| /freebsd/sys/contrib/device-tree/Bindings/phy/ |
| H A D | apm-xgene-phy.txt | 1 * APM X-Gene 15Gbps Multi-purpose PHY nodes
3 PHY nodes are defined to describe on-chip 15Gbps Multi-purpose PHY. Each
7 - compatible : Shall be "apm,xgene-phy".
8 - reg : PHY memory resource is the SDS PHY access resource.
9 - #phy-cells : Shall be 1 as it expects one argument for setting
14 - status : Shall be "ok" if enabled or "disabled" if disabled.
16 - clocks : Reference to the clock entry.
17 - apm,tx-eye-tuning : Manual control to fine tune the capture of the serial
19 Two set of 3-tuple setting for each (up to 3)
22 - apm,tx-eye-direction : Eye tuning manual control direction. 0 means sample
[all …]
|
| H A D | apm,xgene-phy.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/phy/apm,xgene-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: APM X-Gene 15Gbps Multi-purpose PHY
10 - Khuong Dinh <khuong@os.amperecomputing.com>
13 PHY nodes are defined to describe on-chip 15Gbps Multi-purpose PHY. Each
19 - const: apm,xgene-phy
24 '#phy-cells':
32 apm,tx-eye-tuning:
[all …]
|
| /freebsd/share/man/man4/ |
| H A D | mvs.4 | 35 .Bd -ragged -offset indent
43 .Xr loader.conf 5 :
44 .Bd -literal -offset indent
50 .Bl -ohang
55 Non-zero value enables CCC and defines maximum time (in us), request can wait
69 .Bl -tag -width 4n -offset indent -compact
76 .It 5
82 A manual bus reset is needed on device hot-plug.
85 Values 1, 2 and 3 are respectively 1.5, 3 and 6Gbps.
92 ports of several generations (Gen-I/II/IIe) of Marvell SATA controllers.
[all …]
|
| H A D | ice.4 | 2 .\" SPDX-License-Identifier: BSD-3-Clause
4 .\" Copyright (c) 2019-2020, Intel Corporation
35 .Dd November 5, 2025
46 .Xr loader.conf 5 :
56 .Xr sysctl.conf 5
58 .Xr loader.conf 5 :
73 .Bl -bullet -compact
91 .Sx Link-Level Flow Control
113 .Sx Optics and auto-negotiation
115 .Sx PCI-Express Slot Bandwidth
[all …]
|
| H A D | siis.4 | 35 .Bd -ragged -offset indent
43 .Xr loader.conf 5 :
44 .Bd -literal -offset indent
50 .Bl -ohang
58 .Bl -tag -width 2n -offset indent
67 A manual bus reset is needed on device hot-plug.
70 Values 1, 2 and 3 are respectively 1.5, 3 and 6Gbps.
79 Most of the bus-management details are handled by the SATA-specific
90 Port Multipliers (including FIS-based switching), hardware command queues
92 device hot-plug and Message Signaled Interrupts.
[all …]
|
| H A D | ahci.4 | 1 .\" Copyright (c) 2009-2013 Alexander Motin <mav@FreeBSD.org>
35 .Bd -ragged -offset indent
43 .Xr loader.conf 5 :
44 .Bd -literal -offset indent
50 .Bl -ohang
54 .Bl -tag -width 4n -offset indent -compact
64 Non-zero value enables CCC and defines maximum time (in ms), request can wait
84 .Bl -tag -width 4n -offset indent -compact
95 .It 5
101 4 and 5 is much smaller then in modes 2 and 3.
[all …]
|
| H A D | ata.4 | 34 .Bd -ragged -offset indent
41 .Xr loader.conf 5 :
