| /freebsd/sys/contrib/device-tree/Bindings/net/bluetooth/ |
| H A D | ti,bluetooth.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - David Lechner <david@lechnology.com>
32 - ti,cc2560
33 - ti,wl1271-st
34 - ti,wl1273-st
35 - ti,wl1281-st
36 - ti,wl1283-st
37 - ti,wl1285-st
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/net/ |
| H A D | ti,bluetooth.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - David Lechner <david@lechnology.com>
32 - ti,cc2560
33 - ti,wl1271-st
34 - ti,wl1273-st
35 - ti,wl1281-st
36 - ti,wl1283-st
37 - ti,wl1285-st
[all …]
|
| H A D | hisilicon-femac.txt | 4 - compatible: should contain one of the following version strings:
5 * "hisilicon,hisi-femac-v1"
6 * "hisilicon,hisi-femac-v2"
7 and the soc string "hisilicon,hi3516cv300-femac".
8 - reg: specifies base physical address(s) and size of the device registers.
11 - interrupts: should contain the MAC interrupt.
12 - clocks: A phandle to the MAC main clock.
13 - resets: should contain the phandle to the MAC reset signal(required) and
15 - reset-names: should contain the reset signal name "mac"(required)
17 - phy-mode: see ethernet.txt [1].
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/pinctrl/ |
| H A D | pinctrl-st.txt | 1 *ST pin controller.
3 Each multi-function pin is controlled, driven and routed through the
5 and multiple alternate functions(ALT1 - ALTx) that directly connect
11 ST pinctrl driver controls PIO multiplexing block and also interacts with
14 GPIO bank can have one of the two possible types of interrupt-wirings.
20 | |----> [gpio-bank (n) ]
21 | |----> [gpio-bank (n + 1)]
22 [irqN]-- | irq-mux |----> [gpio-bank (n + 2)]
23 | |----> [gpio-bank (... )]
24 |_________|----> [gpio-bank (n + 7)]
[all …]
|
| H A D | pinctrl-stmfx.txt | 1 STMicroelectronics Multi-Function eXpander (STMFX) GPIO expander bindings
3 ST Multi-Function eXpander (STMFX) offers up to 24 GPIOs expansion.
7 - compatible: should be "st,stmfx-0300-pinctrl".
8 - #gpio-cells: should be <2>, the first cell is the GPIO number and the second
9 cell is the gpio flags in accordance with <dt-bindings/gpio/gpio.h>.
10 - gpio-controller: marks the device as a GPIO controller.
11 - #interrupt-cells: should be <2>, the first cell is the GPIO number and the
12 second cell is the interrupt flags in accordance with
13 <dt-bindings/interrupt-controller/irq.h>.
14 - interrupt-controller: marks the device as an interrupt controller.
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/dma/stm32/ |
| H A D | st,stm32-dma3.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/dma/stm32/st,stm32-dma3.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
22 described in "#dma-cells" property description below, using a three-cell
26 - Amelie Delaunay <amelie.delaunay@foss.st.com>
29 - $ref: /schemas/dma/dma-controller.yaml#
33 const: st,stm32mp25-dma3
36 maxItems: 1
42 Should contain all of the per-channel DMA interrupts in ascending order
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/clock/ |
| H A D | st,stm32-rcc.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/clock/st,stm32-rcc.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Dario Binacchi <dario.binacchi@amarulasolutions.com>
20 - items:
21 - enum:
22 - st,stm32f42xx-rcc
23 - st,stm32f746-rcc
24 - st,stm32h743-rcc
[all …]
|
| H A D | ux500.txt | 1 Clock bindings for ST-Ericsson Ux500 clocks
4 - compatible : shall contain only one of the following:
5 "stericsson,u8500-clks"
6 "stericsson,u8540-clks"
7 "stericsson,u9540-clks"
8 - reg : shall contain base register location and length for
13 - prcmu-clock: a subnode with one clock cell for PRCMU (power,
14 reset, control unit) clocks. The cell indicates which PRCMU
15 clock in the prcmu-clock node the consumer wants to use.
