| /linux/arch/mips/pci/ |
| H A D | fixup-sni.c | 25 #define INTB PCIMT_IRQ_INTB macro
33 * Device 3: VGA (routed to INTB)
44 /* INTA INTB INTC INTD */
48 { INTB, INTB, INTB, INTB, INTB }, /* VGA */
50 { 0, INTB, INTC, INTD, INTA }, /* Slot 2 */
51 { 0, INTC, INTD, INTA, INTB }, /* Slot 3 */
52 { 0, INTD, INTA, INTB, INTC }, /* Slot 4 */
61 /* INTA INTB INTC INTD */
64 { 0, INTC, INTD, INTA, INTB }, /* Slot 1 */
65 { INTB, INTB, INTB, INTB, INTB }, /* VGA */
[all …]
|
| H A D | fixup-ip32.c | 22 #define INTB MACEPCI_SHARED0_IRQ macro
30 {0, INTA0, INTB, INTC, INTD},
31 {0, INTA1, INTC, INTD, INTB},
32 {0, INTA2, INTD, INTB, INTC},
|
| /linux/include/linux/mfd/ |
| H A D | rohm-bd96801.h | 36 * The BD96801 has two physical IRQ lines, INTB and ERRB.
40 * INTB status registers are at range 0x5c ... 0x63
144 /* INTB IRQs */
146 /* Reg 0x5c (System INTB) */
152 /* Reg 0x5d (BUCK1 INTB) */
160 /* Reg 0x5e (BUCK2 INTB) */
168 /* Reg 0x5f (BUCK3 INTB)*/
176 /* Reg 0x60 (BUCK4 INTB)*/
184 /* Reg 0x61 (LDO5 INTB) */
189 /* Reg 0x62 (LDO6 INTB) */
[all …]
|
| H A D | rohm-bd96802.h | 49 /* INTB IRQs */
51 /* Reg 0x5c (System INTB) */
57 /* Reg 0x5d (BUCK1 INTB) */
65 /* Reg 0x5e (BUCK2 INTB) */
|
| H A D | si476x-platform.h | 138 enum si476x_intb_config intb; member
195 * INTB is the interrupt pin
|
| /linux/drivers/mfd/ |
| H A D | rohm-bd96801.c | 274 * in one of the first 3 sub IRQ registers, For INTB we can use default 1 to 1
322 /* 0x54 Fatal INTB shadowed to ERRB */
382 /* 0x54 Fatal INTB shadowed to ERRB */
397 /* STATUS SYSTEM INTB */
402 /* STATUS BUCK1 INTB */
409 /* BUCK 2 INTB */
416 /* BUCK 3 INTB */
423 /* BUCK 4 INTB */
430 /* LDO5 INTB */
434 /* LDO6 INTB */
[all …]
|
| H A D | si476x-cmd.c | 679 * @intb: - INTB pin function configuration:
695 enum si476x_intb_config intb, in si476x_core_cmd_intb_pin_cfg_a10() argument
700 PIN_CFG_BYTE(intb), in si476x_core_cmd_intb_pin_cfg_a10()
711 enum si476x_intb_config intb, in si476x_core_cmd_intb_pin_cfg_a20() argument
716 PIN_CFG_BYTE(intb), in si476x_core_cmd_intb_pin_cfg_a20()
1441 enum si476x_intb_config intb,
1532 enum si476x_intb_config intb, in si476x_core_cmd_intb_pin_cfg() argument
1538 return si476x_cmds_vtable[core->revision].intb_pin_cfg(core, intb, a1); in si476x_core_cmd_intb_pin_cfg()
|
| /linux/arch/sh/boards/mach-se/7780/ |
| H A D | irq.c | 54 * INTA || INTA | INTD | -- | INTB in init_se7780_IRQ()
56 * INTB || INTB | INTA | -- | INTC in init_se7780_IRQ()
58 * INTC || INTC | INTB | INTA | -- in init_se7780_IRQ()
|
| /linux/Documentation/devicetree/bindings/mfd/ |
| H A D | rohm,bd96801-pmic.yaml | 28 The PMIC provides intb and errb IRQ lines. The errb IRQ line is used
41 - enum: [intb, errb]
55 just toggle the INTB line.