42 .Bd -literal -offset indent
73 The next three lines are generic bus-specific drivers.
74 The rest are vendor-specific PCI drivers.
78 .Bl -ohang
93 .Bl -tag -width 4n -offset indent -compact
103 Values 1, 2 and 3 are respectively 1.5, 3 and 6Gbps.
117 Most of the bus-management details are handled by the ATA/SATA-specific
129 Device hot-plug and SATA interface power management is supported only on
[all …]
|
| /freebsd/sys/ofed/include/rdma/ |
| H A D | opa_port_info.h | 1 /*-
2 * SPDX-License-Identifier: BSD-2-Clause OR GPL-2.0
16 * - Redistributions of source code must retain the above
20 * - Redistributions in binary form must reproduce the above
48 #define OPA_PORT_LTP_CRC_MODE_14 1 /* 14-bit LTP CRC mode (optional) */
49 #define OPA_PORT_LTP_CRC_MODE_16 2 /* 16-bit LTP CRC mode */
50 #define OPA_PORT_LTP_CRC_MODE_48 4 /* 48-bit LTP CRC mode (optional) */
51 #define OPA_PORT_LTP_CRC_MODE_PER_LANE 8 /* 12/16-bit per lane LTP CRC mode */
59 #define OPA_LINKDOWN_REASON_BAD_SLID 5
60 #define OPA_LINKDOWN_REASON_BAD_DLID 6
[all …]
|
| /freebsd/contrib/ofed/libibmad/ |
| H A D | dump.c | 2 * Copyright (c) 2004-2009 Voltaire Inc. All rights reserved.
4 * Copyright (c) 2009-2011 Mellanox Technologies LTD. All rights reserved.
17 * - Redistributions of source code must retain the above
21 * - Redistributions in binary form must reproduce the above
60 case 5: in mad_dump_int()
61 case 6: in mad_dump_int()
85 case 5: in mad_dump_uint()
86 case 6: in mad_dump_uint()
112 case 5: in mad_dump_hex()
116 case 6: in mad_dump_hex()
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/net/dsa/ |
| H A D | ocelot.txt | 5 -----
9 - VSC9959 (Felix)
10 - VSC9953 (Seville)
13 larger ENETC root complex. As a result, the ethernet-switch node is a sub-node
25 For the external switch ports, depending on board configuration, "phy-mode" and
26 "phy-handle" are populated by board specific device tree instances. Ports 4 and
27 5 are fixed as internal ports in the NXP LS1028A instantiation.
32 By default, in fsl-ls1028a.dtsi, the NPI port is assigned to the internal
33 2.5Gbps port@4, but can be moved to the 1Gbps port@5, depending on the specific
39 Any port can be disabled (and in fsl-ls1028a.dtsi, they are indeed all disabled
[all …]
|
| H A D | nxp,sja1105.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schema
[all...] |
| H A D | mediatek,mt7530.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Arınç ÜNAL <arinc.unal@arinc9.com>
11 - Landen Chao <Landen.Chao@mediatek.com>
12 - DENG Qingfang <dqfext@gmail.com>
13 - Sean Wang <sean.wang@mediatek.com>
14 - Daniel Golle <daniel@makrotopia.org>
17 There are three versions of MT7530, standalone, in a multi-chip module and
18 built-into a SoC.
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/media/i2c/ |
| H A D | maxim,max96717.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
4 ---
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
8 title: MAX96717 CSI-2 to GMSL2 Serializer
11 - Julien Massot <julien.massot@collabora.com>
14 The MAX96717 serializer converts MIPI CSI-2 D-PHY formatted input
16 simultaneously transmit bidirectional control-channel data while forward
18 remotely located deserializer using industry-standard coax or STP
25 The GMSL2 serial link operates at a fixed rate of 3Gbps or 6Gbps in the
27 MAX96717F only supports a fixed rate of 3Gbps in the forward direction.
[all …]
|
| H A D | maxim,max96714.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
4 ---
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
8 title: Maxim MAX96714 GMSL2 to CSI-2 Deserializer
11 - Julien Massot <julien.massot@collabora.com>
15 CSI-2 D-PHY formatted output. The device allows the GMSL2 link to
16 simultaneously transmit bidirectional control-channel data while forward
18 remotely located serializer using industry-standard coax or STP
23 The GMSL2 serial link operates at a fixed rate of 3Gbps or 6Gbps in the
25 MAX96714F only supports a fixed rate of 3Gbps in the forward direction.
[all …]
|
| /freebsd/contrib/ofed/opensm/opensm/ |
| H A D | osm_helper.c | 2 * Copyright (c) 2004-2009 Voltaire, Inc. All rights reserved.
3 * Copyright (c) 2002-2015 Mellanox Technologies LTD. All rights reserved.