16 - prcc-periph-clock: a subnode with two clock cells for
[all …]
|
| H A D | stericsson,u8500-clks.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/clock/stericsson,u8500-clks.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: ST-Ericsson DB8500 (U8500) clocks
10 - Ulf Hansson <ulf.hansson@linaro.org>
11 - Linus Walleij <linus.walleij@linaro.org>
14 DB8500 digital baseband system-on-chip and its siblings such as
16 itself, not off-chip clocks. There are four different on-chip
17 clocks - RTC (32 kHz), CPU clock (SMP TWD), PRCMU (power reset and
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/remoteproc/ |
| H A D | st-rproc.txt | 1 STMicroelectronics Co-Processor Bindings
2 ----------------------------------------
4 This binding provides support for adjunct processors found on ST SoCs.
6 Co-processors can be controlled from the bootloader or the primary OS. If
7 the bootloader starts a co-processor, the primary OS must detect its state
11 - compatible Should be one of:
12 "st,st231-rproc"
13 "st,st40-rproc"
14 - memory-region Reserved memory (See: ../reserved-memory/reserved-memory.txt)
15 - resets Reset lines (See: ../reset/reset.txt)
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/pwm/ |
| H A D | pwm-st.txt | 2 --------------------------------------
5 - compatible : "st,pwm"
6 - #pwm-cells : Number of cells used to specify a PWM. First cell
7 specifies the per-chip index of the PWM to use and the
8 second cell is the period in nanoseconds - fixed to 2
10 - reg : Physical base address and length of the controller's
12 - pinctrl-names: Set to "default".
13 - pinctrl-0: List of phandles pointing to pin configuration nodes
15 For Pinctrl properties, please refer to [1].
16 - clock-names: Valid entries are "pwm" and/or "capture".
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/gpio/ |
| H A D | gpio-nmk.txt | 4 - compatible : Should be "st,nomadik-gpio".
5 - reg : Physical base address and length of the controller's registers.
6 - interrupts : The interrupt outputs from the controller.
7 - #gpio-cells : Should be two:
8 The first cell is the pin number.
9 The second cell is used to specify optional parameters:
10 - bits[3:0] trigger type and level flags:
11 1 = low-to-high edge triggered.
12 2 = high-to-low edge triggered.
13 4 = active high level-sensitive.
[all …]
|
| H A D | spear_spics.txt | 1 === ST Microelectronics SPEAr SPI CS Driver ===
4 Cell spi controller through its system registers, which otherwise remains under
17 * compatible: should be defined as "st,spear-spics-gpio"
19 * st-spics,peripcfg-reg: peripheral configuration register offset
20 * st-spics,sw-enable-bit: bit offset to enable sw control
21 * st-spics,cs-value-bit: bit offset to drive chipselect low or high
22 * st-spics,cs-enable-mask: chip select number bit mask
23 * st-spics,cs-enable-shift: chip select number program offset
24 * gpio-controller: Marks the device node as gpio controller
25 * #gpio-cells: should be 1 and will mention chip select number
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/interrupt-controller/ |
| H A D | marvell,icu.txt | 2 --------------------------------
5 responsible for collecting all wired-interrupt sources in the CP and
13 - compatible: Should be "marvell,cp110-icu"
15 - reg: Should contain ICU registers location and length.
22 - compatible: Should be one of:
23 * "marvell,cp110-icu-nsr"
24 * "marvell,cp110-icu-sr"
25 * "marvell,cp110-icu-sei"
26 * "marvell,cp110-icu-rei"
28 - #interrupt-cells: Specifies the number of cells needed to encode an
[all …]
|
| H A D | apple,aic2.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/interrupt-controller/apple,aic2.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Hector Martin <marcan@marcan.st>
18 - Level-triggered hardware IRQs wired to SoC blocks
19 - Single mask bit per IRQ
20 - Automatic masking on event delivery (auto-ack)
21 - Software triggering (ORed with hw line)
22 - Automatic prioritization (single event/ack register per CPU, lower IRQs =
[all …]
|
| H A D | apple,aic.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/interrupt-controller/apple,aic.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Hector Martin <marcan@marcan.st>
19 - Level-triggered hardware IRQs wired to SoC blocks
20 - Single mask bit per IRQ
21 - Per-IRQ affinity setting
22 - Automatic masking on event delivery (auto-ack)
23 - Software triggering (ORed with hw line)
[all …]
|
| H A D | mti,gic.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only
3 ---
4 $id: http://devicetree.org/schemas/interrupt-controller/mti,gic.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Paul Burton <paulburton@kernel.org>
11 - Thomas Bogendoerfer <tsbogend@alpha.franken.de>
15 It also supports local (per-processor) interrupts and software-generated
16 interrupts which can be used as IPIs. The GIC also includes a free-running
17 global timer, per-CPU count/compare timers, and a watchdog.