58 - intb-only
89 interrupt-names = "intb", "errb";
|
| H A D | rohm,bd96802-pmic.yaml | 28 The PMIC provides intb and errb IRQ lines. The errb IRQ line is used
41 - enum: [intb, errb]
70 interrupt-names = "intb", "errb";
|
| /linux/arch/alpha/kernel/ |
| H A D | sys_rx164.c | 118 * Slot IDSEL INTA INTB INTC INTD
126 * Slot IDSEL INTA INTB INTC INTD
151 /*INT INTA INTB INTC INTD */ in rx164_map_irq()
161 /*INT INTA INTB INTC INTD */ in rx164_map_irq()
|
| H A D | sys_ruffian.c | 104 * IdSel INTA INTB INTC INTD
111 * IdSel INTA INTB INTC INTD
125 /*INT INTA INTB INTC INTD */ in ruffian_map_irq()
|
| H A D | sys_dp264.c | 379 /*INT INTA INTB INTC INTD */ in dp264_map_irq()
401 /*INT INTA INTB INTC INTD */ in monet_map_irq()
463 /*INT INTA INTB INTC INTD */ in webbrick_map_irq()
485 /*INT INTA INTB INTC INTD */ in clipper_map_irq()
|
| H A D | sys_cabriolet.c | 178 /*INT INTA INTB INTC INTD */ in eb66p_map_irq()
208 /*INT INTA INTB INTC INTD */ in cabriolet_map_irq()
285 /*INT INTA INTB INTC INTD */ in alphapc164_map_irq()
|
| /linux/drivers/pcmcia/ |
| H A D | ti113x.h | 501 * ties INTA and INTB together. also changes the devices irq to that of
537 * irqrouting for func1, plays with INTB routing
538 * only touches MFUNC for INTB routing. all other bits are taken
586 /* parallel PCI: route INTB, probe again */ in ti12xx_irqroute_func1()
592 /* the 1250 has one pin for IRQSER/INTB depending on devctl */ in ti12xx_irqroute_func1()
599 * those have a pin for IRQSER/INTB plus INTB in MFUNC0 in ti12xx_irqroute_func1()
820 /* those have INTA elsewhere and INTB in MFUNC0 */ in ti12xx_power_hook()
|
| /linux/Documentation/devicetree/bindings/pci/ |
| H A D | sifive,fu740-pcie.yaml | 46 - const: intb
107 interrupt-names = "msi", "inta", "intb", "intc", "intd";
|
| H A D | rockchip-dw-pcie-common.yaml | 60 interrupts - inta, intb, intc, intd, tx_inta, tx_intb, tx_intc,
|
| /linux/include/linux/ssb/ |
| H A D | ssb_driver_pci.h | 28 #define SSB_PCICORE_ISTAT_INTB 0x00000002 /* PCI INTB# */
34 #define SSB_PCICORE_IMASK_INTB 0x00000002 /* PCI INTB# */
|
| /linux/Documentation/arch/x86/i386/ |
| H A D | IO-APIC.rst | 65 Every PCI card emits a PCI IRQ, which can be INTA, INTB, INTC or INTD::
72 INTB--|t|
|
| /linux/Documentation/PCI/endpoint/function/binding/ |
| H A D | pci-test.rst | 21 interrupt_pin Should be 1 - INTA, 2 - INTB, 3 - INTC, 4 -INTD
|
| /linux/drivers/pci/ |
| H A D | irq.c | 85 * @pin: the INTx pin (1=INTA, 2=INTB, 3=INTC, 4=INTD)
124 * @pinp: pointer to the INTx pin value (1=INTA, 2=INTB, 3=INTD, 4=INTD)
|
| /linux/Documentation/devicetree/bindings/extcon/ |
| H A D | extcon-ptn5150.yaml | 25 GPIO pin (input) connected to the PTN5150's INTB pin.
|
| /linux/arch/sh/include/mach-landisk/mach/ |
| H A D | iodata_landisk.h | 31 #define IRQ_PCIINTB evt2irq(0x2c0) /* PCI INTB IRQ */
|
| /linux/arch/sh/drivers/pci/ |
| H A D | fixups-sdk7780.c | 26 /* INTB */
|
| /linux/include/linux/bcma/ |
| H A D | bcma_driver_pci.h | 25 #define BCMA_CORE_PCI_ISTAT_INTB 0x00000002 /* PCI INTB# */
31 #define BCMA_CORE_PCI_IMASK_INTB 0x00000002 /* PCI INTB# */
|