/freebsd/sys/contrib/device-tree/Bindings/phy/ |
H A D | apm-xgene-phy.txt | 1 * APM X-Gene 15Gbps Multi-purpose PHY nodes 3 PHY nodes are defined to describe on-chip 15Gbps Multi-purpose PHY. Each 11 1 (SGMII), 2 (PCIe), 3 (USB), and 4 (XFI). 19 Two set of 3-tuple setting for each (up to 3) 25 Two set of 3-tuple setting for each (up to 3) 27 - apm,tx-boost-gain : Frequency boost AC (LSB 3-bit) and DC (2-bit) 28 gain control. Two set of 3-tuple setting for each 29 (up to 3) supported link speed on the host. Range is 30 between 0 to 31 in unit of dB. Default is 3. 31 - apm,tx-amplitude : Amplitude control. Two set of 3-tuple setting for [all …]
|
/freebsd/sys/contrib/device-tree/Bindings/media/i2c/ |
H A D | maxim,max96712.yaml | 21 Each GMSL2 serial link operates at a fixed rate of 3Gbps or 6Gbps in the 23 MAX96712 can be paired with first-generation 3.12Gbps or 1.5Gbps GMSL1 24 serializers or operate up to 3.12Gbps with GMSL2 serializers in GMSL1 mode. 52 port@3: 54 description: GMSL Input 3 112 data-lanes = <1 2 3 4>;
|
H A D | maxim,max96717.yaml | 25 The GMSL2 serial link operates at a fixed rate of 3Gbps or 6Gbps in the 27 MAX96717F only supports a fixed rate of 3Gbps in the forward direction. 123 data-lanes = <1 2 3 4>; 149 data-lanes = <1 2 3 4>;
|
H A D | maxim,max96714.yaml | 23 The GMSL2 serial link operates at a fixed rate of 3Gbps or 6Gbps in the 25 MAX96714F only supports a fixed rate of 3Gbps in the forward direction. 132 data-lanes = <1 2 3 4>;
|
H A D | sony,imx214.txt | 7 throughput of 1.2Gbps/lane. 48 data-lanes = <1 2 3 4>;
|
H A D | sony,imx214.yaml | 16 maximum throughput of 1.2Gbps/lane. 72 - const: 3 117 data-lanes = <1 2 3 4>;
|
/freebsd/share/man/man4/ |
H A D | mvs.4 | 85 Values 1, 2 and 3 are respectively 1.5, 3 and 6Gbps. 115 Gen-I (SATA 1.5Gbps): 127 Gen-II (SATA 3Gbps, NCQ, PMP): 139 Gen-IIe (SATA 3Gbps, NCQ, PMP with FBS):
|
H A D | xhci.4 | 50 connection speeds from 5.0Gbps and above when using USB 3.x 58 subclass 3 (USB) and programming interface 48 (XHCI).
|
H A D | siis.4 | 70 Values 1, 2 and 3 are respectively 1.5, 3 and 6Gbps.
|
/freebsd/contrib/ofed/libibmad/ |
H A D | dump.c | 56 case 3: in mad_dump_int() 81 case 3: in mad_dump_uint() 106 case 3: in mad_dump_hex() 142 case 3: in mad_dump_rhex() 215 else if (bufsz > 3) in dump_linkwidth() 227 case 3: in mad_dump_linkwidthsup() 262 snprintf(buf, bufsz, "2.5 Gbps"); in mad_dump_linkspeed() 265 snprintf(buf, bufsz, "5.0 Gbps"); in mad_dump_linkspeed() 268 snprintf(buf, bufsz, "10.0 Gbps"); in mad_dump_linkspeed() 281 n += snprintf(buf + n, bufsz - n, "2.5 Gbps or "); in dump_linkspeed() [all …]
|
/freebsd/sys/contrib/device-tree/src/arm64/marvell/ |
H A D | armada-8040-puzzle-m801.dts | 37 v_3_3: regulator-3-3v { 80 los-gpios = <&sfpplus_gpio 3 GPIO_ACTIVE_HIGH>; 108 /* SFP+ port 2: 10 Gbps indicator */ 114 led-3 { 115 /* SFP+ port 2: 1 Gbps indicator */ 117 function-enumerator = <3>; 122 /* SFP+ port 1: 10 Gbps indicator */ 129 /* SFP+ port 1: 1 Gbps indicator */