4 * Copyright (c) 1996-2003 Intel Corporation. All rights reserved.
18 * - Redistributions of source code must retain the above
22 * - Redistributions in binary form must reproduce the above
63 /* we use two tables - one for queries and one for responses */
70 "RESERVED", /* 5 */
71 "SubnAdmReport", /* 6 */
90 #define OSM_SA_METHOD_STR_UNKNOWN_VAL (ARR_SIZE(ib_sa_method_str) - 1)
124 "SubnTrap", /* 5 */
[all …]
|
| /freebsd/sys/contrib/device-tree/src/arm64/marvell/ |
| H A D | armada-8040-puzzle-m801.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 * Device Tree file for IEI Puzzle-M801
9 #include "armada-8040.dtsi"
11 #include <dt-bindings/gpio/gpio.h>
12 #include <dt-bindings/leds/common.h>
15 model = "IEI-Puzzle-M801";
16 …compatible = "iei,puzzle-m801", "marvell,armada8040", "marvell,armada-ap806-quad", "marvell,armada…
28 stdout-path = "serial0:115200n8";
37 v_3_3: regulator-3-3v {
38 compatible = "regulator-fixed";
[all …]
|
| /freebsd/contrib/ofed/libibverbs/examples/ |
| H A D | devinfo.c | 15 * - Redistributions of source code must retain the above
19 * - Redistributions in binary form must reproduce the above
51 return !(gid->raw[8] | gid->raw[9] | gid->raw[10] | gid->raw[11] | in null_gid()
52 gid->raw[12] | gid->raw[13] | gid->raw[14] | gid->raw[15]); in null_gid()
95 case 5: return "LINK_UP"; in port_phy_state_str()
96 case 6: return "LINK_ERROR_RECOVERY"; in port_phy_state_str()
139 case 1: return "2.5 Gbps"; in speed_str()
140 case 2: return "5.0 Gbps"; in speed_str()
143 case 8: return "10.0 Gbps"; in speed_str()
145 case 16: return "14.0 Gbps"; in speed_str()
[all …]
|
| /freebsd/sys/dev/mpr/ |
| H A D | mpr_table.c | 1 /*-
76 //SLM-Add new PCIe info to all of these tables
128 {"1.5Gbps", 0x08},
129 {"3.0Gbps", 0x09},
130 {"6.0Gbps", 0x0a},
131 {"12.0Gbps", 0x0b},
150 {"I-T Nexus Loss Timer", 0x06},
264 "\20" "\4SataHost" "\5SmpInit" "\6StpInit" "\7SspInit" in mpr_describe_devinfo()
280 mpr_describe_table(mpr_whoinit_names, facts->WhoInit)); in mpr_print_iocfacts()
286 facts->IOCCapabilities, "\20" "\3ScsiTaskFull" "\4DiagTrace" in mpr_print_iocfacts()
[all …]
|
| /freebsd/sys/dev/pms/RefTisa/tisa/api/ |
| H A D | titypes.h | 2 *Copyright (c) 2014 PMC-Sierra, Inc. All rights reserved.
185 #define DIF_VERIFY_UDT_REPLACE_CRC 5
193 #define DIF_ACTION_FLAG_MASK 0x00000007 /* 0 - 2 */
196 #define DIF_CRC_IO_SEED 0x00000020 /* 5 */
197 #define DIF_UDT_REF_BLOCK_COUNT 0x00000040 /* 6 */
201 #define DIF_CUST_APP_TAG 0x00000C00 /* 10 - 11 */
202 #define DIF_FLAG_RESERVED 0x0000F000 /* 12 - 15 */
203 #define DIF_DATA_BLOCK_SIZE_MASK 0x000F0000 /* 16 - 19 */
205 #define DIF_TAG_VERIFY_MASK 0x03F00000 /* 20 - 25 */
206 #define DIF_TAG_UPDATE_MASK 0xFC000000 /* 26 - 31 */
[all …]
|
| /freebsd/sys/dev/mps/ |
| H A D | mps_table.c | 1 /*-
2 * SPDX-License-Identifier: BSD-2-Clause
118 {"1.5Gbps", 0x08},
119 {"3.0Gbps", 0x09},
120 {"6.0Gbps", 0x0a},
139 {"I-T Nexus Loss Timer", 0x06},
243 "\20" "\4SataHost" "\5SmpInit" "\6StpInit" "\7SspInit" in mps_describe_devinfo()
260 mps_describe_table(mps_whoinit_names, facts->WhoInit)); in mps_print_iocfacts()
266 facts->IOCCapabilities, "\20" "\3ScsiTaskFull" "\4DiagTrace" in mps_print_iocfacts()
267 "\5SnapBuf" "\6ExtBuf" "\7EEDP" "\10BiDirTarg" "\11Multicast" in mps_print_iocfacts()
[all …]
|
| /freebsd/sys/netinet/ |
| H A D | tcp_ratelimit.c | 1 /*-
3 * SPDX-License-Identifier: BSD-3-Clause
5 * Copyright (c) 2018-2020
73 * Why do the rates cluster in the 1-100Mbps range more
81 * Chelsio - Supporting 16 configurable rates.