23 "#interrupt-cells":
[all …]
|
| /freebsd/contrib/one-true-awk/ |
| H A D | awkgram.y | 30 void checkdup(Node *list, Cell *item);
31 int yywrap(void) { return(1); } in yywrap()
36 int inloop = 0; /* >= 1 if in while, for, do; can't be bool, since loops can next */
43 Cell *cp;
71 %type <i> do st
88 %left '+' '-'
100 winner = (Node *)stat3(PROGRAM, beginloc, $1, endloc); }
126 { --inloop; $$ = stat4(FOR, $3, notnull($6), $9, $12); }
128 { --inloop; $$ = stat4(FOR, $3, NIL, $7, $10); }
130 { --inloop; $$ = stat3(IN, $3, makearr($5), $8); }
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/dma/ |
| H A D | fsl-edma.txt | 3 The eDMA channels have multiplex capability by programmble memory-mapped
10 - compatible :
11 - "fsl,vf610-edma" for eDMA used similar to that on Vybrid vf610 SoC
12 - "fsl,imx7ulp-edma" for eDMA2 used similar to that on i.mx7ulp
13 - "fsl,ls1028a-edma" followed by "fsl,vf610-edma" for eDMA used on the
15 - reg : Specifies base physical address(s) and size of the eDMA registers.
16 The 1st region is eDMA control register's address and size.
19 - interrupts : A list of interrupt-specifiers, one for each entry in
20 interrupt-names on vf610 similar SoC. But for i.mx7ulp per channel
21 per transmission interrupt, total 16 channel interrupt and 1
[all …]
|
| H A D | lpc1850-dmamux.txt | 4 - compatible: "nxp,lpc1850-dmamux"
5 - reg: Memory map for accessing module
6 - #dma-cells: Should be set to <3>.
7 * 1st cell contain the master dma request signal
8 * 2nd cell contain the mux value (0-3) for the peripheral
9 * 3rd cell contain either 1 or 2 depending on the AHB
11 - dma-requests: Number of DMA requests for the mux
12 - dma-masters: phandle pointing to the DMA controller
15 - dma-requests: Number of DMA requests the controller can handle
20 compatible = "nxp,lpc1850-gpdma", "arm,pl080", "arm,primecell";
[all …]
|
| /freebsd/sys/contrib/device-tree/src/arm/st/ |
| H A D | stm32mp133.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
3 * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
4 * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
14 reg-names = "m_can", "message_ram";
17 interrupt-names = "int0", "int1";
19 clock-names = "hclk", "cclk";
20 bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
27 reg-names = "m_can", "message_ram";
30 interrupt-names = "int0", "int1";
32 clock-names = "hclk", "cclk";
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/phy/ |
| H A D | st-spear-miphy.txt | 1 ST SPEAr miphy DT details
4 ST Microelectronics SPEAr miphy is a phy controller supporting PCIe and SATA.
7 - compatible : should be "st,spear1310-miphy" or "st,spear1340-miphy"
8 - reg : offset and length of the PHY register set.
9 - misc: phandle for the syscon node to access misc registers
10 - #phy-cells : from the generic PHY bindings, must be 1.
11 - cell[1]: 0 if phy used for SATA, 1 for PCIe.
14 - phy-id: Instance id of the phy. Only required when there are multiple phys
|
| H A D | st,spear1310-miphy.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/phy/st,spear1310-miphy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: ST SPEAr miphy
10 - Pratyush Anand <pratyush.anand@gmail.com>
13 ST Microelectronics SPEAr miphy is a phy controller supporting PCIe and SATA.
18 - st,spear1310-miphy
19 - st,spear1340-miphy
22 maxItems: 1
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/nvmem/ |
| H A D | st,stm32-romem.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/nvmem/st,stm32-romem.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: STMicroelectronics STM32 Factory-programmed data
10 This represents STM32 Factory-programmed read only non-volatile area: locked
11 flash, OTP, read-only HW regs... This contains various information such as:
16 - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
19 - $ref: nvmem.yaml#
20 - $ref: nvmem-deprecated-cells.yaml#
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/mailbox/ |
| H A D | brcm,iproc-flexrm-mbox.txt | 6 FlexRM driver will create a mailbox-controller instance for given FlexRM
10 --------------------
11 - compatible: Should be "brcm,iproc-flexrm-mbox"
12 - reg: Specifies base physical address and size of the FlexRM
14 - msi-parent: Phandles (and potential Device IDs) to MSI controllers
17 Refer devicetree/bindings/interrupt-controller/msi.txt
18 - #mbox-cells: Specifies the number of cells needed to encode a mailbox
21 The 1st cell is the mailbox channel number.
23 The 2nd cell contains MSI completion threshold. This is the
27 The 3rd cell contains MSI timer value representing time for
[all …]
|