|
/freebsd/sys/netinet/ |
H A D | tcp_ratelimit.c | 3 * SPDX-License-Identifier: BSD-3-Clause 153 375000, /* 3Mbps - rate 3 */ 208 125000000, /* 1Gbps - rate 59 */ 212 250000000, /* 2Gbps - rate 63 */ 214 312500000, /* 2.5Gbps - rate 65 */ 215 343750000, /* 2.75Gbps - rate 66 */ 216 375000000, /* 3Gbps - rate 67 */ 217 500000000, /* 4Gbps - rate 68 */ 218 625000000, /* 5Gbps - rate 69 */ 219 750000000, /* 6Gbps - rate 70 */ [all …]
|
/freebsd/sys/ofed/include/rdma/ |
H A D | opa_port_info.h | 57 #define OPA_LINKDOWN_REASON_PKT_TOO_LONG 3 114 /* 3-7; 11-15 reserved; 8-15 cleared on Polling->LinkUp */ 123 #define OPA_LINK_SPEED_NOP 0x0000 /* Reserved (1-5 Gbps) */ 124 #define OPA_LINK_SPEED_12_5G 0x0001 /* 12.5 Gbps */ 125 #define OPA_LINK_SPEED_25G 0x0002 /* 25.78125? Gbps (EDR) */ 136 #define OPA_CAP_MASK3_IsSharedSpaceSupported (1 << 3) 153 OPA_PORT_PHYS_CONF_VARIABLE = 3, 251 OPA_PI_MASK_BUF_UNIT_CREDIT_ACK = (0x00000003 << 3), 263 OPA_PI_MASK_NEIGH_MGMT_ALLOWED = (0x01 << 3), 293 u8 cap; /* 3 res, 5 bits */ [all …]
|
/freebsd/contrib/ofed/opensm/opensm/ |
H A D | osm_helper.c | 68 "RESERVED", /* 3 */ 122 "RESERVED3", /* 3 */ 160 "InformInfo", /* 3 */ 199 "InformInfo", /* 3 */ 254 "MultiPathRecord", /* 3A */ 255 "ServiceAssociationRecord", /* 3B */ 256 "UNKNOWN", /* 3C */ 257 "UNKNOWN", /* 3D */ 258 "UNKNOWN", /* 3E */ 259 "UNKNOWN", /* 3F */ [all …]
|
/freebsd/sys/contrib/device-tree/Bindings/net/dsa/ |
H A D | ocelot.txt | 33 2.5Gbps port@4, but can be moved to the 1Gbps port@5, depending on the specific 50 * phy_mode = "sgmii": on ports 0, 1, 2, 3 51 * phy_mode = "qsgmii": on ports 0, 1, 2, 3 52 * phy_mode = "usxgmii": on ports 0, 1, 2, 3 53 * phy_mode = "2500base-x": on ports 0, 1, 2, 3 90 port@3 { 91 reg = <3>; 133 * phy_mode = "sgmii": on ports 0, 1, 2, 3, 4, 5, 6, 7 134 * phy_mode = "qsgmii": on ports 0, 1, 2, 3, 4, 5, 6, 7 165 port@3 {
|
/freebsd/contrib/ofed/libibverbs/examples/ |
H A D | devinfo.c | 93 case 3: return "DISABLED"; in port_phy_state_str() 139 case 1: return "2.5 Gbps"; in speed_str() 140 case 2: return "5.0 Gbps"; in speed_str() 143 case 8: return "10.0 Gbps"; in speed_str() 145 case 16: return "14.0 Gbps"; in speed_str() 146 case 32: return "25.0 Gbps"; in speed_str() 147 case 64: return "50.0 Gbps"; in speed_str() 157 case 3: return "4"; in vl_str() 178 …printf("\t\t\tGID[%3d]:\t\t%02x%02x:%02x%02x:%02x%02x:%02x%02x:%02x%02x:%02x%02x:%02x%02x:%02x%02x… in print_all_port_gids() 181 gid.raw[ 2], gid.raw[ 3], in print_all_port_gids() [all …]
|
/freebsd/sys/dev/iavf/ |
H A D | iavf_vc_common.c | 1 /* SPDX-License-Identifier: BSD-3-Clause */ 15 * 3. Neither the name of the Intel Corporation nor the names of its 1079 return "100 Gbps"; in iavf_ext_speed_to_str() 1081 return "50 Gbps"; in iavf_ext_speed_to_str() 1083 return "40 Gbps"; in iavf_ext_speed_to_str() 1085 return "25 Gbps"; in iavf_ext_speed_to_str() 1087 return "20 Gbps"; in iavf_ext_speed_to_str() 1089 return "10 Gbps"; in iavf_ext_speed_to_str() 1091 return "5 Gbps"; in iavf_ext_speed_to_str() 1093 return "2.5 Gbps"; in iavf_ext_speed_to_str() [all …]