82 * Mlx - c4 supporting 13 fixed rates.
83 * Mlx - c5 & c6 supporting 127 configurable rates.
113 * by the hardware will cause a 390 micro-second gap between
115 * would need 416 micro-seconds gap between each send.
126 * delta between the two rates (416 - 390) divided into the rate
[all …]
|
| /freebsd/sys/dev/isp/ |
| H A D | isp_ioctl.h | 1 /*-
2 * SPDX-License-Identifier: BSD-2-Clause
4 * Copyright (c) 1997-2006 by Matthew Jacob
32 #define ISP_IOC (021) /* 'Ctrl-Q' */
36 * Note that this is not a simple integer level- see ispvar.h for definitions.
72 #define ISP_GETROLE _IOR(ISP_IOC, 5, int)
93 #define ISP_FPHCCMCPLT 5
94 #define ISP_RSCCHIWAT 6
99 #define ISP_GET_STATS _IOR(ISP_IOC, 6, isp_stats_t)
116 chan : 6,
[all …]
|
| /freebsd/sys/contrib/ncsw/inc/ |
| H A D | enet_ext.h | 1 /* Copyright (c) 2008-2012 Freescale Semiconductor, Inc
45 #define ENET_NUM_OCTETS_PER_ADDRESS 6 /**< Number of octets (8-bit bytes) in an ethernet addres…
65 @Description Ethernet MAC-PHY Interface
83 auto-negotiation between MAC and phy
85 Note: 1000BaseX auto-negotiation relates
87 SGMII phy can still synchronize with far-end phy
95 e_ENET_HALF_DUPLEX, /**< Half-Duplex mode */
96 e_ENET_FULL_DUPLEX /**< Full-Duplex mode */
106 e_ENET_SPEED_1000 = E_ENET_SPEED_1000, /**< 1000 Mbps = 1 Gbps */
107 e_ENET_SPEED_2500 = E_ENET_SPEED_2500, /**< 2500 Mbps = 2.5 Gbps */
[all …]
|
| /freebsd/sys/dev/igc/ |
| H A D | igc_mac.c | 1 /*-
4 * SPDX-License-Identifier: BSD-3-Clause
13 * igc_init_mac_ops_generic - Initialize MAC function pointers
16 * Setups up the function pointers to no-op functions
20 struct igc_mac_info *mac = &hw->mac; in igc_init_mac_ops_generic()
24 mac->ops.init_params = igc_null_ops_generic; in igc_init_mac_ops_generic()
25 mac->ops.config_collision_dist = igc_config_collision_dist_generic; in igc_init_mac_ops_generic()
26 mac->ops.rar_set = igc_rar_set_generic; in igc_init_mac_ops_generic()
30 * igc_null_ops_generic - No-op function, returns 0
40 * igc_null_mac_generic - No-op function, return void
[all …]
|
| /freebsd/sys/dev/e1000/ |
| H A D | README | 9 - Overview
10 - Identifying Your Adapter
11 - Building and Installation
12 - Additional Features and Configurations
13 - Known Issues/Troubleshooting
14 - Support
15 - License
21 been developed for use with all community-supported versions of FreeBSD.
33 - The igb driver supports all 82575 and 82576-based gigabit network connections.
34 - The em driver supports all other gigabit network connections.
[all …]
|