/linux/Documentation/input/devices/ |
H A D | cma3000_d0x.rst | 33 which includes time and g value. Refer product specifications for 59 G range in milli g i.e 2000 or 8000 65 Motion detect g range threshold value 71 Free fall g range threshold value 88 Fuzz 200 93 Fuzz 200 98 Fuzz 200 122 2000: 2000 mg or 2G Range 123 8000: 8000 mg or 8G Range 127 X: X * 71mg (8G Range) [all …]
|
/linux/Documentation/devicetree/bindings/iio/accel/ |
H A D | adi,adxl372.yaml | 7 title: Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer 13 Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer that supports
|
/linux/Documentation/devicetree/bindings/phy/ |
H A D | ti,phy-j721e-wiz.yaml | 16 - ti,j721e-wiz-16g 17 - ti,j721e-wiz-10g 18 - ti,j721s2-wiz-10g 19 - ti,am64-wiz-10g 20 - ti,j7200-wiz-10g 21 - ti,j784s4-wiz-10g 72 of 200 ms. However, some solutions might need more than 200 ms. 192 const: ti,j7200-wiz-10g 204 compatible = "ti,j721e-wiz-16g";
|
/linux/drivers/net/ethernet/mellanox/mlx5/core/en/ |
H A D | port.c | 336 MLX5E_FEC_OVERRIDE_ADMIN_POLICY(pplm, *fec_policy, write, 25g); in mlx5e_fec_admin_field() 339 MLX5E_FEC_OVERRIDE_ADMIN_POLICY(pplm, *fec_policy, write, 50g); in mlx5e_fec_admin_field() 342 MLX5E_FEC_OVERRIDE_ADMIN_POLICY(pplm, *fec_policy, write, 56g); in mlx5e_fec_admin_field() 345 MLX5E_FEC_OVERRIDE_ADMIN_POLICY(pplm, *fec_policy, write, 100g); in mlx5e_fec_admin_field() 354 MLX5E_FEC_OVERRIDE_ADMIN_POLICY(pplm, *fec_policy, write, 200g_4x); in mlx5e_fec_admin_field() 363 MLX5E_FEC_OVERRIDE_ADMIN_POLICY(pplm, *fec_policy, write, 200g_2x); in mlx5e_fec_admin_field() 389 *fec_cap = MLX5E_GET_FEC_OVERRIDE_CAP(pplm, 25g); in mlx5e_get_fec_cap_field() 392 *fec_cap = MLX5E_GET_FEC_OVERRIDE_CAP(pplm, 50g); in mlx5e_get_fec_cap_field() 395 *fec_cap = MLX5E_GET_FEC_OVERRIDE_CAP(pplm, 56g); in mlx5e_get_fec_cap_field() 398 *fec_cap = MLX5E_GET_FEC_OVERRIDE_CAP(pplm, 100g); in mlx5e_get_fec_cap_field() [all …]
|
/linux/arch/arm64/boot/dts/freescale/ |
H A D | imx93-kontron-osm-s.dtsi | 308 MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x57e /* ETH_A_(S)(R)(G)MII_RXD0 */ 309 MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x57e /* ETH_A_(S)(R)(G)MII_RXD1 */ 310 MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x57e /* ETH_A_(R)(G)MII_RXD2 */ 311 MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x57e /* ETH_A_(R)(G)MII_RXD3 */ 312 MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x5fe /* ETH_A_(R)(G)MII_RX_CLK */ 313 MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x57e /* ETH_A_(R)(G)MII_RX_DV(_ER) */ 314 MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x57e /* ETH_A_(S)(R)(G)MII_TXD0 */ 315 MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x57e /* ETH_A_(S)(R)(G)MII_TXD1 */ 316 MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2 0x57e /* ETH_A_(S)(R)(G)MII_TXD2 */ 317 MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3 0x57e /* ETH_A_(S)(R)(G)MII_TXD3 */ [all …]
|
H A D | imx8mm-kontron-osm-s.dtsi | 186 "ETH_MDC", "ETH_MDIO", "ETH_A_(S)(R)(G)MII_TXD3", 187 "ETH_A_(S)(R)(G)MII_TXD2", "ETH_A_(S)(R)(G)MII_TXD1", 188 "ETH_A_(S)(R)(G)MII_TXD0", "ETH_A_(R)(G)MII_TX_EN(_ER)", 189 "ETH_A_(R)(G)MII_TX_CLK", "ETH_A_(R)(G)MII_RX_DV(_ER)", 190 "ETH_A_(R)(G)MII_RX_CLK", "ETH_A_(S)(R)(G)MII_RXD0", 191 "ETH_A_(S)(R)(G)MII_RXD1", "ETH_A_(R)(G)MII_RXD2", 192 "ETH_A_(R)(G)MII_RXD3"; 513 MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f /* ETH_A_(S)(R)(G)MII_TXD3 */ 514 MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f /* ETH_A_(S)(R)(G)MII_TXD2 */ 515 MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f /* ETH_A_(S)(R)(G)MII_TXD1 */ [all …]
