; 1778 function = "qup2"; 1779 bias-pull-up; 1780 }; 1781 1782 tx-pins { 1783 pins = "gpio123"; 1784 function = "qup2"; 1785 drive-strength = <2>; 1786 bias-disable; 1787 }; 1788 }; 1789 1790 usb0_sbu_default: usb0-sbu-state { 1791 oe-n-pins { 1792 pins = "gpio101"; 1793 function = "gpio"; 1794 bias-disable; 1795 drive-strength = <16>; 1796 output-high; 1797 }; 1798 1799 sel-pins { 1800 pins = "gpio164"; 1801 function = "gpio"; 1802 bias-disable; 1803 drive-strength = <16>; 1804 }; 1805 }; 1806 1807 usb1_sbu_default: usb1-sbu-state { 1808 oe-n-pins { 1809 pins = "gpio48"; 1810 function = "gpio"; 1811 bias-disable; 1812 drive-strength = <16>; 1813 output-high; 1814 }; 1815 1816 sel-pins { 1817 pins = "gpio47"; 1818 function = "gpio"; 1819 bias-disable; 1820 drive-strength = <16>; 1821 }; 1822 }; 1823 1824 wcd_default: wcd-default-state { 1825 reset-pins { 1826 pins = "gpio106"; 1827 function = "gpio"; 1828 bias-disable; 1829 }; 1830 }; 1831 1832 wlan_en: wlan-en-state { 1833 pins = "gpio134"; 1834 function = "gpio"; 1835 drive-strength = <8>; 1836 bias-pull-down; 1837 }; 1838}; 1839