Lines Matching +full:5 +full:- +full:6 +full:gbps

35 .Bd -ragged -offset indent
43 .Xr loader.conf 5 :
44 .Bd -literal -offset indent
50 .Bl -ohang
55 Non-zero value enables CCC and defines maximum time (in us), request can wait
69 .Bl -tag -width 4n -offset indent -compact
76 .It 5
82 A manual bus reset is needed on device hot-plug.
85 Values 1, 2 and 3 are respectively 1.5, 3 and 6Gbps.
92 ports of several generations (Gen-I/II/IIe) of Marvell SATA controllers.
94 target, or, if HBA supports Port Multipliers (Gen-II/IIe), 16 targets.
95 Most of the bus-management details are handled by the SATA-specific
106 Port Multipliers (including FIS-based switching, when supported),
108 Native Command Queuing, SATA interface Power Management, device hot-plug
115 Gen-I (SATA 1.5Gbps):
116 .Bl -bullet -compact -offset "xxxxxx"
127 Gen-II (SATA 3Gbps, NCQ, PMP):
128 .Bl -bullet -compact -offset "xxxxxx"
139 Gen-IIe (SATA 3Gbps, NCQ, PMP with FBS):
140 .Bl -bullet -compact -offset "xxxxxx"
153 Note, that this hardware supports command queueing and FIS-based switching
155 ATAPI and non-DMA ATA commands executed one by one for each port.