|
/freebsd/contrib/ofed/infiniband-diags/src/ |
H A D | ibportstate.c | 342 ("Peer ports operating at active speed %d rather than 4 (10.0 Gbps)", in validate_speed() 347 ("Peer ports operating at active speed %d rather than 2 (5.0 Gbps)", in validate_speed() 352 ("Peer ports operating at active speed %d rather than 1 (2.5 Gbps)", in validate_speed() 362 ("Peer ports operating at active extended speed %d rather than 2 (25.78125 Gbps)", in validate_extended_speed() 367 ("Peer ports operating at active extended speed %d rather than 1 (14.0625 Gbps)", in validate_extended_speed() 374 int mgmt_classes[3] = in main() 402 "3 1 disable\t\t\t# by lid", in main() 405 "3 1 reset\t\t\t# by lid", in main() 406 "3 1 speed 1\t\t\t# by lid", in main() 407 "3 1 width 1\t\t\t# by lid", in main() [all …]
|
/freebsd/sys/contrib/ncsw/inc/flib/ |
H A D | fsl_enet.h | 60 E_ENET_SPEED_1000 = 1000, /**< 1000 Mbps = 1 Gbps */ 61 E_ENET_SPEED_2500 = 2500, /**< 2500 Mbps = 2.5 Gbps */ 62 E_ENET_SPEED_10000 = 10000 /**< 10000 Mbps = 10 Gbps */ 262 ((uint64_t)(_enet_addr)[3] << 16) | \
|
/freebsd/sys/dev/pms/RefTisa/tisa/api/ |
H A D | titypes.h | 184 #define DIF_VERIFY_REPLACE 3 194 #define DIF_CRC_VERIFICATION 0x00000008 /* 3 */ 233 Bit 0-3: Connection Rate field when opening the device. 236 08h: 1,5 Gbps 237 09h: 3,0 Gbps 238 0ah: 6.0 Gbps 577 bit32 reserved[3]; /* reserved */
|
/freebsd/tools/tools/netmap/ |
H A D | pkt-gen.8 | 133 .Xr pthread_setaffinity_np 3 . 171 is able to completely use all of the bandwidth of a 10 or 40Gbps link, 260 Most modern network interfaces that support 10Gbps and higher speeds
|
/freebsd/sys/contrib/ncsw/inc/ |
H A D | enet_ext.h | 106 e_ENET_SPEED_1000 = E_ENET_SPEED_1000, /**< 1000 Mbps = 1 Gbps */ 107 e_ENET_SPEED_2500 = E_ENET_SPEED_2500, /**< 2500 Mbps = 2.5 Gbps */ 108 e_ENET_SPEED_10000 = E_ENET_SPEED_10000 /**< 10000 Mbps = 10 Gbps */ 193 ((uint64_t)(_enetAddr)[3] << 16) | \
|
/freebsd/sys/contrib/device-tree/Bindings/usb/ |
H A D | microchip,usb5744.yaml | 15 controller, so 5 Gbps SuperSpeed data transfers are not affected by slower 40 3V3 power supply to the hub 100 reset-gpios = <&gpio 3 GPIO_ACTIVE_LOW>; 109 reset-gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
|
/freebsd/sys/dev/mpr/ |
H A D | mpr_table.c | 128 {"1.5Gbps", 0x08}, 129 {"3.0Gbps", 0x09}, 130 {"6.0Gbps", 0x0a}, 131 {"12.0Gbps", 0x0b}, 286 facts->IOCCapabilities, "\20" "\3ScsiTaskFull" "\4DiagTrace" in mpr_print_iocfacts() 380 "\1Loop" "\2UnaddressableDev" "\3DupSasAddr" "\5SmpTimeout" in mpr_print_evt_sas()
|
/freebsd/sys/contrib/device-tree/Bindings/net/ |
H A D | renesas,ethertsn.yaml | 14 Gbps full-duplex link via MII/GMII/RMII/RGMII. Depending on the connected PHY. 124 compatible = "ethernet-phy-ieee802.3-c45"; 127 interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
|