|
/linux/drivers/gpu/drm/panel/ |
H A D | panel-edp.c | 751 * throw in 200 ms to be safe. in panel_edp_set_conservative_timings() 754 desc->delay.enable = 200; in panel_edp_set_conservative_timings() 1050 .hpd_absent = 200, 1182 .hpd_absent = 200, 1195 .htotal = 1920 + 48 + 32 + 200, 1219 * - If HPD isn't hooked up you still have 200 ms delay. 1224 .hpd_absent = 200, 1282 .hpd_absent = 200, 1366 .hpd_absent = 200, 1393 .hpd_absent = 200, [all …]
|
/linux/drivers/eisa/ |
H A D | eisa.ids | 173 CPQ0571 "Compaq ProSignia 200 Server" 183 CPQ0671 "Compaq ProSignia 200" 321 CPQ92B3 "6/200 FlexSMP Dual Processor Board" 516 FSI2001 "ESA-200 ATM" 517 FSI2002 "ESA-200A ATM" 518 FSI2003 "ESA-200E ATM" 519 GCI0101 "Gateway G/Ethernet 32EB -- 32-Bit EISA Bus Master Ethernet Adpater" 520 GCI0102 "Gateway G/Ethernet 32EB -- 32-Bit EISA Bus Master Ethernet Adapter" 521 GCI0103 "Gateway G/Ethernet 32EB -- 32-Bit EISA Bus Master Ethernet Adapter" 620 ICU02B0 "D-Link DE-200" [all …]
|
/linux/Documentation/arch/s390/ |
H A D | monreader.rst | 42 Example: DEF STOR CONFIG 0.140M 200M.200M 45 address 0MB, the second is 200MB in size and begins at address 200MB, 73 there are other users already connected to the `*MONITOR` service (e.g. 93 This API provides no interface to control the `*MONITOR` service, e.g. specify
|
/linux/include/linux/extcon/ |
H A D | extcon-adc-jack.h | 24 * For example, if { .state = 0x3, .min_adc = 100, .max_adc = 200}, it means 25 * that if ADC value is between (inclusive) 100 and 200, than the cable 0 and 42 * the consumer. E.g. 'battery_voltage'
|
/linux/drivers/atm/ |
H A D | Kconfig | 84 Also, sometimes larger bursts lead to lower throughput, e.g. on an 252 tristate "FORE Systems 200E-series" 256 This is a driver for the FORE Systems 200E-series ATM adapter 257 cards. It simultaneously supports PCA-200E and SBA-200E models 284 conditions, e.g. when a fast host continuously submits very small
|
/linux/arch/arm/boot/dts/nxp/imx/ |
H A D | imx6ull-dhcom-picoitx.dts | 7 * DHCOR PCB number: 578-200 or newer 8 * DHCOM PCB number: 579-200 or newer 78 "DHCOM-G", "DHCOM-H", "", "",
|
H A D | imx6ull-dhcom-pdk2.dts | 7 * DHCOR PCB number: 578-200 or newer 8 * DHCOM PCB number: 579-200 or newer 30 enable-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>; /* GPIO G */ 149 /* 560-200 U1 */
|
/linux/Documentation/devicetree/bindings/sound/ |
H A D | cs35l33.txt | 43 Optional H/G Algorithm sub-node: 46 the internal H/G Algorithm. 48 - cirrus,hg-algo : Sub-node for internal Class H/G algorithm that 53 - cirrus,mem-depth : Memory depth for the Class H/G algorithm measured in 66 - cirrus,ldo-path-disable : This is a boolean property. If present, the H/G 70 - cirrus,ldo-entry-delay : The LDO entry delay in milliseconds before the H/G 72 from 0 to 7 for delays of 5ms, 10ms, 50ms, 100ms, 200ms, 500ms, 1000ms. 75 - cirrus,vp-hg-auto : This is a boolean property. When set, class H/G VPhg 78 - cirrus,vp-hg : Class H/G algorithm VPhg. Controls the H/G algorithm's
|
/linux/drivers/cpufreq/ |
H A D | powernow-k8.h | 89 * - lowest entry in the high fid table must be a <= 200MHz + 2 * the entry 91 * - the parts can only step at <= 200 MHz intervals, odd fid values are 92 * supported in revision G and later revisions. 104 #define MIN_FREQ_RESOLUTION 200 /* fids jump by 2 matching freq jumps by 200 */
