| /linux/Documentation/leds/ |
| H A D | leds-mlxcpld.rst | 16 - mlxcpld:fan2:green
17 - mlxcpld:fan2:red
39 "fan2"
|
| /linux/arch/arm/boot/dts/aspeed/ |
| H A D | aspeed-bmc-ufispace-ncplite.dts | 123 fan2-presence {
124 label = "fan2-presence";
276 "","","presence-fan2","",
|
| H A D | aspeed-bmc-opp-mowgli.dts | 96 event-fan2-presence {
97 label = "fan2-presence";
148 fan2 {
|
| H A D | aspeed-bmc-opp-witherspoon.dts | 100 event-fan2-presence {
101 label = "fan2-presence";
128 fan2 {
|
| H A D | aspeed-bmc-opp-swift.dts | 123 event-fan2-presence {
124 label = "fan2-presence";
157 fan2 {
|
| H A D | aspeed-bmc-ibm-rainier.dts | 148 event-fan2-presence {
149 label = "fan2-presence";
1094 fan2: fan@2 { label
1187 label = "fan2";
|
| H A D | aspeed-bmc-opp-tacoma.dts | 82 event-fan2-presence {
83 label = "fan2-presence";
|
| H A D | aspeed-bmc-inspur-fp5280g2.dts | 112 event-fan2-presence {
113 label = "fan2-presence";
|
| /linux/Documentation/hwmon/ |
| H A D | w83795.rst | 62 42 FANIN2 2Fh fan2
118 34 FANIN2 2Fh fan2
|
| H A D | asb100.rst | 55 - 0x0080 => fan2
|
| H A D | lm87.rst | 85 - fan2 (default) or in7
|
| H A D | bel-pfe.rst | 111 - curr3, fan2, vout[2-7], vcap, pin2, pout2 and temp3 attributes only
|
| H A D | mlxreg-fan.rst | 23 fan2 (tacho2) 0xe5
|
| H A D | f71882fg.rst | 192 fan2 and pwm3 to fan3.
|
| H A D | w83792d.rst | 84 6 fan2
|
| H A D | f71805f.rst | 180 fan2 and pwm3 to fan3. Temperature mode also requires that temp1 corresponds
|
| /linux/drivers/hwmon/ |
| H A D | w83792d.c | 107 0x47, /* contains FAN2 and FAN1 Divisor */
148 0x86, /* SmartFanI: Fan2 target value */
154 0x87, /* (bit7-4)SmartFan Fan2 tolerance */
163 { 0x86, /* SmartFanII: Fan2 temp point 1 */
164 0xE6, /* SmartFanII: Fan2 temp point 2 */
165 0xE7, /* SmartFanII: Fan2 temp point 3 */
166 0xE8 }, /* SmartFanII: Fan2 temp point 4 */
178 { 0x89, /* (bit3-0) SmartFanII: Fan2 Non-Stop */
179 0x89, /* (bit7-4) SmartFanII: Fan2 Level 1 */
180 0xE1, /* (bit7-4) SmartFanII: Fan2 Level 2 */
[all …]
|
| H A D | smsc47m1.c | 714 int fan1, fan2, fan3, pwm1, pwm2, pwm3; in smsc47m1_probe() local
748 fan2 = (smsc47m1_read_value(data, SMSC47M2_REG_TPIN2) in smsc47m1_probe()
757 fan2 = (smsc47m1_read_value(data, SMSC47M1_REG_TPIN(1)) in smsc47m1_probe()
762 if (!(fan1 || fan2 || fan3 || pwm1 || pwm2 || pwm3)) { in smsc47m1_probe()
786 if (fan2) { in smsc47m1_probe()
|
| /linux/Documentation/devicetree/bindings/hwmon/ |
| H A D | ti,lm87.yaml | 44 in7. Otherwise the pin is set as FAN2 input.
|
| /linux/drivers/leds/ |
| H A D | leds-mlxcpld.c | 139 "mlxcpld:fan2:green",
143 "mlxcpld:fan2:red",
|
| /linux/drivers/hwmon/pmbus/ |
| H A D | bpa-rs600.c | 28 * only one fan in the module. Mask out the FAN2 bits. in bpa_rs600_read_byte_data()
|
| /linux/tools/thermal/tmon/ |
| H A D | tmon.8 | 113 Samples TargetTemp acpitz0 acpitz1 Fan0 Fan1 Fan2 Fan3 Fan4 Fan5
|
| /linux/drivers/platform/mellanox/ |
| H A D | nvsw-sn2201.c | 435 .label = "fan2",
648 .label = "fan2:green",
653 .label = "fan2:orange",
|
| /linux/drivers/platform/x86/ |
| H A D | mlx-platform.c | 734 .label = "fan2",
1000 .label = "fan2",
1141 .label = "fan2",
2561 .label = "fan2:green",
2566 .label = "fan2:red",
2736 .label = "fan2:green",
2743 .label = "fan2:orange",
2864 .label = "fan2:green",
2869 .label = "fan2:red",
2942 .label = "fan2:green",
[all …]
|
| /linux/arch/arm/boot/dts/marvell/ |
| H A D | armada-388-helios4.dts | 134 fan2: j17-pwm { label
|