|
H A D | s5pv210-cpufreq.c | 87 /* APLL M,P,S values for 1G/800Mhz */ 128 {0, L3, 200*1000}, 175 /* L0 : [1000/200/100][166/83][133/66][200/200] */ 178 /* L1 : [800/200/100][166/83][133/66][200/200] */ 181 /* L2 : [400/200/100][166/83][133/66][200/200] */ 184 /* L3 : [200/200/100][166/83][133/66][200/200] */ 294 * SCLKA2M(200/1=200)->(200/4=50)Mhz in s5pv210_target() 308 * 2. Change SCLKA2M(200Mhz)to SCLKMPLL in MFC_MUX, G3D MUX in s5pv210_target() 309 * (200/4=50)->(667/4=166)Mhz in s5pv210_target() 394 * to SCLKA2M(200Mhz) in MFC_MUX and G3D MUX in s5pv210_target() [all …]
|
/linux/Documentation/leds/ |
H A D | leds-blinkm.rst | 62 E.g.:: 67 $ echo 200 > blinkm-6-9-blue/brightness 80 E.g. below /sys/bus/i2c/devices/6-0009/blinkm 88 E.g.::
|
/linux/tools/perf/util/ |
H A D | svghelper.c | 101 * for longer recordings we want at least 200 units of width per second in open_svg() 162 fprintf(svgfile, "<g>\n"); in svg_ubox() 170 fprintf(svgfile, "</g>\n"); in svg_ubox() 181 fprintf(svgfile, "<g>\n"); in svg_lbox() 189 fprintf(svgfile, "</g>\n"); in svg_lbox() 200 fprintf(svgfile, "<g>\n"); in svg_fbox() 208 fprintf(svgfile, "</g>\n"); in svg_fbox() 226 fprintf(svgfile, "<g>\n"); in svg_blocked() 232 fprintf(svgfile, "</g>\n"); in svg_blocked() 247 fprintf(svgfile, "<g>\ in svg_running() [all...] |
/linux/drivers/pinctrl/intel/ |
H A D | pinctrl-jasperlake.c | 24 #define JSL_GPP(r, s, e, g) \ argument 29 .gpio_base = (g), \ 32 #define JSL_COMMUNITY(b, s, e, g) \ argument 33 INTEL_COMMUNITY_GPPS(b, s, e, g, JSL) 248 PINCTRL_PIN(200, "MLK_RSTB"), 302 JSL_GPP(0, 195, 200, INTEL_GPIO_BASE_NOMAP), /* HVCMOS */
|
H A D | pinctrl-alderlake.c | 30 #define ADL_GPP(r, s, e, g) \ argument 35 .gpio_base = (g), \ 38 #define ADL_N_COMMUNITY(b, s, e, g) \ argument 39 INTEL_COMMUNITY_GPPS(b, s, e, g, ADL_N) 41 #define ADL_S_COMMUNITY(b, s, e, g) \ argument 42 INTEL_COMMUNITY_GPPS(b, s, e, g, ADL_S) 256 PINCTRL_PIN(200, "GPPC_F_7"), 571 PINCTRL_PIN(200, "SNDW1_CLK"), 703 ADL_GPP(0, 200, 207, 320), /* GPP_S */ 718 ADL_S_COMMUNITY(3, 200, 269, adls_community4_gpps),
|
/linux/tools/perf/Documentation/ |
H A D | security.txt | 15 1. Download selinux-policy SRPM package (e.g. selinux-policy-3.14.4-48.fc31.src.rpm on FC31) 61 @@ -200,4 +200,6 @@ 132 processes. MAC policy settings (e.g. SELinux) can be loaded into the kernel 152 in /etc/sysctl.conf (e.g. kernel.perf_event_paranoid = <setting>)
|
/linux/drivers/net/ethernet/mellanox/mlx4/ |
H A D | en_selftest.c | 155 /* The device supports 100M, 1G, 10G, 20G, 40G and 56G speed */ in mlx4_en_test_speed() 183 msleep(200); in mlx4_en_ex_selftest()
|
/linux/tools/testing/selftests/bpf/progs/ |
H A D | btf_dump_test_case_syntax.c | 24 G = 1, enumerator 121 char g[16]; 139 printf_fn_t g; member 206 int g; member 226 void * restrict g; member 235 L = 200,
|
/linux/arch/arm/boot/dts/marvell/ |
H A D | Makefile | 61 armada-xp-crs305-1g-4s.dtb \ 62 armada-xp-crs305-1g-4s-bit.dtb \ 63 armada-xp-crs326-24g-2s.dtb \ 64 armada-xp-crs326-24g-2s-bit.dtb \ 85 kirkwood-4i-edge-200.dtb \
|
/linux/drivers/net/ethernet/sfc/falcon/ |
H A D | tenxpress.c | 28 /* We complain if we fail to see the link partner as 10G capable this many 117 /* 100M/1G PHY registers */ 209 schedule_timeout_uninterruptible(HZ / 5); /* 200ms */ in tenxpress_phy_init() 234 mdelay(200); in tenxpress_special_reset() 377 schedule_timeout_uninterruptible(LNPGA_PDOWN_WAIT); /* 200 ms */ in sfx7101_phy_fini()
|